Self-assembly of a tetranuclear macrocyclic copper(II) complex

A dinuclear macrocyclic complex is synthesized via the one-pot reaction of dipotassium nitroacetate, formaldehyde and a linear tetraamine copper(II) complex; the X-ray crystal structure of the product reveals an association of two dinuclear complexes to form a novel tetracopper(II) species.

Using gold nanoparticles in protein crystallography: studies in crystal growth and derivatization

Dissertation for the Master Degree in Structural and Functional Biochemistry

Semipermeable capsules wrapping a multifunctional and self-regulated co-culture microenvironment for osteogenic differentiation

A new concept of semipermeable reservoirs containing co-cultures of cells and supporting microparticles is presented, inspired by the multi-phenotypic cellular environment of bone. Based on the deconstruction of the â stem cell nicheâ , the developed capsules are designed to drive a self-regulated osteogenesis. PLLA microparticles functionalized with collagen I, and a co-culture of adipose stem (ASCs) and endothelial (ECs) cells are immobilized in spherical liquified capsules. The capsules are coated with multilayers of poly(L-lysine), alginate, and chitosan nano-assembled through layer-by-layer. Capsules encapsulating ASCs alone or in a co-culture with ECs are cultured in endothelial medium with or without osteogenic differentiation factors. Results show that osteogenesis is enhanced by the co-encapsulation, which occurs even in the absence of differentiation factors. These findings are supported by an increased ALP activity and matrix mineralization, osteopontin detection, and the up regulation of BMP-2, RUNX2 and BSP. The liquified co-capsules also act as a VEGF and BMP-2 cytokines release system. The proposed liquified capsules might be a valuable injectable self-regulated system for bone regeneration employing highly translational cell sources.

Cysteine-rich Domain 1 of CD40 Mediates Receptor Self-assembly.

The activation of CD40 on B cells, macrophages, and dendritic cells by its ligand CD154 (CD40L) is essential for the development of humoral and cellular immune responses. CD40L and other TNF superfamily ligands are noncovalent homotrimers, but the form under which CD40 exists in the absence of ligand remains to be elucidated. Here, we show that both cell surface-expressed and soluble CD40 self-assemble, most probably as noncovalent dimers. The cysteine-rich domain 1 (CRD1) of CD40 participated to dimerization and was also required for efficient receptor expression. Modelization of a CD40 dimer allowed the identification of lysine 29 in CRD1, whose mutation decreased CD40 self-interaction without affecting expression or response to ligand. When expressed alone, recombinant CD40-CRD1 bound CD40 with a KD of 0.6 μm. This molecule triggered expression of maturation markers on human dendritic cells and potentiated CD40L activity. These results suggest that CD40 self-assembly modulates signaling, possibly by maintaining the receptor in a quiescent state.

Role of beta-1 integrin in tumor growth and dissemination

SUMMARY Cancer is one of the leading causes of disease-related mortality. In most cases, death is due to the spread of cells from the primary tumor to distant sites causing formation of metastases. To become tumorigenic, cells should acquire ability, including self-sufficiency in growth signals, insensitivity to anti-growth signals, resistance to apoptosis, sustained angiogenesis, limitless replicative potential and tissue invasion and metastasis. Tumor progression depends, in part on the relationship between tumor cells and host tissue stroma, characterized by changes of tumor cell adhesion to their microenvironment and activation of a variety of extracellular proteases that play a role in ECM degradation. integrins are adhesion proteins implicated in tumorigenesis. Their main function is to mediate cell adhesion to the ECM or to other cells and to create a link between the ECM and the cytoskeleton. Tumor cells like normal cells use integrins to attach to ECM, migrate into surrounding tissues and derive survival and growth signals. Integrin-dependent adhesion and migration are thought to play an important role in tumor dissemination. A strategy was designed to address the role of β1 integrin tumor growth and dissemination. Murine mammary carcinoma (TA3) cells were stably transfected with a soluble β1 integrin construct, which is anticipated to play a dominant negative role, being able to associate with different α-subunits expressed on the cell surface but unable to transduce signals to the nucleus. Results from studies based on soluble β1 integrin TA3 transfectants showed that 1) the integrin expression pattern at the cell surface changed with an induction of α2β1 and α5β1 heterodimers; 2) adhesion to collagens, especially collagen I was increased; 3) tumor dissemination after intrape-ritoneal injection in syngeneic mice was abolished and 4) local growth after orthotopic injection was maintained but delayed. Taken together, the data presented here suggest that β1 integrin plays a potentially important role in the regulation of tumor behavior. RESUME Le cancer est une des principales causes de mortalité suite à une maladie. Dans la plupart des cas, la mort est la conséquence de la dissémination de cellules, provenant de la tumeur primaire, dans des endroits distants et causant la formation de métastases. Afin de devenir cancéreuse, une cellule doit acquérir certaines capacités, telles qu'une auto-suffisance en facteurs de croissance, une insensibilité aux facteurs empêchant la croissance cellulaire, une résistance à l'apoptose, une angiogénèse soutenue, un potentiel de réplication illimité et une capacité à pénétrer dans les tissus et à former des colonies métastatiques. La progression d'une tumeur dépend, en partie, de la relation entre les cellules tumorales et les cellules tissulaires de l'hôte. Cette relation est caractérisée par des modifications des cellules tumorales quant à leur adhésion au microenvironnement et à l'activation de protéases qui permettent de dégrader la matrice extracellulaire. Les intégrines sont des protéines impliquées dans le développement tumoral. Leur fonction principale est de réguler l'adhésion des cellules à la matrice extracellulaire, ou à d'autres cellules, et de créer un lien entre cette matrice extracellulaire et le cytosquelette. Les cellules tumorales utilisent également les intégrines pour se lier à la matrice extracellulaire, pour migrer dans les tissus adjacents et pour induire des signaux de croissance et de survie. Ces événements d'adhésion et de migration, qui dépendent des intégrines, jouent un rôle primordial dans la dissémination des cellules cancéreuses. Une stratégie a été élaborée afin de définir le rôle de l'intégrine β1 durant la croissance et la dissémination des cellules tumorales. Des cellules provenant d'un carcinome de la glande mammaire (TA3) ont été transfectées de manière stable avec un vecteur contenant la séquence codante de la partie extracellulaire de l'intégrine β1. L'intégrine tronquée doit être capable de se lier aux sous-unités α exprimées à la surface de la cellule, mais doit être incapable de transmettre un signal à l'intérieur de la cellule. Les résultats obtenus avec les cellules TA3 transfectées contenant l'intégrine β1 soluble montrent que I) le répertoire d'expression des intégrines à la surface de la cellule a changé en faveur des hétérodimères α2β1 et α5β1; 2) l'adhésion aux collagènes, particulièrement au collagène de type I a augmenté; 3) la dissémination des cellules tumorales après une injection intrapéritonéale est empêchée; 4) la croissance tumorale après une injection orthotopique est conservée mais retardée. Ces résultats montrent que l'intégrine β1 joue un rôle primordial dans la régulation du comportement tumoral.

Family Development and Self-Sufficiency Program, Annual Report, 2008

Iowa’s Family Development and Self-Sufficiency (FaDSS) Grant Program was created by the 1988 Iowa General Assembly to assist Family Investment Program (FIP) families with significant or multiple barriers reach self-sufficiency. FaDSS provides services that promote, empower, and nurture families towards economic and emotional self-sufficiency. The foundation of FaDSS is regular home visits with families, using a strength-based approach. Core services include support, goal setting, and assessment. Support is given in many ways such as referrals, group activities, linking families to communities and advocacy. Assessment aids the family to identify strengths that they possess that may be used to eliminate barriers to self-sufficiency. Goal setting helps families break down goals that seem out of reach into small steps that will lead to success. Participation in FaDSS is a voluntary option for people receiving Family Investment Program (FIP) benefits.

Family Development and Self-Sufficiency 2011 Annual Report, 2011

Iowa’s Family Development and Self-Sufficiency (FaDSS) Grant Program was created by the 1988 Iowa General Assembly to assist Family Investment Program (FIP) families with significant or multiple barriers reach self-sufficiency. FaDSS provides services that promote, empower, and nurture families toward economic and emotional self-sufficiency.

Viral self-assembly as a thermodynamic process

The protein shells, or capsids, of nearly all spherelike viruses adopt icosahedral symmetry. In the present Letter, we propose a statistical thermodynamic model for viral self-assembly. We find that icosahedral symmetry is not expected for viral capsids constructed from structurally identical protein subunits and that this symmetry requires (at least) two internal switching configurations of the protein. Our results indicate that icosahedral symmetry is not a generic consequence of free energy minimization but requires optimization of internal structural parameters of the capsid proteins

Self-organizing propagation patterns from dynamic self-assembly in monolayers

Propagation of localized orientational waves, as imaged by Brewster angle microscopy, is induced by low intensity linearly polarized light inside axisymmetric smectic-C confined domains in a photosensitive molecular thin film at the air/water interface (Langmuir monolayer). Results from numerical simulations of a model that couples photoreorientational effects and long-range elastic forces are presented. Differences are stressed between our scenario and the paradigmatic wave phenomena in excitable chemical media.

Self-organizing propagation patterns from dynamic self-assembly in monolayers

Propagation of localized orientational waves, as imaged by Brewster angle microscopy, is induced by low intensity linearly polarized light inside axisymmetric smectic-C confined domains in a photosensitive molecular thin film at the air/water interface (Langmuir monolayer). Results from numerical simulations of a model that couples photoreorientational effects and long-range elastic forces are presented. Differences are stressed between our scenario and the paradigmatic wave phenomena in excitable chemical media.

Viral self-assembly as a thermodynamic process

The protein shells, or capsids, of nearly all spherelike viruses adopt icosahedral symmetry. In the present Letter, we propose a statistical thermodynamic model for viral self-assembly. We find that icosahedral symmetry is not expected for viral capsids constructed from structurally identical protein subunits and that this symmetry requires (at least) two internal switching configurations of the protein. Our results indicate that icosahedral symmetry is not a generic consequence of free energy minimization but requires optimization of internal structural parameters of the capsid proteins

Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin filmsdeposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithographypatterns (in-plane anisotropy). Finally, self-assembly properties were tested with silicananoparticles, which were successfully assembled in linear arrays following the generated patterns. Among the main applications, these surfaces could be suitable as particle filter selector and cell colony substrate.

The Impact of Mindfulness Meditation on Educator Growth and Professional Development: A Personal Account

This study examined the use of mindfulness meditation in educator growth and professional development. The purpose was to create recommendations for an effective mindfulness meditation practice for educators. To this end, as the researcher is an educator as well as an experienced mindfulness meditation practitioner, the research methodology was self-study through narrative inquiry. The exploration of mindfulness meditation on the researcher’s personal and professional development was viewed through the lenses of Maslow’s hierarchy of needs and Mezirow’s transformational learning theory. These theories provided an analytical framework that guided this research. Themes were drawn from the exploration and connected with academic literature. The results were a mindfulness meditation framework for educators that is based on the Socratic Method, and utilizes the conceptual frameworks of Maslow’s hierarchy of needs and Mezirow’s transformational learning theory.

Supporting social-cognitive development in the elementary years: The role of executive function and self-regulation

Every day we make decisions that have repercussions. Sometimes the effects are immediate and intended; other times the effects might be unintended or might not be apparent for years. As parents or educators, part of our role is to support the development of children’s decision-making skills, helping them to develop patterns of adaptive decision-making that will serve them well in their current lives and into the future. Part of successful decision-making involves self-control, a system served by the brain’s executive functions (EF). This involves the ability to put aside immediate reactions and base decisions on a variety of important considerations. Social-cognitive development, the ongoing improvement of the ability to get along with others and to understand others’ emotions, expressions, motivations, and intents, relies, to a large degree, on the same EF systems. The current paper explores the interaction of these two factors (the role of EF in social-cognitive development), explores the research to determine the most effective approaches to improving both factors, and develops a handbook providing activities for educators to use while supporting the growth of both EF and social-cognitive skills. Results of a needs assessment reveal that the majority (59%) of educators surveyed had never used a social skills improvement program in their classrooms, while a full 95% believed that social skills are important or very important for a student’s academic success.

Actin cytoskeleton regulates pollen tube growth and tropism

La fertilisation chez les plantes dépend de la livraison des cellules spermatiques contenues dans le pollen à l’ovule. Au contact du stigmate, le grain de pollen s’hydrate et forme une protubérance, le tube pollinique, chargé de livrer les noyaux spermatiques à l’ovule. Le tube pollinique est une cellule à croissance rapide, anisotrope et non autotrophe; ainsi tout au long de sa croissance à travers l’apoplaste du tissu pistillaire, le tube pollinique puise ses sources de carbohydrates et de minéraux du pistil. Ces éléments servent à la synthèse des constituants de la paroi qui seront acheminés par des vésicules de sécrétion jusqu’à l’apex du tube. Ce dernier doit aussi résister à des pressions mécaniques pour maintenir sa forme cylindrique et doit répondre à différents signaux directionnels pour pouvoir atteindre l’ovule. Mon projet de doctorat était de comprendre le rôle du cytosquelette dans la croissance anisotrope du tube pollinique et d’identifier les éléments responsables de sa croissance et de son guidage. Le cytosquelette du tube pollinique est composé des microfilaments d’actine et des microtubules. Pour assurer une bonne croissance des tubes polliniques in vitro, les carbohydrates et les éléments de croissance doivent être ajoutés au milieu à des concentrations bien spécifiques. J’ai donc optimisé les conditions de croissance du pollen d’Arabidopsis thaliana et de Camellia japonica qui ont été utilisés avec le pollen de Lilium longiflorum comme modèles pour mes expériences. J’ai développé une méthode rapide et efficace de fixation et de marquage du tube pollinique basée sur la technologie des microondes. J’ai aussi utilisé des outils pharmacologiques, mécaniques et moléculaires couplés à différentes techniques de microscopie pour comprendre le rôle du cytosquelette d’actine lors de la croissance et le tropisme du tube pollinique. J’ai trouvé que le cytosquelette d’actine et plus précisément l’anneau d’actine localisé dans la partie sub-apicale du tube est fortement impliqué dans la croissance et le maintien de l’architecture du tube à travers le contrôle de la livraison des vésicules de sécrétion. J’ai construit une chambre galvanotropique qui peut être montée sur un microscope inversé et qui sert à envoyer des signaux tropistiques bien précis à des tubes polliniques en croissance. J’ai trouvé que les filaments d’actine sont impliqués dans la capacité du tube pollinique à changer de direction. Ce comportement tropistique dépend de la concentration du calcium dans le milieu de croissance et du flux de calcium à travers des canaux calciques. Le gradient de calcium établi dans le tube pollinique affecte l’activité de certaines protéines qui se lient à l’actine et dont le rôle est la réorganisation des filaments d’actine. Parmi ces protéines, il y a celles de dépolymérisation de l’actine (ADF) dont deux spécifiquement exprimées dans le gamétophyte mâle d’Arabidopsis (ADF7 et ADF10). Par marquage avec des proteins fluorescents, j’ai trouvé que l’ADF7 et l’ADF10 ont des expressions différentielles pendant la microsporogenèse et la germination et croissance du tube pollinique et qu’elles partagent entre elles des rôles importants durant ces différents stades.