Bruce Treadmill Test in Children : First Normal Values for Children from Western Europe : P67

Introduction: One of the main goals for exereise testing in children is evaluation of exercise capacity. There are many testing protocols, but the Bruce treadmill protocol is widely used among pediatrie cardiology centers. Thirty years ago, Cuming et al. were the first to establish normal values for children from North America (Canada) aged 4 to 18 years old. No data was ever published for children from Western Europe. Our study aimed to assess the validity of the normal values from Cuming et al. for children from Western Europe in the 21 st century. Methods: It is a retrospective cohort study in a tertiary care children's hospital. 144 children referred to our institution but finally diagnosed as having a normal heart underwent exercise stress testing using the Bruce protocol between 1999 and 2006. Data from 59 girls and 85 boys aged 6 to 18 were reviewed. Mean endurance time (ET) for each age category and gender was compared with the mean normal values fram Cumming et al by an unpaired t-test. Results: Mean ET increases with age until 15 years old in girls and then decreases. Mean endurance time increases continuouslY'from 6 to 18 years old in boys. The increase is more pronounced in boys than girls. In our study, a significant higher mean ET was found for boys in age categories 10 to 12, 13 to 15 and 16 to 18. No significant difference was found in any other groups. Conclusions: Some normal values from Cuming et al. established in 1978 for ET with the Bruce protocol are probably not appropriate any more today for children from Western Europe. Our study showed that mean ET is higher for boys from 10 to 18 years old. Despite common beliefs, cardiovascular conditioning doesn't seem yet reduced in children from Western Europe. New data for Bruce treadmill exercise. testing for healthy children, 4 to 18 years old, living in Western Europe are required. .

Développement d'un Test Sérologique Contre le Virus de la Chorioméningite Lymphocytaire

Les Arenavirus sont une famille de virus à ARN très diversifiée avec plus de 23 espèces recensées dans le monde, divisées en deux Clades majeures (Emonet et al., 2009). Ils sont classifiés en Arenavirus du Nouveau Monde versus de l'Ancien Monde (Buchmeier, de la Torre, and Peters, 2007) (Fig. 1). Parmi les Arenavirus, sept sont connus pour être les agents causales de fièvres hémorragiques foudroyantes : Les virus Lassa, Junin, Machupo, Guanarito, Sabia, Chapare et Lujo. Les Arenavirus infectent, de façon spécifique, des espèces de rongeurs qui sont le réservoir naturel déterminant ainsi leur distribution géographique (Clegg, 2002). On retrouve le virus de la chorioméningite lymphocytaire (LCMV) à la fois en Europe et aux Amériques. Le rongeur infecté est le vecteur de transmission à l'Homme. Les maladies associées aux infections par les Arenavirus hémorragiques ont un haut taux de mortalité allant de 15 à 30% et sont à haut risque épidémiologique en raison de l'absence de vaccin et de traitement efficace. Pour ces raisons, ces Arenavirus sont classifiés comme pathogènes à haut risque par le centre pour le contrôle des maladies (CDC) (Borio et al., 2002).

The QUASAR reproducibility study, Part II: Results from a multi-center Arterial Spin Labeling test-retest study.

Arterial Spin Labeling (ASL) is a method to measure perfusion using magnetically labeled blood water as an endogenous tracer. Being fully non-invasive, this technique is attractive for longitudinal studies of cerebral blood flow in healthy and diseased individuals, or as a surrogate marker of metabolism. So far, ASL has been restricted mostly to specialist centers due to a generally low SNR of the method and potential issues with user-dependent analysis needed to obtain quantitative measurement of cerebral blood flow (CBF). Here, we evaluated a particular implementation of ASL (called Quantitative STAR labeling of Arterial Regions or QUASAR), a method providing user independent quantification of CBF in a large test-retest study across sites from around the world, dubbed "The QUASAR reproducibility study". Altogether, 28 sites located in Asia, Europe and North America participated and a total of 284 healthy volunteers were scanned. Minimal operator dependence was assured by using an automatic planning tool and its accuracy and potential usefulness in multi-center trials was evaluated as well. Accurate repositioning between sessions was achieved with the automatic planning tool showing mean displacements of 1.87+/-0.95 mm and rotations of 1.56+/-0.66 degrees . Mean gray matter CBF was 47.4+/-7.5 [ml/100 g/min] with a between-subject standard variation SD(b)=5.5 [ml/100 g/min] and a within-subject standard deviation SD(w)=4.7 [ml/100 g/min]. The corresponding repeatability was 13.0 [ml/100 g/min] and was found to be within the range of previous studies.

Optimal culture incubation time in orthopedic device-associated infections: a retrospective analysis of prolonged 14-day incubation.

Accurate diagnosis of orthopedic device-associated infections can be challenging. Culture of tissue biopsy specimens is often considered the gold standard; however, there is currently no consensus on the ideal incubation time for specimens. The aim of our study was to assess the yield of a 14-day incubation protocol for tissue biopsy specimens from revision surgery (joint replacements and internal fixation devices) in a general orthopedic and trauma surgery setting. Medical records were reviewed retrospectively in order to identify cases of infection according to predefined diagnostic criteria. From August 2009 to March 2012, 499 tissue biopsy specimens were sampled from 117 cases. In 70 cases (59.8%), at least one sample showed microbiological growth. Among them, 58 cases (82.9%) were considered infections and 12 cases (17.1%) were classified as contaminations. The median time to positivity in the cases of infection was 1 day (range, 1 to 10 days), compared to 6 days (range, 1 to 11 days) in the cases of contamination (P < 0.001). Fifty-six (96.6%) of the infection cases were diagnosed within 7 days of incubation. In conclusion, the results of our study show that the incubation of tissue biopsy specimens beyond 7 days is not productive in a general orthopedic and trauma surgery setting. Prolonged 14-day incubation might be of interest in particular situations, however, in which the prevalence of slow-growing microorganisms and anaerobes is higher.

Concrete Pavement Mixture Design and Analysis (MDA): Development and Evaluation of Vibrating Kelly Ball Test (VKelly Test) for the Workability of Concrete, 2015

Due to the low workability of slipform concrete mixtures, the science of rheology is not strictly applicable for such concrete. However, the concept of rheological behavior may still be considered useful. A novel workability test method (Vibrating Kelly Ball or VKelly test) that would quantitatively assess the responsiveness of a dry concrete mixture to vibration, as is desired of a mixture suitable for slipform paving, was developed and evaluated. The objectives of this test method are for it to be cost-effective, portable, and repeatable while reporting the suitability of a mixture for use in slipform paving. The work to evaluate and refine the test was conducted in three phases: 1. Assess whether the VKelly test can signal variations in laboratory mixtures with a range of materials and proportions 2. Run the VKelly test in the field at a number of construction sites 3. Validate the VKelly test results using the Box Test developed at Oklahoma State University for slipform paving concrete The data collected to date indicate that the VKelly test appears to be suitable for assessing a mixture’s response to vibration (workability) with a low multiple operator variability. A unique parameter, VKelly Index, is introduced and defined that seems to indicate that a mixture is suitable for slipform paving when it falls in the range of 0.8 to 1.2 in./√s.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures – Phase II, TR-658, 2015

To conserve natural resources and energy, the amount of recycled asphalt pavement has been steadily increasing in the construction of asphalt pavements. The objective of this study is to develop quality standards for inclusion of high RAP content. To determine if the higher percentage of RAP materials can be used on Iowa’s state highways, three test sections with target amounts of RAP materials of 30%, 35% and 40% by weight were constructed on Highway 6 in Iowa City. To meet Superpave mix design requirements for mixtures with high RAP contents, it was necessary to fractionate the RAP materials. Three test sections with actual RAP materials of 30.0%, 35.5% and 39.2% by weight were constructed and the average field densities from the cores were measured as 95.3%, 94.0%, and 94.3%, respectively. Field mixtures were compacted in the laboratory to evaluate moisture sensitivity using a Hamburg Wheel Tracking Device. After 20,000 passes, rut depths were less than 3mm for mixtures obtained from three test sections. The binder was extracted from the field mixtures from each test section and tested to identify the effects of RAP materials on the performance grade of the virgin binder. Based on Dynamic Shear Rheometer and Bending Beam Rheometer tests, the virgin binders (PG 64-28) from test sections with 30.0%, 35.5% and 39.2% RAP materials were stiffened to PG 76-22, PG 76-16, and PG 82-16, respectively. The Semi-Circular Bending (SCB) test was performed on laboratory compacted field mixtures with RAP amounts of 30.0%, 35.5% and 39.2% at two different temperatures of -18 and -30 °C. As the test temperature decreased, the fracture energy decreased and the stiffness increased. As the RAP amount increased, the stiffness increased and the fracture energy decreased. Finally, a condition survey of the test sections was conducted to evaluate their short-term pavement performance and the reflective transverse cracking did not increase as RAP amount was increased from 30.0% to 39.2%.

Teaching Motivational Interviewing to Medical Students to Improve Behavior Change Counseling Skills - Results of a Pilot Test

BACKGROUND: Patient behavior accounts for half or more of the variance in health, disease, mortality and treatment outcome and costs. Counseling using motivational interviewing (MI) effectively improves the substance use and medical compliance behavior of patients. Medical training should include substantial focus on this key issue of health promotion. The objective of the study is to test the efficacy of teaching MI to medical students. METHODS: Thirteen fourth-year medical students volunteered to participate. Seven days before and after an 8-hour interactive MI training workshop, each student performed a video-recorded interview with two standardized patients: a 60 year-old alcohol dependent female consulting a primary care physician for the first time about fatigue and depression symptoms; and a 50 year-old male cigarette smoker hospitalized for myocardial infarction. All 52 videos (13 students×2 interviews before and after training) were independently coded by two blinded clinicians using the Motivational Interviewing Training Integrity (MITI, 3.0). MITI scores consist of global spirit (Evocation, Collaboration, Autonomy/Support), global Empathy and Direction, and behavior count summary scores (% Open questions, Reflection to question ratio, % Complex reflections, % MI-adherent behaviors). A "beginning proficiency" threshold (BPT) is defined for each of these 9 scores. The proportion of students reaching BPT before and after training was compared using McNemar exact tests. Inter-rater reliability was evaluated by comparing double coding, and test-retest analyses were conducted on a sub-sample of 10 consecutive interviews by each coder. Weighted Kappas were used for global rating scales and intra-class correlations (ICC) were computed for behavior count summary scores. RESULTS: The percent of counselors reaching BPT before and after MI training increased significantly for Evocation (15% to 65%, p<.001), Collaboration (27% to 77%, p=.001), Autonomy/Support (15% to 54%, p=.006), and % Open questions (4% to 38%, p=.004). Proportions increased, but were not statistically significant for Empathy (38% to 58%, p=.18), Reflection to question ratio (0% to 15%, p=.12), % Complex reflection (35% to 54%, p=.23), and % MI-adherent behaviors (8% to 15%, p=.69). There was virtually no change for the Direction scale (92% to 88%, p=1.00). The reliability analyses produced mixed results. Weighted kappas for inter-rater reliability ranged from .14 for Direction to .51 for Collaboration, and from .27 for Direction to .80 for Empathy for test-retest. ICCs ranged from .20 for Complex reflections to .89 for Open questions (inter-rater), and from .67 for Complex reflections to .99 for Reflection to question ratio (test-retest). CONCLUSION: This pilot study indicates that a single 8-hour training in motivational interviewing for voluntary fourth-year medical students results in significant improvement of some MI skills. A larger sample of randomly selected medical students observed over longer periods should be studied to test if MI training generalizes to medical students. Inter-rater reliability and test-retest findings indicate a need for caution when interpreting the present results, as well as for more intensive training to help appropriately capture more dimensions of the process in future studies.

Concrete Pavement Mixture Design and Analysis (MDA): Evaluation of Foam Drainage Test to Measure Air Void Stability in Concrete

The stability of air bubbles in fresh concrete can have a profound influence of the potential durability of the system, because excessive losses during placement and consolidation can compromise the ability of the mixture to resist freezing and thawing. The stability of air void systems developed by some air entraining admixtures (AEAs) could be affected by the presence of some polycarboxylate-based water reducing admixtures (WRAs). The foam drainage test provides a means of measuring the potential stability of air bubbles in a paste. A barrier to acceptance of the test was that there was little investigation of the correlation with field performance. The work reported here was a limited exercise seeking to observe the stability of a range of currently available AEA/WRA combinations in the foam drainage test; then, to take the best and the worst and observe their stabilities on concrete mixtures in the lab. Based on the data collected, the foam drainage test appears to identify stable combinations of AEA and WRA.

Concrete Pavement Mixture Design and Analysis (MDA): Evaluation of the Fresh and Hardened Properties of Concrete Mixtures Containing Permeability-Reducing Admixtures to Develop Standard Test Protocol, 2014

Concrete durability may be considered as the ability to maintain serviceability over the design life without significant deterioration, and is generally a direct function of the mixture permeability. Therefore, reducing permeability will improve the potential durability of a given mixture and, in turn, improve the serviceability and longevity of the structure. Given the importance of this property, engineers often look for methods that can decrease permeability. One approach is to add chemical compounds known as integral waterproofing admixtures or permeability-reducing admixtures, which help fill and block capillary pores in the paste. Currently, there are no standard approaches to evaluate the effectiveness of permeability-reducing admixtures or to compare different products in the US. A review of manufacturers’ data sheets shows that a wide range of test methods have been used, and rarely are the same tests used on more than one product. This study investigated the fresh and hardened properties of mixtures containing commercially available hydrophilic and hydrophobic types of permeability-reducing admixtures. The aim was to develop a standard test protocol that would help owners, engineers, and specifiers compare different products and to evaluate their effects on concrete mixtures that may be exposed to hydrostatic or non-hydrostatic pressure. In this experimental program, 11 concrete mixtures were prepared with a fixed water-to-cement ratio and cement content. One plain mixture was prepared as a reference, 5 mixtures were prepared using the recommended dosage of the different permeability-reducing admixtures, and 5 mixtures were prepared using double the recommended dosage. Slump, air content, setting time, compressive and flexural strength, shrinkage, and durability indicating tests including electrical resistivity, rapid chloride penetration, air permeability, permeable voids, and sorptivity tests were conducted at various ages. The data are presented and recommendations for a testing protocol are provided.

Wear of two denture teeth materials in vivo-2-year results.

OBJECTIVE: (1) To quantify wear of two different denture tooth materials in vivo with two study designs, (2) to relate tooth variables to vertical loss. METHODS: Two different denture tooth materials had been used (experimental material=test; DCL=control). In study 1 (split-mouth, 6 test centers) 60 subjects received complete dentures, in study 2 (two-arm, 1 test center) 29 subjects. In study 1 the mandibular dentures were supported by implants in 33% of the subjects, in study 2 only in 3% of the subjects. Impressions of the dentures were taken and poured with improved stone at baseline and after 6, 12, 18 and 24 months. Each operator evaluated the wear subjectively. Wear analysis was carried out with a laser scanning device. Maximal vertical loss of the attrition zones was calculated for each tooth cusp and tooth. A mixed linear model was used to statistically analyse the logarithmically transformed wear data. RESULTS: Due to drop-outs and unmatchable casts, only 47 subjects of study 1 and 14 of study 2 completed the 2-year recall. Overall, 75% of all teeth present could be analysed. There was no statistically difference in the overall wear between the test and control material for either study 1 or study 2. The relative increase in wear over time was similar in both study designs. However, a strong subject effect and center effect were observed. The fixed factors included in the model (time, tooth, center, etc.) accounted for 43% of the variability, whereas the random subject effect accounted for another 30% of the variability, leaving about 28% of unexplained variability. More wear was consistently recorded in the maxillary teeth compared to the mandibular teeth and in the first molar teeth compared to the premolar teeth and the second molars. Likewise, the supporting cusps showed more wear than the non-supporting cusps. The amount of wear did not depend on whether or not the lower dentures were supported by implants. The subjective wear was correct in about 67% of the cases if it is postulated that a wear difference of 100μm should be subjectively detectable. SIGNIFICANCE: The clinical wear of denture teeth is highly variable with a strong patient effect. More wear can be expected in maxillary denture teeth compared to mandibular teeth, first molars compared to premolars and supported cusps compared to non-supported cusps. Laboratory data on the wear of denture tooth materials may not be confirmed in well-structured clinical trials probably due to the large inter-individual variability.

The effect of a period of intensive exercise on the isoform test to detect growth hormone doping in sports.

OBJECTIVE: The major objective of this study was to investigate the effects of several days of intense exercise on growth hormone (hGH) testing using the World Anti-Doping Agencies hGH isoform differential immunoassays. Additionally the effects of circadian variation and exercise type on the isoform ratios were also investigated. STUDY DESIGN: 15 male athletes performed a simulated nine day cycling stage race. Blood samples were collected twice daily over a period of 15days (stage race+three days before and after). hGH isoforms were analysed by the official WADA immunoassays (CMZ Assay GmbH). RESULTS: All measured isoform ratios were far below the WADA decision limits for an adverse analytical finding. Changes in the isoform ratios could not be clearly connected to circadian variation, exercise duration or intensity. CONCLUSIONS: The present study demonstrates that the hGH isoform ratios are not significantly affected by exercise or circadian variation. We demonstrated that heavy, long term exercise does not interfere with the decision limits for an adverse analytical finding.

Investigation of the Lane-Wells Road Logger, HR-113, 1966

The Lane-Wells Road Logger was utilized primarily to determine the feasibility of employing such a device for moisture and density control in Iowa highway construction. A secondary objective was the use of the Road Logger to obtain information concerning moisture content and density during and after construction. Correlation studies with conventional test results required a small portion of the lease period. Practically all phases of construction and most materials utilized in base and surface courses were surveyed. Results of this study were good, in general, with the Road Logger indicating dry density slightly higher and the moisture content slightly lower than conventional results in most instances. Economic feasibility seemed to pose the greatest problem for the acceptance of the Road Logger as a standard compaction control device. It would appear from the findings of this study that probably only large projects, or several smaller contracts tested simultaneously, could justify the expense of the Logger. A total of about 128 miles were surveyed with the Logger during the lease period. Approximately 16 days of downtime due to minor breakdowns were recorded. Inclement weather forcing construction delays resulted in several idle days in which the Logger's full capabilities were not realized.

Evaluation of a Mobile Rut Depth Device for the Pavement Management Program, HR-248, 1984

With inflation, there is no longer a completely adequate budget for highway construction and maintenance. Restricted budgets have generated development and implementation of pavement management programs. A need for management guidelines generated National Cooperative Highway Research Program Synthesis of Highway Practice 84, "Evaluation Criteria and Priority Setting for State Highway Programs". Traffic volumes and present conditions are two major factors in determining the priority of a proposed highway improvement. The Iowa DOT, Highway Division, Office of Materials has been conducting pavement condition inventory surveys on a three-year frequency since 1969 as input for pavement management. Development of substantial wheel rutting on paved roadways results in a potential hazard to highway safety. During periods of rain, these water-filled ruts may cause hydroplaning and loss of vehicle control. It is, therefore, imparitive that Iowa roadways be continually monitored for rut depths and further that this data be used in a pavement management program to determine priorities for rehabilitation or resurfacing.