Behavior of ar plasma formed in a high-density plasma source - an ecr reactor

In order to develop the ultra-large scale integration(ULSI), low pressure and high density plasma apparatus are required for etching and deposit of thin films. To understand critical parameters such as the pressure, temperature, electrostatic potential and energy distribution of ions impacting on the wafer, it is necessary to understand how these parameters are influenced by the power input and neutral gas pressure. In the present work, a 2-D hybrid electron fluid-particle ion model has been developed to simulate one of the high density plasma sources-an Electron Cyclotron Resonance (ECR) plasma system with various pressures and power inputs in a non-uniform magnetic field. By means of numerical simulation, the energy distributions of argon ion impacting on the wafer are obtained and the plasma density, electron temperature and plasma electrostatic potential are plotted in 3-D. It is concluded that the plasma density depends mainly on both the power input and neutral gas pressure. However, the plasma potential and electron temperature can hardly be affected by the power input, they seem to be primarily dependent on the neutral gas pressure. The comparison shows that the simulation results are qualitatively in good agreement with the experiment measurements.

Euskarazko irakaskuntza Goierrin XVIII. mendeko bigarren erdian

Kolokioaren agiriak : XVIII.mendea Euskal Herrian letretan eta historian: Baionan 2004ko azaroaren 18 eta 19an, Bonnat museoan / Actes du Colloque:Le XVIIIe siècle au Pays Basque à travers les lettres et l'histoire, Musée Bonnat, Bayonne, 18-19 novembre 2004.

爆炸变形定向战斗部壳体变形分析

本文根据刚塑性最小加速度原理 ,建立了在非对称爆炸冲击载荷作用下自由圆柱壳体的分析模型 ,在不同辅助装药分位角和变形初速条件下 ,用该模型分别计算了相应的壳体最终变形。模拟实验表明 ,实验结果和计算结果比较吻合

双色激光场中极端远紫外超连续谱相干辐射产生

通过脉宽为周期量级的超快强场激光脉冲与惰性气体原子的极端非线性相互作用，能够产生单个的阿秒量级的极端远紫外光脉冲。然而，现有的周期量级的激光脉冲的最短脉宽仍在两个光周期左右，尚不足以支持产生脉宽短于100as的单个极端远紫外脉冲。文章作者首次提出通过在一个周期量级（如6fs）激光脉冲上再叠加一个强度较弱但相对位相精确控制的二倍频激光，能够直接实现单个的65as光脉冲。如进一步经过位相补偿，将有望产生一个脉宽仅为23as的单脉冲，从而将阿秒光脉冲的时间宽度推进到短于一个原子时间单位。

瓦级双包层光纤超荧光光源的实验研究

采用大功率半导体激光器抽运25m掺Yb双包层光纤，在单程装置中，前向(SPF)和后向(SPB)分别获得了1．46w和1．82w最大超荧光功率，斜度效率分别为23．4％0和29．2％，3dB带宽最大为11nm。采用特定范围波长双色镜作为前腔镜，形成双程前向(DPF)装置，获得最大超荧光输出功率2．12W，此时斜度效率为43．2％，中心波长在1070nm，输出光谱平坦性较好，3dB带宽从单程的11nm提高到42nm。

Composition dependent frequency upconversion luminescence in Er3+-doped oxychloride germanate glasses

Er3+ -doped oxychloride germanate glasses have been synthesized by conventional melting and quenching method. Structural and thermal stability properties were obtained based on the Raman spectra and differential thermal analysis, indicating that PbCl2 plays an important role in the formation of glass network and has an important influence on the maximum phonon energy and thermal stability of host glasses. Intense green and red emissions centered at 525, 546, and 657 nm, corresponding to the transitions H-2(11/2) -> I-4(15/2), S-4(3/2) -> I-4(15/2), and F-4(9/2) -> I-4(15/2), respectively, were observed at room temperature. With increasing PbCl2 content, the intensity of green (525 and 546 nm) emissions increases significantly, while the red (657 nm) emission increases slowly. The results indicate that PbCl2 has more influence on the green emissions than the red emission in oxychloride germanate glasses. The possible upconversion luminescence mechanisms has also been estimated and discussed. (c) 2005 Elsevier Ltd. All rights reserved.

大尺寸高浓度掺杂Nd：GGG和Nd：YAG晶体的光谱性质(英文)

由于Nd^3＋离子半径0．112nm和Y^3＋离子半径0．101nm相差10．9％，使得Nd^3＋离子非常难于进入YAG晶体中。我们用温度梯度法生长了大尺寸高浓度（2．8 at％）的Nd：YAG晶体，同时与用提拉法Nd：GGG晶体进行了比较。分析了高浓度掺杂Nd：GGG和Nd：YAG晶体浓度猝灭问题。研究了不同浓度掺杂的猝灭效应。在同样的掺杂浓度下，我们发现它们的猝灭程度不同，其原因是两种晶体中△Emism（-）和（＋） △Emism（＋） 不同。

HfO2 膜料中的杂质对薄膜损伤及性能的影响

By analysis of impurity elements in HfO2 coating material, the influence of main impurity elements on the characteristic of coatings were studied. The results indicate that the metal elements and absorptive dielectric elements damage the HfO2 coatings. The more the Zr element content is, the more the absorption is for the coatings in ultraviolet wave. The negative ion element will become the gas source center and form an ejection in the process of evaporation of coating material, so decrease the damage threshold of the coatings.

Development and growth of hatchery-reared larval Florida pompano (Trachinotus carolinus)

Although the Florida pompano (Trachinotus carolinus) is a prime candidate for aquaculture, the problematic production of juveniles remains a major impediment to commercial culture of this species. In order to improve the understanding of larval development and to refine hatchery production techniques, this study was conducted to characterize development and growth of Florida pompano from hatching through metamorphosis by using digital photography and image analysis. Newly hatched larvae were transparent and had a large, elongate yolk sac and single oil globule. The lower and upper jaws as well as the digestive tract were not fully developed at hatching. Rotifers were observed in the stomach of larvae at three days after hatching (DAH), and Artemia spp. were observed in the stomach of larvae at 14 DAH. Growth rates calculated from total length measurements were 0.22 ±0.04, 0.23 ±0.12, and 0.35 ±0.09 mm/d for each of the larval rearing trials. The mouth gape of larvae was 0.266 ±0.075 mm at first feeding and increased with a growth rate of 0.13 ± 0.04 mm/d. Predicted values for optimal prey sizes ranged from 80 to 130 μm at 3 DAH, 160 to 267 μm at 5 DAH, and 454 to 757 μm at 10 DAH. Based on the findings of this study, a refined feeding regime was developed to provide stage- and size-specific guidelines for feeding Florida pompano larvae reared under hatchery con

Clam farming in the Mekong Delta, Vietnam

The Mekong Delta region in southern Vietnam has high potential for coastal aquaculture, including mollusc culture. Many mollusc species are cultured for domestic and export markets including white clam (Meretrix lyrata Showerby) and blood cockle (Arca granosa). Techniques for clam farming include the nursery and grow-out phases. At present, there are approximately 600 coastal families engaged in clam farming over a total area of 1,870 ha, of which 82.63% is used for the grow-out phased and 17.7% for the nursery phase. Nursery areas are near the coast and receive less than 5 hours of sunlight per day. The average area for a nursery is 3-4 ha and it is fenced with a net or bamboo stakes to prevent clams from escaping and to prevent water currents from carrying them away. Grow-out farm areas are further from the coast and are exposed to sunlight for only 2-3 hours/day. Average farm area for grow-out is 5-6 ha, and may or may not be fenced. Average operating cost is US$1100 per ha for nursery and US$757 per ha for grow-out (the cost of capital assets are not included) with loans being the main source of financial. Problems for clam farmers in the area include natural phenomena, inadequate culture techniques, lack of financing or credit systems, and marketing. Environment-related problems that cause clam mortality include flooding, and freshwater effluent and siltation or sedimentation from Mekong River. Other problems that constrain the development of clam culture in the area are: marketing problems such as lack of buyers and price fluctuations; exploitation of the natural clam populations.