A remarkably quick habituation and high use of a rope bridge by an endangered marsupial, the western ringtail possum

Rope bridges are being increasingly installed worldwide to mitigate the negative impacts of roads on arboreal animals. However, monitoring of these structures is still limited and an assessment of factors influencing the crossing behaviours is lacking. We monitored the use of a rope bridge near Busselton, Western Australia by the endangered western ringtail possums (Pseudocheirus occidentalis) in order to identify the patterns of use and factors influencing the crossings. We installed motion sensor cameras and microchip readers on the bridge to record the crossings made by individual animals, and analysed these crossing data using generalised linear models that included factors such as days since the installation of the bridge, breeding season, wind speed, minimum temperature and moonlight. Possums started investigating the bridge even before the installation was completed, and the first complete crossing was recorded only 36 days after the installation, which is remarkably sooner than arboreal species studied in other parts of Australia. The possums crossed the bridge increasingly over 270 days of monitoring at a much higher rate than we expected (8.87 ± 0.59 complete crossings per night). Possums crossed the bridge less on windy nights and warm nights probably due to the risk of being blown away and heat stress on warmer days. Crossings also decreased slightly on brighter nights probably due to the higher risk of predation. Breeding season did not influence the crossings. Pseudocheirus occidentalis habituated to the bridge very quickly, and our results demonstrate that rope bridges have a potential as an effective mitigation measure against the negative impacts of roads on this species. More studies and longer monitoring, as well as investigating whether crossing results in the restoration of gene flow are then needed in order to further assess the true conservation value of these crossing structures.

Use of micro-algae concentrates for hatchery culture of sandfish, Holothuria scabra

Three Instant Algae® (Reed Mariculture Inc., Campbell, CA, USA, 95008) products: (1) mono-cultured Isochrysis sp. (Haptophyceae) (Isochrysis 1800®); (2) mono-cultured Pavlova sp. (Haptophyceae) (Pavlova 1800®); and (3) mono-cultured Thalassiosira weissflogii (Bacillariophyceae) (TW 1200®) were used to feed sandfish (Holothuria scabra) larvae both singly and in ternary combination to assess their nutritional efficacy. Two-day auriculariae were held at a starting density of 0.3 mL-1 and were initially fed a daily ration equivalent to the dry weight of 10,000 cells mL-1 of Isochrysis 1800®. This ration was increased by the dry weight equivalent of 1000 cells mL-1 of Isochrysis 1800® per day as larval development proceeded. Post-settled larvae fed TW 1200® were significantly larger than those fed the ternary diet, Isochrysis 1800® or Pavlova 1800®. There were significant differences in the mean (±SE) survival of auriculariae and post-settled larvae between treatments and survival to settlement was significantly higher (P < 0.05) for larvae fed TW 1200® (13.7 ± 0.7%) alone. Laval development, competency and survival were significantly correlated with dietary levels of total protein, lipid and nitrogen-free extract (NFE), and with total polyunsaturated fatty acid (PUFA) content of the diets, and the levels of some specific fatty acids (FA). The proportion of late auriculariae with hyaline spheres (day 13), numbers of competent doliolariae (day 15) and the total length of post-settled larvae (day 21) were all positively correlated with dietary NFE and palmitic acid (16:0) contents, as well as dietary EPA: DHA ratio. This study is the first comprehensive assessment of the nutritional value of micro-algae concentrates for sandfish larvae based on their nutrient compositions. Our study confirms the feasibility of using commercially available microalgae concentrates as a sole food source for hatchery culture of sandfish, and is the first to report successful hatchery culture of H. scabra without using live micro-algae. All micro-algae concentrates used in this study proved nutritious for H. scabra larvae and supported normal growth and development and relatively high survival, through settlement. Use of commercially available micro-algae concentrates as a replacement for live micro-algae in sandfish hatcheries supports development of cheaper, simpler larval rearing protocols for this species. Statement of relevance: Hatchery culture of sandfish using micro-algae concentrates, without the use of live micro-algae, is a significant finding that supports development of cheaper, simpler larval rearing protocols for this species. Our study provides detailed nutritional compositional data for the products used and on this basis we were able to deduce new information relating to key nutrients for sea cucumber larvae.

Evaluation of the Evidential Value of the Elemental Composition of Glass, Ink and Paper by Laser-Based Micro-Spectrochemical Methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87 – 100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling’s T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.

The use of computer technology to compare and analyze community college dissertations

A purpose of this research study was to demonstrate the practical linguistic study and evaluation of dissertations by using two examples of the latest technology, the microcomputer and optical scanner. That involved developing efficient methods for data entry plus creating computer algorithms appropriate for personal, linguistic studies. The goal was to develop a prototype investigation which demonstrated practical solutions for maximizing the linguistic potential of the dissertation data base. The mode of text entry was from a Dest PC Scan 1000 Optical Scanner. The function of the optical scanner was to copy the complete stack of educational dissertations from the Florida Atlantic University Library into an I.B.M. XT microcomputer. The optical scanner demonstrated its practical value by copying 15,900 pages of dissertation text directly into the microcomputer. A total of 199 dissertations or 72% of the entire stack of education dissertations (277) were successfully copied into the microcomputer's word processor where each dissertation was analyzed for a variety of syntax frequencies. The results of the study demonstrated the practical use of the optical scanner for data entry, the microcomputer for data and statistical analysis, and the availability of the college library as a natural setting for text studies. A supplemental benefit was the establishment of a computerized dissertation corpus which could be used for future research and study. The final step was to build a linguistic model of the differences in dissertation writing styles by creating 7 factors from 55 dependent variables through principal components factor analysis. The 7 factors (textual components) were then named and described on a hypothetical construct defined as a continuum from a conversational, interactional style to a formal, academic writing style. The 7 factors were then grouped through discriminant analysis to create discriminant functions for each of the 7 independent variables. The results indicated that a conversational, interactional writing style was associated with more recent dissertations (1972-1987), an increase in author's age, females, and the department of Curriculum and Instruction. A formal, academic writing style was associated with older dissertations (1972-1987), younger authors, males, and the department of Administration and Supervision. It was concluded that there were no significant differences in writing style due to subject matter (community college studies) compared to other subject matter. It was also concluded that there were no significant differences in writing style due to the location of dissertation origin (Florida Atlantic University, University of Central Florida, Florida International University).

Child-centred design supported by comprehensive child application use analysis

Since children already use and explore applications on smartphones, we use this as the starting point for design. Our monitoring and analysis framework, BaranC, enables us to discover and analyse which applications children uses and precisely how they interact with them. The monitoring happens unobtrusively in the background so children interact normally in their own natural environment without artificial constraints. Thus, we can discover to what extent a child of a particular age engages with, and how they physically interact with, existing applications. This information in turn provides the basis for design of new child-centred applications which can then be subject to the same comprehensive child use analysis using our framework. The work focuses on the first aspect, namely, the monitoring and analysis of current child use of smartphones. Experiments show the value of this approach and interesting results have been obtained from this precise monitoring of child smartphone usage.

Increasing the value of household appliances by adding a heat pump system

Historically, domestic tasks such as preparing food and washing and drying clothes and dishes were done by hand. In a modern home many of these chores are taken care of by machines such as washing machines, dishwashers and tumble dryers. When the first such machines came on the market customers were happy that they worked at all! Today, the costs of electricity and customers’ environmental awareness are high, so features such as low electricity, water and detergent use strongly influence which household machine the customer will buy. One way to achieve lower electricity usage for the tumble dryer and the dishwasher is to add a heat pump system. The function of a heat pump system is to extract heat from a lower temperature source (heat source) and reject it to a higher temperature sink (heat sink) at a higher temperature level. Heat pump systems have been used for a long time in refrigerators and freezers, and that industry has driven the development of small, high quality, low price heat pump components. The low price of good quality heat pump components, along with an increased willingness to pay extra for lower electricity usage and environmental impact, make it possible to introduce heat pump systems in other household products. However, there is a high risk of failure with new features. A number of household manufacturers no longer exist because they introduced poorly implemented new features, which resulted in low quality and product performance. A manufacturer must predict whether the future value of a feature is high enough for the customer chain to pay for it. The challenge for the manufacturer is to develop and produce a high-performance heat pump feature in a household product with high quality, predict future willingness to pay for it, and launch it at the right moment in order to succeed. Tumble dryers with heat pump systems have been on the market since 2000. Paper I reports on the development of a transient simulation model of a commercial heat pump tumble dryer. The measured and simulated results were compared with good similarity. The influence of the size of the compressor and the condenser was investigated using the validated simulation model. The results from the simulation model show that increasing the cylinder volume of the compressor by 50% decreases the drying time by 14% without using more electricity.  Paper II is a concept study of adding a heat pump system to a dishwasher in order to decrease the total electricity usage. The dishwasher, dishware and water are heated by the condenser, and the evaporator absorbs the heat from a water tank. The majority of the heat transfer to the evaporator occurs when ice is generated in the water tank. An experimental setup and a transient simulation model of a heat pump dishwasher were developed. The simulation results show a 24% reduction in electricity use compared to a conventional dishwasher heated with an electric element. The simulation model was based on an experimental setup that was not optimised. During the study it became apparent that it is possible to decrease electricity usage even more with the next experimental setup.

Pilot CBT trial for anxiety in alcohol use disorders treatment

Purpose – The purpose of this paper is to test the effectiveness of a self-directed cognitive behavioural therapy (CBT) booklet allowing immediate access to treatment for anxiety during alcohol use disorder (AUD) interventions. Design/methodology/approach – Parallel pilot randomised controlled trial: 69 individuals in AUD treatment, continued to receive treatment alone (control: n=29) or in addition, a self-directed, four week CBT booklet to manage anxiety (intervention: n=40). Primary outcome measures were changes in state (SAnx) and trait anxiety (TAnx) at four weeks. Secondary outcome measures were changes in adaptive (ACop), maladaptive (MCop) coping and quality of life (QoL, physical (PHQoL), psychological (PSQoL), social (SQoL), environment (EQoL)) at four weeks. Findings – Participants had significantly higher SAnx (p<0.01) and TAnx (p<0.01) baseline scores compared to the general population. There were no statistically significant group changes in SAnx or TAnx (p>0.05). Control group allocation predicted improvement in ACop (p<0.01), MCop (p<0.05), PHQoL (p<0.01), PSQoL (p<0.05) and SQoL (p<0.01); CBT group allocation predicted improvement in EQoL (p=0.05). All effect sizes were small to moderate (Cohen’s d<0.50). Percentage of book completion did not determine changes in anxiety, coping or quality of life. Originality/value – A four week self-directed CBT booklet did not significantly reduce anxiety during AUD treatment. Larger sample sizes will determine the most suitable treatment delivery mode for this type of CBT.

Using digital devices in a first year classroom : a focus on the design and use of phonics software applications

When integrated within a holistic literacy program, phonics applications can be used in classrooms to facilitate students’ self-directed learning of letter-sound knowledge; but are they designed to allow for such a purpose? With most phonics software applications making heavy use of image cues, this project has more specifically investigated whether the design of the images used in such applications may impact on the effectiveness of their self-directed use in classrooms. Using a quasi-experimental study, we compared two types of pictorial mnemonics used in tablet applications, along with teacher-led activity in three first-year classrooms from the one school. The difference between teacher-led activity and integrated picture cues was significant, with teacher-led activity proving more effective. The difference between teacher-led activity and form-taking picture cues, however, was not statistically significant. Given that the outcomes of this small-scale study suggest that image design may be a significant design feature contributing to the educational value of using phonics applications in the classroom, we recommend that the design features of phonics software applications attract further research.

Estimation of water use and crop coefficients for an intensive olive orchard using sap flow measurements and modeled data

Olive tree sap flow measurements were collected in an intensive orchard near Évora, Portugal, during the irrigation seasons of 2013 and 2014, to calculate daily tree transpiration rates (T_SF). Meteorological variables were also collected to calculate reference evapotranspiration (ETo). Both data were used to assess values of basal crop coefficient (Kcb) for the period of the sap flow observations. The soil water balance model SIMDualKc was calibrated with soil, biophysical ground data and sap flow measurements collected in 2013. Validated in 2014 with collected sap flow observations, the model was used to provide estimates of dual e single crop coefficients for 2014 crop growing season. Good agreement between model simulated daily transpiration rates and those obtained with sapflow measurements was observed for 2014 (R2=0.76, RMSE=0.20 mm d-1), the year of validation, with an estimation average absolute error (AAE) of 0.20 mm d-1. Olive modeled daily actual evapotranspiration resulted in atual ETc values of 0.87, 2.05 and 0.77 mm d-1 for 2014 initial, mid- and end-season, respectively. Actual crop coefficient (Kc act) values of 0.51, 0.43 and 0.67 were also obtained for the same periods, respectively. Higher Kc values during spring (initial stage) and autumn (end-stage) were published in FAO56, varying between 0.65 for Kc ini and 0.70 for Kc end. The lower Kc mid value of 0.43 obtained for the summer (mid-season) is also inconsistent with the FAO56 expected Kc mid value of 0.70 for the period. The modeled Kc results are more consistent with the ones published by Allen & Pereira [1] for olive orchards with effective ground cover of 0.25 to 0.5, which vary between 0.40 and 0.80 for Kc ini, 0.40–0.60 for Kc mid with no active ground cover, and 0.35–0.75 for Kc end, depending on ground cover. The SIMDualKc simulation model proved to be appropriate for obtaining evapotranspiration and crop coefficient values for our intensive olive orchard in southern Portugal.

Evaluation of water use, yield and water productivity of a high-density orchard (cv. Cobrançosa) subjected to different irrigation regimes – An account of four years

The impact of different irrigation scheduling regimes on the water use, yield and water productivity from a high-density olive grove cv. Cobrançosa in southern Portugal was assessed during the irrigation seasons of 2011, 2012, 2013 and 2014. The experiments were conducted in a commercial olive orchard at the Herdade Álamo de Cima, near Évora (38o 29' 49.44'' N, 7o 45' 8.83'' W; alt. 75 m) in southern Alentejo, Portugal. The orchard was established with 10-year old Cobrançosa trees in grids of 8.0 x 4.2 m (300 trees ha-1) in the E-W direction, and experiments conducted on a shallow sandy loam Regosoil Haplic soil. From mid-May to the end of September the orchard was irrigated and three plots were subjected to one of two irrigation treatments: a control treatment A, irrigated to replace 100% ETc, a moderate deficit irrigation treatment B irrigated to 70% of ETc, and a more severe deficit irrigation treatment C that provided for approximately 50% of ETc. Daily tree transpiration rates were obtained by continuously monitoring of sap flow in representative trees per treatment. Among the irrigated treatments, water use efficiency (WUE, ratio of water used to irrigation- water applied) of treatment C was the highest, with a value of 0.89, being treatment B slightly lower, with a WUE of 0.76. Olive harvest for 2012 was an exceptional “on year”. Bearing yields showed contrasting differences within years where an “on year” was followed by an “off year”. In 2011 and 2012 treatment B yields were 41 and 50% higher than treatment C, respectively. In 2013 treatment B yield was 45% higher than yield of the fully irrigated treatment A, and treatment C showed practically the same yield than treatment A. In the “on year” of 2014 treatment B averaged 48% higher yield than treatment C. Treatment B farm irrigation water productivity (WPI-Farm, ratio of yield to water applied) was the highest among all treatments. Treatment A showed the lowest conversion efficiency of all treatments, indicating treatment B as the adequate deficit irrigation treatment for our Cobrançosa orchard

Customer Loyalty toward grocery retailing service: a multidimensional approach to costumer perceived value

Structured abstract Purpose: To deepen, in grocery retail context, the roles of consumer perceived value and consumer satisfaction, as antecedents’ dimensions of customer loyalty intentions. Design/Methodology/approach: Also employing a short version (12-items) of the original 19-item PERVAL scale of Sweeney & Soutar (2001), a structural equation modeling approach was applied to investigate statistical properties of the indirect influence on loyalty of a reflective second order customer perceived value model. The performance of three alternative estimation methods was compared through bootstrapping techniques. Findings: Results provided i) support for the use of the short form of the PERVAL scale in measuring consumer perceived value; ii) the influence of the four highly correlated independent latent predictors on satisfaction was well summarized by a higher-order reflective specification of consumer perceived value; iii) emotional and functional dimensions were determinants for the relationship with the retailer; iv) parameter’s bias with the three methods of estimation was only significant for bootstrap small sample sizes. Research limitations:/implications: Future research is needed to explore the use of the short form of the PERVAL scale in more homogeneous groups of consumers. Originality/value: Firstly, to indirectly explain customer loyalty mediated by customer satisfaction it was adopted a recent short form of PERVAL scale and a second order reflective conceptualization of value. Secondly, three alternative estimation methods were used and compared through bootstrapping and simulation procedures.