Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper proposes the development of biologically inspired robots as the capstone project of the European Project Semester (EPS) framework. EPS is a one semester student centred international programme offered by a group of European engineering schools (EPS Providers) as part of their student exchange programme portfolio. EPS is organized around a central module (the EPS project) and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the socalled real world, in opposition to the academic world. Students are organized in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS provides an integrated framework for undertaking capstone projects, which is focused on multicultural and multidisciplinary teamwork, communication, problem-solving, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. The design and development of biologically inspired robots allows the students to fulfil the previously described requirements and objectives and, as a result, we recommend the adoption of these projects within the EPS project capstone module for the benefit of engineering students.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Development of paper-based color test-strip for drug detection in aquatic environment: Application to oxytetracycline

The wide use of antibiotics in aquaculture has led to the emergence of resistant microbial species. It should be avoided/minimized by controlling the amount of drug employed in fish farming. For this purpose, the present work proposes test-strip papers aiming at the detection/semi-quantitative determination of organic drugs by visual comparison of color changes, in a similar analytical procedure to that of pH monitoring by universal pH paper. This is done by establishing suitable chemical changes upon cellulose, attributing the paper the ability to react with the organic drug and to produce a color change. Quantitative data is also enabled by taking a picture and applying a suitable mathematical treatment to the color coordinates given by the HSL system used by windows. As proof of concept, this approach was applied to oxytetracycline (OXY), one of the antibiotics frequently used in aquaculture. A bottom-up modification of paper was established, starting by the reaction of the glucose moieties on the paper with 3-triethoxysilylpropylamine (APTES). The so-formed amine layer allowed binding to a metal ion by coordination chemistry, while the metal ion reacted after with the drug to produce a colored compound. The most suitable metals to carry out such modification were selected by bulk studies, and the several stages of the paper modification were optimized to produce an intense color change against the concentration of the drug. The paper strips were applied to the analysis of spiked environmental water, allowing a quantitative determination for OXY concentrations as low as 30 ng/mL. In general, this work provided a simple, method to screen and discriminate tetracycline drugs, in aquaculture, being a promising tool for local, quick and cheap monitoring of drugs.

Development of electrochemical nitrite biosensors using cytochrome c nitrite reductase from Desulfovibrio desulfuricans ATCC 27774

Dissertação apresentada para a obtenção do Grau de Doutor em Química Sustentável pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Chromatin dynamics in Arbidopsis development: a live cell imaging approach

Dissertation presented to obtain the Ph.D degree in Biology

Molecular modulation of brain development and function: lessons from “old” and “new”

Dissertation presented to obtain the Ph.D degree in Biology

The CONCERTO methodology for model-based development of avionics SW

20th International Conference on Reliable Software Technologies - Ada-Europe 2015 (Ada-Europe 2015), 22 to 26, Jun, 2015, Madrid, Spain.

Towards the Development of XDense, A Sensor Network for Dense Sensing

Poster in 12th European Conference on Wireless Sensor Networks (EWSN 2015). 9 to 11, Feb, 2015, pp 24-25. Porto, Portugal.

Psychosocial Morbidity and its Correlates in Cancer Patients of the Mediterranean Area: Findings from the Southern European Psycho-Oncology Study

BACKGROUND: A few and partial data are available on psychosocial morbidity among cancer patients in Mediterranean countries. As a part of a more general investigation (Southern European Psycho-Oncology Study-SEPOS), the rate of psychosocial morbidity and its correlation with clinical and cultural variables were examined in cancer patients in Italy, Portugal and Spain. METHODS: A convenience sample of cancer outpatients with good performance status and no cognitive impairment were approached. The Hospital Anxiety-Depression scale (HAD-S), the Mini-Mental Adjustment to Cancer scale (Mini-MAC), and the Cancer Worries Inventory (CWI) were used to measure psychological morbidity, coping strategies and concerns about illness. RESULTS: Of 277 patients, 34% had pathological scores ("borderline cases" plus "true cases") on HAD-S Anxiety and 24.9% on HAD-S Depression. Total psychiatric "caseness" was 28.5% and 16.6%, according to different HAD cut-offs (14 and 19, respectively). Significant relationships of HAD-S Anxiety, HAD-S Depression, HAD-S Total score, with Mini-MAC Hopeless and Anxious Preoccupation, and CWI score were found. No differences emerged between countries on psychosocial morbidity, while some differences emerged between the countries on coping mechanisms. Furthermore, Fatalism, Avoidance and marginally Hopeless were higher compared to studies carried out in English-speaking countries. LIMITATIONS: The relatively small sample size and the good performance status prevent us to generalize data on patients with different cancer sites and advanced phase of illness. CONCLUSIONS: One-third of the patients presented anxiety and depressive morbidity, with significant differences in characteristics of coping in Mediterranean countries in comparison with English-speaking countries.

Use of Distress and Depression Thermometers to Measure Psychosocial Morbidity Among Southern European Cancer Patients

GOALS OF WORK: Recent literature has indicated the need for rapid evaluation of psychosocial issues secondary to cancer. Because of the problems of routine use of psychometric instruments, short instruments such as visual analogue scales or one-item 0-10 scales have been developed as valid assessment alternatives. PATIENTS AND METHODS: A study was conducted to examine the role of two 0-10 scales in measuring emotional stress (distress thermometer, DT) and depressed mood (mood thermometer, MT), respectively, in a multicenter study carried out in southern European countries (Italy, Portugal, Spain, and Switzerland). A convenience sample of 312 cancer outpatients completed the DT and MT and the Hospital Anxiety Depression Scale (HADS). MAIN RESULTS: DT was more significantly associated HADS anxiety than HADS depression while MT was related both to HADS anxiety and depression. The correlation of MT with HADS was higher than DT. A cutoff point >4 on the DT maximized sensitivity (65%) and specificity (79%) for general psychosocial morbidity while a cutoff >5 identified more severe "caseness" (sensitivity=70%; specificity=73%). On the MT, sensitivity and specificity for general psychosocial morbidity were 85% and 72% by using the cutoff score >3. A score >4 on the MT was associated with a sensitivity of 78% and a specificity of 77% in detecting more severe caseness. CONCLUSIONS: Two simple instruments, the DT and the MT, were found to have acceptable levels of sensitivity and specificity in detecting psychosocial morbidity. Compared to the HADS, however, the mood MT performed better than the DT.

Lutar por uma vida melhor

O presente trabalho pretende dar conta do projecto de investigação e intervenção social desenvolvido com uma família acompanhada no âmbito do Rendimento Social de Inserção (RSI). Parte, em termos teóricos, da complexidade e variabilidade do trabalho social, considerando as suas diferentes visões e a sua construção social, destacando a existência de diferentes forças que constroem e influenciam a acção psicossocial. Enfatiza, em função das fragilidades do modelo tradicional de intervenção, a necessidade dos profissionais repensarem e qualificarem as suas intervenções e, ainda, a importância do modelo de relação de ajuda e da abordagem sistémica no desenvolvimento do trabalho psicossocial e educativo desenvolvido pelos educadores sociais. O projecto desenvolvido assenta no paradigma emergente, constituindo uma investigação qualitativa, orientada por uma metodologia de investigação-acção participativa. Estas opções metodológicas permitiram o desenvolvimento de um trabalho plenamente cooperativo, que partiu dos seus participantes, das suas circunstâncias reais, ou seja, dos problemas concretos da família, numa lógica de aproximação entre saberes. Foi desenvolvido com a finalidade de promover a melhoria da qualidade de vida da família, nomeadamente ao nível da habitação, educação e relações familiares e permitiu, em linhas gerais, que a família adquirisse maior poder de decisão sobre a sua vida, expectativas mais positivas relativamente ao futuro, interacções familiares mais positivas e uma crescente consciência da importância de um maior envolvimento e empenho nas questões relacionadas com a escola e com as aprendizagens escolares.

Heróis de palmo e meio: a intervenção psicossocial e a relação de ajuda no acolhimento institucional

Os Lares de Infância e Juventude têm como objetivo defender o superior interesse das crianças, desempenhando um papel fundamental no acompanhamento do seu desenvolvimento. Este dever concretiza-se substancialmente na definição e acompanhamento dos seus projetos de vida. Neste sentido, as práticas dos profissionais devem ir ao encontro das reais necessidades dos seus atores, numa ação adequada, desenhada e concertada, tendo sempre como principio básico o respeito pelas idiossincrasias de cada criança e jovem. O presente Relatório tem como objetivo apresentar o desenho e desenvolvimento de um projeto de intervenção psicossocial e relação de ajuda com crianças em acolhimento institucional, intitulado “Heróis de Palmo e Meio. A intervenção psicossocial e a relação de ajuda no acolhimento institucional”. Este projeto teve como grande finalidade a “Participação das crianças e das suas famílias na construção dos seus projetos de vida com base na compreensão da institucionalização”. Priorizando as necessidades e respeitando o critério de urgência, foram desenhados dois subprojectos com duas crianças e suas famílias, tentando sempre responder às suas necessidades individuais. Foram definidos alguns objetivos gerais comuns, assim como objetivos específicos, estratégias e ações adequadas a cada um dos subprojectos. Os resultados deste projeto revelam-se significativos, já que permitiram, quer às crianças, quer às famílias, desenvolver um processo de reflexão e consciencialização em torno da sua história de vida, compreensão da sua realidade e participação ativa no projeto de vida dos filhos, o que veio facilitar o caminho inicial do processo da mudança.

Challenges in the creation and development of a mathematics MOOC

The fast development of distance learning tools such as Open Educational Resources (OER) and Massive Open Online Courses (MOOC or MOOCs) are indicators of a shift in the way in which digital teaching and learning are understood. MOOC are a new style of online classes that allow any person with web access, anywhere, usually free of charge, to participate through video lectures, computer graded tests and discussion forums. They have been capturing the attention of many higher education institutions around the world. This paper will give us an overview of the “Introduction to Differential Calculus” a MOOC Project, created by an engaged volunteer team of Mathematics lecturers from four schools of the Polytechnic Institute of Oporto (IPP). The MOOC theories and their popularity are presented and complemented by a discussion of some MOOC definitions and their inherent advantages and disadvantages. It will also explore what MOOC mean for Mathematics education. The Project development is revealed by focusing on used MOOC structure, as well as the quite a lot of types of course materials produced. It ends with a presentation of a short discussion about problems and challenges met throughout the development of the project. It is also our goal to contribute for a change in the way teaching and learning Mathematics is seen and practiced nowadays, trying to make education more accessible to as many people as possible and increase our institution (IPP) recognition.

Development of an Unmanned Capsule for large-scale maritime search and rescue

This paper describes the development and testing of a robotic capsule for search and rescue operations at sea. This capsule is able to operate autonomously or remotely controlled, is transported and deployed by a larger USV into a determined disaster area and is used to carry a life raft and inflate it close to survivors in large-scale maritime disasters. The ultimate goal of this development is to endow search and rescue teams with tools that extend their operational capability in scenarios with adverse atmospheric or maritime conditions.