Childhood sexual abuse and adolescent eating disorder : findings from the Victorian Adolescent Health Cohort study

Objective: To examine the relationship between childhood sexual abuse (CSA) before the age of 16 years and later onset of bulimia and anorexia nervosa symptoms in females.

Design: A longitudinal cohort study of adolescents observed from August 1992 to March 2003. The cohort was defined in a 2-stage cluster sample using 44 Australian schools in Victoria.

Setting: Population based.

Participants: A total of 1936 persons participated at least once and survived to the age of 24 years, including 999 females. The mean (SD) age of females at the start of follow- up was 14.91 (0.39) years; and at completion, 24.03 (0.55) years.

Main Exposure: Self-reported CSA before the age of 16 years was ascertained retrospectively at the age of 24 years.

Outcome Measures: Incident Diagnostic and Statistical Manual of Mental Disorders (Fourth Edition)–defined partial syndromes of anorexia and bulimia nervosa were identified between waves 4 (mean age, 16.3 years) and 6 (mean age, 17.4 years) using the Branched Eating Disorder Test.

Results: The incidence of bulimic syndrome during adolescence was 2.5 (95% confidence interval, 0.80-8.0) times higher among those who reported 1 episode of CSA and 4.9 (95% confidence interval, 1.9-12.7) times higher among those who reported 2 or more episodes of CSA, compared with females reporting no episodes, adjusted for age and background factors. The association persisted after adjusting for possible confounders or mediators measured 6 months earlier, including psychiatric morbidity and dieting behavior. There was little evidence of an association between CSA and partial syndromes of incident anorexia nervosa.

Conclusion: Childhood sexual abuse seems to be a risk factor for the development of bulimic syndromes, not necessarily mediated by psychiatric morbidity or severe dieting.

Integrated modelling of cost-effective siting and operation of flow-control infrastructure for river ecosystem conservation

Wetland and floodplain ecosystems along many regulated rivers are highly stressed, primarily due to a lack of environmental flows of appropriate magnitude, frequency, duration, and timing to support ecological functions. In the absence of increased environmental flows, the ecological health of river ecosystems can be enhanced by the operation of existing and new flow-control infrastructure (weirs and regulators) to return more natural environmental flow regimes to specific areas. However, determining the optimal investment and operation strategies over time is a complex task due to several factors including the multiple environmental values attached to wetlands, spatial and temporal heterogeneity and dependencies, nonlinearity, and time-dependent decisions. This makes for a very large number of decision variables over a long planning horizon. The focus of this paper is the development of a nonlinear integer programming model that accommodates these complexities. The mathematical objective aims to return the natural flow regime of key components of river ecosystems in terms of flood timing, flood duration, and interflood period. We applied a 2-stage recursive heuristic using tabu search to solve the model and tested it on the entire South Australian River Murray floodplain. We conclude that modern meta-heuristics can be used to solve the very complex nonlinear problems with spatial and temporal dependencies typical of environmental flow allocation in regulated river ecosystems. The model has been used to inform the investment in, and operation of, flow-control infrastructure in the South Australian River Murray.

Neighborhood disadvantage, individual-level socioeconomic position, and self-reported chronic arthritis : a cross-sectional multilevel study

Objective To examine the association between individual- and neighborhood-level disadvantage and self-reported arthritis.

Methods We used data from a population-based cross-sectional study conducted in 2007 among 10,757 men and women ages 40–65 years, selected from 200 neighborhoods in Brisbane, Queensland, Australia using a stratified 2-stage cluster design. Data were collected using a mail survey (68.5% response). Neighborhood disadvantage was measured using a census-based composite index, and individual disadvantage was measured using self-reported education, household income, and occupation. Arthritis was indicated by self-report. Data were analyzed using multilevel modeling.

Results The overall rate of self-reported arthritis was 23% (95% confidence interval [95% CI] 22–24). After adjustment for sociodemographic factors, arthritis prevalence was greatest for women (odds ratio [OR] 1.5, 95% CI 1.4–1.7) and in those ages 60–65 years (OR 4.4, 95% CI 3.7–5.2), those with a diploma/associate diploma (OR 1.3, 95% CI 1.1–1.6), those who were permanently unable to work (OR 4.0, 95% CI 3.1–5.3), and those with a household income <$25,999 (OR 2.1, 95% CI 1.7–2.6). Independent of individual-level factors, residents of the most disadvantaged neighborhoods were 42% (OR 1.4, 95% CI 1.2–1.7) more likely than those in the least disadvantaged neighborhoods to self-report arthritis. Cross-level interactions between neighborhood disadvantage and education, occupation, and household income were not significant.

Conclusion Arthritis prevalence is greater in more socially disadvantaged neighborhoods. These are the first multilevel data to examine the relationship between individual- and neighborhood-level disadvantage upon arthritis and have important implications for policy, health promotion, and other intervention strategies designed to reduce the rates of arthritis, indicating that intervention efforts may need to focus on both people and places.

Design and analysis of efficient rectifiers for wireless power harvesting in DBS devices

This paper presents an analysis of optimum rectifier circuits for wireless energy harvesting in deep brain stimulation (DBS) devices. Since DBS demands compact and low power consumption devices, small, high conversion efficient, and high output voltage rectifiers need to be developed. The investigation that is presented in this paper is analytical and simulated based. Analysis on a variety of circuit configurations brings more evidence to improve the performance of rectifiers. Analytical parameters influencing the output DC voltage and the efficiency of the rectifiers are described. The operating frequency of the 915 MHz industrial, scientific and medical (ISM) radio band is used in this study. The maximum conversion efficiency of the LC matched half wave rectifier, the Greinacher voltage doubler, the Delon doubler, and the 2-stage voltage multiplier is obtained as 56.34%, 74.45%, 71.48%, and 31.44%, respectively, at the 30 dBm input power level. The corresponding maximum output DC voltages are 6.27 V, 16.83 V, 13.36 V, and 9.20 V. Thus the Greinacher voltage doubler is deemed as the best configuration according to the conversion efficiency and the output voltage measurements.

Machinability and phase transformation study of nanobainite steels

There is an increasing demand for high strength materials with the development of technology and critical applications. Nano materials are newly developed materials with extremely high strength for this purpose. Nanobainite is a dual phase material containing alternate layers of bainitic ferrite in nano dimensions and retained austenite. Nanobainite is produced by isothermally holding austenitized steel at a temperature of 200°C or less, depending on the chemical composition, for 6 10 days until bainite forms and then cooling to room temperature using austempering. The experimental design consisted of face milling under 12 combinations of Depth of Cut (DOC)-1, 2 and 3mm; cutting speed-100 and 150m/min; constant feed-0.15mm/rev and coolant on/off. The machinability of the material is assessed by means of analysis, such as surface texture and microhardness. The assessment also involves microstructural comparisons before and after milling. Future work involves quantifying the microstructural phase before and after milling using XRD. The results obtained are used to assess the most favorable condition to cut this new variety of steel.

A preliminary study on machinability assessment of nanobainite steel

The demand for high strength materials and improvements in heat treatment techniques has given rise to this new form of high strength steel known as nanobainite steel. The production of nanobainite steel involves slow isothermal holding of austenitic steel around 200oC for 10 days, in order to obtain a carbon enriched austenite and cooling to room temperature using austempering. The microstructure of nanobainite steel is dual phase consisting of alternate layers of bainitic ferrite and austenite. The experimental design consists of face milling under 12 combination of Depth of Cut (DoC)-1, 2 and 3mm; cutting speed-100 and 150m/min; constant feed- 0.15mm/rev and coolant on/off. The machinability of the material is assessed by means of analysis such as metallography and cutting force analysis. The results obtained are used to assess the most favorable condition to machine this new variety of steel. Future work involves study on phase transformation by quantifying the microstructural phase before and after milling using XRD.

RF rectifiers for EM power harvesting in a deep brain stimulating device

A passive deep brain stimulation (DBS) device can be equipped with a rectenna, consisting of an antenna and a rectifier, to harvest energy from electromagnetic fields for its operation. This paper presents optimization of radio frequency rectifier circuits for wireless energy harvesting in a passive head-mountable DBS device. The aim is to achieve a compact size, high conversion efficiency, and high output voltage rectifier. Four different rectifiers based on the Delon doubler, Greinacher voltage tripler, Delon voltage quadrupler, and 2-stage charge pumped architectures are designed, simulated, fabricated, and evaluated. The design and simulation are conducted using Agilent Genesys at operating frequency of 915 MHz. A dielectric substrate of FR-4 with thickness of 1.6 mm, and surface mount devices (SMD) components are used to fabricate the designed rectifiers. The performance of the fabricated rectifiers is evaluated using a 915 MHz radio frequency (RF) energy source. The maximum measured conversion efficiency of the Delon doubler, Greinacher tripler, Delon quadrupler, and 2-stage charge pumped rectifiers are 78, 75, 73, and 76 % at -5 dBm input power and for load resistances of 5-15 kΩ. The conversion efficiency of the rectifiers decreases significantly with the increase in the input power level. The Delon doubler rectifier provides the highest efficiency at both -5 and 5 dBm input power levels, whereas the Delon quadrupler rectifier gives the lowest efficiency for the same inputs. By considering both efficiency and DC output voltage, the charge pump rectifier outperforms the other three rectifiers. Accordingly, the optimised 2-stage charge pumped rectifier is used together with an antenna to harvest energy in our DBS device.

A learning method for Top-N recommendations with incomplete data

In this paper, we tackle the incompleteness of user rating history in the context of collaborative filtering for Top-N recommendations. Previous research ignore a fact that two rating patterns exist in the user × item rating matrix and influence each other. More importantly, their interactive influence characterizes the development of each other, which can consequently be exploited to improve the modelling of rating patterns, especially when the user × item rating matrix is highly incomplete due to the well-known data sparsity issue. This paper proposes a Rating Pattern Subspace to iteratively re-optimize the missing values in each user’s rating history by modelling both the global and the personal rating patterns simultaneously. The basic idea is to project the user × item rating matrix on a low-rank subspace to capture the global rating patterns. Then, the projection of each individual user on the subspace is further optimized according to his/her own rating history and the captured global rating patterns. Finally, the optimized user projections are used to improve the modelling of the global rating patterns. Based on this subspace, we propose a RapSVD-L algorithm for Top-N recommendations. In the experiments, the performance of the proposed method is compared with the state-of-the-art Top-N recommendation methods on two real datasets under various data sparsity levels. The experimental results show that RapSVD-L outperforms the compared algorithms not only on the all items recommendations but also on the long tail item recommendations in terms of accuracy.

Effect of intermittent feeding on growth in early juveniles of the crayfish Cherax quadricarinatus

Three experiments were conducted with juveniles of the crayfish Cherax quadricarinatus to investigate the effect of intermittent feeding regimes on growth and the ability to tolerate the shortage of food. In experiment 1, stage III juveniles were assigned to one of seven intermittent feeding groups (from FS1: 1 day fed/1 day non-fed to FS7: 7 days fed/7 days non-fed) and two control groups, continuously fed (CF) and continuously starved (CS) animals; this experiment comprised a short-term intermittent feeding period until the first molt, followed by a continuous feeding period. In the experiment 2, stage III juveniles were assigned to one of three intermittent feeding groups (FS2 to FS4) and one control group (CF); it consisted of a prolonged intermittent feeding period, until the end of the experiment In the experiment 3, stage VI and VII juveniles were assigned to one of three intermittent feeding groups (FS2 to FS4) and one control (CF); it also consisted of a prolonged intermittent feeding period. The red claw crayfish juveniles were able to tolerate periods of intermittent feeding and underwent compensatory growth after continuous feed was re-established. The ability of crayfish to tolerate intermittent feeding was influenced by developmental stage and duration of the intermittent feeding period. Stage III juveniles survived, but decreased growth, when subjected to prolonged intermittent feeding. However, they showed full compensatory growth when the intermittent feeding period was short and followed by continuous feeding. on the other hand, stage VI-VII tolerated 60 days of prolonged intermittent feeding without any change in growth and survival. The hepatosomatic index (based on wet weight) values of the treatments and the control were similar, suggesting that intermittent feeding may not be considered a nutritional stress condition. The relative pleon weight (based on wet weight) values of the treatments and control were similar suggesting low use of nutrients from the muscle to increase the chance for survival. The juveniles of C quadricarinatus can tolerate relatively long periods of low food availability and this is an important adaptation for their survival in changing/unpredictable environments and an attribute favorable for the production of the species. (C) 2011 Elsevier B.V. All rights reserved.

Clinical Viability for Immediate Loading of Dental Implants: Part II-Treatment Alternatives

The treatment with implants aims to obtain a direct interface between bone and implant. The implant is kept load-free during 4 to 6 months in the 2-stage procedure, which is considered a requisite for osseointegration. However, this period is based on empirical principles and uncomfortable for patient. So, the immediate loading protocol was Suggested to submit implants to occlusal function after placement. This protocol has been applied for several conditions of edentulism. The aim of this study was to evaluate the treatment alternatives for immediate loading of complete and partial edentulous patients. In general, the studies have demonstrated high previsibility for rehabilitation of complete edentulous arches with full-arch, implant-supported prosthesis. The rehabilitation with immediate loading for maxillary overdenture is questionable because there is no longitudinal study in literature. The studies with partial edentulous arches have demonstrated high success rates for implants placed in the mandibular and maxillary anterior region. Additional care is recommended for posterior region mainly in the maxillary arch, and further studies are suggested to corroborate this treatment.

CELL-MEDIATED AND HUMORAL IMMUNE-RESPONSES IN IMMUNIZED AND OR DERMATOBIA-HOMINIS INFESTED RABBITS

The cell-mediated and humoral immune response of rabbits to antigens from larvae of Dermatobia hominis were analyzed by leucocyte migration inhibition factor assay (MIF), immunodiffusion (ID) and passive hemagglutination (PH) test in rabbits immunized with D. hominis extract, in rabbits immunized and infested with the parasite and rabbits infested with D. hominis. Twenty rabbits were divided into five groups: Group 1, rabbits immunized with a crude antigen extract, evaluated for 40 weeks at 4 week intervals; Group 2, rabbits immunized and infested with newly hatched larvae at 14 weeks post immunization (PI) and evaluated as Group 1; Group 3, rabbits immunized, evaluated for 28 weeks at 2 week intervals; Group 4, rabbits immunized and infested at 4 weeks PI and evaluated as Group 3; Group 5, rabbits infested and evaluated for 24 weeks at 2 week intervals. Different patterns of reactivity were observed in the infested and immunized animals: immunized rabbits developed antibodies and cellular immune responses earlier and at higher levels during immunization than the infested rabbits; the infestation at 14 weeks PI, when the cell-mediated and humoral immune response began to decrease, or at 4 weeks PI when these parameters were at higher levels, elicited an anamnestic response. After the spontaneous elimination of larvae by the host, from the 4th week PI onwards, high titers of antibodies and migration inhibition indices were maintained for a long period. These results suggest that the onset of cellular and humoral immune responses after immunization may be important as a biological control of myiasis and contribute to better understanding of the immune defense mechanism of the host against D. hominis.

A linear optimization approach to the combined production planning model

Two fundamental processes usually arise in the production planning of many industries. The first one consists of deciding how many final products of each type have to be produced in each period of a planning horizon, the well-known lot sizing problem. The other process consists of cutting raw materials in stock in order to produce smaller parts used in the assembly of final products, the well-studied cutting stock problem. In this paper the decision variables of these two problems are dependent of each other in order to obtain a global optimum solution. Setups that are typically present in lot sizing problems are relaxed together with integer frequencies of cutting patterns in the cutting problem. Therefore, a large scale linear optimizations problem arises, which is exactly solved by a column generated technique. It is worth noting that this new combined problem still takes the trade-off between storage costs (for final products and the parts) and trim losses (in the cutting process). We present some sets of computational tests, analyzed over three different scenarios. These results show that, by combining the problems and using an exact method, it is possible to obtain significant gains when compared to the usual industrial practice, which solve them in sequence. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Laryngeal electromyography in movement disorders: Preliminary data

This study describes preliminary laryngeal electromyography (LEMG) data and botulinum toxin treatment in patients with dysphonia due to movement disorders. Twenty-five patients who had been clinically selected for botulinum toxin administration were examined, 19 with suspected laryngeal dystonia or spasmodic dysphonia (SD), 5 with vocal tremor, and 1 with Gilles de la Tourette syndrome (GTS). LEMG evaluations were performed before botulinum toxin administration using monopolar electrodes. Electromyography was consistent with dystonia in 14 patients and normal in 5, and differences in frequency suggesting essential tremor in 3 and Parkinson tremors in 2. The different LEMG patterns and significant improvement in our patients from botulinum toxin therapy has led us to perform laryngeal electromyography as a routine in UNICAMP movement disorders ambulatory.

Estudo experimental do escoamento sobre placas planas munidas de protuberâncias quadradas e onduladas

Pós-graduação em Engenharia Mecânica - FEIS

Uso de álcool e julgamento sócio-moral de estudantes do ensino médio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)