A Balanced Memory-Based Collaborative Filtering Similarity Measure.

Collaborative filtering recommender systems contribute to alleviating the problem of information overload that exists on the Internet as a result of the mass use of Web 2.0 applications. The use of an adequate similarity measure becomes a determining factor in the quality of the prediction and recommendation results of the recommender system, as well as in its performance. In this paper, we present a memory-based collaborative filtering similarity measure that provides extremely high-quality and balanced results; these results are complemented with a low processing time (high performance), similar to the one required to execute traditional similarity metrics. The experiments have been carried out on the MovieLens and Netflix databases, using a representative set of information retrieval quality measures.

Obtaining contradiction measure on intuitionistic fuzzy sets from fuzzy connectives

In a previous paper, we proposed an axiomatic model for measuring self-contradiction in the framework of Atanassov fuzzy sets. This way, contradiction measures that are semicontinuous and completely semicontinuous, from both below and above, were defined. Although some examples were given, the problem of finding families of functions satisfying the different axioms remained open. The purpose of this paper is to construct some families of contradiction measures firstly using continuous t-norms and t-conorms, and secondly by means of strong negations. In both cases, we study the properties that they satisfy. These families are then classified according the different kinds of measures presented in the above paper.

A methodology to measure the interface shear strength by means of the fiber push-in test

A methodology is presented to measure the fiber/matrix interface shear strength in composites. The strategy is based on performing a fiber push-in test at the central fiber of highly-packed fiber clusters with hexagonal symmetry which are often found in unidirectional composites with a high volume fraction of fibers. The mechanics of this test was analyzed in detail by means of three-dimensional finite element simulations. In particular, the influence of different parameters (interface shear strength, toughness and friction as well as fiber longitudinal elastic modulus and curing stresses) on the critical load at the onset of debonding was established. From the results of the numerical simulations, a simple relationship between the critical load and the interface shear strength is proposed. The methodology was validated in an unidirectional C/epoxy composite and the advantages and limitations of the proposed methodology are indicated.

Topological measure locating the effective crossover between segregation and integration in a modular network

We introduce an easily computable topological measure which locates the effective crossover between segregation and integration in a modular network. Segregation corresponds to the degree of network modularity, while integration is expressed in terms of the algebraic connectivity of an associated hypergraph. The rigorous treatment of the simplified case of cliques of equal size that are gradually rewired until they become completely merged, allows us to show that this topological crossover can be made to coincide with a dynamical crossover from cluster to global synchronization of a system of coupled phase oscillators. The dynamical crossover is signaled by a peak in the product of the measures of intracluster and global synchronization, which we propose as a dynamical measure of complexity. This quantity is much easier to compute than the entropy (of the average frequencies of the oscillators), and displays a behavior which closely mimics that of the dynamical complexity index based on the latter. The proposed topological measure simultaneously provides information on the dynamical behavior, sheds light on the interplay between modularity and total integration, and shows how this affects the capability of the network to perform both local and distributed dynamical tasks.

Dominance intensity measure within fuzzy weight oriented MAUT: an application

We introduce a dominance intensity measuring method to derive a ranking of alternatives to deal with incomplete information in multi-criteria decision-making problems on the basis of multi-attribute utility theory (MAUT) and fuzzy sets theory. We consider the situation where there is imprecision concerning decision-makers’ preferences, and imprecise weights are represented by trapezoidal fuzzy weights.The proposed method is based on the dominance values between pairs of alternatives. These values can be computed by linear programming, as an additive multi-attribute utility model is used to rate the alternatives. Dominance values are then transformed into dominance intensity measures, used to rank the alternatives under consideration. Distances between fuzzy numbers based on the generalization of the left and right fuzzy numbers are utilized to account for fuzzy weights. An example concerning the selection of intervention strategies to restore an aquatic ecosystem contaminated by radionuclides illustrates the approach. Monte Carlo simulation techniques have been used to show that the proposed method performs well for different imprecision levels in terms of a hit ratio and a rank-order correlation measure.

Safety and health in forest harvesting operations. Diagnosis and preventive actions. A review

Aim of study: to review the present state of the art in relation to the main labour risks and the most relevant results of recent studies evaluating the safety and health conditions of the forest harvesting work and better ways to reduce accidents. Area of study: It focuses mainly on developed Countries, where the general concern about work risks prevention, together with the complex idiosyncrasy of forest work in forest harvesting operations, has led to a growing interest from the forest scientific and technical community. Material and Methods: The main bibliographic and Internet references have been identified using common reference analysis tools. Their conclusions and recommendations have been comprehensively summarized. Main results: Collection of the principal references and their most important conclusions relating to the main accident risk factors, their causes and consequences, the means used towards their prevention, both instrumental as well as in the aspects of training and business management, besides the influence of the growing mechanization of logging operations on those risks. Research highlights: Accident risk is higher in forest harvesting than in most other work sectors, and the main risk factors such as experience, age, seasonality, training, protective equipment, mechanization degree, etc. have been identified and studied. The paper summarizes some relevant results, one of the principal being that the proper entrepreneurial risk management is a key factor leading to the success in minimizing labour risks..

Estudio del impacto del usuario final en los procesos de desarrollo de sistemas de información

Durante décadas y aun en la actualidad muchas organizaciones, a nivel mundial, continúan afrontando pérdidas significativas debido a fracasos parciales y totales respecto a sus inversiones en sistemas de información (SI), planteando serios retos a los niveles gerenciales y los profesionales de SI. Estadísticas alarmantes y décadas de experiencia en la praxis en el área de SI en diversas organizaciones llevan al autor a poner el énfasis en los usuarios finales internos (UF) que son designados como representantes (UFR) de sus pares en los proyectos de desarrollo de SI (PDSI) por considerarlos como factores influyentes de manera significativa en el problema. Particularmente, con enfoque en ciertos factores de los UFR críticos para el éxito de los PDSI, con dimensiones analizadas de forma aislada o incompleta en otros estudios empíricos, a la fecha. No se encontraron estudios en Latinoamérica ni en otras latitudes que abordasen el fenómeno del éxito/fracaso de los SI desde el punto de vista adoptado en esta tesis. Por ello, esta investigación empírica ha evaluado en qué grado estos factores pudiesen influenciar los resultados durante el desarrollo e implementación de SI y su posible impacto en la satisfacción de los UF, siendo esta última aceptada por variados autores como la principal medida del éxito de los SI. Este estudio fue realizado en América Latina en las cuatro grandes empresas industriales que integran verticalmente el sector aluminio de Venezuela, sometidas a un macro PDSI para instalar el paquete, de tipo ERP, SAP/R3. Experimentados profesionales fueron encuestados o entrevistados, tales como altos ejecutivos, desarrolladores, líderes de proyecto y líderes de los UF. Un enfoque metodológico de triangulación permitió combinar un análisis cuantitativo con un análisis cualitativo interpretativo del tipo hermenéutico/dialéctico, hallándose resultados convergentes y complementarios. Un análisis estadístico, utilizando Partial Least Squares (PLS), seguido de un análisis hermenéutico/dialéctico. Los resultados confirmaron un hecho importante: en los casos problemáticos, paradójicamente, los orígenes de las razones de rechazo de esos SI argumentadas por los UF, en alto grado, apuntaron a los UFR o a ellos mismos. Los resultados también confirmaron la prevalencia de factores de orden cognitivo, conductual y político en estas organizaciones sobre los tecnológicos, al igual que el alto riesgo de dar por sentado la presencia y calidad de los factores requeridos de los UFR y de los otros factores estudiados. La validación estadística del modelo propuesto reveló al constructo conocimientos de los UFR como la principal variable latente, con los variables indicadoras que componen este constructo ejerciendo la mayor influencia sobre la calidad y el éxito de los SI. Un hallazgo contrario al de otros estudios, mostró que los conocimientos sobre las tecnologías de la información (TI) fueron los menos relevantes. Los SI de nómina y de administración de los RRHH fueron los más problemáticos, como suele ser el caso, por su complejidad en organizaciones grandes. Las conclusiones principales confirman el decisivo rol de los UF para el éxito de los PDSI y su relación con la creciente problemática planteada, la cual amerita más investigación y de las organizaciones una mayor atención y preparación. Descuidar los factores humanos y sociales así como una efectiva planificación y gestión de los mismos en preparación para estos proyectos origina serios riesgos. No obstante las limitaciones de este trabajo, la problemática analizada suele influir en los PDSI en diversas organizaciones, indistintamente de su tamaño o tipo de SI, estimándose, por tanto, que los resultados, conclusiones y recomendaciones de esta investigación tienen un alto grado de generalización. Una relación de indicadores claves es suministrada con fines preventivos. Finalmente, los factores evaluados pueden usarse para ampliar el modelo reconocido de DeLone y McLean (2003), conectándolos como variables latentes de sus variables independientes calidad de la información y calidad del SI. ABSTRACT For decades, many organizations worldwide have been enduring heavy losses due to partial and total failures regarding their investments in information systems (IS), posing serious challenges to all management levels and IS practitioners. Alarming statistics in this regard and decades of practice in the IS area lead the author to place an emphasis on the end users (EU) who are appointed in representation of their peers (EUR) to IS development projects (ISDP), considering them as highly influential factors on the problem. Especially, focusing on certain EUR success factors, and their dimensions, deemed critical to any IS development and implementation, omitted or not thoroughly analyzed neither in the theory nor in the empirical research on the subject, so far. No studies were found in Latin America or elsewhere addressing the phenomenon of IS success/failure from the perspective presented herein. Hence, this empirical research has assessed to what degree such factors can influence the outcomes of an ISDP and their feasible impact on the EU´s satisfaction, being the latter accepted by several authors as the main measure of IS success. This study was performed in Latin America embracing four major industrial enterprises, which vertically integrate the aluminum sector of Venezuela, subjected to a macro ISDP to install the ERP-type package SAP/R3. The field work included surveying and interviewing experienced professionals such as IS executives, IS developers, IS project leaders and end-user project leaders. A triangulation methodological approach allowed combining quantitative and interpretive analyses, obtaining convergent and complementing results. A statistical analysis, using Partial Least Squares (PLS), was carried out followed by a hermeneutical/dialectical analysis. Results confirmed a major finding: in problematic cases, paradoxically, the origins of IS rejection reasons argued by the EU, at a high degree, were usually traceable to the EUR and themselves. The results also confirmed the prevalence of cognitive, behavioral and political factors in these organizations as well as the high risk of taking for granted the presence and quality of those factors demanded from the EUR. The statistical validation of the proposed model revealed the construct EUR knowledge as the main latent variable, with its items exerting a major influence on IS quality and success. Another finding, in contradiction with that of other studies, proved knowledge of information technology (IT) aspects to be irrelevant. The payroll and the human resources administration IS were the most problematic, as is usually the case in large companies. The main conclusions confirm the EU´s decisive role for IS success and their relationship with the problem, which continues, demanding more research and, from organizations, more attention and preparation. Neglecting human and social factors in organizations as well as their effective planning and management in preparation for ISDP poses serious risks. Despite the limitations of this work, the analyzed problem tends to influence ISDP in a wide range of organizations; regardless of their size or type of IS, thus showing a high degree of generalization. Therefore it is believed that the results, conclusions and suggestions of this research have a high degree of generalization. A detailed checklist comprising key measures is provided for preventive actions. Finally, the factors evaluated can be used to expand the well-known model of DeLone & McLean (2003), by connecting them as latent variables of its independent variables information quality and IS quality.

Categorical Structures in Non-Commutative Measure Theory.

In this paper, we investigate effect algebras and base normed spaces from the categorical point of view. We prove that the category of effect algebras is complete and cocomplete as well as the category of base normed spaces is complete, and discuss the contravariant functor from the category of effect algebras to the category of base normed spaces.

Methodologies to measure and to manage the decarbonisation of road transport: the case of Spain

El sector del transporte por carretera es uno de los principales contribuyentes de consumo de combustible y emisiones de España. Por lo tanto, la evaluación de los impactos ambientales del tráfico rodado es esencial para los programas de mitigación del cambio climático y la eficiencia energética. Sin embargo, uno de los retos en la planificación del transporte y el diseño de políticas consiste en la aplicación de metodologías de evaluación de emisiones consistentes, el diseño de estrategias y la evaluación de su eficacia. Las metodologías existentes de evaluación de las emisiones del transporte por carretera, utilizan diferentes niveles de análisis y períodos. Sin embargo, estos análisis son puntuales y no existe una continuidad en el análisis de diferentes estrategias o políticas. Esta tesis doctoral proporciona conocimientos y herramientas para el análisis de las políticas destinadas a reducir las emisiones de tráfico, tomando España como caso de estudio. La investigación se estructura en dos partes: i) el desarrollo y aplicación de metodologías para el análisis de factores y políticas que contribuyen en la evolución de las emisiones GEI del transporte por carretera en España; desde una perspectiva nacional; y ii) el desarrollo y aplicación de un marco metodológico para estimar las emisiones del tráfico interurbano y de evaluar estrategias centradas en la operación del tráfico y en la infraestructura. En resumen, esta tesis demuestra la idoneidad de utilizar diferentes herramientas para analizar las emisiones de tráfico desde diferentes puntos de vista. Desde el diseño de políticas de mitigación y eficiencia energética a nivel nacional, a estrategias centradas en la operación del tráfico interurbano y la infraestructura. Road transport is one of the major contributors to fuel consumption and emissions in Spain. Consequently, assessing the environmental impacts of road traffic is essential for climate change mitigation and energy efficiency programs. However, one of the key challenges of policy makers and transport planners consists of implementing consistent assessment emissions methodologies, applying mitigation strategies, and knowing their effectiveness. Current state-of-the-art emissions assessment methodologies estimate emissions from different levels and periods, using different approaches. Nevertheless, these studies are timely and they usually take different methodologies for analysing different strategies or policies, regardless of the assessment as a whole. This doctoral thesis provides knowledge and methodologies for analysing policies designed to reduce road traffic emissions, using the case study of Spain. The research procedure consists of two main scopes: i) the development and application of methodologies for analysing key factors and policies driving the GHG emissions of road transport in Spain; from a national perspective; and ii) the development and application of a road traffic emissions model for assessing operational and infrastructure strategies of the interurban road network at segment level. In summary, this thesis demonstrates the appropriateness to use different tools to analyse road traffic emissions at different levels: from appropriate nationwide mitigation and energy efficiency policies, to strategies focused on the operation of interurban traffic and infrastructure.

A CO2-saving-based methodology to measure the impact of the SUMP in European Cities: Application to the City of Burgos

Urban mobility in Europe is always a responsibility of the municipalities which propose measures to reduce CO2 emissions in terms of mobility aimed at reducing individual private transport (car). The European Commission's Action Plan on Urban Mobility calls for an increase in the take-up of Sustainable Urban Mobility Plans in Europe. SUMPs aim to create a sustainable urban transport system. Europe has got some long term initiatives and has been using some evaluation procedures, many of them through European projects. Nevertheless, the weak point with the SUMPs in Spain, has been the lack of concern about the evaluation and the effectiveness of the measures implemented in a SUMP. For this reason, it is difficult to know exactly whether or not the SUMPs have positively influenced in the modal split of the cities, and its contribution to reduce CO2 levels. The case of the City of Burgos is a very illustrative example as it developed a CiViTAS project during the years 2005-2009, with a total investment of 6M?. The results have been considered as ?very successful? even at European level. The modal split has changed considerably for better, The cost-effectiveness ratio of the SUMP in the city can be measured with the CO2 ton saved, specifically 36 ? per CO2 ton saved, which is fully satisfactory and in line with calculations from other European researchers. Additionally, the authors propose a single formula to measure the effectiveness of the activities developed under the umbrella of a SUMP.

Designing new cereal cultivars as an adaptation measure using crop model ensembles

To date, crop models have been little used for characterising the types of cultivars suited to a changed climate, though simulations of altered management (e.g. sowing) are often reported. However, in neither case are model uncertainties evaluated at the same time.

Sobre la forma de garantizar la trazabilidad metrológica en los sistemas hospitalarios

Dentro del equipamiento que existen en los hospitales, se realizan muy diversas actuaciones para el correcto funcionamiento de los equipos que se destinan, tanto a medir sobre el paciente o para tratamiento sobre estos mismos, el abanico de equipos que existen es muy grande, sin contar con los que directamente se instalan o, más correctamente, se implantan en el paciente. Los hospitales tienen establecidas pautas de mantenimiento tanto correctivo como preventivo, también de verificación relativa a seguridad y, en algunos casos, acciones que van destinadas a comprobar las magnitudes en los equipos. Esto último no es lo normal, de hecho, en muchos casos, la mayoría, se desconoce cómo poder comprobar que las magnitudes de un equipo se pueden trazar a un patrón de medida nacional. La investigación se ha desarrollado para determinar, siendo algo que esta patente hasta en la normalización ISO, que no existen para muchos equipos principios establecidos para garantizar la trazabilidad metrológica da las magnitudes físicas en las que trabaja durante su vida útil. Debido a la amplitud de este campo, el desarrollo de investigación se ha llevado en un formato piramidal, desde las necesidades para poder llegar a un estudio concreto de equipos concretos (Termómetros Clínicos, Tensiómetros, Ultrasonidos y Onda Corta). Para llegar a estos se ha realizado un estudio de cómo se encuentra la trazabilidad metrológica en todo el espectro, desde la gestión hasta llegar a casos particulares. Estudiando la gran cantidad de documentación existente y llegando a determinar el campo de trabajo en la metrología hospitalaria, clasificando los equipos y determinando como se encuentran definidos los métodos que llevan a realidad la trazabilidad metrológica, en la normalización. Un grupo no muy trabajado de los equipos electromédicos son los que se encuentran dentro de los tratamientos de Rehabilitación de traumatología, siendo equipos de uso muy habitual en los centros de salud para las lesiones musculares y óseas. A este asunto se ha dedicado un esfuerzo extra, con un reporte histórico de su origen y en qué punto se encuentran ahora. Se han estudiado dentro de estos equipos los de tratamiento de ultrasonidos, de diatermia y onda corta, que son los más representativos de los equipos destinados a electro terapia, pero hay que tener en cuenta que hay campos que se han mencionado globalmente de la rehabilitación, como son la terapia o la biomecánica, de forma similar a otras tecnologías sanitarias de otras especialidades (radiología o análisis clínico). Hay, también, dentro de la terapia, todos esos tratamientos propios de gimnasio, como son poleas, pesas, mesas de masajes, balones, etc… Que su metrología es sencilla, son equipos que existen medios de comprobación de las magnitudes que utilizan por la existencia en otras actividades de la industria (balanzas, pesas, etc). La investigación realizada ha pretendido evaluar todo el global y llegar a casos concretos para determinar cómo está la situación. Llegando a desarrollar una clasificación de equipos y de normas, que permiten vislumbrar las necesidades metrológicas y permitiría establecer una Gestión de la Trazabilidad Metrológica, concluyendo en el estudio para los equipos que se han mencionado. ABSTRACT Within the equipment that exist in the hospitals, there are very diverse performances for the correct operation of the equipment that is intended both to measure on the patient or for treatment on these same, the range of equipment available is very large, without which directly are installed or, more correctly, are implanted in the patient. The hospitals have established patterns of maintenance both corrective and preventive, also of verification of security and, in some cases, actions which are intended to check the magnitudes in the equipment. This last is not normal, in fact, in many cases, the majority, it is not known as to be able to check that the magnitudes of a computer can be traced to a pattern of national measure. The research has been developed to determine, is something that this patent up to the International Organization for Standardization (ISO), that do not exist for many teams established principles to ensure the metrological traceability gives the physical quantities in which they work during its useful life. Due to the breadth of this field, the development of research has been conducted in a pyramid format, from the needs to be able to reach a specific study of specific equipment (Clinical Thermometers, Tensiometers, Ultrasound, and Short Wave). To reach theme, has been carried out a study of how is the metrological traceability across the entire spectrum, from the management to individuals cases. Considering the large amount of existing documentation and arriving to determine the labor camp in the metrology hospital, sorting equipment and determining how are defined the methods that lead to reality the metrological traceability, in the standardization. A group not too worked for medical electrical equipment are found within the rehabilitation treatment of traumatology, being equipment of very common use in the health centers for muscle injuries and bone. In this matter has been dedicated an extra effort, with a report history of its origin and where they are now. We have studied within these teams about the treatment of ultrasound, diathermy, short wave, which are the most representative of the equipment that is destined to electro therapy, but it must be borne in mind that there are fields that have been mentioned globally of rehabilitation, as are the therapy or the biomechanics, similar to other health technologies from other specialties (radiology or clinical analysis). There is, also, within the therapy, all these treatments own gym, such as pulleys, weights, tables of massages, balls, etc… that its metrology is simple, are computers that there are means of verification of the magnitudes that used by the existence in other activities of the industry (scales, weights, etc). The research carried out has tried to assess the entire global and reach specific cases to determine the situation as it is. Arriving in the development of a classification of equipment and standards, which give us a glimpse of the metrological needs and establish a Management of the Metrological Traceability, concluding in the study for computers that have been mentioned.

Relevance of Higher Education. How to measure it? The case of masters of engineering in Peru

Existing evaluation models for higher education have, mainly, accreditation purposes, and evaluate the efficiency of training programs, that is to say, the degree of suitability between the educational results and the objectives of the program. However, it is not guaranteed that those objectives adequate to the needs and real interests of students and stakeholders, that is to say, they do not assess the relevance of the programs, a very important aspect in developing countries. From the review of experiences, this paper proposes a model for evaluating the relevance of engineering masters program, and applies it to the case of a master?s degree at the University of Piura, Peru. We conclude that the proposed model is applicable to other masters program, offers an objective way for determining is a training program keep being relevant, and identifies improvement opportunities