Motorização de fármacos na água bruta e na água para consumo humano por cromatolografia líquida de ultra eficiência associada à espectrometria de massa tandem

Tese de doutoramento, Farmácia (Bromatologia), Universidade de Lisboa, Faculdade de Farmácia, 2014

Avaliação de fatores determinantes e da taxa de incidência da condição DFD (Dark, Firm, Dry) na carne de bovinos abatidos no matadouro da ilha Terceira

Dissertação de Mestrado, Engenharia Zootécnica, 13 de Junho de 2014, Universidade dos Açores.

Projecto suspensão formula student

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Projecto da suspensão do VEECO RT

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Deteção eletroquímica da norfloxacina e trimetoprim em amostras de urina utilizando polímero molecularmente impresso modificado e grafeno

A norfloxacina e o trimetoprim são dois antibióticos antibacterianos usados para o tratamento de infeções urinárias, intestinais e respiratórias. A maioria dos fármacos exige uma dosagem que garanta os níveis de segurança e eficácia de atuação. A necessidade de dosear os medicamentos e os seus metabolitos é assim um controlo imperioso e em muitos casos regular no tratamento de um paciente. Neste trabalho desenvolveram-se dois sensores eletroquímicos para a deteção da norfloxacina (NFX) e do trimetoprim (TMP), usando como superfície de suporte o carbono vítreo. A busca de novos materiais que conferiram maior seletividade e sensibilidade aos sistemas de deteção e por outro lado apresentem menores riscos para o paciente quando usados em dispositivos que permitam uma análise point-of-care, é especialmente importante e pode ser uma parte crucial do processo de decisão clínica. Assim, os polímeros molecularmente impresos enquadram-se nesse perfil e o seu uso tem vindo a ser cada vez mais avaliado. A impressão molecular é uma tecnologia capaz de produzir polímeros que incorporam as moléculas do analito e que após remoção por solventes específicos, permitem dotá-los de locais específicos de reconhecimento estereoquímico. A seleção do pirrol como polímero molecularmente impresso (MIP) permitiu construir com sucesso os sensores para doseamento dos antibióticos. A fim de aumentar a sensibilidade do método incorporou-se grafeno na superfície do elétrodo. Este material tem vindo a ser largamente utilizado devido às suas propriedades: estrutura molecular, condutividade elétrica e aumento da superfície são algumas das características que mais despertam o interesse para a sua aplicação neste projeto. Os sensores desenvolvidos foram incorporados em sistemas eletroquímicos. Os métodos voltamétricos aplicados foram a voltametria cíclica, a voltametria de onda quadrada e ainda a impedância. As condições de análise foram otimizadas no que respeita à polimerização do pirrol (concentração do polímero, número de ciclos de eletropolimerização e respetivos potenciais aplicados, tempo de incubação, solvente de remoção do analito), ao pH da solução do fármaco, à gama de concentrações dos antibióticos e aos parâmetros voltamétricos dos métodos de análise. Para cada um dos antibióticos um elétrodo não-impresso foi também preparado, usando o procedimento de polimerização mas sem a presença da molécula do analito, e foi usado como controlo. O sensor desenvolvido para o trimetoprim foi usado no doseamento do fármaco em amostras de urina. As amostras foram analisadas sem qualquer diluição, apenas foram centrifugadas para remoção de proteínas e algum interferente. Os sensores construídos apresentaram comportamento linear na gama de concentrações entre 102 e 107 mol/L. Os resultados mostram boa precisão (desvios padrão inferiores a 11%) e os limites de deteção foram de 8,317 e 1,307 mol/L para a norfloxacina e o trimetoprim, respetivamente. Para validação do método foram ainda efetuados ensaios de recuperação tendo obtido valores superiores a 94%.

Biosensor based on multi-walled carbon nanotubes paste electrode modified with laccase for pirimicarb pesticide quantification

This study focused on the development of a sensitive enzymatic biosensor for the determination of pirimicarb pesticide based on the immobilization of laccase on composite carbon paste electrodes. Multi- walled carbon nanotubes(MWCNTs)paste electrode modified by dispersion of laccase(3%,w/w) within the optimum composite matrix(60:40%,w/w,MWCNTs and paraffin binder)showed the best performance, with excellent electron transfer kinetic and catalytic effects related to the redox process of the substrate4- aminophenol. No metal or anti-interference membrane was added. Based on the inhibition of laccase activity, pirimicarb can be determined in the range 9.90 ×10- 7 to 1.15 ×10- 5 molL 1 using 4- aminophenol as substrate at the optimum pH of 5.0, with acceptable repeatability and reproducibility (relative standard deviations lower than 5%).The limit of detection obtained was 1.8 × 10-7 molL 1 (0.04 mgkg 1 on a fresh weight vegetable basis).The high activity and catalytic properties of the laccase- based biosensor are retained during ca. one month. The optimized electroanalytical protocol coupled to the QuEChERS methodology were applied to tomato and lettuce samples spiked at three levels; recoveries ranging from 91.0±0.1% to 101.0 ± 0.3% were attained. No significant effects in the pirimicarb electro- analysis were observed by the presence of pro-vitamin A, vitamins B1 and C,and glucose in the vegetable extracts. The proposed biosensor- based pesticide residue methodology fulfills all requisites to be used in implementation of food safety programs.

Teor crítico de cloretos para iniciação da corrosão do aço no betão: influência do estado de superfície da armadura

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica - Processos Químicos

Sulfadiazine-selective determination in aquaculture environment: Selective potentiometric transduction by neutral or charged ionophores

Solid-contact sensors for the selective screening of sulfadiazine (SDZ) in aquaculture waters are reported. Sensor surfaces were made from PVC membranes doped with tetraphenylporphyrin-manganese(III) chloride, α-cyclodextrin, β-cyclodextrin, or γ-cyclodextrin ionophores that were dispersed in plasticizer. Some membranes also presented a positive or a negatively charged additive. Phorphyrin-based sensors relied on a charged carrier mechanism. They exhibited a near-Nernstian response with slopes of 52 mV decade−1 and detection limits of 3.91 × 10−5 mol L−1. The addition of cationic lipophilic compounds to the membrane originated Nernstian behaviours, with slopes ranging 59.7–62.0 mV decade−1 and wider linear ranges. Cyclodextrin-based sensors acted as neutral carriers. In general, sensors with positively charged additives showed an improved potentiometric performance when compared to those without additive. Some SDZ selective membranes displayed higher slopes and extended linear concentration ranges with an increasing amount of additive (always <100% ionophore). The sensors were independent from the pH of test solutions within 2–7. The sensors displayed fast response, always <15 s. In general, a good discriminating ability was found in real sample environment. The sensors were successfully applied to the fast screening of SDZ in real waters samples from aquaculture fish farms. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in locus measurements of sulfadiazine or parent-drugs.

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

Relatório de estágio no departamento central de investigação e acção penal

The means of obtaining evidence, the amount of evidence obtained, the number of defendants related to each criminal case and the gravity of the crimes for which the magistrates of the Department are holders of penal action, define its real importance to the Rule of Law. I have deeply studied the subject of the institution of hierarchical intervention required by the assistant and the application of an opening statement by the defendant, starting from a hypothetical case, provided when the query of an investigation with the subject of the crime of active corruption, where this institution was called as a reaction to the archiving dispatch delivered by the Public Ministry. I have study about the implementation of the institution of provisional suspension of the process, specifically in the scope of fiscal criminality, analyzing the effective satisfaction of the purposes of the sentences in two slopes: general prevention and special prevention. I went for my first time to a Central Court of Criminal Instruction, where I attended the measures of inquiry and instructive debate of a process that culminated with the prosecution and pronunciation of the defendants. In addition to this criminal experience, I have deepened and consolidated the academic knowledge with the study of various criminal cases from various fields in the scope of criminality investigated by the Department. I could therefore check the basis of procedural delays, regarding to our legal system, especially in this type of crime, raising issues that I analyzed and discussed, always in a critical and academic way. I had the opportunity to attend and witness a seminar in the Lisbon Directorate of Finance as well of entering the Centre for Judicial Studies to attend a conference on the International Anti-Corruption Day. Focus on the investigatory importance of the international judicial cooperation, through the various organs, with special interest to EUROJUST. I comprehended the organization and functioning of these communitarian organs and means of communication of procedural acts, in particular, the rogatory letters and european arrest warrants. This involvement is motivated by the moratorium factor of the investigations where rogatory letters are necessary for the acquisition of evidence or information relevant to the good continuation of the process. For this reason the judicial cooperation through the relevant communitarian organs, translates a streamlined response between the competent judicial authorities of the Member States, through the National Member that integrates EUROJUST. This report aims to highlight some of the difficulties and procedural issues that Public Prosecutors of DCIAP and criminal police bodies that assist them, face in combating violent and organized crime, of national and transnational nature, of particular complexity, according to the specifics of criminal types.

Modeling reaction kinetics and mass transfer in ozonation in water solutions

This dissertation is based on four articles dealing with modeling of ozonation. The literature part of this considers some models for hydrodynamics in bubble column simulation. A literature review of methods for obtaining mass transfer coefficients is presented. The methods presented to obtain mass transfer are general models and can be applied to any gas-liquid system. Ozonation reaction models and methods for obtaining stoichiometric coefficients and reaction rate coefficients for ozonation reactions are discussed in the final section of the literature part. In the first article, ozone gas-liquid mass transfer into water in a bubble column was investigated for different pH values. A more general method for estimation of mass transfer and Henry’s coefficient was developed from the Beltrán method. The ozone volumetric mass transfer coefficient and the Henry’s coefficient were determined simultaneously by parameter estimation using a nonlinear optimization method. A minor dependence of the Henry’s law constant on pH was detected at the pH range 4 - 9. In the second article, a new method using the axial dispersion model for estimation of ozone self-decomposition kinetics in a semi-batch bubble column reactor was developed. The reaction rate coefficients for literature equations of ozone decomposition and the gas phase dispersion coefficient were estimated and compared with the literature data. The reaction order in the pH range 7-10 with respect to ozone 1.12 and 0.51 the hydroxyl ion were obtained, which is in good agreement with literature. The model parameters were determined by parameter estimation using a nonlinear optimization method. Sensitivity analysis was conducted using object function method to obtain information about the reliability and identifiability of the estimated parameters. In the third article, the reaction rate coefficients and the stoichiometric coefficients in the reaction of ozone with the model component p-nitrophenol were estimated at low pH of water using nonlinear optimization. A novel method for estimation of multireaction model parameters in ozonation was developed. In this method the concentration of unknown intermediate compounds is presented as a residual COD (chemical oxygen demand) calculated from the measured COD and the theoretical COD for the known species. The decomposition rate of p-nitrophenol on the pathway producing hydroquinone was found to be about two times faster than the p-nitrophenol decomposition rate on the pathway producing 4- nitrocatechol. In the fourth article, the reaction kinetics of p-nitrophenol ozonation was studied in a bubble column at pH 2. Using the new reaction kinetic model presented in the previous article, the reaction kinetic parameters, rate coefficients, and stoichiometric coefficients as well as the mass transfer coefficient were estimated with nonlinear estimation. The decomposition rate of pnitrophenol was found to be equal both on the pathway producing hydroquinone and on the path way producing 4-nitrocathecol. Comparison of the rate coefficients with the case at initial pH 5 indicates that the p-nitrophenol degradation producing 4- nitrocathecol is more selective towards molecular ozone than the reaction producing hydroquinone. The identifiability and reliability of the estimated parameters were analyzed with the Marcov chain Monte Carlo (MCMC) method. @All rights reserved. No part of the publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the author.

Syntrophic relationships between algae and bacteria in a fresh-water stream and in culture /

Interactions between freshwater algae and bacteria were examined in a natural stream habitat and a laboratory model. Field observations provided circumstantial evidence, in statistical correlation for syntrophy between the microbial populations. This relation is probably subject to control by the temperature and pH of the aquatic environment. Several species of a pond community were isolated in axenic culture and tests were performed to determine the nature of mixed species interactions. Isolation procedures and field studies indicated that selected strains of Chlorella and Azotobacter were closely associated in their natural habitat. With the suspected controlling parameters, pH and temperature, held constant, mixed cultures of algae and bacteria were compared to axenic cultures of the same organisms, and a mutual stimulation of growth was observed. A mixed pure culture apparatus was designed in this laboratory to study the algal-bacterial interaction and to test the hypothesis that such an interaction may take place through a diffusable substance or through certain medium-borne conditions, Azotobacter was found to take up a Chlorella-produced exudate, to stimulate protein synthesis, to enhance chlorophyll production and to cause a numerical increase in the interacting Chlorella population. It is not clear whether control is at the environmental, cellular or genetic level in these mixed population interactions. Experimental observations in the model system, taken with field correlations allow one to state that there may be a direct relationship governing the population fluctuations of these two organisms in their natural stream surroundings.

Arsenic and germanium determination by hydride generation in the D.C. plasma optical emission spectrometer

Modifications to the commercial hydride generator, manufactured by Spectrametrics, resulted in improved operating procedure and enhancement of the arsenic and germanium signals. Experiments with arsenic(III) and arsenic(V) showed that identical reiults could be produced from both oxidation states. However, since arsenic(V) is reduced more slowly than arsenic(III), peak areas and not peak heights must be measured when the arsine is immediately stripped from the system (approximately 5 seconds reaction). When the reduction is allowed to proceed for 20 seconds before the arsine is stripped, peak heights may be used. For a 200 ng/mL solution, the relative standard deviation is 2.8% for As(III) and 3.8% for As(V). The detection limit for arsenic using the modified system is 0.50 ng/mL. Studies performed on As(V) standards show that the interferences from 1000 mg/L of nickel(II), cobalt(II), iron(III), copper(II), cadmium(II), and zinc(II) can be eliminated with the aid of 5 M Hel and 3% L-cystine. Conditions for the reduction of germanium to the corresponding hydride were investigated. The effect of different concentrations of HCl on the reduction of germanium to the covalent hydride in aqueous media by means of NaBH 4 solutions was assessed. Results show that the best response is accomplished at a pH of 1.7. The use of buffer solutions was similarly characterized. In both cases, results showed that the element is best reduced when the final pH of the solution after reaction is almost neutral. In addition, a more sensitive method, which includes the use of (NH4)2S208' has been developed. A 20% increase in the germanium signal is registered when compared to the signal achieved with Hel alone. Moreover, under these conditions, reduction of germanium could be accomplished, even when the solution's pH is neutral. For a 100 ng/mL germanium standard the rsd is 3%. The detection limit for germanium in 0.05 M Hel medium (pH 1.7) is 0.10 ng/mL and 0.09 ng/mL when ammonium persulphate is used in conjunction with Hel. Interferences from 1000 mg/L of iron(III), copper(II), cobalt(II), nickel(II), cadmium(II), lead(II), mercury(II), aluminum(III), tin(IV), arsenic(III), arsenic(V) and zinc(II) were studied and characterized. In this regard, the use of (NH4)ZS20S and Hel at a pH of 1.7 proved to be a successful mixture in the sbppression of the interferences caused by iron, copper, aluminum, tin, lead, and arsenic. The method was applied to the determination of germanium in cherts and iron ores. In addition, experiments with tin(IV) showed that a 15% increase in the tin signal can be accomplished in the presence of 1 mL of (NH4)2S20S 10% (m/V).

Développement de papier bioactif par couchage à grande échelle d’enzymes immobilisées par microencapsulation

L’objectif principal de cette recherche est de contribuer au développement de biocapteurs commerciaux utilisant des surfaces de papier comme matrices d’immobilisation, capables de produire un signal colorimétrique perceptible dans les limites sensorielles humaines. Ce type de biocapteur, appelé papier bioactif, pourrait servir par exemple à la détection de substances toxiques ou d’organismes pathogènes. Pour atteindre l’objectif énoncé, ce travail propose l’utilisation de systèmes enzymatiques microencapsulés couchés sur papier. Les enzymes sont des catalyseurs biologiques dotés d’une haute sélectivité, et capables d'accélérer la vitesse de certaines réactions chimiques spécifiques jusqu’à des millions des fois. Les enzymes sont toutefois des substances très sensibles qui perdent facilement leur fonctionnalité, raison pour laquelle il faut les protéger des conditions qui peuvent les endommager. La microencapsulation est une technique qui permet de protéger les enzymes sans les isoler totalement de leur environnement. Elle consiste à emprisonner les enzymes dans une sphère poreuse de taille micrométrique, faite de polymère, qui empêche l’enzyme de s’echapper, mais qui permet la diffusion de substrats à l'intérieur. La microencapsulation utilisée est réalisée à partir d’une émulsion contenant un polymère dissous dans une phase aqueuse avec l’enzyme désirée. Un agent réticulant est ensuite ajouté pour provoquer la formation d'un réseau polymérique à la paroi des gouttelettes d'eau dans l'émulsion. Le polymère ainsi réticulé se solidifie en enfermant l’enzyme à l'intérieur de la capsule. Par la suite, les capsules enzymatiques sont utilisées pour donner au papier les propriétés de biocapteur. Afin d'immobiliser les capsules et l'enzyme sur le papier, une méthode courante dans l’industrie du papier connu sous le nom de couchage à lame est utilisée. Pour ce faire, les microcapsules sont mélangées avec une sauce de couchage qui sera appliquée sur des feuilles de papier. Les paramètres de viscosité i de la sauce et ceux du couchage ont été optimisés afin d'obtenir un couchage uniforme répondant aux normes de l'industrie. Les papiers bioactifs obtenus seront d'abord étudiés pour évaluer si les enzymes sont toujours actives après les traitements appliqués; en effet, tel que mentionné ci-dessus, les enzymes sont des substances très sensibles. Une enzyme très étudiée et qui permet une évaluation facile de son activité, connue sous le nom de laccase, a été utilisée. L'activité enzymatique de la laccase a été évaluée à l’aide des techniques analytiques existantes ou en proposant de nouvelles techniques d’analyse développées dans le laboratoire du groupe Rochefort. Les résultats obtenus démontrent la possibilité d’inclure des systèmes enzymatiques microencapsulés sur papier par couchage à lame, et ce, en utilisant des paramètres à grande échelle, c’est à dire des surfaces de papier de 0.75 x 3 m2 modifiées à des vitesses qui vont jusqu’à 800 m/min. Les biocapteurs ont retenu leur activité malgré un séchage par évaporation de l’eau à l’aide d’une lampe IR de 36 kW. La microencapsulation s’avère une technique efficace pour accroître la stabilité d’entreposage du biocapteur et sa résistance à l’exposition au NaN3, qui est un inhibiteur connu de ce biocapteur. Ce projet de recherche fait partie d'un effort national visant à développer et à mettre sur le marché des papiers bioactifs; il est soutenu par Sentinel, un réseau de recherche du CRSNG.

Relationship between monitored elements and prescribed ventilator setting modifications in critically ill children

Les pédiatres intensivistes ont plusieurs éléments disponibles pour guider leurs décisions par rapport à la ventilation mécanique. Par contre, aucune étude prospective ne décrit les éléments auxquels les intensivistes se réfèrent pour modifier les paramètres du respirateur. Objectifs : Décrire la pratique actuelle de la modification des paramètres du respirateur aux soins intensifs du CHU Sainte-Justine, un hôpital pédiatrique tertiaire. Hypothèse : 80% des modifications des paramètres du respirateur influant sur l’épuration du CO2 sont liées à l’analyse de la PCO2 ou du pH et 80% des modifications des paramètres d’oxygénation sont liés à l’analyse de l’oxymétrie de pouls. Méthodes : En se servant d’un logiciel de recueil de données, les soignants ont enregistré un critère de décision primaire et tous les critères de décision secondaires menant à chaque modification de paramètre du respirateur au moment même de la modification. Résultats : Parmi les 194 modifications des paramètres du respirateur influant sur l’épuration du CO2, faites chez vingts patients, 42.3% ±7.0% avaient pour critère primaire la PCO2 ou le pH sanguin. Parmi les 41 modifications de la pression expiratoire positive et les 813 modifications de la fraction d’oxygène inspirée, 34.1% ±14.5% et 84.5% ±2.5% avaient pour critère primaire l’oxymétrie de pouls, respectivement. Conclusion : Les médecins surestiment le rôle de la PCO2 et du pH sanguins et sousestiment le rôle d’autres critères de décision dans la gestion de la ventilation mécanique. L’amélioration de notre compréhension de la pratique courante devrait aider à l’éboration des systèmes d’aide à la décision clinique en assistance respiratoire.