920 resultados para skin barrier
Resumo:
A leishmaniose visceral canina (LVC) é reconhecida pelas características clínicas da doença e é altamente letal. A infecção, entretanto, pode ser totalmente assintomática em alguns cães soropositivos, o que tem levantado questão polêmica sobre a possibilidade desses animais, serem ou não uma fonte importante da infecção para o flebotomíneo, Lutzomyia longipalpis, o principal vetor da leishmaniose visceral americana (LVA). Neste estudo foram examinados 51 cães com LVC aguda, provenientes de área endêmica de LVA no Estado do Pará, Brasil, e a carga parasitária, formas amastigotas de, na pele, linfonodo poplíteo e vísceras (fígado e baço) foi comparada com a de nove cães assintomáticos soropositivos (IFAT-IgG). Fragmentos de biópsia desses tecidos obtidos post-mortem foram processados para análise através de imunohistoquímica, usando um anticorpo policlonal contra Leishmania sp. Os testes do Qui-quadrado (X2) e Mann Whitney foram usados para avaliar as médias da densidade de macrófagos infectados (p < 0,05). Os resultados mostraram que não houve diferença (p > 0,05) na densidade de macrófagos infectados da pele (10,7/mm2 x 15,5/mm2) e do linfonodo (6,3/mm2 x 8,3/mm2) entre cães assintomáticos e sintomáticos. Entretanto, a densidade de macrófagos infectados da víscera de cães sintomáticos (5,3/mm2) foi maior (p < 0,05) que a de cães assintomáticos (1,4/mm2). Estes resultados sugerem, fortemente, que cães naturalmente infectados por L. (L.) i. chagasi, assintomáticos ou sintomáticos, podem servir como fonte de infecção, principalmente, considerando-se que a densidade de macrófagos infectados da pele (10,7/mm2 x 15,5/mm2), local onde o flebotomíneo vetor Lu. longipalpis realiza a hematofagia, foi maior (p < 0,05) que as do linfonodo (6,3/mm2 x 8.3/mm2) e vísceras (1,4/mm2x 5,3/mm2).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Generally most plastic materials are intrinsically hydrophobic, low surface energy materials, and thus do not adhere well to other substances. Surface treatment of polymers by discharge plasmas is of great and increasing industrial application because it can uniformly modify the surface of sample without changing the material bulk properties and is environmentally friendly. The plasma processes that can be conducted under ambient pressure and temperature conditions have attracted special attention because of their easy implementation in industrial processing. Present work deals with surface modification of polycarbonate (PC) by a dielectric barrier discharge (DBD) at atmospheric pressure. The treatment was performed in a parallel plate reactor driven by a 60Hz power supply. The DBD plasmas at atmospheric pressure were generated in air and nitrogen. Material characterization was carried out by contact angle measurements, and X-ray photoelectron spectroscopy (XPS). The surface energy of the polymer surface was calculated from contact angle data by Owens-Wendt method using distilled water and diiodomethane as test liquids. The plasma-induced chemical modifications are associated with incorporation of polar oxygen and nitrogen containing groups on the polymer surface. Due to these surface modifications the DBD-treated polymers become more hydrophilic. Aging behavior of the treated samples revealed that the polymer surfaces were prone to hydrophobic recovery although they did not completely recover their original wetting properties.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Plasma polymer films are very attractive for industrial applications in several sectors such as in the electronic, mechanic, biomedic, coating and others, due to its good adhesion, being insoluble in mild acids and bases and having a high crosslinking structure. This work reports the physical, structural, and surface properties of the polymer obtained from an acetylene plasma polymerization technique and treated by dielectric barrier discharge (DBD). The film was deposited in a reactor supplied by a radio-frequency power source at low pressure. After deposition, the nanofilms were treated in a DBD plasma reactor operating in air. The treatment times varied from 1 to 5 min. The analysis of molecular structure of the samples was investigated by FTIR spectroscopy, showing absorption bands in 3480, 2930, 1720, 1450 and 1380 cm(-1). The water contact-angle was investigated by goniometric technique and presented values from 5 to 65 degrees. The aging effect of these films was also studied. The alteration in the films surface morphology was assessed by an atomic force microscopy (AFM) which indicated that the roughness increased from 60 nm to 160 nm as a result of the DBD treatment. The refractive index of the samples presented values near 1.7, measured by UV-Visible spectroscopy. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Community acquired methicillin Staphylococcus aureus (CA-MRSA) was first reported in 1981, infecting people without risk factors. These strains harbor the Staphylococcal Cassette Chromosome mec (SCCmec) type IV, which contains the mecA gene codifying for methicillin resistance. CA-MRSA strains usually carry PVL (Panton-Valentine Leukocidin), a virulence factor responsible for tissue invasion, causing systemic infections and leading to serious complications. The aims of this work were to detect the mecA gene, SCCmec characterization and to detect the PVL gene of the S. aureus strains isolated from patients diagnosed with skin and soft tissue infections attending the Dermatology Service, of the Botucatu Medical School, Brazil. Among 127 collected samples, 66 (51.9%) were S. aureus and, from these, 7 (10.6%) harbored mecA gene, 3 (42%) with cassette type IV, and none of these samples carried the PVL gene, but it was detected in 10 (15.1%) samples of S. aureus methicillin sensitive (MSSA). Our study suggests the S. aureus strains that harbor PVL gene and MRSA are present in the community as important pathogens.
Resumo:
Purpose. Evaluated the effects of continuous electrical current (CEC) or zinc administrated by transdermal iontophoresis (Zn+TDI). Methods. 120 male Wistar rats were submitted to an incision surgery at the anterior region of abdomen and distributed into 6 experimental groups with 40 animals: 3 diabetic groups and 3 normal groups, untreated and treated with CEC alone or with Zn+TDI. Each group was further divided into 4 subgroups with 10 rats each to be evaluated on the 4th, 7th, 14th, and 21st day after surgery. In each period, clinical and laboratory parameters from the animals were analyzed. Results. The analysis by optical and scanning electron microscopy showed a delay in the phases of wound healing in diabetic rats without treatment in all periods of the experiment; breaking strength (BS) was significantly reduced in skin scars of untreated diabetic rats when compared to other groups. In contrast, BS in skin scars of nondiabetic groups and diabetic rats treated with Zn+TDI showed significant increase in those, besides not presenting delayed healing. Conclusion. Electrical stimulation of surgical wounds used alone or in association with zinc by TDI is able to consistently improve the morphological and ultrastructural changes observed in the healing of diabetic animals.
Resumo:
The increase in aquaculture global fish production has been associated with an increase in infectious diseases affecting aquacultured species.. The aim of this study was to identify ulcers in pacu (Piaractus mesopotamicus) with sodium fluorescein before it was possible to observe them visually. Twenty one fish with no apparent skin lesions were divided into three groups. Group 1 were injected with saline 0.65% (Group 1), Group 2 with 6 x 10(8) CFU of Aeromonas hydrophila and group 3 with 6 x 10(8) CFU of Streptococcus agalactiae into the peritoneal cavity. All animals showed a positive reaction to fluorescein. A. hydrophila infected fish presented with large round marks with irregular borders, the characteristic ulcers caused by this agent. However, the other groups only displayed markings associated with handling caused by the netting procedures. We concluded that sodium fluorescein may be useful for an early and fast evaluation of cutaneous infection of A. hydrophila in pacu.