GB virus C/Hepatitis G virus and other putative hepatitis non A-E viruses

The identification of the major agents causing human hepatitis (Hepatitis A, B, C, D and E Viruses) was achieved during the last 30 years. These viruses are responsible for the vast majority of human viral hepatitis cases, but there are still some cases epidemiologically related to infectious agents without any evidence of infection with known virus, designated as hepatitis non A - E. Those cases are considered to be associated with at least three different viruses: 1 - Hepatitis B Virus mutants expressing its surface antigen (HBsAg) with altered epitopes or in low quantities; 2 - Another virus probably associated with enteral transmitted non A-E hepatitis, called Hepatitis F Virus. Still more studies are necessary to better characterize this agent; 3 - Hepatitis G Virus or GB virus C, recently identified throughout the world (including Brazil) as a Flavivirus responsible for about 10% of parenteral transmitted hepatitis non A-E. Probably still other unknown viruses are responsible for human hepatitis cases without evidence of infection by any of these viruses, that could be called as non A-G hepatitis.

Differentiation of pathogenic and non-pathogenic leptospires by means of the polymerase chain reaction

A polymerase chain reaction was carried out to detect pathogenic leptospires isolated from animals and humans in Argentina. A double set of primers (G1/G2, B64-I/B64-II), described before, were used to amplify by PCR a DNA fragment from serogroups belonging to Leptospira interrogans but did not allow to detect saprophytic strains isolated from soil and water (L. biflexa). This fact represents an advantage since it makes possible the differentiation of pathogenic from non-pathogenic leptospires in cultures. The sensitivity of this assay has been determined, allowing to detect just only 10 leptospires in the reaction tube. Those sets of primers generated either a 285 bp or 360 bp fragment, depending on the pathogenic strain

A case report of vascular catheter-associated bacteremia caused by Mycobacterium tuberculosis in a non-immunosuppressed patient

Mycobacterium tuberculosis was isolated from a central venous catheter in a non-immunosuppressed patient with systemic tuberculosis. This case report represents a very uncommon form of isolation of Mycobacterium tuberculosis. A total improvement was obtained after treatment.

"In vivo" and "in vitro" demonstration of hemoglobin C crystals in non-splenectomized patients

We studied 12 Hb C carriers: 4 homozygotic Hb CC and 8 heterozygotic. We observed the presence of free crystals in the peripheral blood of the homozygotes but in none of the heterozygotes. However, after incubation with 3% NaCl we were able to detect crystals in the heterozygotes (Hb AC and Hb SC), and in the homozygotes (Hb CC). In patient 04 (P04) less crystals formation occurred due to inhibition of the process by the presence of elevated levels of Hb F (12.2%). All the homozygotic patients had a splenomegaly of 3 to 6 fingerbreadths.We believe that the spleen wears off with time, thus allowing the passage of crystals to the peripheral blood. This finding might be associated with splenic insufficiency without a reduction of its dimensions. Finally, the finding of crystals in the peripheral blood permitted the diagnosis of Hb C obviating the need for electrophoresis.

Genetic variation between susceptible and non-susceptible snails to Schistosoma infection using random amplified polymorphic DNA analysis (RAPDs)

Susceptibility of snails to infection by certain trematodes and their suitability as hosts for continued development has been a bewildering problem in host-parasite relationships. The present work emphasizes our interest in snail genetics to determine what genes or gene products are specifically responsible for susceptibility of snails to infection. High molecular weight DNA was extracted from both susceptible and non-susceptible snails within the same species Biomphalaria tenagophila. RAPD was undertaken to distinguish between the two types of snails. Random primers (10 mers) were used to amplify the extracted DNA by the polymerase chain reaction (PCR) followed by polyacrylamide gel electrophoresis (PAGE) and silver staining. The results suggest that RAPD represents an efficient means of genome comparison, since many molecular markers were detected as genetic variations between susceptible and non-susceptible snails.

Parasitological and immunological diagnoses of strongyloidiasis in immunocompromised and non-immunocompromised children at Uberlândia, state of Minas Gerais, Brazil

Parasitological and immunological diagnoses were part of a study conducted among 151 children, 83 immunocompromised (IC) and 68 non-immunocompromised (non-IC) aged from zero to 12, seen at the University Hospital, Universidade Federal de Uberlândia, State of Minas Gerais, Brazil, from February, 1996, to June, 1998. Three fecal samples from each child were analyzed for the parasitological diagnosis by Baermann-Moraes and Lutz methods. The immunological diagnosis to detect IgG and IgM antibodies was carried out by the indirect immunofluorescence antibody test (IFAT) with cryo-microtome sections of Strongyloides stercoralis and Strongyloides ratti larvae as antigens and by the ELISA test with an alkaline extract of S. ratti as the antigens. Of the 151 children 5 (3.31%) were infected with larvae of S. stercoralis (2 cases IC, 2.41%, and 3 cases non-IC, 4.41%). The IFAT-IgG detected 7 (8.43%) serum samples positive among IC, and 2 (2.94%) cases among non-IC. The ELISA-IgG test detected 10 (12.05%) serum samples positive among IC, and 1 (1.47%) case among non-IC. The IFAT-IgM detected 6 (7.22%) positive cases among IC, and 3 (4.41%) cases among non-IC. ELISA-IgM test detected 10 (12.05%) positive cases among IC, and 3 (4.41%) cases among non-IC. It was concluded that the immunological tests can help in the diagnosis of strongyloidiasis in immunocompromised children.

FROM NON-PLACE TO PLACE: A STUDY OF EUROPEAN PUBLIC SPACE AS A SPACE OF IDENTITY

Master Erasmus Mundus Crossways in European Humanities

Fibrotic sequelae in pulmonary paracoccidioidomycosis: histopathological aspects in BALB/c mice infected with viable and non-viable Paracoccidioides brasiliensis propagules

Patients with paracoccidioidomycosis often present pulmonary fibrosis and exhibit important respiratory limitations. Based on an already established animal model, the contribution of viable and non-viable P. brasiliensis propagules to the development of fibrosis was investigated. BALB/c male mice, 4-6 weeks old were inoculated intranasally either with 4x10(6 )viable conidia (Group I), or 6.5x10(6) fragmented yeast cells (Group II). Control animals received PBS. Six mice per period were sacrificed at 24, 48, 72h (initial) and 1, 2, 4, 8, 12 and 16 weeks post-challenge (late). Paraffin embedded lungs were sectioned and stained with H&E, trichromic (Masson), reticulin and Grocott´s. During the initial period PMNs influx was important in both groups and acute inflammation involving 34% to 45% of the lungs was noticed. Later on, mononuclear cells predominated. In group I, the inflammation progressed and granulomas were formed and by the 12th week they fussed and became loose. Thick collagen I fibers were observed in 66.6% and 83.3% of the animals at 8 and 12 weeks, respectively. Collagen III, thick fibers became apparent in some animals at 4weeks and by 12 weeks, 83% of them exhibited alterations in the organization and thickness of these elements. In group II mice, this pattern was different with stepwise decrease in the number of inflammatory foci and lack of granulomas. Although initially most animals in this group had minor alterations in thin collagen I fibers, they disappeared by the 4th week. Results indicate that tissue response to fragmented yeast cells was transitory while viable conidia evoked a progressive inflammatory reaction leading to granuloma formation and to excess production and/or disarrangement of collagens I and III; the latter led to fibrosis.

Is Demodex really non-pathogenic?

Although usually considered a non-pathogenic parasite in parasitological textbooks, Demodex folliculorum has been implicated as a causative agent for some dermatological conditions, such as rosacea-like eruptions and some types of blepharitis. Several anecdotal reports have demonstrated unequivocal tissue damage directly related to the presence of the parasite. However, this seems to be exceedingly rare, in contrast with the marked prevalence of this infestation. We have had the opportunity to observe one of such cases. A 38-year-old woman presented with rosacea-like papular lesions in her right cheek. Histopathological examination revealed granulomatous dermal inflammation with a well-preserved mite phagocytized by a multinucleated giant cell. This finding may be taken as an evidence for the pathogenicity of the parasite, inasmuch as it does not explain how such a common parasite is able to produce such a rare disease.

Archaeological roman glasses: comparative characterisation by non-destructive analytical techniques

Dissertation presented in fulfilment of the requirements for the Master’s degree in Conservation and Restoration

Negative non-ground queries in well founded semantics

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Computational Logic

Archaeometallurgical study of artefacts from Castro de Vila Nova de São Pedro (Azambuja, Portugal)

Dissertação para obtenção do Grau de Mestre em Conservação e Restauro

AVTEM NON SVNT RERVM NATVRA. Figurações heteromórficas em mosaicos hispano-romanos

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História da Arte da Antiguidade

Estudo da delaminação em compósitos

As excelentes propriedades mecânicas, associadas ao seu baixo peso, fazem com que os materiais compósitos sejam atualmente dos mais interessantes da nossa sociedade tecnológica. A crescente utilização destes materiais e a excelência dos resultados daí provenientes faz com que estes materiais sejam utilizados em estruturas complexas de responsabilidade, pelo que a sua maquinagem se torna necessária de forma a possibilitar a ligação entre peças. O processo de furação é o mais frequente. O processo de maquinagem de compósitos terá como base os métodos convencionais utilizados nos materiais metálicos. O processo deverá, no entanto, ser convenientemente adaptado, quer a nível de parâmetros, quer a nível de ferramentas a utilizar. As características dos materiais compósitos são bastante particulares pelo que, quando são sujeitos a maquinagem poderão apresentar defeitos tais como delaminação, fissuras intralaminares, arrancamento de fibras ou dano por sobreaquecimento. Para a detecção destes danos, por vezes a inspeção visual não é suficiente, sendo necessário recorrer a processos específicos de análise de danos. Existem já, alguns estudos, cujo âmbito foi a obtenção de furos de qualidade em compósitos, com minimização do dano, não se podendo comparar ainda com a informação existente, no que se refere à maquinagem de materiais metálicos ou ligas metálicas. Desta forma, existe ainda um longo caminho a percorrer, de forma a que o grau de confiança na utilização destes materiais se aproxime aos materiais metálicos. Este trabalho experimental desenvolvido nesta tese assentou essencialmente na furação de placas laminadas e posterior análise dos danos provocados por esta operação. Foi dada especial atenção à medição da delaminação causada pela furação e à resistência mecânica do material após ser maquinado. Os materiais utilizados, para desenvolver este trabalho experimental, foram placas compósitas de carbono/epóxido com duas orientações de fibras diferentes: unidireccionais e em “cross-ply”. Não se conseguiu muita informação, junto do fornecedor, das suas características pelo que se levaram a cabo ensaios que permitiram determinar o seu módulo de elasticidade. Relativamente á sua resistência â tração, como já foi referido, a grande resistência oferecida pelo material, associada às limitações da máquina de ensaios não permitiu chegar a valores conclusivos. Foram usadas três geometrias de ferramenta diferentes: helicoidal, Brad e Step. Os materiais utilizados nas ferramentas, foram o aço rápido (HSS) e o carboneto de tungsténio para as brocas helicoidais de 118º de ângulo de ponta e apenas o carboneto de tungsténio para as brocas Brad e Step. As ferramentas em diamante não foram consideradas neste trabalho, pois, embora sejam reconhecidas as suas boas características para a maquinagem de compósitos, o seu elevado custo não justifica a sua escolha, pelo menos num trabalho académico, como é o caso. As vantagens e desvantagens de cada geometria ou material utilizado foram avaliadas, tanto no que diz respeito à delaminação como á resistência mecânica dos provetes ensaiados. Para a determinação dos valores de delaminação, foi usada a técnica de Raio X. Algum conhecimento já existente relativamente a este processo permitiu definir alguns parâmetros (por exemplo: tempo de exposição das placas ao liquido contrastante), que tornaram acessível o procedimento de obtenção de imagens das placas furadas. Importando estas imagens para um software de desenho (no caso – AutoCad), foi possível medir as áreas delaminadas e chegar a valores para o fator de delaminação de cada furo efetuado. Terminado este processo, todas as placas foram sujeitas a ensaios de esmagamento, de forma a avaliar a forma como os parâmetros de maquinagem afectaram a resistência mecânica do material. De forma resumida, são objetivos deste trabalho: - Caracterizar as condições de corte em materiais compósitos, mais especificamente em fibras de carbono reforçado com matriz epóxida (PRFC); - Caracterização dos danos típicos provocados pela furação destes materiais; - Desenvolvimento de análise não destrutiva (RX) para avaliação dos danos provocados pela furação; - Conhecer modelos existentes com base na mecânica da fratura linear elástica (LEFM); - Definição de conjunto de parâmetros ideais de maquinagem com o fim de minimizar os danos resultantes da mesma, tendo em conta os resultados provenientes dos ensaios de força, da análise não destrutiva e da comparação com modelos de danos existentes e conhecidos.