UK epidemic strains of meticillin-resistant Staphylococcus aureus in clinical samples from Malta

Since 1999, the European Antimicrobial Resistance Surveillance System (EARSS) has monitored the rise in infection due to a number of organisms, including meticillin-resistant Staphylococcus aureus (MRSA). The EARSS reported that MRSA infections within intensive care units account for 25-50% of infections in many central and southern European countries, these included France, Spain, Great Britain, Malta, Greece and Italy. Each country has defined epidemic MRSA (EMRSA) strains; however, the method of spread of these strains from one country to another is unknown. In this current study, DNA profiles of 473 isolates of MRSA collected from the UK and Malta were determined by PFGE. Analysis of the data showed that two countries separated by a large geographical distance had a similar DNA profile pattern. Additionally it was demonstrated that strains of EMRSA normally found in the UK were also found in the Maltese cohort (EMRSA 15 and 16). A distinct DNA profile was found in the Maltese cohort, which may be a local EMRSA, and accounted for 14.4% of all Maltese isolates. The appearance of the same MRSA and EMRSA profiles in two separate countries suggests that MRSA can be transferred out of their country of origin and potentially establish in a new locality or country.

Characterisation of Aeromonas strains and species by pulsed field gel electrophoresis and principal components analysis

Aeromonas genomes were investigated by restriction digesting chromosomal DNA with the endonuclease XbaI, separation of restriction fragments by pulsed field gel electrophoresis (PFGE) and principal components analysis (PCA) of resulting separation patterns. A. salmonicida salmonicida were unique amongst the isolates investigated. Separation profiles of these isolates were similar and all characterised by a distinct absence of bands in the 250kb region. Principal components analysis represented these strains as a clearly defined homogeneous group separated by insignificant Euclidian distances. However, A. salmonicida achromogenes isolates in common with those of A. hydrophila and A. sobria were shown by principal components analysis to be more heterogeneous in nature. Fragments from these isolates were more uniform in size distribution but as demonstrated by the Euclidian distances attained through PCA potentially characteristic of each strain. Furthermore passaging of Aeromonas isolates through an appropriate host did not greatly modify fragment separation profiles, indicative of the genomic stability of test aeromonads and the potential of restriction digesting/PFGE/PCA in Aeromonas typing.

Work stressors, strains and hospital unit performance

Hospital employees who work in an environment with zero tolerance to error, face several stressors that may result in psychological, physiological, and behavioural strains, and subsequently, in suboptimal performance. This thesis includes two studies which investigate the stressor-to-strain-to-performance relationships in hospitals. The first study is a cross-sectional, multi-group investigation based on secondary data from 65,142 respondents in 172 acute/specialist UK NHS trusts. This model proposes that senior management leadership predicts social support and job design which, in turn, moderate stressors-to-strains across team structure. The results confirm the model's robustness. Regression analysis provides support for main effects and minimal support for moderation hypotheses. Therefore, based on its conclusions and inherent limitations, study one lays the framework for study two. The second study is a cross-sectional, multilevel investigation of the strain-reducing effects of social environment on externally-rated unit-level performance based on primary data from 1,137 employees in 136 units, in a hospital in Malta. The term "social environment" refers to the prediction of the moderator variables, which is to say, social support and decision latitude/control, by transformational leadership and team climate across hospital units. This study demonstrates that transformational leadership is positively associated with social support, whereas team climate is positively associated with both moderators. At the same time, it identifies a number of moderating effects which social support and decision latitude/control, both separately and together, had on specific stressor-to-strain relationships. The results show significant mediated stressor-to-strain-to-performance relationships. Furthermore, at the higher level, unit-level performance is positively associated with shared unit-level team climate and with unit-level vision, the latter being one of the five sub-dimension of transformational leadership. At the same time, performance is also positively related to both transformational leadership and team climate when the two constructs are tested together. Few studies have linked the buffering effects of the social environment in occupational stress with performance. Therefore, this research strives to make a significant contribution to the occupational stress and performance literature with a focus on hospital practice. Indeed, the study highlights the wide-ranging and far-reaching implications that these findings provide for theory, management, and practice.

The influence of non-metallic inclusions upon the properties of linepipe steels

The principal aim of this work was to determine the role of non-metallic inclusions in the process of hydrogen stepwise cracking (SWC). Additionally, the influence of inclusions upon the notch ductility of hydrogen charged (HC) and uncharged (UN) tensile specimens was examined. To obtain a basis for experiment a series of low carbon-manganese steels were prepared by induction melting. In order to produce variations in the composition, morphology, volume fraction, size and distribution of the inclusions the steel chemistry was adjusted prior to casting by additions of deoxidiser and Ca-Si injection. Sections of each ingot were hot rolled. Metallography, image analysis, mechanical tests and hydrogen SWC tests were then carried out. The volume fraction, morphology, and shape of inclusions influenced the tensile ductility of the steels. Marked anisotropy was found in the steels containing type II MnS inclusions at all rolling temperatures, whereas the fully Ca treated steel was isotropic. It was found that several inclusion parameters (projected length PL, mean free distance MFD, nearest-neighbour distance NND) correlated with fracture strain. An increase in inclusion volume fraction and/or the dimension of inclusions on a plane parallel to the plane of fracture led to a decrease in fracture strain. The inclusion parameters did not correlate with the fracture strains for the HC tensile specimens. However, large or clusters of inclusions acted as the principal sites for crack initiation. `Fisheyes' or areas of `flat' fracture were often found on these fracture surfaces. The criteria for SWC initiation was found to be either large inclusions or clusters of inclusions. As the PL of inclusions increased the probability of large SWCs occurring increased. SWC initiation at inclusions was believed to occur at a critical concentration of hydrogen. Factors which assisted the concentration of hydrogen at inclusions were discussed. None of the proposed mechanisms of hydrogen embrittlement could be identified as the single cause of SWC.

The mechanical properties and formability of dual-phase steel

In recent years dual phase steels comprising of 5-20% martensite in a ferrite matrix have come into the limelight of high strength cold formable steels because of their potential for vehicle weight saving. They show the following features: no yield point; relatively low initial flow stress; high initial workhardening rate; well sustained work hardening. As a consequence of these characteristics, dual phase steels exhibit a better combination of strength and elongation than other HSLA steels. In this thesis, a broad view of the factors which influence their properties is presented. Mechanical properties and forming ability of a commercially available dual phase steel and an AL-Si killed steel processed to dual phase form are investigated to ascertain the effect of their microstructure on their properties. It is found that the yield phenomena are masked by the transformation induced stresses present during processing and so yield point could be recovered under suitable ageing treatment; that apart from giving the above properties dual phasing gives rise to very low strain-rate sensitivity and a low R value ~ 1; that the mechanical response under rolling conditions is not different from those under tension; that there is a danger of damage to tooling during forming operations of these steels if fracture should precede instability as a result of grain size dependent strength found for these steels. It is also found that very little deformation of the martensite islands took place during deformation except at high strains. The work-hardening and the strength levels can be controlled by either decreasing the grain size or increasing the martensite volume fraction, but it is found that increasing martensite has a detrimental effect on ductility and the ductility and fracture strength can be controlled better by refining the grain size. A remarkable effect found in the dual phase steel tested is that the compressive strength is higher than the tensile strength. The reason for this observation is not yet clear but it is suggested that it might be due to the introduction of emissary type dislocations into the ferrite lattice as a result of twins formed in the martensite during transformation from austenite. The twins are envisaged to be {111} <112> in character.

Formability of high strength aluminium sheet

An initial review of the subject emphasises the need for improved fuel efficiency in vehicles and the possible role of aluminium in reducing weight. The problems of formability generally in manufacture and of aluminium in particular are discussed in the light of published data. A range of thirteen commercially available sheet aluminium alloys have been compared with respect to mechanical properties as these affect forming processes and behaviour in service. Four alloys were selected for detailed comparison. The formability and strength of these were investigated in terms of underlying mechanisms of deformation as well as the microstructural characteristics of the alloys including texture, particle dispersion, grain size and composition. In overall terms, good combinations of strength and ductility are achievable with alloys of the 2xxx and 6xxx series. Some specific alloys are notably better than others. The strength of formed components is affected by paint baking in the final stages of manufacture. Generally, alloys of the 6xxx family are strengthened while 2xxx and 5xxx become weaker. Some anomalous behaviour exists, however. Work hardening of these alloys appears to show rather abrupt decreases over certain strain ranges which is probably responsible for the relatively low strains at which both diffuse and local necking occur. Using data obtained from extended range tensile tests, the strain distribution in more complex shapes can be successfully modelled using finite element methods.Sheet failure during forming occurs by abrupt shear fracture in many instances. This condition is favoured by states of biaxial tension, surface defects in the form of fine scratches and certain types of crystallographic texture. The measured limit strains of the materials can be understood on the basis of attainment of a critical shear stress for fracture.

Classification of bacterial strains based on DNA profiles

The analysis of bacterial genomes for epidemiological purposes often results in the production of a banding profile of DNA fragments characteristic of the genome under investigation. These may be produced using various methods, many of which involve the cutting or amplification of DNA into defined and reproducible characteristic fragments. It is frequently of interest to enquire whether the bacterial isolates are naturally classifiable into distinct groups based on their DNA profiles. A major problem with this approach is whether classification or clustering of the data is even appropriate. It is always possible to classify such data but it does not follow that the strains they represent are ‘actually’ classifiable into well-defined separate parts. Hence, the act of classification does not in itself answer the question: do the strains consist of a number of different distinct groups or species or do they merge imperceptibly into one another because DNA profiles vary continuously? Nevertheless, we may still wish to classify the data for ‘convenience’ even though strains may vary continuously, and such a classification has been called a ‘dissection’. This Statnote discusses the use of classificatory methods in analyzing the DNA profiles from a sample of bacterial isolates.

Preferred orientation in 18/10, 18/12 and 18/14 chromium/nickel steels and its relation to tensile and press forming properties

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Tensile properties of as fabricated, aged, and stretched SiC whisker and particle reinforced 2009 aluminium alloy

Tensile tests were carried out using specimens of 2009 aluminium alloy reinforced by either SiC whiskers or particles. The size distributions of the whiskers and particles in the matrix were obtained by image analysis. It was found that failure was a result of uniform void nucleation and coalescence in the as fabricated composites, or a result of fast crack propagation initiated by a flaw developed at clusters of SiC in the aged or stretched and aged composites. The strengths of the as fabricated composites were estimated based on the results of image analysis using continuum mechanics and dislocation theories. The estimation indicated that the tensile strengths are largely contributed to by composite strengthening, supplemented by residual dislocation strengthening and work hardening. Owing to the flaw controlled failure, the tensile strengths of the aged or stretched and aged composites were independent of aging time, aging temperature, and the amount of stretching. The elastic moduli of the composites were estimated using the Halpin-Tsai model and a good correlation was found between the measured and estimated moduli. © 1996 The Institute of Materials.

Effect of thermal and mechanical processing on tensile properties of powder formed 2124 aluminium and 2124 Al-SiC p metal matrix composite

The aging responses of 2124 Al-SiC p metal matrix composite (MMC) and unreinforced matrix alloy are studied and related to variations in tensile properties. The MMC is aged from Wo starting conditions: (i) stretched and naturally aged and (ii) re-solution treated. Accelerated aging occurs in both MMC conditions compared with unreinforced alloy. Tensile strengths and elastic moduli are improved in the MMC compared with the alloy, but ductility is reduced. Stretched MMC exhibits higher strength but lower ductility and modulus than re-solutioned MMC. The re-solutioned MMC fails by microvoid coalescence in low aging conditions, and by void nucleation and shear in high aging conditions. Failure of the stretched MMC initiates at the surface at specimen shoulders, illustrating the increased notch sensitivity of this condition, and propagates via a zigzag shear fracture mode. Zigzag facet size increases on gross aging. Particle fracture occurs during tensile failure, but also before testing as a result of the manufacturing process. © 1995 The Institute of Materials.

Microarray analysis of expression of cell death-associated genes in spinal cord cells with cyclic tensile strain

Previous studies have described alterations in gene expression following spinal cord injury, but this response to mechanical stimuli is difficult to investigate in vivo. Therefore, we have investigated the effect of cyclic tensile strain on cultured spinal cord cells from E15 Sprague-Dawley rats. Microarray analysis of gene expression and categorization of identified genes were performed using Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) systems. The application of cyclic tensile strain reduced the viability of cultured spinal cord cells significantly in a dose- and time-dependent manner. GO analysis identified candidate genes related to apoptosis (44) and to response to stimulus (17). KEGG analysis identified changes in the expression levels of 12 genes of the mitogen-activated protein kinase (MAPK) signaling pathway, which were confirmed to be upregulated and validated by RT-PCR analysis. Spinal cord cells undergo cell death in response to cyclic tensile strain, which were dose- and time-dependent, with upregulation of various genes, in particular of the MAPK pathway.

Study of effect on tensile stress test from distortion of fibre laser welded Ti6Al4V using FEA

Distortion is one type of defect in the weld, which is troublesome for some reasons, especially in thin plate welding. Distortion was found in fibre laser welding processing for 0.7mm thickness Ti6Al4V plate. The purpose of this paper is to understand and evaluate the effect of distortion on stress level by FEA and tensile test. A group of 0.7mm Ti6Al4V plates welded using continuous wave fibre laser. FEA models were established for fibre laser welded Ti6Al4V in abaqus 6.7. © (2011) Trans Tech Publications.

Agrobacterium vitis strains lack tumorigenic ability on in vitro grown grapevine stem segments

Grapevine stem segments were cocultivated with three different Agrobacterium tumefaciens and three different A. vitis strains. A. tumefaciens strains induced tumors at variable frequencies, while A. vitis-infected stem segments never formed crown galls. The tumorous nature of tissues grown on hormone free medium was confirmed by opine assays. Bioinformatic and PCR analysis of the virulence regions of various A. tumefaciens and A. vitis Ti plasmids showed that virH2 and virK genes are common in A. tumefaciens but they are lacking from A. vitis. Thus virH2 and virK genes may be essential for grapevine stem segment transformation, but expression of certain T-DNA genes of A. vitis may also prevent the growth of transformed cells. Our data indicate that the tumorigenic ability of A. vitis is different on intact plant and on their explants, and that the specific host association of A. vitis on grapevine is probably determined by physiological and biochemical factors (e. g., better colonizing ability) rather than by its increased tumorigenic ability. Therefore it is not reasonable to develop „helper” plasmids for grapevine transformation from A. vitis pTis, unless their avirulence on in vitro explants is determined by T-DNA gene(s). Due to the inability of A. vitis to induce tumors on grapevine stem segments, the use of in vitro explant assays cannot be reliably used to select A. vitis resistant grapevine genotypes or transgenic lines.

Serial evolutionary networks of within-patient HIV-1 sequences reveal patterns of evolution of X4 strains

Background The HIV virus is known for its ability to exploit numerous genetic and evolutionary mechanisms to ensure its proliferation, among them, high replication, mutation and recombination rates. Sliding MinPD, a recently introduced computational method [1], was used to investigate the patterns of evolution of serially-sampled HIV-1 sequence data from eight patients with a special focus on the emergence of X4 strains. Unlike other phylogenetic methods, Sliding MinPD combines distance-based inference with a nonparametric bootstrap procedure and automated recombination detection to reconstruct the evolutionary history of longitudinal sequence data. We present serial evolutionary networks as a longitudinal representation of the mutational pathways of a viral population in a within-host environment. The longitudinal representation of the evolutionary networks was complemented with charts of clinical markers to facilitate correlation analysis between pertinent clinical information and the evolutionary relationships. Results Analysis based on the predicted networks suggests the following:: significantly stronger recombination signals (p = 0.003) for the inferred ancestors of the X4 strains, recombination events between different lineages and recombination events between putative reservoir virus and those from a later population, an early star-like topology observed for four of the patients who died of AIDS. A significantly higher number of recombinants were predicted at sampling points that corresponded to peaks in the viral load levels (p = 0.0042). Conclusion Our results indicate that serial evolutionary networks of HIV sequences enable systematic statistical analysis of the implicit relations embedded in the topology of the structure and can greatly facilitate identification of patterns of evolution that can lead to specific hypotheses and new insights. The conclusions of applying our method to empirical HIV data support the conventional wisdom of the new generation HIV treatments, that in order to keep the virus in check, viral loads need to be suppressed to almost undetectable levels.