南海北部珠江口近海地质风险

南海是我国海洋灾害地质条件最为复杂、潜在地质灾害危险性最大的海区。南海北部尤其是珠江口地区的地理位置尤为重要，是我国经济开发的门户地区。本文使用GeoSwath Plus多波束系统对南海北部珠江口外海面进行了水深测量，通过系统配套软件对多波束数据的精细处理，得出高密度的水深数据以及旁扫声纳数据，经过对数据以及相关成图图件的分析，利用对灾害地貌的加权统计模型对该地区的地质灾害进行定量评定。目前国内使用的多波束型号较多，根据其频率的不同可分为浅水、中水、深水多波束系统。根据波束形成原理（数控法和相干法）的不同可分为传统多波束和具有相干特点的多波束系统，这两种多波束系统由于其原理的差异，在各种性能表现上都存在不同之处，本文从原理及其各种不同的性能表现上对该多波束系统与传统多波束系统进行了详细对比论证。 在对调查区区域地质、第四纪地质充分调研的基础上，通过对调查区地形的概况和相关影响因素的论述（诸如水动力条件、构造特征等），结合水深图、地形图和多条地形剖面的分析，得出该海域在工程施工方面海底地形上的影响因素。 通过对本区所发现的地貌类型，结合海洋地质灾害类型分析，通过对相关地质灾害类型的统计说明，得出该地区地质灾害的影响因素及其潜在危害程度。通过提取南海北部的灾害地质因素和对调查区灾害地质环境的充分研究，以灾害地质因素为评价因子，采用加权统计模型对研究区的海底稳定性进行分区定量评价。利用评价结果，确定了调查区基于地貌类型区划的海底稳定性级别。

Fast microzooplankton grazing on fast-growing, low-biomass phytoplankton: a case study in spring in Chesapeake Bay, Delaware Inland Bays and Delaware Bay

Dilution experiments were performed to examine the growth and grazing mortality rates of picophytoplankton (< 2 mu m), nanophytoplankton (2-20 mu m), and microphytoplankton (> 20 mu m) at stations in the Chesapeake Bay (CB), the Delaware Inland Bays (DIB) and the Delaware Bay (DB), in early spring 2005. At station CB microphytoplankton, including chain-forming diatoms were dominant, and the microzooplankton assemblage was mainly composed of the tintinnid Tintinnopsis beroidea. At station DIB, the dominant species were microphytoplanktonic dinoflagellates, while the microzooplankton community was mainly composed of copepod nauplii and the oligotrich ciliate Strombidium sp. At station DB, nanophytoplankton were dominant components, and Strombidium and Tintinnopsis beroidea were the co-dominant microzooplankton. The growth rate and grazing mortality rate were 0.13-3.43 and 0.09-1.92 d(-1) for the different size fractionated phytoplankton. The microzooplankton ingested 73, 171, and 49% of standing stocks, and 95, 70, and 48% of potential primary productivity for total phytoplankton at station CB, DIB, and DB respectively. The carbon flux for total phytoplankton consumed by microzooplankton was 1224.11, 100.76, and 85.85 mu g C 1(-1) d(-1) at station CB, DIB, and DB, respectively. According to the grazing mortality rate, carbon consumption rate and carbon flux turn over rates, microzooplankton in study area mostly preferred to graze on picophytoplankton, which was faster growing but was lowest biomass component of the phytoplankton. The faster grazing on Fast-Growing-Low-Biomass (FGLB) phenomenon in coastal regions is explained as a resource partitioning strategy. This quite likely argues that although microzooplankton grazes strongly on phytoplankton in these regions, these microzooplankton grazers are passive.

Aega sheni, a new species of Aegidae (Crustacea : Isopoda : Cymothoida) from southern China and Australia

Aega sheni sp. nov. from Chinese and Australian waters, is described and figured. This species is characterized by the plate-like expansion of antennule peduncle articles 1 and 2, very large eyes (nearly making contact), numerous robust setae on the inferior margins of the ischium of pereopods 2 and 3, large distal lobe on the propodus of pereopods 1-3, shape and setation of the uropods, and the rounded pleotelson posterior margin. Aega sheni has been recorded at depths of 300-435 metres.

Antibacterial bromophenols from the marine red alga Rhodomela confervoides

Two bromophenols, together with three known compounds, were isolated from the methanolic extract of the marine alga, Rhodomela confervoides. By means of MS and NMR spectroscopic analyses, they were identified as 3-bromo-4-[2,3-dibromo-4,5-dihydroxyphenyl] methyl-5-(hydroxymethyl) 1,2-benzenediol (1) and 3-bromo-4-[2,3-dibromo-4,5-dihydroxyphenyl] methyl-5- (ethoxymethyl) 1,2-benzenediol (2). Three known compounds were also isolated, namely 3-bromo-4-[2,3-dibromo-4,5-dihydroxyphenyl] methyl-5-(methoxymethyl) 1,2-benzenediol (3), 4,4'- methylenebis [5,6-dibromo-1,2-benzenediol] (4) and bis (2,3-dibromo-4,5-dihydroxybenzyl) ether (5). Compound 5 was the most active against five strains of bacteria with the MIC less than 70 mug/ml, while compounds 2, 3 and 4 exhibited moderate activity.

Summer diet of two sympatric species of raptors Upland Buzzard (Buteo hemilasius) and Eurasian Eagle Owl (Bubo bubo) in alpine meadow: problem of coexistence

Summer diets of two sympatric raptors Upland Buzzards (Buteo hemilasius Temminck et Schlegel) and Eurasian Eagle Owls (Bubo bubo L. subsp. Hemachalana Hume) were studied in an alpine meadow (3250 m a.s.l.) on Qinghai-Tibet Plateau, China. Root voles Microtus oeconomus Pallas, plateau pikas Ochotona curzoniae Hodgson, Gansu pikas O. cansus Lyon and plateau zokors Myospalax baileyi Thomas were the main diet components of Upland Buzzards as identified through the pellets analysis with the frequency of 57, 20, 19 and 4%, respectively. The four rodent species also were the main diet components of Eurasian Eagle Owls basing on the pellets and prey leftovers analysis with the frequency of 53, 26, 13 and 5%, respectively. The food niche breadth indexes of Upland Buzzards and Eurasian Eagle Owls were 1.60 and 1.77 respectively (higher value of the index means the food niche of the raptor is broader), and the diet overlap index of the two raptors was larger (C-ue = 0.90) (the index range from 0 - no overlap - to I - complete overlap). It means that the diets of Upland Buzzards and Eurasian Eagle Owls were similar (Two Related Samples Test, Z = -0.752, P = 0.452). The classical resource partitioning theory can not explain the coexistence of Upland Buzzards and Eurasian Eagle Owls in alpine meadows of Qinghai-Tibet Plateau. However, differences in body size, predation mode and activity rhythm between Upland Buzzards and Eurasian Eagle Owls may explain the coexistence of these two sympatric raptors.

西天山造山带古生代构造演化与地壳增生—来自花岗岩和蛇绿岩的证据

The Central Asian Orogen Belt (CAOB), which is different from the subductional orogen and the collisional orogen, is known as the most important site of crustal growth in the Phanerozoic, and it has been a ‘hot spot’ for studying the orogenic belts. The Chinese West Tianshan Orogen is occupying the west-southern part of the CAOB and is of great importances to understand the orogenic processes and the continental growth in the Central Asia. The West Tianshan Orogen had undergone complex tectonic evolutional processes in Paleozoic times and large volumes granitic rocks have recorded important information about these processes. Litter is known about Phanerozoic continental growth in the Western Tianshan area so far, compared with the other areas of the CAOB, such as eastern Junggar, western Junggar, Altai and Alakol. The aim of this dissertation is to set up the chronology frame of granitoids in western Tianshan, provide new evidence for the tectonic evolution and discuss the Paleozoic continental growth in this area, on the basis of the studies on the isotopic chronology, major element, trace element and Nd-Sr isotopic geochemistry of granitoids and the isotopic chronology and geochemistry of the ophiolites in this area, especially the Kule Lake ophiolites. 25 precise SHRIMP U-Pb zircon and LA-ICPMS U-Pb zircon ages have been obtained in this dissertation. The granitic rocks in western Tianshan had been formed during two periods: the granitic gneiss with an age of 896Ma, possibly representing the forming age of the Precambrian basement; the granitic rocks with ages varying from 479Ma to 247Ma, recording the Paleozoic orogenic process of western Tianshan. The granitoids in western Tianshan are composed of intermediate-basic rocks, intermediate rocks, intermediate-acid rocks and acid rocks, mainly intermediate-acid rocks and acid rocks. They are mostly granite, granodiorite, quartz syenite and monzodiorite. Different types of granitic rocks are exposed in different tectonic units. The granitoids on the northern margin of the Yili Plate mainly formed in late Paleozoic (413Ma ~ 281Ma), those with ages varying from 413Ma to 297Ma show continental arc affinities and the magnesian calc-alkalic metaluminous diorite of 281Ma display the geochemical characteristics similar to those of granites formed during the post-orogenic period. The granitiods on the southern margin of the Yili Plate include the adakite diorite of 470Ma which was formd by partial melting of thickened lower crust, the post-collisional alkali-feldspar granite of 430Ma, the volcanic arc granite of 348Ma and the Triassic post-collisional granite. The granitoids in the Central Tianshan Plate formed in 479Ma ~ 247Ma, mainly in 433Ma ~ 321Ma. The granitic rocks with ages of 479Ma ~ 321Ma are magnesian calc-alkalic to alkalic rocks with continental arc affinities. A few post-collisional granitoids of 276Ma ~ 247Ma may have inherited the geochemical characteristics of pre-existing arc magma. The granitic rocks in Southern Tianshan (northern margin of the Tarim plate) formed two stages, 420Ma ~ 411Ma and ca. 285Ma. The magnesian calcic to alkalic granites of 420Ma ~ 411Ma may formed during the extension process of the continental margin. The granite of 285Ma includes mostly ferroan calc-alkalic to alkali-calcic rocks with high SiO2 and high alkaline contents, and obviously negative anomaly of Eu, Ba, Sr, P, Ti, similar to the geochemical characteristics of the A-type granite which is formed during post-collisional extension. The Kule Lake ophiolite in southern Tianshan shows the affinity of N-MORB. A SHRIMP zircon U-Pb age of 425±8Ma has obtained for gabbros. Some zircons have given another group of 206Pb/238U age 918Ma, which may indicate the information of the pre-exist old basement rock. The small oceanic basin represented by Kule Lake ophiolite probably developed on the split northern margin of Tarim block. A model for Paleozoic tectonic evolution of the West Tianshan Orogen has been proposed here on the basis of the new results obtained in this dissertation and the previous published data. In Early Cambrian, the Terskey Ocean occurred along the North Nalati fault (NNF), and it separated the Yili plate from the Central Tianshan plate which was probably connected with the Tarim plate. The Terskey Ocean probably subducted towards south under the Central Tianshan plate and towards north under the Yili plate simultaneously. In the early stage of Late Ordovician, the Terskey Ocean had been closed, and the Yili and Central Tianshan plates collided. Meanwhile, extension happened within the joint Central Tianshan and Tarim plates gradually and the Paleo-South Tianshan Ocean had been formed. In Early Silurian, the Paleo-South Tianshan Ocean began to subduct beneath the composite Yili-Central Tianshan plate, which was intruded by volcanic arc granitoids. In Middle Silurian, the Paleo-South Tianshan Ocean, which had reached a certain width, was subducting strongly. And this subduction may have produced voluminous granitoids in the Central Tianshan plate. In the latest stage of Carboniferous, the Paleo-South Tianshan ocean closed, and the Yili-Central Tianshan plate and Tarim plate collided. In Late Cambrian, Paleo-Junggar Ocean occurred to north of the Yili plate; and started to subduct towards south under the Yili plate in Ordovician. This subduction may have produced a magma arc on the northern margin of the Yili plate. In Late Carboniferous, the Paleo-Junggar Ocean had been closed. The Yili-Central and Junggar plates amalgamated together. The West Tianhan Orogen may undergo a post-collisional collapse since Permian. And the magmatic activities may continue to early Triassic. The initial 87Sr/86Sr ration of the granitic rocks in the western Tianshan Mountains varies from 0.703226 to 0.716343, and Nd（t）from -6.50 to 2.03. The characteristics of Sr-Nd isotope indicate that the source of granitic material is not a sole source, which may be produced by mantle-crust magma mixing. In Paleozoic time, lateral growth of the continental crust along active continental margins was dominant, whereas the vertical growth of continental crust resulted from post- collisional mantle derived magmas was not obvious.

Tripartite structure in Manawydan Uab Llyr

null RAE2008

Practice links [Issue 51, February 2013]

Practice Links is a free e-publication for practitioners working in Irish social services, voluntary and nongovernmental sectors. Practice Links was created to enable practitioners to keep up-to-date with new publications, electronic resources and conference opportunities. Issue 51 contains advice for social workers regarding the use of social media. It also contains reviews on Cognitive-­‐behavioral interventions for children who have been sexually abused and Psycho-social interventions for reducing anti-psychotic medication in care home residents.

Effectiveness of rescue antiretroviral therapy including intravenously administered zidovudine and foscarnet in a child with HIV-1 enteropathy.

Case Reports

Development of universal antidotes to control aptamer activity.

With an ever increasing number of people taking numerous medications, the need to safely administer drugs and limit unintended side effects has never been greater. Antidote control remains the most direct means to counteract acute side effects of drugs, but, unfortunately, it has been challenging and cost prohibitive to generate antidotes for most therapeutic agents. Here we describe the development of a set of antidote molecules that are capable of counteracting the effects of an entire class of therapeutic agents based upon aptamers. These universal antidotes exploit the fact that, when systemically administered, aptamers are the only free extracellular oligonucleotides found in circulation. We show that protein- and polymer-based molecules that capture oligonucleotides can reverse the activity of several aptamers in vitro and counteract aptamer activity in vivo. The availability of universal antidotes to control the activity of any aptamer suggests that aptamers may be a particularly safe class of therapeutics.

Numerical simulation of encapsulant curing within a variable frequency microwave processing system

Curing of encapsulant material in a simplified microelectronics package using an open oven Variable Frequency Microwave (VFM) system is numerically simulated using a coupled solver approach. A numerical framework capable of simulating electromagnetic field distribution within the oven system, plus heat transfer, cure rate, degree of cure and thermally induced stresses within the encapsulant material is presented. The discrete physical processes have been integrated into a fully coupled solution, enabling usefully accurate results to be generated. Numerical results showing the heating and curing of the encapsulant material have been obtained and are presented in this contribution. The requirement to capture inter-process coupling and the variation in dielectric and thermophysical material properties is discussed and illustrated with simulation results.

Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications

The market for solder paste materials in the electronic manufacturing and assembly sector is very large and consists of material and equipment suppliers and end users. These materials are used to bond electronic components (such as flip-chip, CSP and BGA) to printed circuit boards (PCB's) across a range of dimensions where the solder interconnects can be in the order of 0.05mm to 5mm in size. The non-Newtonian flow properties exhibited by solder pastes during its manufacture and printing/deposition phases have been of practical concern to surface mount engineers and researchers for many years. The printing of paste materials through very small-sized stencil apertures is known to lead to increased stencil clogging and incomplete transfer of paste to the substrate pads. At these very narrow aperture sizes the paste rheology and particle-wall interactions become crucial for consistent paste withdrawal. These non-Newtonian effects must be understood so that the new paste formulations can be optimised for consistent printing. The focus of the study reported in this paper is the characterisation of the rheological properties of solder pastes and flux mediums, and the evaluation of the effect of these properties on the pastes' printing performance at the flip-chip assembly application level. Solder pastes are known to exhibit a thixotropic behaviour, which is recognised by the decrease in apparent viscosity of paste material with time when subjected to a constant shear rate. The proper characterisation of this time-dependent theological behaviour of solder pastes is crucial for establishing the relationships between the pastes' structure and flow behaviour; and for correlating the physical parameters with paste printing performance. In this paper, we present a number of methods which have been developed for characterising the time-dependent and non-Newtonian rheological behaviour of solder pastes and flux mediums as a function of shear rates. We also present results of the study of the rheology of the solder pastes and flux mediums using the structural kinetic modelling approach, which postulates that the network structure of solder pastes breaks down irreversibly under shear, leading to time and shear dependent changes in the flow properties. Our results show that for the solder pastes used in the study, the rate and extent of thixotropy was generally found to increase with increasing shear rate. The technique demonstrated in this study has wide utility for R&D personnel involved in new paste formulation, for implementing quality control procedures used in solder paste manufacture and packaging; and for qualifying new flip-chip assembly lines