农牧交错区主要植物的氮素利用效率

Berendse&Aerts (1987)认为氮素利用效率(nitrogen use efficiency，NUE)可以分为两部分的乘积，即：①氮素生产力(nitrogen productivity，NP)，②氮素的平均滞留时间(mean residencetime，MRT)。本文利用这一概念对处于我国北方农牧交错带的内蒙古自治区多伦县典型植物的氮素利用策略进行了研究。研究假设：植物在贫瘠生境上所采取的氮素适应策略主要是提高对所吸收氮素的保持能力(较长的MRT)，而不是提高NUE。 在不同土壤生境上，属于不同生活型的不同物种其NP和MRT之间存在负相关关系。在不同生境、生活型和物种之间，作为NP与MRT乘积的NUE比NP、MRT的变化相对要小，结果表明植物主要通过延长MRT来适应氮素贫瘠的生境。因为NP与MRT相反的方向变化，二者不能同时增加或减少，所以NP与MRT之间存在相互协调(trade-off)的关系。 在群落和生态系统水平上，NP与MRT之间也存在相互协调关系，不同水平上的NUE之间也存在一定的联系。除了在种间存在这种关系外，通过对多伦县和十三里滩两种针茅（大针茅、克氏针茅）的氮素利用特征的研究，发现在种内，NP与MRT之间也存在这种相互协调关系。NUE与土壤供氮能力有关，随着土壤供氮能力的下降，NUE呈上升趋势。植物的NUE不仅与土壤的供氮能力有关，其它因素如土壤水分供应状况也会对植物的NUE产生影响，例如，与生长在河岸上的植物相比，生长在河滩湿地上的植物具有较高的NP，但MRT却较低。在群落中，不同植物个体的NUE及其组成参数NP和MRT也存在较大的差异，较大的植株具有较高的NP和MRT，因而NUE也高于个体较小的植株。本文研究结果表明，植物的NUE与氮素回收转移特性密切相关，植物提高氮素回收效率(nitrogen resorption efficiency，NRE)可以延长MRT，从而提高NUE。

Post-processing of vertical-cavity surface-emitting lasers for transverse mode and polarization control

The operation on how high quality single-mode operation can be readily attained on etching circles in multimode devices is discussed. Arrays of such spots can also be envisaged. Control of the polarization state is also achieved by use of deep line etches. The output filaments and beam shapes of the conventional multimode vertical cavity surface emitting lasers (VCSEL) is shown to be engineered in terms of their positions, widths, and polarizations by use of focused ion beam etching (FIBE). Several GaAs quantum well top-emitting devices with cavity diameters of 10 μm and 18 μm were investigated.

Mode control in vertical-cavity surface-emitting lasers by post-processing using focused ion-beaih etching

Single-mode emission is achieved in previously multimode gain-guided vertical-cavity surface-emitting lasers (VCSEL's) by localized modification of the mirror reflectivity using focused ion-beam etching. Reflectivity engineering is also demonstrated to suppress transverse mode emission in an oxide-confined device, reducing the spectral width from 1.2 nm to less than 0.5 nm.

Mode-controlled vertical cavity surface emitting lasers for bandwidth enhancement of multimode fibre links

A GaAs Vertical Cavity Surface Emitting Laser (VCSEL) that generates controlled modes offset from the center is described. The device is modulated with a 27-1 pseudo-random bit sequence and its output is transmitted along a 1 km length of multimode fiber (MMF). Open eyes are obtained for data rates as high as 1.4Gb/s. The transmission bandwidth increases by a factor of 4 over over-filled launch (OFL). This enhancement is stable against environment influences on the fiber.

High bandwidth multimode fiber links using subcarrier multiplexing in vertical-cavity surface-emitting lasers

The usage of subcarrier multiplexing (SCM) techniques to allow link transmission in excess of the specified fiber bandwidth is described. A series of 200-Mbit/s channels with carrier frequencies of up to more than twenty times the 3-dB fiber bandwidth have been successfully used, the maximum being limited by the available electronics. To assess the transmission of the fiber, digitally modulated channels are placed on high frequency carrier signals and then used to modulate a vertical-cavity surface-emitting lasers (VCSEL).

Mechanism of polarization pinning in vertical cavity surface emitting lasers using focused ion beam etching

Photoluminescence experiments have identified strain as the origin for polarization pinning in vertical cavity surface emitting lasers post-processed by focused ion beam etching. Theoretical models were applied to deduce the strain in devices. Post-annealing was used to optimize polarization pinning.

Spatial emission control of vertical cavity surface emitting lasers to provide bandwidth gain in multimode fibre links using a simple alignment technique

Etched VCSEL sources are reported which avoid bandwidth collapse in multimode fibre using a simple coupling technique to control the launch. These devices have allowed better than over-filled launch bandwidth for alignment tolerances of ±7 microns.