Evaluating alternative industrial network organizations and information systems

Purpose – The purpose of this paper is to present a simulation‐based evaluation method for the comparison of different organizational forms and software support levels in the field of supply chain management (SCM). Design/methodology/approach – Apart from widely known logistic performance indicators, the discrete event simulation model considers explicitly coordination cost as stemming from iterative administration procedures. Findings - The method is applied to an exemplary supply chain configuration considering various parameter settings. Curiously, additional coordination cost does not always result in improved logistic performance. Influence factor variations lead to different organizational recommendations. The results confirm the high importance of (up to now) disregarded dimensions when evaluating SCM concepts and IT tools. Research limitations/implications – The model is based on simplified product and network structures. Future research shall include more complex, real world configurations. Practical implications – The developed method is designed for the identification of improvement potential when SCM software is employed. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and the method provides a comprehensive tool for strategic IT decision making. Originality/value – Reviewed literature is mostly focused on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but associated coordination cost has not been addressed by researchers.

A review and a conceptual framework of the key value drivers of mass customisation

The aim of this paper is to conceptualise the key value drivers of mass customisation in order to provide a structured approach to explain the added value that customers attribute to mass customised products. We assume that the added value of mass customisation is ultimately reflected in an increased willingness to pay. Previous studies show diverse results concerning customers' willingness to pay for mass customised products. We contribute to the existing body of research by suggesting and discussing the influence of general product characteristics and factors of the mass customisation approach on the key value drivers of mass customisation. Furthermore, the development of a conceptual framework offers explanations for the dissimilarity in customers' willingness to pay and advances the knowledge about the value increment of mass customised products as perceived by customers.

Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study.

The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways.

Fluoro-sensing applied to detection and identification of hydrocarbons in inland waters. Study of the impact of different UV light sources

This paper presents the detection and identification of hydrocarbons through flu oro-sensing by developing a simple and inexpensive detector for inland water, in contrast to current systems, designed to be used for marine waters at large distances and being extremely costly. To validate the proposed system, three test-benches have been mounted, with various UV-Iight sources. Main application of this system would be detect hydrocarbons pollution in rivers, lakes or dams, which in fact, is of growing interest by administrations.

Self-Tuning PID controller for autonomous car tracking in urban traffic

In this paper an on line self-tuned PID controller is proposed for the control of a car whose goal is to follow another one, at distances and speeds typical in urban traffic. The bestknown tuning mechanism is perhaps the MIT rule, due to its ease of implementation. However, as it is well known, this method does not guarantee the stability of the system, providing good results only for constant or slowly varying reference signals and in the absence of noise, which are unrealistic conditions. When the reference input varies with an appreciable rate or in presence of noise, eventually it could result in system instability. In this paper an alternative method is proposed that significantly improves the robustness of the system for varying inputs or in the presence of noise, as demonstrated by simulation.

FPGA-Based Wireless Sensor Node Architecture for High Performance Applications

While for years traditional wireless sensor nodes have been based on ultra-low power microcontrollers with sufficient but limited computing power, the complexity and number of tasks of today’s applications are constantly increasing. Increasing the node duty cycle is not feasible in all cases, so in many cases more computing power is required. This extra computing power may be achieved by either more powerful microcontrollers, though more power consumption or, in general, any solution capable of accelerating task execution. At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall. In order to demonstrate this, an innovative WSN node architecture is proposed. This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved. Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

Entornos de ayuda a la vida independiente de personas mayores sobre servicios de redes de próxima generación

El progresivo envejecimiento de la población está produciendo una elevada demanda de servicios socio‐asistenciales por parte de las personas mayores para mantener su vida independiente y el consiguiente “envejecimiento activo”. La iniciativa Ambient Assisted Living (AAL) promueve el “envejecimiento activo” a través de las Tecnologías de la Información y las Comunicaciones (TIC) y es en ella donde se centrará el trabajo de esta tesis doctoral. Una característica fundamental de los servicios AAL es su adaptación y personalización a las características y preferencias del usuario y su contexto. Así, el paradigma “context awareness” presenta una gran relevancia en la provisión de servicios AAL y en el soporte a la vida independiente de las personas mayores. Concretamente, la utilización de ontologías permite crear modelos de usuarios y contexto que pueden ser utilizadas para los mecanismos de razonamiento incluidos en los servicios context‐aware. Por otra parte, los usuarios actualmente precisan acceder a un conjunto de servicios desde cualquier red de acceso y desde cualquier dispositivo. Las redes de próxima generación (Next Generation Networks‐NGN) lo hacen posible pues ofrecen una convergencia dispositivo‐red‐servicio. La tecnología IMS (IP Multimedia Subsystem) es una arquitectura que implementa el paradigma NGN y ofrece una serie de servicios de red genéricos llamados servicios habilitadores o enablers que pueden ser reutilizados en cualquier aplicación, soportando mecanismos de interoperabilidad entre aplicaciones y permitiendo un desarrollo robusto, rápido y sencillo. Además, los servicios enablers permiten mecanismos de gestión de la información de usuario para realizar una provisión adaptada del servicio en función de la información del estado del usuario. El objetivo de esta tesis doctoral se centra en establecer un marco de convergencia entre estos dos campos diseñando y desarrollando un conjunto de servicios enablers soportados en una arquitectura IMS implementada para soportar la provisión de aplicaciones AAL bajo el paradigma context‐awareness y la triple convergencia reddispositivo‐ servicio cubriendo así las necesidades y requisitos de las personas mayores. Entre las aportaciones de la presente tesis se destaca la realización de un modelo de plataforma servicios AAL, denominado Residencia Virtual Asistiva, para su provisión en el domicilio de la persona mayor, así como la propuesta de implementación de sus servicios a través de servicios enablers. Por otra parte se define una ontología destinada a modelar servicios AAL así como sus usuarios (personas mayores) para lograr una provisión personalizada y adaptada de servicios AAL. Esta ontología se ha implementado a través del servicio de presencia de la arquitectura IMS para poder crear perfiles de usuario y así poder realizar dicha provisión personalizada. Además, se desarrolla una aplicación de teleconsulta, como ejemplo de servicio AAL, que utiliza una serie de servicios enablers desarrollados para ofrecer funcionalidades avanzadas a la aplicación. Bajo el paradigma contex‐awareness se ha desarrollado y evaluado técnicamente un servicio enabler para ofrecer soporte a la movilidad y a la independencia de las personas mayores con deterioro cognitivo que sufren episodios de desorientación espacial. ABSTRACT The progressive ageing of the population is making elderly people demand sociohealthcare services to maintain an independent living and therefore an “active ageing”. The initiative Ambient Assisted Living (AAL), on which the current PhD thesis is focused, promotes the “active ageing” by means of Information and Communication Technologies (ICT). Essential features of AAL services are the adaptation and personalization to the user’s characteristics and preferences as well as user’s context. Thus, the “context‐awareness” paradigm implies a great importance in the AAL service provision and the elderly independent living support. In particular, the usage of ontologies allows creating user and contexts models to be employed in the reasoning mechanism of context‐aware services. On the other hand, users currently require accessing to a set of services from anywhere and any device. Next‐Generation Networks (NGN) support this need by offering a service‐network‐device convergence. The IP Multimedia Subsystem (IMS) technology is an architecture that implements the NGN paradigm and offers a generic network services know as service enabler which can be reused by any application supporting application interoperability mechanism as well as allowing a simple, fast and robust application development. Furthermore, the service enablers offer user’s information management procedures to achieve and adapt service provision considering the user’s status. The objective of this PhD thesis is focused on establishing a convergence framework between these two previous fields by designing and developing a group of service enablers that will be deployed in an IMS architecture. The enablers developed will support the AAL applications provision from the context‐awareness paradigm and service‐network‐device convergence in order to cover the elderly people’s requirements and needs. Among the contributions achieved in this PhD thesis, the definition of an AAL platform service model, named as “Assited Virtual Nursing Home”, for being deployed in the older adult home is emphasised. In addition, a proposal of service enablers to support the AAL service defined in the model is made. Otherwise, an ontology is defined to model AAL services as well as their users with the aim at achieve a personalized and adapted AAL service. This ontology has been implemented by means of the IMS service presence in order to create users profiles to be used in the personalized AAL services. As an example of AAL service, a teleconsulting application has been developed to employ a group of service enablers developed using a set of advanced functionalities. Considering the context‐paradigm, a service enabler has been developed and technologically evaluated to support the mobility and independence of elderly people with mild cognitive impairment who suffers spatial disorientation episodes.

High reynolds numbers turbulent boundary layers

Esta tesis estudia las similitudes y diferencias entre los flujos turbulentos de pared de tipo externo e interno, en régimen incompresible, y a números de Reynolds moderada¬mente altos. Para ello consideramos tanto simulaciones numéricas como experimentos de capas límites con gradiente de presiones nulo y de flujos de canal, ambos a números de Reynolds en el rango δ+ ~ 500 - 2000. Estos flujos de cortadura son objeto de numerosas investigaciones debido a la gran importancia que tienen tanto a nivel tecnológico como a nivel de física fundamental. No obstante, todavía existen muchos interrogantes sobre aspectos básicos tales como la universalidad de los perfiles medios y de fluctuación de las velocidades o de la presión, tanto en la zona cercana a la pared como en la zona logarítmica, el escalado y el efecto del número de Reynolds, o las diferencias entre los flujos internos y externos en la zona exterior. En éste estudio hemos utilizado simulaciones numéricas ya existentes de canales y capas límites a números de Reynolds δ+ ~ 2000 y δ+ ~ 700, respectivamente. Para poder comparar ambos flujos a igual número de Reynolds hemos realizado una nueva simulación directa de capa límite en el rango δ+ ~ 1000-2000. Los resultados de la misma son presentados y analizados en detalle. Los datos sin postprocesar y las estadísticas ya postprocesadas están públicamente disponibles en nuestro sitio web.162 El análisis de las estadísticas usando un único punto confirma la existencia de perfiles logarítmicos para las fluctuaciones de la velocidad transversal w'2+ y de la presión p'2+ en ambos tipos de flujos, pero no para la velocidad normal v'2+ o la velocidad longitudinal u'2+. Para aceptar o rechazar la existencia de un rango logarítmico en u'2+ se requieren números de Reynolds más altos que los considerados en éste trabajo. Una de las conse¬cuencias más importantes de poseer tales perfiles es que el valor máximo de la intensidad, que se alcanza cerca de la pared, depende explícitamente del número de Reynolds. Esto ha sido confirmado tras analizar un gran número de datos experimentales y numéricos, cor¬roborando que el máximo de u'2+, p/2+, y w'2+ aumenta proporcionalmente con el log(δ+). Por otro lado, éste máximo es más intenso en los flujos externos que en los internos. La máxima diferencia ocurre en torno a y/δ ~ 0.3-0.5, siendo esta altura prácticamente independiente del número de Reynolds considerado. Estas diferencias se originan como consecuencia del carácter intermitente de las capas límites, que es inexistente en los flujos internos. La estructura de las fluctuaciones de velocidad y de presión, junto con la de los esfuer¬zos de Reynolds, se han investigado por medio de correlaciones espaciales tridimensionales considerando dos puntos de medida. Hemos obtenido que el tamaño de las mismas es gen¬eralmente mayor en canales que en capas límites, especialmente en el caso de la correlación longitudinal Cuu en la dirección del flujo. Para esta correlación se demuestra que las es¬tructuras débilmente correladas presentan longitudes de hasta 0(75), en el caso de capas límites, y de hasta 0(185) en el caso de canales. Estas longitudes se obtienen respecti-vamente en la zona logarítmica y en la zona exterior. Las longitudes correspondientes en la dirección transversal son significativamente menores en ambos flujos, 0(5 — 25). La organización espacial de las correlaciones es compatible con la de una pareja de rollos casi paralelos con dimensiones que escalan en unidades exteriores. Esta organización se mantiene al menos hasta y ~ 0.65, altura a la cual las capas límites comienzan a organi¬zarse en rollos transversales. Este comportamiento es sin embargo más débil en canales, pudiéndose observar parcialmente a partir de y ~ 0.85. Para estudiar si estas estructuras están onduladas a lo largo de la dirección transver¬sal, hemos calculado las correlaciones condicionadas a eventos intensos de la velocidad transversal w'. Estas correlaciones revelan que la ondulación de la velocidad longitudinal aumenta conforme nos alejamos de la pared, sugiriendo que las estructuras están más alineadas en la zona cercana a la pared que en la zona lejana a ella. El por qué de esta ondulación se encuentra posiblemente en la configuración a lo largo de diagonales que presenta w'. Estas estructuras no sólo están onduladas, sino que también están inclinadas respecto a la pared con ángulos que dependen de la variable considerada, de la altura, y de el contorno de correlación seleccionado. Por encima de la zona tampón e independien¬temente del número de Reynolds y tipo de flujo, Cuu presenta una inclinación máxima de unos 10°, las correlaciones Cvv y Cm son esencialmente verticales, y Cww está inclinada a unos 35°. Summary This thesis studies the similitudes and differences between external and internal in¬compressible wall-bounded turbulent flows at moderately-high Reynolds numbers. We consider numerical and experimental zero-pressure-gradient boundary layers and chan¬nels in the range of δ+ ~ 500 — 2000. These shear flows are subjects of intensive research because of their technological importance and fundamental physical interest. However, there are still open questions regarding basic aspects such as the universality of the mean and fluctuating velocity and pressure profiles at the near-wall and logarithmic regions, their scaling and the effect of the Reynolds numbers, or the differences between internal and external flows at the outer layer, to name but a few. For this study, we made use of available direct numerical simulations of channel and boundary layers reaching δ+ ~ 2000 and δ+ ~ 700, respectively. To fill the gap in the Reynolds number, a new boundary layer simulation in the range δ+ ~ 1000-2000 is presented and discussed. The original raw data and the post-processed statistics are publicly available on our website.162 The analysis of the one-point statistic confirms the existence of logarithmic profiles for the spanwise w'2+ and pressure p'2+ fluctuations for both type of flows, but not for the wall-normal v'2+ or the streamwise u'2+ velocities. To accept or reject the existence of a logarithmic range in u'2+ requires higher Reynolds numbers than the ones considered in this work. An important consequence of having such profiles is that the maximum value of the intensities, reached near the wall, depends on the Reynolds number. This was confirmed after surveying a wide number of experimental and numerical datasets, corrob¬orating that the maximum of ul2+, p'2+, and w'2+ increases proportionally to log(δ+). On the other hand, that maximum is more intense in external flows than in internal ones, differing the most around y/δ ~ 0.3-0.5, and essentially independent of the Reynolds number. We discuss that those differences are originated as a consequence of the inter¬mittent character of boundary layers that is absent in internal flows. The structure of the velocity and pressure fluctuations, together with those of the Reynolds shear stress, were investigated using three-dimensional two-point spatial correlations. We find that the correlations extend over longer distances in channels than in boundary layers, especially in the case of the streamwise correlation Cuu in the flow direc-tion. For weakly correlated structures, the maximum streamwise length of Cuu is O(78) for boundary layers and O(188) for channels, attained at the logarithmic and outer regions respectively. The corresponding lengths for the transverse velocities and for the pressure are shorter, 0(8 — 28), and of the same order for both flows. The spatial organization of the velocity correlations is shown to be consistent with a pair of quasi-streamwise rollers that scales in outer units. That organization is observed until y ~ 0.68, from which boundary layers start to organize into spanwise rollers. This effect is weaker in channels, and it appears at y ~ 0.88. We present correlations conditioned to intense events of the transversal velocity, w', to study if these structures meander along the spanwise direction. The results indicate that the streamwise velocity streaks increase their meandering proportionally to the distance to the wall, suggesting that the structures are more aligned close to the wall than far from it. The reason behind this meandering is probably due to the characteristic organization along diagonals of w'. These structures not only meander along the spanwise direction, but they are also inclined to the wall at angles that depend on the distance from the wall, on the variable being considered, and on the correlation level used to define them. Above the buffer layer and independent of the Reynolds numbers and type of flow, the maximum inclination of Cuu is about 10°, Cvv and Cpp are roughly vertical, and Cww is inclined by 35°.

Diseño y fabricación de un equipo de prácticas para el aprendizaje del proceso de sincronización de generadores síncronos a la red

La finalidad del proyecto es el diseño y la fabricación de un equipo de prácticas que permita a los alumnos ensayar el proceso de sincronización real de un generador síncrono a la red. El diseño consiste en un equipo de prácticas con el cual el alumno deberá acoplar el generador, previa verificación de la tensión, frecuencia y ángulo de fase con un sincronoscopio monofásico. Durante el proceso, el profesor podrá ir provocando errores de fase en las tensiones que el alumno deberá corregir. Al término del proceso, el alumno, si ha conseguido acoplar el generador, recibirá una calificación sobre diez en una pantalla LCD. Posteriormente se llevaran a cabo ensayos con alumnos voluntarios. ABSTRACT The purpose of the project is the design and manufacture of an equipment which allows students to perform the process of synchronization of a synchronous generator to the grid. The design consists of an equipment with which students must synchronize the generator to the grid, after checking voltage, frequency or phase angle with a single-phase synchronoscope. During that process, the teacher can cause phase angle errors in the voltage which students must solve. At the end of the process, if students have been able to synchronize the generator to the grid, they will receive a mark on an LCD screen. Afterwards a testing is going to be run by volunteers.

Magnificador basado en teléfono móvil: función de magnificación

En este Trabajo fin de Grado se ha creado la parte funcional de una aplicación móvil dejando la parte de la interfaz libre para su futura implementación. La aplicación es un magnificador y está destinada a aquellas personas con baja visión, permitiéndoles hacer aumento de imágenes y textos capturados por la cámara del dispositivo, con la posibilidad de que puedan cambiar algunos parámetros de la magnificación para poderlo ver mejor. La parte funcional de la aplicación fue nombrada como librería magnificador, ya que se compone de métodos implementados en Java que permiten hacer diferentes modificaciones de la imagen o del video visualizado. Se cubrieron todas las fases de desarrollo más significativas de un sistema software: análisis, diseño, implementación y pruebas. La aplicación se desarrolló para Android. Se trabajó en Eclipse con Android SDK. Para el procesamiento de las imágenes se aprovechó una librería externa, OpenCV, para evitar “inventar la rueda”, es decir, no escribir algoritmos de transformación de las imágenes que seguramente no podrían ser tan eficientes como los implementados en dicha librería creada por Intel. ---ABSTRACT---In this Final Project, the functional part of mobile phone application was created, leaving the interface parte for future implementation. The application is a magnifier and is oriented to people with very low vision allowing them to enlarge images of printed documents captured by the camera of the mobile phone device, with the possibility that they can change some parameters of magnification so that it can see better. The functional part of this application was named magnifier library because it composes of methods, implemented in Java, that allows changing between different modes of the preview of the image or video. All of the most significant phases of software development were satisfied: analysis, design, implementation and tests. The application was created for Android. The work was done in Eclipse with Android SDK plugin. For the image processing, an external library, OpenCv, was used, to avoid the unreachable intent of creation of effective algorithms that would never be so potent like the implemented in this library created by Intel.

Composición florística y etnobotánica de las diferentes formaciones vegetales de la provincia de Loja, Ecuador

Pese a que Loja (Ecuador) presenta una gran riqueza ecológica y cultural, ni su patrimonio etnobotánico, ni cómo afecta el uso de las plantas al estado de conservación de los ecosistemas es bien conocido. Por ello se ha realizado un estudio etnobotánico y ecológico para conocer el papel que han jugado las plantas en la cultura tradicional de la provincia y comprender qué factores influyen en su uso. Durante 2006 y 2008 se entrevistó a 770 informantes (196 de ellos vendedores en mercados locales) y se realizaron 373 transectos en 118 remanentes boscosos, 51% indicados por la gente como lugares de recolección. Se ha registrado el saber etnobotánico de 717 especies pertenecientes a 143 familias, la mayoría nativas del Ecuador, 31 de ellas endémicas. Ello supone un 15% de la flora total de Loja. Sin embargo especies introducidas como Matricaria recutita o Eucalyptus globulus están entre las más citadas. La mayor riqueza se obtuvo para las plantas medicinales (509 especies), que se usan sobre todo para tratar las llamadas “inflamaciones internas” (210 especies, Matricaria recutita y Melissa officinalis principalmente) y trastornos del sistema digestivo (188, Matricaria recutita y Mentha pulegium). En los mercados se venden 169 especies, la mayoría para elaborar la bebida típica llamada horchata (65) y para curar “inflamaciones internas” (36). Además se emplean 414 con otros fines (161 para leña, 142 para alimentación humana, 133 para construcción de viviendas y muebles, 98 para artesanías, 89 ornamentales, 27 tintóreas y 72 para otros usos). En los remanentes se inventariaron 19.156 individuos correspondientes a 1440 especies de 153 familias, de las cuales 437 son empleadas por la población. La riqueza media de especies y de plantas útiles fue significativamente mayor en los remanentes recolectados lo cual parece demostrar que la explotación no afecta negativamente a la diversidad de especies al generar variabilidad de hábitats. También se vio que la proporción de especies útiles disminuye en los remanentes más diversos. También se observó que la probabilidad de uso de una especie aumenta con la frecuencia y la abundancia y disminuye con la distancia a los remanentes en los que aparece. Este patrón general no se cumple para las especies medicinales y ornamentales. Estos datos demuestran una gran riqueza de conocimientos tradicionales y una gran vitalidad del uso de muchas especies y corroboran la hipótesis de que los recursos vegetales más accesibles y abundantes son, salvo excepciones, los más empleados por la gente. ABSTRACT Although the Loja province (Ecuador) has a great ecological and cultural richness, neither the ethnobotanical heritage nor the incidence of plant use on ecosystems conservation it is well known. We have made an ethnobotanical and ecological study to determine the role played by plants in the traditional culture of the province and to understand what factors influence their use. Between 2006 and 2008 we interviewed 770 informants (196 of them vendors in local markets) and inventoried 373 transects in 118 forest remnants (51% of them indicated by people as collection sites). We recorded the ethnobotanical knowledge for 717 species belonging to 143 families, mostly native of Ecuador, 31 of which are endemic. This represents about a 15% of the total flora of Loja. However introduced species such as Matricaria recutita and Eucalyptus globulus are among the most cited. Medicinal plants (509 species) were the most abundant, and are used primarily to treat so‐called "internal inflammation" (210 species, with Matricaria recutita and Melissa officinalis as the most valued) and disorders of the digestive system (188, Matricaria recutita and Mentha pulegium). We recorded 169 species sold in markets, most of them (65) employed to elaborate a typical drink called horchata and to heal "internal inflammation" (36). In addition 414 are used for other purposes: 161 for firewood, 142 for human consumption, 133 for construction and furniture, 98 for handicrafts, 89 as ornamental, 27 for dye and 72 for other uses. In the forest remnants, 19,156 individuals corresponding to 1440 species of 153 families, 437 of which are used by the population were inventoried. The average species richness (both total and of useful plants) was significantly higher in exploited remnants, which suggest that exploitation does not adversely affect species diversity and instead increases habitat diversity. We also found that the proportion of useful species decreases in decreased in the most diverse remnants. It was also observed that the probability of use of a species increases with its frequency and abundance and decreases as the distance form localities to remnants where it appears increases. This general pattern however does not hold for medicinal and ornamental species. These results show the extraordinary wealth of traditional knowledge and the great vitality in the use of many species and support the hypothesis that most accessible and abundant plant resources are the most used by people.

Climatic analysis methodology of vernacular architecture

Vernacular architecture has demonstrated its perfect environmental adaptation through its empirical development and improvement by generations of user-builders. Nowadays, the sustainability of vernacular architecture is the aim of some research projects in which the same method should be applied in order to be comparable. Hence, we propose a research method putting together various steps. Through the analysis of geographical, lithology, economic, cultural and social influence as well as materials and constructive systems, vernacular architecture is analyzed. But, all this information is put together with the natural landscape (topography and vegetation) and the climatic data (temperature, winds, rain and sun exposure). In addition, the use of bioclimatic charts, such as Olgyay or Givoni’s, revealed the necessities and strategies in urban and building design. They are satisfied in the vernacular architecture by the application of different energy conservation mechanisms, some of them are shown by different examples in this paper.

Desarrollo de un sistema hardware modular que implemente los instrumentos de un laboratorio de electrónica

El poder disponer de la instrumentación y los equipos electrónicos resulta vital en el diseño de circuitos analógicos. Permiten realizar las pruebas necesarias y el estudio para el buen funcionamiento de estos circuitos. Los equipos se pueden diferenciar en instrumentos de excitación, los que proporcionan las señales al circuito, y en instrumentos de medida, los que miden las señales generadas por el circuito. Estos equipos sirven de gran ayuda pero a su vez tienen un precio elevado lo que impide en muchos casos disponer de ellos. Por esta principal desventaja, se hace necesario conseguir un dispositivo de bajo coste que sustituya de alguna manera a los equipos reales. Si el instrumento es de medida, este sistema de bajo coste puede ser implementado mediante un equipo hardware encargado de adquirir los datos y una aplicación ejecutándose en un ordenador donde analizarlos y presentarlos en la pantalla. En el caso de que el instrumento sea de excitación, el único cometido del sistema hardware es el de proporcionar las señales cuya configuración ha enviado el ordenador. En un equipo real, es el propio equipo el que debe realizar todas esas acciones: adquisición, procesamiento y presentación de los datos. Además, la dificultad de realizar modificaciones o ampliaciones de las funcionalidades en un instrumento tradicional con respecto a una aplicación de queda patente. Debido a que un instrumento tradicional es un sistema cerrado y uno cuya configuración o procesamiento de datos es hecho por una aplicación, algunas de las modificaciones serían realizables modificando simplemente el software del programa de control, por lo que el coste de las modificaciones sería menor. En este proyecto se pretende implementar un sistema hardware que tenga las características y realice las funciones del equipamiento real que se pueda encontrar en un laboratorio de electrónica. También el desarrollo de una aplicación encargada del control y el análisis de las señales adquiridas, cuya interfaz gráfica se asemeje a la de los equipos reales para facilitar su uso. ABSTRACT. The instrumentation and electronic equipment are vital for the design of analogue circuits. They enable to perform the necessary testing and study for the proper functioning of these circuits. The devices can be classified into the following categories: excitation instruments, which transmit the signals to the circuit, and measuring instruments, those in charge of measuring the signals produced by the circuit. This equipment is considerably helpful, however, its high price often makes it hardly accessible. For this reason, low price equipment is needed in order to replace real devices. If the instrument is measuring, this low cost system can be implemented by hardware equipment to acquire the data and running on a computer where analyzing and present on the screen application. In case of an excitation the instrument, the only task of the hardware system is to provide signals which sent the computer configuration. In a real instrument, is the instrument itself that must perform all these actions: acquisition, processing and presentation of data. Moreover, the difficulty of making changes or additions to the features in traditional devices with respect to an application running on a computer is evident. This is due to the fact that a traditional instrument is a closed system and its configuration or data processing is made by an application. Therefore, certain changes can be made just by modifying the control program software. Consequently, the cost of these modifications is lower. This project aims to implement a hardware system with the same features and functions of any real device, available in an electronics laboratory. Besides, it aims to develop an application for the monitoring and analysis of acquired signals. This application is provided with a graphic interface resembling those of real devices in order to facilitate its use.

Finite element simulation of dispersion in the Bay of Santander

Two mathematical models are used to simulate pollution in the Bay of Santander. The first is the hydrodynamic model that provides the velocity field and height of the water. The second gives the pollutant concentration field as a resultant. Both models are formulated in two-dimensional equations. Linear triangular finite elements are used in the Galerkin procedure for spatial discretization. A finite difference scheme is used for the time integration. At each time step the calculated results of the first model are input to the second model as field data. The efficiency and accuracy of the models are tested by their application to a simple illustrative example. Finally a case study in simulation of pollution evolution in the Bay of Santander is presented

Evaluating a web-based clinical decision support system for language disorders screening in a nursery school

Background: Early and effective identification of developmental disorders during childhood remains a critical task for the international community. The second highest prevalence of common developmental disorders in children are language delays, which are frequently the first symptoms of a possible disorder. Objective: This paper evaluates a Web-based Clinical Decision Support System (CDSS) whose aim is to enhance the screening of language disorders at a nursery school. The common lack of early diagnosis of language disorders led us to deploy an easy-to-use CDSS in order to evaluate its accuracy in early detection of language pathologies. This CDSS can be used by pediatricians to support the screening of language disorders in primary care. Methods: This paper details the evaluation results of the ?Gades? CDSS at a nursery school with 146 children, 12 educators, and 1 language therapist. The methodology embraces two consecutive phases. The first stage involves the observation of each child?s language abilities, carried out by the educators, to facilitate the evaluation of language acquisition level performed by a language therapist. Next, the same language therapist evaluates the reliability of the observed results. Results: The Gades CDSS was integrated to provide the language therapist with the required clinical information. The validation process showed a global 83.6% (122/146) success rate in language evaluation and a 7% (7/94) rate of non-accepted system decisions within the range of children from 0 to 3 years old. The system helped language therapists to identify new children with potential disorders who required further evaluation. This process will revalidate the CDSS output and allow the enhancement of early detection of language disorders in children. The system does need minor refinement, since the therapists disagreed with some questions from the CDSS knowledge base (KB) and suggested adding a few questions about speech production and pragmatic abilities. The refinement of the KB will address these issues and include the requested improvements, with the support of the experts who took part in the original KB development. Conclusions: This research demonstrated the benefit of a Web-based CDSS to monitor children?s neurodevelopment via the early detection of language delays at a nursery school. Current next steps focus on the design of a model that includes pseudo auto-learning capacity, supervised by experts.