Action of ecdysterone on the moulting of amphipod females: Gammarus pulex (L.) and G.fossarum Koch. Early results. [Translation from: Crustaceana 28, 86-88, 1975.]

In studying sexual attraction in gammarids of the group pulex, it has seemed necessary to dissociate the processes of moulting and ovogenesis in order to recognize their respective effects on this phenomenon. For this purpose a synthetic hormone, ecdysterone, was utilized. In the first instance the author followed the action of the hormone on isolated females in vitellogenesis. It was proved that the behaviour of Gammarus pulex and Gammarus fossarum vis-a-vis the ecdysterone used proves to be very close to that of isopods that was observed in Orchestia gammarellus in earlier research. Although they were in vitellogenesis, the females saw their intermoult cycle shortened.

Quantum Mechanics Studies of Fuel Cell Catalysts and Proton Conducting Ceramics with Validation by Experiment

We carried out quantum mechanics (QM) studies aimed at improving the performance of hydrogen fuel cells. This led to predictions of improved materials, some of which were subsequently validated with experiments by our collaborators.

In part I, the challenge was to find a replacement for the Pt cathode that would lead to improved performance for the Oxygen Reduction Reaction (ORR) while remaining stable under operational conditions and decreasing cost. Our design strategy was to find an alloy with composition Pt3M that would lead to surface segregation such that the top layer would be pure Pt, with the second and subsequent layers richer in M. Under operating conditions we expect the surface to have significant O and/or OH chemisorbed on the surface, and hence we searched for M that would remain segregated under these conditions. Using QM we examined surface segregation for 28 Pt₃M alloys, where M is a transition metal. We found that only Pt₃Os and Pt₃Ir showed significant surface segregation when O and OH are chemisorbed on the catalyst surfaces. This result indicates that Pt₃Os and Pt3Ir favor formation of a Pt-skin surface layer structure that would resist the acidic electrolyte corrosion during fuel cell operation environments. We chose to focus on Os because the phase diagram for Pt-Ir indicated that Pt-Ir could not form a homogeneous alloy at lower temperature. To determine the performance for ORR, we used QM to examine all intermediates, reaction pathways, and reaction barriers involved in the processes for which protons from the anode reactions react with O₂ to form H₂O. These QM calculations used our Poisson-Boltzmann implicit solvation model include the effects of the solvent (water with dielectric constant 78 with pH 7 at 298K). We found that the rate determination step (RDS) was the O_ad hydration reaction (O_ad + H₂O_ad -> OH_ad + OH_ad) in both cases, but that the barrier for pure Pt of 0.50 eV is reduced to 0.48 eV for Pt₃Os, which at 80 degrees C would increase the rate by 218%. We collaborated with the Pu-Wei Wu’s group to carry out experiments, where we found that the dealloying process-treated Pt2Os catalyst showed two-fold higher activity at 25 degrees C than pure Pt and that the alloy had 272% improved stability, validating our theoretical predictions.

We also carried out similar QM studies followed by experimental validation for the Os/Pt core-shell catalyst fabricated by the underpotential deposition (UPD) method. The QM results indicated that the RDS for ORR is a compromise between the OOH formation step (0.37 eV for Pt, 0.23 eV for Pt_2ML/Os core-shell) and H₂O formation steps (0.32 eV for Pt, 0.22 eV for Pt_2ML/Os core-shell). We found that Pt_2ML/Os has the highest activity (compared to pure Pt and to the Pt₃Os alloy) because the 0.37 eV barrier decreases to 0.23 eV. To understand what aspects of the core shell structure lead to this improved performance, we considered the effect on ORR of compressing the alloy slab to the dimensions of pure Pt. However this had little effect, with the same RDS barrier 0.37 eV. This shows that the ligand effect (the electronic structure modification resulting from the Os substrate) plays a more important role than the strain effect, and is responsible for the improved activity of the core- shell catalyst. Experimental materials characterization proves the core-shell feature of our catalyst. The electrochemical experiment for Pt_2ML/Os/C showed 3.5 to 5 times better ORR activity at 0.9V (vs. NHE) in 0.1M HClO₄ solution at 25 degrees C as compared to those of commercially available Pt/C. The excellent correlation between experimental half potential and the OH binding energies and RDS barriers validate the feasibility of predicting catalyst activity using QM calculation and a simple Langmuir–Hinshelwood model.

In part II, we used QM calculations to study methane stream reforming on a Ni-alloy catalyst surfaces for solid oxide fuel cell (SOFC) application. SOFC has wide fuel adaptability but the coking and sulfur poisoning will reduce its stability. Experimental results suggested that the Ni4Fe alloy improves both its activity and stability compared to pure Ni. To understand the atomistic origin of this, we carried out QM calculations on surface segregation and found that the most stable configuration for Ni₄Fe has a Fe atom distribution of (0%, 50%, 25%, 25%, 0%) starting at the bottom layer. We calculated that the binding of C atoms on the Ni4Fe surface is 142.9 Kcal/mol, which is about 10 Kcal/mol weaker compared to the pure Ni surface. This weaker C binding energy is expected to make coke formation less favorable, explaining why Ni₄Fe has better coking resistance. This result confirms the experimental observation. The reaction energy barriers for CHx decomposition and C binding on various alloy surface, Ni₄X (X=Fe, Co, Mn, and Mo), showed Ni₄Fe, Ni₄Co, and Fe₄Mn all have better coking resistance than pure Ni, but that only Ni₄Fe and Fe₄Mn have (slightly) improved activity compared to pure Ni.

In part III, we used QM to examine the proton transport in doped perovskite-ceramics. Here we used a 2x2x2 supercell of perovskite with composition Ba₈X₇M₁(OH)₁O₂₃ where X=Ce or Zr and M=Y, Gd, or Dy. Thus in each case a 4⁺ X is replace by a 3⁺ M plus a proton on one O. Here we predicted the barriers for proton diffusion allowing both includes intra-octahedron and inter-octahedra proton transfer. Without any restriction, we only observed the inter-octahedra proton transfer with similar energy barrier as previous computational work but 0.2 eV higher than experimental result for Y doped zirconate. For one restriction in our calculations is that the O_donor-O_acceptor atoms were kept at fixed distances, we found that the barrier difference between cerates/zirconates with various dopants are only 0.02~0.03 eV. To fully address performance one would need to examine proton transfer at grain boundaries, which will require larger scale ReaxFF reactive dynamics for systems with millions of atoms. The QM calculations used here will be used to train the ReaxFF force field.

Chilodonella cyprini (Moroff, 1902) [Translation from: Izv.gos.nauchno-issled.Inst.ozer.i rech.ryb.kh-va 49 25-28, 1959]

The ciliated protozoan Chilodonella cyprini is described. Chilodon parasitizes the body, gills and fins of fishes. The infusoria produce irritation of the integument and strengthened mucous secretion. The sparse knowledsge of the ecology of chilodon is summarised and some advice on the struggle against cholodoniasis in carp given.

Towards a knowledge of chytrids. Part 3. Spirospora paradoxa nov.gen. - nov.spec. [Translation from: Archiv fur Protistenkunde 54 510-528 [pages 522-525 and plate 28 only], 1926]

This partial translation of the original paper provides morphological observations on the fungus Spirospora paradoxa. Illustrations are included here.

A study of T = 2 states in ^(12)B, ^(12)C, ^(20)F and ^(28)Al

The lowest T = 2 states have been identified and studied in the nuclei ¹²C, ¹²B, ²⁰F and and ²⁸Al. The first two of these were produced in the reactions ¹⁴C(p,t)¹²C and ¹⁴C (p,³He)¹²B, at 50.5 and 63.4 MeV incident proton energy respectively, at the Oak Ridge National Laboratory. The T = 2 states in ²⁰F and ²⁸Al were observed in (³He,p) reactions at 12-MeV incident energy, with the Caltech Tandem accelerator.

The results for the four nuclei studied are summarized below:

(1) ¹²C: the lowest T = 2 state was located at an excitation energy of 27595 ± 20 keV, and has a width less than 35 keV.

(2) ¹²B: the lowest T = 2 state was found at an excitation energy of 12710 ± 20 keV. The width was determined to be less than 54 keV and the spin and parity were confirmed to be 0⁺. A second ¹²B state (or doublet) was observed at an excitation energy of 14860 ± 30 keV with a width (if the group corresponds to a single state) of 226 ± 30 keV.

(3) ²⁰F: the lowest T = 2 state was observed at an excitation of 6513 ± 5 keV; the spin and parity were confirmed to be 0⁺. A second state, tentatively identified as T = 2 from the level spacing, was located at 8210 ± 6 keV.

(4) ²⁸Al: the lowest T = 2 state was identified at an excitation of 5997 ± 6 keV; the spin and parity were confirmed to be 0⁺. A second state at an excitation energy of 7491 ± 11 keV is tentatively identified as T = 2, with a corresponding (tentative) spin and parity assignment J^π = 2⁺.

The results of the present work and the other known masses of T = 2 states and nuclei for 8 ≤ A ≤ 28 are summarized, and massequation coefficients have been extracted for these multiplets. These coefficients were compared with those from T = 1 multiplets, and then used to predict the mass and stability of each of the unobserved members of the T = 2 multiplets.

Congreso “Humanizar la educación” : 27, 28, 29 junio 2014

El Congreso "Humanizar la Educación / Hezkuntza Gizatiartu", desarrollado en Bilbao los días 27, 28 y 29 de junio de 2014, es una propuesta dirigida a todos los agentes que constituyen la comunidad educativa. La finalidad de este evento consiste en generar un espacio de dimensión humana para compartir experiencias de trabajo, propiciar vivencias técnicas orientadas al autoconocimiento, y estimular actitudes responsables y creativas que posibiliten humanizar la educación. Está dirigido a todas las personas implicadas y comprometidas con la educación, independientemente del nivel, ámbito y rol en el que ésta se desarrolle; nos referimos a personas receptivas y que confíen en que el cambio comienza en uno mismo. Este marco ofrece una oportunidad para reconocer y hacer visibles realidades educativas ya existentes en esta línea y para nutrir aquellas que pudieran gestarse. Este evento, organizado por la UPV/EHU, se oferta en el marco de los Cursos de Verano / Cursos Europeos de la Fundación Cursos de Verano de la UPV/EHU y cuenta con la colaboración especial de la Fundación Claudio Naranjo. Para su desarrollo, además, cuenta con la ayuda de numerosas entidades, asociaciones, centros y profesionales que tienen la convicción de que educar es mucho más que compartir conocimiento; es una responsabilidad conjunta de todos los que configuramos el mapa educativo.

磷酸盐钕玻璃表面/亚表面损伤特性实验研究

系统地研究了光学研磨过程中,磨料粒径、载荷大小以及机床转速对钕玻璃表面及亚表面损伤的影响。结果表明,机床转速和载荷基本不改变材料表面粗糙度,而较大载荷或较低机床转速产生较大的亚表面缺陷,表面粗糙度和亚表面缺陷缺陷深度基本与最大磨料粒径呈正比,载荷增倍使亚表面缺陷与表面粗糙度的常数比值增加0.05。研究结果为钕玻璃加工工艺改进提供了参考依据。

Estudos dos polimorfismos dos genes da apolipoproteína E (ApoE) e do receptor de LDL (RLDL - A370T) em indivíduos jovens pertencentes ao estudo do Rio de Janeiro em seguimento de 28 Anos

Estudos demonstram a associação de alterações da apolipoproteína E (ApoE) e do receptor do LDL (RLDL) com a ocorrência de doenças cardiovasculares e dislipidemia. O objetivo principal deste trabalho foi investigar a associação entre genótipos diferenciais da ApoE e do RLDL com a persistência de alterações de variáveis lipídicas em indivíduos jovens acompanhados há 28 anos no Estudo do Rio de Janeiro (ERJ). Através de um estudo longitudinal, tipo coorte, investigou-se 56 indivíduos (35M) em três avaliações. Em A1 (13.301.53 anos), A2 (22.091.91 anos) e A3 (31.231.99). Nas três ocasiões foi realizada avaliação clínica. Em A2 e A3 foram dosados colesterol total, HDL, LDL e triglicerídeos. Em A3 acrescentou-se o estudo dos polimorfismos genéticos da ApoE e do RLDL. Os fragmentos de interesse neste estudo foram amplificados por PCR (polymerase chain reaction) e os genótipos foram identificados através de reações de restrição. As frequências genotípicas de ApoE foram ε3/ε3 (62,5%), ε3/ε4 (25%), ε2/ε3 (5,4%) ,ε2/ε4 (5,4%) e ε4/ε4 (1,8%) e para os genótipos de RLDL foram AA (85,7%), AT (12,5%) e TT (1,8%). O genótipo ε2/ε2 não foi observado. A análise da distribuição dos genótipos de ApoE segundo a permanência de dislipidemia mostrou que todos os indivíduos com genótipo de ApoE dos tipos ε2/ε4 e ε4/ε4 mantiveram pelo menos um lípide alterado em A2 e A3 entretanto, todos os indivíduos com genótipo de ApoE do tipo ε2/ε3 não apresentaram lípides alterados em A2 e A3. Para o genótipo do RLDL não houve diferença significativa. Quando analisadas isoladamente, não foi identificado nenhum resultado significativo em A2 e/ou A3 associado a estes genótipos. O polimorfismo do gene da ApoE esteve associado à permanência de dislipidemia em indivíduos jovens acompanhados em estudo de seguimento longitudinal

Campagnes Nizery: Togo 3 (16 au 18/08/83) et Togo 4 (28 au 30/11/83). Resultats des chalutages

This publication gives the results of the bottom trawlings made during the cruises Togo 3 and logo 4 by the oceanographic research vessel "Andre NIZERY" on the continental shelf of Togo during the estimation program of halieutic resources. The report includes: 1 - The report of the cruises Togo 3 and Togo 4 2 - Some information on the presentation of the results 3 - The trawl recording cards for the 2 cruises 4 - The length frequency distributions of the measured samples.

Campagnes Nizery: Togo 5 (01 to 03/03/84) and Togo 6 (26 to 28/03/84). Resultats des chalutages

This publication gives the results of the bottom trawlings made during the cruises Togo 5 and Togo 6 by the oceanographic research vessel "Andre Nizery" on the continental shelf of Togo during the estimation program of halieutic resources. The report includes: 1 - the report of the cruises Togo 5 and Togo 6; 2 - Some information on the presentation of the results; 3 - the trawl recording maps for the 2 cruises; 4 - The length frequency distributions of the measured samples.