Suorituskykymittariston suunnittelu suuren teknologiateollisuuden organisaation asiantuntijatiimissä

Suorituskyvyn mittaamisella voidaan tehokkaasti vaikuttaa yrityksen tavoitteiden saavuttamiseen. Suorituskykyä kuvaavat mittarit ohjaavat yritystä strategian toteuttamisessa ja toiminnan kehittämisessä visiossa määriteltyyn suuntaan. Yrityksen suorituskykyä mitataan hyvin usein yksistään yritystasolla, mutta suorituskyvyn mittaaminen voidaan viedä myös tiimitasolle asti. Tämän työn tavoitteena oli identifioida ominaispiirteitä suuren organisaation asiantuntijatiimin suorituskykymittaristolle jo sen suunnitteluvaiheessa. Tutkimuskysymyksiin pyrittiin löytämään vastauksia yhtäältä kohdeyritykselle implementoidun suunnitteluprosessin avulla ja toisaalta myös suorituskyvyn mittaamista käsittelevän kirjallisuuden kautta. Huomattavin erityispiirre suorituskykymittaristoa suunnitellessa oli suuren organisaation asiantuntijatyön huomioiminen, sillä tietointensiivisen asiantuntijatiimin työn mittaaminen on vaativaa. Suorituskyvyn mittaaminen virtaviivaistaa sekä yrityksen tavoitteiden viestintää henkilöstölle että sen päätöksentekoa. Toimiva suorituskykymittaristo voidaan luoda suunnitteluprosessin avulla, joista kirjallisuudessa on useita malleja. Tehokkaan suunnitteluprosessin taustalla on johdon ja henkilöstön sitoutuminen suunnitteluun, jotta mittaristosta tulisi mahdollisimman onnistunut. Suorituskykymittariston suunnitteluprosessissa yrityksen visiosta ja strategiasta johdetaan mittausalueet ja menestystekijät, joiden avulla strategia pyritään toteuttamaan ja visio saavuttamaan. Asiantuntijatiimin suorituskyvyn mittauksessa on tärkeätä spesifioida relevantit mittarit, jotta asetetut tavoitteet saavutetaan ja haasteellista tietointensiivistä asiantuntijatyötä voidaan tehokkaasti mitata. Suunnitteluvaiheessa oleellinen osa suunnittelutyötä on mittausjärjestelmän riittävä ja huolellinen dokumentaatio, jotta mahdolliset muutokset implementointivaiheessa voitaisiin toteuttaa systemaattisesti ja tehokkaasti.

Solid-state reference and ion-selective electrodes : towards portable potentiometric sensing

Potentiometric sensors are very attractive tools for chemical analysis because of their simplicity, low power consumption and low cost. They are extensively used in clinical diagnostics and in environmental monitoring. Modern applications of both fields require improvements in the conventional construction and in the performance of the potentiometric sensors, as the trends are towards portable, on-site diagnostics and autonomous sensing in remote locations. The aim of this PhD work was to improve some of the sensor properties that currently hamper the implementation of the potentiometric sensors in modern applications. The first part of the work was concentrated on the development of a solid-state reference electrode (RE) compatible with already existing solid-contact ion-selective electrodes (ISE), both of which are needed for all-solid-state potentiometric sensing systems. A poly(vinyl chloride) membrane doped with a moderately lipophilic salt, tetrabutylammonium-tetrabutylborate (TBA-TBB), was found to show a satisfactory stability of potential in sample solutions with different concentrations. Its response time was nevertheless slow, as it required several minutes to reach the equilibrium. The TBA-TBB membrane RE worked well together with solid-state ISEs in several different situations and on different substrates enabling a miniature design. Solid contacts (SC) that mediate the ion-to-electron transduction are crucial components of well-functioning potentiometric sensors. This transduction process converting the ionic conduction of an ion-selective membrane to the electronic conduction in the circuit was studied with the help of electrochemical impedance spectroscopy (EIS). The solid contacts studied were (i) the conducting polymer (CP) poly(3,4-ethylienedioxythiophene) (PEDOT) and (ii) a carbon cloth having a high surface area. The PEDOT films were doped with a large immobile anion poly(styrene sulfonate) (PSS-) or with a small mobile anion Cl-. As could be expected, the studied PEDOT solid-contact mediated the ion-toelectron transduction more efficiently than the bare glassy carbon substrate, onto which they were electropolymerized, while the impedance of the PEDOT films depended on the mobility of the doping ion and on the ions in the electrolyte. The carbon cloth was found to be an even more effective ion-to-electron transducer than the PEDOT films and it also proved to work as a combined electrical conductor and solid contact when covered with an ion-selective membrane or with a TBA-TBB-based reference membrane. The last part of the work was focused on improving the reproducibility and the potential stability of the SC-ISEs, a problem that culminates to the stability of the standard potential E°. It was proven that the E° of a SC-ISE with a conducting polymer as a solid contact could be adjusted by reducing or oxidizing the CP solid contact by applying current pulses or a potential to it, as the redox state of the CP solid-contact influences the overall potential of the ISE. The slope and thus the analytical performance of the SC-ISEs were retained despite the adjustment of the E°. The shortcircuiting of the SC-ISE with a conventional large-capacitance RE was found to be a feasible instrument-free method to control the E°. With this method, the driving force for the oxidation/reduction of the CP was the potential difference between the RE and the SC-ISE, and the position of the adjusted potential could be controlled by choosing a suitable concentration for the short-circuiting electrolyte. The piece-to-piece reproducibility of the adjusted potential was promising, and the day-today reproducibility for a specific sensor was excellent. The instrumentfree approach to control the E° is very attractive considering practical applications.

Work and non-work : on work and meaning

I den politiska retoriken florerar debattinlägg om arbetslivet, och målsättningen är för det mesta att så många som möjligt ska arbeta så länge som möjligt. Att skapa jobb och minimera arbetslösheten ses som de främsta utmaningarna. På ett individuellt plan beskrivs arbete ofta som personligt självförverkligande eller som en nödvändig form av inkomst som kräver att livet struktureras enligt behovet av sysselsättning. I avhandlingen diskuteras hur de här till synes självklara rollerna som arbete spelar kan sägas neutralisera arbete. Med detta menas att kontroverser kring arbetets mening åsidosätts så att politiskt och etiskt grundläggande frågor om ett gott liv och mänskliga gemenskaper inte ges plats. Genom att gå i dialog med kritiska tänkare som Hannah Arendt, André Gorz, Kathi Weeks, Karl Marx och Richard Sennett diskuteras riskerna med att behandla arbete som en resurs, ett gemensamt samhällsprojekt eller individuellt självförverkligande. Vad är nödvändigt arbete? Vad innebär det att arbete är en vara? Vad är problemet med fragmentering av arbete? Det sägs ofta att arbete har blivit alltmer gränslöst – är detta något positivt eller negativt? Utifrån sådana frågor tar avhandlingen fasta på spänningar i arbetets roll i våra liv och i samhället. Genom att artikulera spänningar utmanas en neutralisering av arbetets etiskt och politiskt brännbara dimensioner. Avhandlingen syftar därmed till att lyfta fram ständigt pågående sätt att ifrågasätta och reflektera kring arbetets mening.

Pyörivän keskiökärjen rakenteen kehittäminen työstövärähtelyjen välttämiseksi sorvauksessa

Tässä diplomityössä käsitellään sorvauksen työstövärähtelyjen ja sorvin keskiökärjen rakenteen yhteyttä. Työ on osa Lappeenrannan teknillisen yliopiston VMAX-projektia, ja sen taustalla on pyrkimys uudenlaisen, sorvin kärkipylkän puristusvoiman ajonaikaiseen säätämiseen perustuvan työstövärähtelyjen välttämismenetelmän kehittämiseen. Tämän menetelmän toiminnan todentaminen oli työn ensimmäinen tavoite. Menetelmän toteuttaminen asettaa kuitenkin käytetyn keskiökärjen rakenteelle tiettyjä vaatimuksia. Työn toisena tavoitteena oli nämä vaatimukset täyttävän keskiökärjen prototyypin kehittäminen. Tutkimus eteni seuraavasti. Ensimmäiseksi ongelma määriteltiin tutustumalla työn teoreettiseen taustaan ja aiheeseen liittyvään tutkimukseen Lappeenrannan teknillisestä yliopistosta ja muualta. Myös keskiökärkiä valmistavien yritysten tuotekatalogeja tarkasteltiin. Seuraavaksi siirryttiin alustavaan suunnitteluvaiheeseen, jossa verifioitiin menetelmän toiminta ja luotiin konsepteja keskiökärjen rakenteen kehittämistä varten. Tämän alustavan vaiheen jälkeen suoritettiin suunnitteluprosessi keskiökärjen prototyypille. Lopuksi, suunnitellun prototyypin rakenteen käyttäytymistä arvioitiin tietokonemallinnuksen avulla. Lisätuloksena tutkimuksen aikana johdettiin yksinkertaistettu elementtimenetelmään perustuva laskentamalli järjestelmän ominaistaajuuksien selvittämiseksi. Laskentamallin tarkkuutta arvoitiin. Suunnitteluprosessin tuloksena saatiin kaikki menetelmän toiminnan sekä normaalin käytön asettamat vaatimukset täyttävä rakenne keskiökärjen prototyypille. Myös johdetun laskentamallin tulokset ovat varsin lähellä 3D-elementtimallinnuksen antamia tuloksia. Tutkimuksen tavoitteiden voidaan siis sanoa toteutuneen. Koska prototyyppiä ja laskentamallia ei kuitenkaan ole vielä kokeellisesti verifioitu, tämä ei ole täysin varmaa.

How computer programmers work : understanding software development in practise

Hur arbetar en framgångsrik programmerare? Uppgifterna att programmera datorspel och att programmera industriella, säkerhetskritiska system verkar tämligen olika. Genom en noggrann empirisk undersökning jämför och kontrasterar avhandlingen dessa två former av programmering och visar att programmering innefattar mer än teknisk förmåga. Med utgångspunkt i hermeneutisk och retorisk teori och med hjälp av både kulturvetenskap och datavetenskap visar avhandlingen att programmerarnas tradition och värderingar är grundläggande för deras arbete, och att båda sorter av programmering kan uppfattas och analyseras genom klassisk texttolkningstradition. Dessutom kan datorprogram betraktas och analyseras med hjälp av klassiska teorier om talproduktion i praktiken - program ses då i detta sammanhang som ett slags yttranden. Allt som allt förespråkar avhandlingen en återkomst till vetenskapens grunder, vilka innebär en ständig och oupphörlig cyklisk rörelse mellan att erfara och att förstå. Detta står i kontrast till en reduktionistisk syn på vetenskapen, som skiljer skarpt mellan subjektivt och objektivt, och på så sätt utgår från möjligheten att uppnå fullständigt vetande. Ofullständigt vetande är tolkandets och hermeneutikens domän. Syftet med avhandlingen är att med hjälp av exempel demonstrera programmeringens kulturella, hermeneutiska och retoriska natur.

Sleep, ageing and night work

Studies have shown that the frequency or worsening of sleep disorders tends to increase with age and that the ability to perform circadian adjustments tends to decrease in individuals who work the night shift. This condition can cause consequences such as excessive sleepiness, which are often a factor in accidents that occur at work. The present study investigated the effects of age on the daytime and nighttime sleep patterns using polysomnography (PSG) of long-haul bus drivers working fixed night or day shifts. A total of 124 drivers, free of sleep disorders and grouped according to age (<45 years, N = 85, and ≥45 years, N = 39) and PSG timing (daytime (D) PSG, N = 60; nighttime (N) PSG, N = 64) participated in the study. We observed a significant effect of bedtime (D vs N) and found that the length of daytime sleep was shorter [D: <45 years (336.10 ± 73.75 min) vs N: <45 years (398 ± 78.79 min) and D: ≥45 years (346.57 ± 43.17 min) vs N: ≥45 years (386.44 ± 52.92 min); P ≤ 0.05]. Daytime sleep was less efficient compared to nighttime sleep [D: <45 years (78.86 ± 13.30%) vs N: <45 years (86.45 ± 9.77%) and D: ≥45 years (79.89 ± 9.45%) and N: ≥45 years (83.13 ± 9.13%); P ≤ 0.05]. An effect of age was observed for rapid eye movement sleep [D: <45 years (18.05 ± 6.12%) vs D: ≥45 years (15.48 ± 7.11%) and N: <45 years (23.88 ± 6.75%) vs N: ≥45 years (20.77 ± 5.64%); P ≤ 0.05], which was greater in younger drivers. These findings are inconsistent with the notion that older night workers are more adversely affected than younger night workers by the challenge of attempting to rest during the day.

Relationship between work rate and oxygen uptake in mitochondrial myopathy during ramp-incremental exercise

We determined the response characteristics and functional correlates of the dynamic relationship between the rate (Δ) of oxygen consumption ( O2) and the applied power output (work rate = WR) during ramp-incremental exercise in patients with mitochondrial myopathy (MM). Fourteen patients (7 males, age 35.4 ± 10.8 years) with biopsy-proven MM and 10 sedentary controls (6 males, age 29.0 ± 7.8 years) took a ramp-incremental cycle ergometer test for the determination of the O2 on-exercise mean response time (MRT) and the gas exchange threshold (GET). The ΔO2/ΔWR slope was calculated up to GET (S1), above GET (S2) and over the entire linear portion of the response (S T). Knee muscle endurance was measured by isokinetic dynamometry. As expected, peak O2 and muscle performance were lower in patients than controls (P < 0.05). Patients had significantly lower ΔO2/ΔWR than controls, especially the S2 component (6.8 ± 1.5 vs 10.3 ± 0.6 mL·min-1·W-1, respectively; P < 0.001). There were significant relationships between ΔO2/ΔWR (S T) and muscle endurance, MRT-O2, GET and peak O2 in MM patients (P < 0.05). In fact, all patients with ΔO2/ΔWR below 8 mL·min-1·W-1 had severely reduced peak O2 values (<60% predicted). Moreover, patients with higher cardiopulmonary stresses during exercise (e.g., higher Δ ventilation/carbon dioxide output and Δ heart rate/ΔO2) had lower ΔO2/ΔWR (P < 0.05). In conclusion, a readily available, effort-independent index of aerobic dysfunction during dynamic exercise (ΔO2/ΔWR) is typically reduced in patients with MM, being related to increased functional impairment and higher cardiopulmonary stress.

Dynamics of chest wall volume regulation during constant work rate exercise in patients with chronic obstructive pulmonary disease

This study evaluated the dynamic behavior of total and compartmental chest wall volumes [(V CW) = rib cage (V RC) + abdomen (V AB)] as measured breath-by-breath by optoelectronic plethysmography during constant-load exercise in patients with stable chronic obstructive pulmonary disease. Thirty males (GOLD stages II-III) underwent a cardiopulmonary exercise test to the limit of tolerance (Tlim) at 75% of peak work rate on an electronically braked cycle ergometer. Exercise-induced dynamic hyperinflation was considered to be present when end-expiratory (EE) V CW increased in relation to resting values. There was a noticeable heterogeneity in the patterns of V CW regulation as EEV CW increased non-linearly in 17/30 "hyperinflators" and decreased in 13/30 "non-hyperinflators" (P < 0.05). EEV AB decreased slightly in 8 of the "hyperinflators", thereby reducing and slowing the rate of increase in end-inspiratory (EI) V CW (P < 0.05). In contrast, decreases in EEV CW in the "non-hyperinflators" were due to the combination of stable EEV RC with marked reductions in EEV AB. These patients showed lower EIV CW and end-exercise dyspnea scores but longer Tlim than their counterparts (P < 0.05). Dyspnea increased and Tlim decreased non-linearly with a faster rate of increase in EIV CW regardless of the presence or absence of dynamic hyperinflation (P < 0.001). However, no significant between-group differences were observed in metabolic, pulmonary gas exchange and cardiovascular responses to exercise. Chest wall volumes are continuously regulated during exercise in order to postpone (or even avoid) their migration to higher operating volumes in patients with COPD, a dynamic process that is strongly dependent on the behavior of the abdominal compartment.

Salivary testosterone and immunoglobulin A were increased by resistance training in adults with Down syndrome

This study was designed to assess the influence of resistance training on salivary immunoglobulin A (IgA) levels and hormone profile in sedentary adults with Down syndrome (DS). A total of 40 male adults with DS were recruited for the trial through different community support groups for people with intellectual disabilities. All participants had medical approval for participation in physical activity. Twenty-four adults were randomly assigned to perform resistance training in a circuit with six stations, 3 days per week for 12 weeks. Training intensity was based on functioning in the eight-repetition maximum (8RM) test for each exercise. The control group included 16 age-, gender-, and BMI-matched adults with DS. Salivary IgA, testosterone, and cortisol levels were measured by ELISA. Work task performance was assessed using the repetitive weighted-box-stacking test. Resistance training significantly increased salivary IgA concentration (P=0.0120; d=0.94) and testosterone levels (P=0.0088; d=1.57) in the exercising group. Furthermore, it also improved work task performance. No changes were seen in the controls who had not exercised. In conclusion, a short-term resistance training protocol improved mucosal immunity response as well as salivary testosterone levels in sedentary adults with DS.

Disentangling the effects of insomnia and night work on cardiovascular diseases: a study in nursing professionals

Cardiovascular diseases (CVDs) are known to be associated with poor sleep quality in general populations, but they have not been consistently associated with specific work schedules. Studies of CVD generally do not simultaneously consider sleep and work schedules, but that approach could help to disentangle their effects. We investigated the association between insomnia and a self-reported physician diagnosis of CVD in day and night workers, considering all sleep episodes during nocturnal and diurnal sleep. A cross-sectional study was conducted in 1307 female nursing professionals from 3 public hospitals, using baseline data from the “Health and Work in Nursing - a Cohort Study.” Participants were divided into two groups: i) day workers with no previous experience in night shifts (n=281) and whose data on insomnia were related to nocturnal sleep and ii) those who worked exclusively at night (n=340) and had data on both nocturnal and diurnal sleep episodes, as they often sleep at daytime. Multiple logistic regression analysis was performed. Among day workers, insomnia complaints increased the odds of CVD 2.79-fold (95% CI=1.01-6.71) compared with workers who had no complaints. Among night workers, reports of insomnia during both nocturnal and diurnal sleep increased the odds of reported CVD 3.07-fold (95% CI=1.30-7.24). Workers with insomnia had similar probabilities of reporting CVD regardless of their work schedule, suggesting a relationship to insomnia and not to night work per se. The results also highlighted the importance of including evaluation of all sleep episodes (diurnal plus nocturnal sleep) for night workers.

Thoughts on work-in-progress crowdsourcing metrics of digital collections

The presentation consists of work-in-progress metrics of #digitalkoot, the crowdsourcing project launched by National Library of Finland

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.