HIRFL单丝束流剖面监测器的运动控制系统

在HIRFL的束流诊断中,研制了单丝束流剖面监测器。文章介绍了单丝束流剖面监测器运动控制部分基于PLC和步进电机驱动器的实现,对运动控制系统的硬件和软件的设计做了详细的介绍。整个系统已经通过调试,能够满足在HIRFL束流诊断中对运动控制的要求。

中能区丰中子核~(11)Li的反应总截面的测量(英文)

利用HIRFL提供的50MeV/u的~(13)C束流轰击Be靶,通过RIBLL选择出放射性核素~(11)Li.实验采用透射法测量了25—45MeV/u的~(11)Li在~(28)Si靶上的反应总截面.采用双参数Gauss密度分布形式,利用Glauber模型很好地拟合了高能和中能区的~(11)Li实验数据,并从密度分布中提取了核的物质均方根半径.

Tune调制对HIRFL-CSRm动力学孔径影响的模拟研究

通过引进包含tune调制的传输矩阵,模拟计算了由四极铁电源纹波所引起的tune调制对HIR-FL-CSRm动力学孔径的影响。模拟计算中,对HIRFL-CSRm实际(lattice)跟踪1.0×106圈。从结果可以看出,动力学孔径随调制振幅的增大迅速减小,大体呈线性变化;动力学孔径随调制tune值的变化在研究范围内也有变化,变化的范围在0.049~0.089m之间。

介质型脉冲高能中子探测器

首次报道一种基于反冲质子法和高速带电粒子在物质表面引起二次电子发射的高能中子探测方法 ,研制成功的新一代强流脉冲高能中子探测器 ,即介质型脉冲高能中子探测器 .与传统的强流脉冲中子探测器相比 ,该探测器对中子的探测及信号的传输过程是在介质中完成的 ,因而不需要真空和高压也可以正常工作 ,并具有多项优异的物理性能 .该探测器的输出信号来自于高能中子在聚乙烯转换靶产生的高能反冲质子和这些质子穿越电荷收集极表面时产生的部分二次电子 .选择适当的卡阈吸收片和电荷收集极材料 ,二次电子在探测灵敏度中的份额及其随能量的变化可由实验测定

Measurement of total reaction cross section for neutron-rich nucleus Li-11 on Si-28 target at medium energy

The neutron-rich nucleus Li-11 is separated by the radioactive ion beam line RIBLL at HIRFL from the breakup of 50MeV/u C-13 on Be target. The total reaction cross sections for Li-11 at energies range from 25 to 45MeV/u on Si target have been measured by using the transmission method. The experimental data at high and low energies can be fitted well by Glauber model using two Gauss density distribution. The matter radius of Li-11 was also deduced.

长期不同培肥黑土磷酸酶活性动态变化及其影响因素

<正> 由于自然环境恶化和不合理的农业经营方式,导致黑土质量下降。长期以来从土壤理化性质方面对黑土质量下降原因的研究较多,而从土壤生

不同坡度草地含沙水流水力学特性及其拦沙机理

参照黄土区侵蚀降雨和坡面片蚀产沙特征,采用恒流泥沙输送装置模拟坡面上方来水来沙,探讨不同坡度草地含沙水流的水力学特性及其对上方来沙的拦蓄机理。结果表明,草地坡面的水流弗劳德数随坡度增大而增加,而阻力系数与坡度呈反势。按明渠水流的一般标准,不同坡度草地水流均为层状缓流。草地坡面拦沙效应随坡度增大而减小,且径流前期的减沙作用较后期更为显著。不同坡度草地坡面的出流泥沙平均直径和大颗粒(>10μm)泥沙含量均显著小于上方来沙,这说明草地的拦沙效应主要体现在对大粒径泥沙的拦蓄上。

Poly(ethylene glycol-co-propylene glycol) as a Macromolecular Plasticizing Agent for Polylactide: Thermomechanical Properties and Aging

Finding a Suitable plasticizer for polylactide (PLA) is necessary to overcome its brittleness and enlarge its range of applications. In this study, commercial PLA was melt-blended with a new plasticizer, an ethylene glycol/propylene glycol random copolymer [poly(ethylene glycol-co-propylene glycol) (PEPG)] with a typical number-average molecular weight of 1.2 kDa and an ethylene glycol content of 78.7 mol %. The thermal properties, crystallization behavior, and mechanical properties of the quenched blends and the properties of the blends after storage for 2 months under the ambient conditions were investigated in detail. The advantage of using PEPG is that it does not crystallize at room temperature and has good compatibility with PLA. The quenched PLA/PEPG blends were homogeneous and amorphous systems. With an increase in the PEPG content (5-20%), the glass-transition temperature, tensile strength, and modulus of the blends decreased, whereas the elongation at break and crystallizability increased dramatically. The cold crystallization of PLA resulted in phase separation of the PLA/PEPG blends by annealing of the blends at the crystallization temperature.

Structural analysis of selected characteristic flavones by electrospray tandem mass spectrometry

Seven structure analogical flavonoid aglycones have been analyzed using electrospray ionization tandem mass spectrometry (ESI-MSn) in the negative-ion mode. The spectra obtained ESI-MSn allowed us to propose plausible schemes for their fragmentation mechanism. By analyzing the product ions spectra of deprotonated molecule ions [M-H](-), some neutral diagnostic losses and specific retro Diels-Alder fragments were obtained. By using all of these characteristic fragment ions we can specially differentiate the flavone isomer.

Synthesis of gold nanoplates by aspartate reduction of gold chloride

Single crystal nanoplates with thickness less than 30 nm, characterized by hexagonal and truncated triangular shapes bounded mainly by {111} facets, were obtained in large quantities by aspartate reduction of gold chloride.

Superhydrophobic PTFE surfaces by extension

A rather simple but yet effective way to achieve a superhydrophobic film by extending a Teflon film is proposed. The water contact angle can be increased from 118 to 165degrees by extending to ca. 190%. The fibrous crystals and the increasing distance between the fibrous crystals are believed responsible for the high water-contact angle. It indicates that the density of the aligned microstructures is very important for the superhydrophobicity.