Effect of nutritional density and season on the performance of young rabbit does before the first mating

The objective was to evaluate the effect of nutritional density and season on the performance of young rabbit does before the first mating. Forty-eight females from the Botucatu Genetic Group were used in each season (warm or cool), starting at the age of 70 days, housed in groups of four per cage up to 119 days, and reared individually from 120 to 140 days of age. The high-density diet was formulated to contain, on a 90% DM basis, 18.4% CP, 16.5% ADF and 2,500 kcal DE kg-1; whereas the low-density diet was formulated to contain 14.7% CP, 24% ADF and 2,000 kcal DE kg-1. The experiment was conducted according to a 2x2 factorial design (two diets x two seasons) with repeated measures (weeks). The high-density diet promoted lower feed intake, higher final weight, and higher daily weight gain, adjusted for constant intake. But these facts alone do not warrant using a high-density diet for growing rabbit does, because it could have a negative impact during the reproductive phase. In the warm season, there was a reduction in feed intake and an improvement in feed efficiency. Along time, however, the mean body weight of does was similar in the two seasons.

Evaluation of Clinical and Inflammatory Markers of Nonalcoholic Fatty Liver Disease in Postmenopausal Women with Metabolic Syndrome

Background: The aim of this study was to assess clinical and inflammatory markers in nonalcoholic fatty liver disease (NAFLD) in postmenopausal women with metabolic syndrome.Methods: This cross-sectional study included 180 Brazilian women (age >= 45 years and amenorrhea >= 12 months). Metabolic syndrome was diagnosed by the presence of at least three of the following indicators: Waist circumference (WC) > 88 cm, triglycerides (TGs) >= 150 mg/dL, high-density lipoprotein (HDL) < 50 mg/dL; blood pressure >= 130/85 mmHg; and glucose >= 100 mg/dL. NAFLD was diagnosed by abdominal ultrasound. Participants were divided into three groups: Metabolic syndrome alone (n = 53); metabolic syndrome + NAFLD (n = 67); or absence of metabolic syndrome or NAFLD (control, n = 60). Clinical, anthropometric, and biochemical variables were quantified. The inflammatory profile included adiponectin, interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-alpha). Data were submitted to statistical analysis using a Tukey test, analysis of variance (ANOVA), chi-squared, Pearson correlation, and logistic regression (odds ratio, OR).Results: Women with metabolic syndrome + NAFLD, abdominal obesity, high glucose, and insulin resistance by HOMA-IR were compared to women with metabolic syndrome alone and controls (P < 0.05). High values of IL-6 and TNF-alpha and low values of adiponectin were observed among women with metabolic syndrome alone or metabolic syndrome + NAFLD when compared to controls (P < 0.05). In multivariate analysis, the variables considered as risk of NAFLD development were: High systolic blood pressure (SBP) [(OR 1.02, 95% confidence interval (CI) 1.0-1.04]; large WC (OR 1.07, 95% CI 1.01-1.13); insulin resistance (OR 3.81, 95% CI 2.01-7.13); and metabolic syndrome (OR 8.68, 95% CI 3.3-24.1). Adiponectin levels reduced NAFLD risk (OR 0.88, 95% CI 0.80-0.96).Conclusion: In postmenopausal women, metabolic syndrome, abdominal obesity, and insulin resistance were risk markers for the development of NAFLD, whereas higher adiponectin values indicated a protection marker.

The effects of heat-moisture treatment on avocado starch granules: thermoanalytical and structural analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da administração de eritropoietina na dislipidemia e na hipertrofia ventricular esquerda de camundongos hiperlipidêmicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Irradiação e atmosfera modificada passiva na qualidade pós-colheita de goiabas 'Pedro Sato'

The aim of this study was to evaluate the effect of gamma radiation associated with modified atmosphere on postharvest quality of guavas ‘Pedro Sato’. It was used guavas from the region of Vista Alegre do Alto/São Paulo/Brazil. After harvest, the fruits were immediately transported to the Fruit and Vegetables Laboratory from the Agroindustrial Management and Technology Department, Agronomic Sciences College - UNESP - Botucatu / SP, where they were kept at 10 ° C and 90-95% RH in cold storage, for 28 days. It was used the randomized design, with factorial scheme 5 x 5, three repetitions. The first factor consisted of the following effects: control 1 (without package or irradiation), control 2 (polystyrene package/PS + package low density polyethylene/LDPE and without irradiation), treatment 1 (PS + LDPE and 0.2 kGy ), treatment 2 (PS + LDPE and 0.6 kGy) and treatment 3 (PS + LDPE and 1.0 kGy). The second factor consisted of the evaluation periods: 0, 7, 14, 21 and 28 days. The analyses were: firmness, soluble solids (SS), titratable acidity (TA), maturity index, pH, respiration rate. Concluded that high doses of irradiation promoted a negative effect on physical-chemical characteristics of guava ‘Pedro Sato’, verifying that only the lowest dose associated with modified atmosphere provided fruits with higher quality and acceptability, due to higher maturation rate and soluble solids obtained. Regarding the days of analysis, there were no positive effect of the treatments during storage, where only the early days promoted better values for the variables studied.

Efeito da modificação atmosférica em goiabas var. Paluma na redução de danos mecânicos em pós-colheita

In the postharvest management, the fruits can be exposed to injuries that depreciated the quality and the shelf life. Thus, it was evaluated the modified atmosphere effects on guavas var. Paluma subjected to different mechanical damages. Once harvested, the fruits were selected, sanitized and submitted to the treatments T1 (control) - without injuries or packaging in bags of low density polyethylene (LDPE); T2 - without injuries + LDPE bags; T3 - damage by fall of 1 m + LDPE bags; T4 - damage by compression of 9 N + LDPE bags; T5 - damage by fall of 1 m + damage by compression of 9 N + LDPE bags and T6 - damage by fall of 1 m + damage by compression of 9 N without LDPE bags. The treatments were kept in cold storage at 10 ± 1 o C and 94 ± 2% de R.H. The analysis of CO2/ethylene production, enzymatic activity, total and soluble pectins, pulp firmness, titratable acidity (TA), soluble solids (SS), reducing sugars and ascorbic acid were performed every 10 days of refrigeration, and an additional day outside cold storage (22 ± 1o C and 75 ± 3% R.H.) for 30 days. Guavas packed in LDPE bags, not subject to mechanical damage, presented the best quality standards. The fruits suffered only one kind of damage, when packaged, presented satisfactory pattern compared to the fruits without package and not exposed to any mechanical damages. Applying the two kinds of damages, the LDPE packaging was not adequate to decrease the metabolic rate of these fruits, making them unfit for marketing.

The I405V and Taq1B polymorphisms of the CETP gene differentially affect sub-clinical carotid atherosclerosis

Background: Cholesteryl ester transfer protein (CETP) plays a major role in lipid metabolism, but studies on the association of CETP polymorphisms with risks of cardiovascular disease are inconsistent. This study investigated whether the CETP gene I405V and Taq1B polymorphisms modified subclinical atherosclerosis in an asymptomatic Brazilian population sample. Methods: The polymorphisms were analyzed using polymerase chain reaction in 207 adult volunteers. Serum lipid profiles, oxLDL Ab titers, C-reactive protein and tumor necrosis factor-a concentrations and CETP and phospholipid transfer protein (PLTP) activities were determined, and common carotid artery intima-media thickness (cIMT) was measured using ultrasonography. Results: No differences in cIMT were observed between the presence or absence of the minor B2 and V alleles in either polymorphism. However, inverse correlations between mean cIMT and CETP activity in the presence of these polymorphisms were observed, and positive correlations of these polymorphisms with PLTP activity and oxLDL Ab titers were identified. Moreover, logistic multivariate analysis revealed that the presence of the B2 allele was associated with a 5.1-fold (CI 95%, OR: 1.26 - 21.06) increased risk for cIMT, which was equal and above the 66th percentile and positively interacted with age. However, no associations with the V allele or CETP and PLTP activities were observed. Conclusions: None of the studied parameters, including CETP activity, explained the different relationships between these polymorphisms and cIMT, suggesting that other non-determined factors were affected by the genotypes and related to carotid atherosclerotic disease.

Association between diet and polymorphisms in individuals with statin-controlled dyslipidaemia grouped according to oxidative stress biomarkers

The objective of this study was to investigate whether differences in diet and in single-nucleotide polymorphisms (SNPs) found in paraoxonase-1 (PON-1), 3-hydroxy-3-methylglutaryl-coenzyme A reductase (HMGCR), cholesterol ester transfer protein (CETP) and apolipoprotein E (APOE) genes, are associated with oxidative stress biomarkers and consequently with susceptibility of low-density cholesterol (LDL) to oxidation. A multivariate approach was applied to a group of 55 patients according to three biomarkers: plasma antioxidant activity, malondialdehyde and oxidized LDL (oxLDL) concentrations. Individuals classified in Cluster III showed the worst prognoses in terms of antioxidant activity and oxidative status. Individuals classified in Cluster I presented the lowest oxidative status, while individuals grouped in Cluster II presented the highest levels of antioxidant activity. No difference in nutrient intake was observed among the clusters. Significantly higher gamma- and delta-tocopherol concentrations were observed in those individuals with the highest levels of antioxidant activity. No single linear regression was statistically significant, suggesting that mutant alleles of the SNPs selected did not contribute to the differences observed in oxidative stress response. Although not statistically significant, the p value of the APO E coefficient for oxLDL response was 0.096, indicating that patients who carry the TT allele of the APO E gene tend to present lower plasma oxLDL concentrations. Therefore, the differences in oxidative stress levels observed in this study could not be attributed to diet or to the variant alleles of PON-1, CETP, HMGCR or APO E. This data supports the influence of gamma-tocopherol and delta-tocopherol on antioxidant activity, and highlights the need for further studies investigating APO E alleles and LDL oxidation.

Development and characterization of non-oxide ceramic composites for mechanical and tribological applications

The main reasons for the attention focused on ceramics as possible structural materials are their wear resistance and the ability to operate with limited oxidation and ablation at temperatures above 2000°C. Hence, this work is devoted to the study of two classes of materials which can satisfy these requirements: silicon carbide -based ceramics (SiC) for wear applications and borides and carbides of transition metals for ultra-high temperatures applications (UHTCs). SiC-based materials: Silicon carbide is a hard ceramic, which finds applications in many industrial sectors, from heat production, to automotive engineering and metals processing. In view of new fields of uses, SiC-based ceramics were produced with addition of 10-30 vol% of MoSi2, in order to obtain electro conductive ceramics. MoSi2, indeed, is an intermetallic compound which possesses high temperature oxidation resistance, high electrical conductivity (21·10-6 Ω·cm), relatively low density (6.31 g/cm3), high melting point (2030°C) and high stiffness (440 GPa). The SiC-based ceramics were hot pressed at 1900°C with addition of Al2O3-Y2O3 or Y2O3-AlN as sintering additives. The microstructure of the composites and of the reference materials, SiC and MoSi2, were studied by means of conventional analytical techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (SEM-EDS). The composites showed a homogeneous microstructure, with good dispersion of the secondary phases and low residual porosity. The following thermo-mechanical properties of the SiC-based materials were measured: Vickers hardness (HV), Young’s modulus (E), fracture toughness (KIc) and room to high temperature flexural strength (σ). The mechanical properties of the composites were compared to those of two monolithic SiC and MoSi2 materials and resulted in a higher stiffness, fracture toughness and slightly higher flexural resistance. Tribological tests were also performed in two configurations disco-on-pin and slideron cylinder, aiming at studying the wear behaviour of SiC-MoSi2 composites with Al2O3 as counterfacing materials. The tests pointed out that the addition of MoSi2 was detrimental owing to a lower hardness in comparison with the pure SiC matrix. On the contrary, electrical measurements revealed that the addition of 30 vol% of MoSi2, rendered the composite electroconductive, lowering the electrical resistance of three orders of magnitude. Ultra High Temperature Ceramics: Carbides, borides and nitrides of transition metals (Ti, Zr, Hf, Ta, Nb, Mo) possess very high melting points and interesting engineering properties, such as high hardness (20-25 GPa), high stiffness (400-500 GPa), flexural strengths which remain unaltered from room temperature to 1500°C and excellent corrosion resistance in aggressive environment. All these properties place the UHTCs as potential candidates for the development of manoeuvrable hypersonic flight vehicles with sharp leading edges. To this scope Zr- and Hf- carbide and boride materials were produced with addition of 5-20 vol% of MoSi2. This secondary phase enabled the achievement of full dense composites at temperature lower than 2000°C and without the application of pressure. Besides the conventional microstructure analyses XRD and SEM-EDS, transmission electron microscopy (TEM) was employed to explore the microstructure on a small length scale to disclose the effective densification mechanisms. A thorough literature analysis revealed that neither detailed TEM work nor reports on densification mechanisms are available for this class of materials, which however are essential to optimize the sintering aids utilized and the processing parameters applied. Microstructural analyses, along with thermodynamics and crystallographic considerations, led to disclose of the effective role of MoSi2 during sintering of Zrand Hf- carbides and borides. Among the investigated mechanical properties (HV, E, KIc, σ from room temperature to 1500°C), the high temperature flexural strength was improved due to the protective and sealing effect of a silica-based glassy phase, especially for the borides. Nanoindentation tests were also performed on HfC-MoSi2 composites in order to extract hardness and elastic modulus of the single phases. Finally, arc jet tests on HfC- and HfB2-based composites confirmed the excellent oxidation behaviour of these materials under temperature exceeding 2000°C; no cracking or spallation occurred and the modified layer was only 80-90 μm thick.

Structure and properties of composite polyolefin materials

This thesis is based on three main studies, all dealing with structure-property investigation of semicrystalline polyolefin-based composites. Low density poly(ethylene) (LDPE) and isotactic poly(propylene) (iPP) were chosen as parts of the composites materials and they were investigated either separately (as homoploymers), either in blend systems with the composition LDPE/iPP 80/20 or as filled matrix with layered silicate (montmorillonite). The beneficial influence of adding ethylene-co-propylene polymer of amorphous nature, to low density poly(ethylene)/isotactic poly(propylene) (80/20) blend is demonstrated. This effect is expressed by the major improvement of mechanical properties of ternary blends as examined at a macroscopic size scale by means of tensile measurements. The structure investigation also reveals a clear dependence of the morphology on adding ethylene-copropylene polymer. Both the nature and the content of ethylene-co-propylene polymer affect structure and properties. It is further demonstrated that the extent of improvement in mechanical properties is to be related to the molecular details of the compatibilizer. Combination of high molecular weight and high ethylene content is appropriate for the studied system where the poly(ethylene) plays the role of matrix. A new way to characterize semicrystalline systems by means of Brillouin spectroscopy is presented in this study. By this method based on inelastic light scattering, we were able to measure the high frequency elastic constant (c11) of the two microphases in the case where the spherulites size is exhibit size larger than the size of the probing phonon wavelength. In this considered case, the sample film is inhomogeneous over the relevant length scales and there is an access to the transverse phonon in the crystalline phase yielding the elastic constant c44 as well. Isotactic poly(propylene) is well suited for this type of investigation since its morphology can be tailored through different thermal treatment from the melt. Two distinctly different types of films were used; quenched (low crystallinity) and annealed (high crystallinity). The Brillouin scattering data are discussed with respect to the spherulites size, lamellae thickness, long period, crystallinity degree and well documented by AFM images. The structure and the properties of isotactic poly(propylene) matrix modified by inorganic layered silicate, montmorillonite, are discussed with respect to the clay content. Isotactic poly(propylene)-graft-maleic anhydride was used as compatibilizer. It is clearly demonstrated that the property enhancement is largely due to the ability of layered silicate to exfoliate. The intimate dispersion of the nanometer-thick silicate result from a delicate balance of the content ratio between the isotactic poly(propylene)-graft-maleic anhydride compatibilizer and the inorganic clay.

Detektion neuroaktiver Substanzen durch Modifikation des Aktivitätsmusters neokortikaler Netzwerke auf Multielektrodenarrays – Charakterisierung und Optimierung eines neuronalen Biosensors

In dieser Arbeit wurden kortikale neuronale Netzwerke auf Multielektrodenarrays auf ihre Tauglichkeit als zellbasiertes Biosensorsystem untersucht. Der Schwerpunkt der pharmakologischen Untersuchungen an den ausgereiften kortikalen Netzwerken lag auf dem Einsatz von Substanzen, welche auf den GABAA-Rezeptor einwirken. Die Modifikation des spontan generierten Aktivitätsmusters ließ dabei Rückschlüsse auf die Wirksamkeit und den Wirkungsmechanismus der Testsubstanzen zu. Ferner war in den meisten Fällen eine Diskriminierung der auf den gleichen Rezeptor einwirkenden Substanzen möglich. Die Analyse der Spikerate und verschiedener auf Bursts beruhender Messparameter machte deutlich, dass die Burstrate bei den extrazellulären Ableitungen auf Netzwerkebene den sensitivsten und verlässlichsten Parameter zum Nachweis der Substanzeffekte darstellte. Durch die Verwendung kortikaler Netzwerke unter optimierten Kulturbedingungen und einer auf das System abgestimmten Analysesoftware konnte die Reproduzierbarkeit und Sensitivität im Vergleich zu anderen Studien deutlich verbessert werden. Um die extrazelluläre Signalableitung von einer möglichst geringen Zellanzahl und damit einem überschaubaren zellulären Netzwerk auf Multielektrodenarrays zu ermöglichen, wurden die Oberflächeneigenschaften der Substrate so modifiziert, dass die Lokalisation der Zellsomata und das Auswachsen der Neurite einer geometrischen Kontrolle unterlag. Die kontrollierte Substratbeschichtung des Adhäsionspromotors Poly-D-Lysin in einem triangulären Muster konnte dabei durch die Methode des Mikrokontaktstempelns realisiert werden. Durch das kontrollierte Zellwachstum konnte die extrazelluläre Ableitung von Netzwerken einer geringen Zelldichte über einen Zeitraum von mehreren Wochen ermöglicht werden. Die Untersuchung struktureller und morphogenetischer Eigenschaften, sowie elektrophysiologische Untersuchungen der strukturierten Netzwerke bewiesen, dass die kontrollierte Substratbeschichtung sich nicht negativ auf das Wachstum, die Synaptogenese und die Funktionalität auswirkte.

Bedeutung und Regulation von Apolipoprotein J in atherosklerotischen Läsionen

Apolipoprotein J (ApoJ) ist ein heterodimeres sekretiertes Glycoprotein, welchem sowohl antiapoptotische als auch antiinflammatorische Eigenschaften zugeschrieben werden. Es wird unter vielen pathophysiologischen Zuständen verstärkt exprimiert. Dazu zählen viele Krankheiten wie z.B. Krebs, M. Alzheimer, Creuzfeldt Jakob und Atherosklerose. Die vorliegende Arbeit befasst sich zum Einen mit der Funktion von ApoJ bei Atherosklerose und zum Anderen mit der Regulation von ApoJ durch in atherosklerotischen Läsionen vorkommende Bestandteile. Für die Untersuchungen der Funktion von ApoJ bei der Atherosklerose wurde die „Mainzer Hypothese“ zugrunde gelegt, die davon ausgeht, dass enzymatisch verdautes LDL (high density lipoprotein) (E-LDL) ursächlich für die Entstehung von atherosklerotischen Läsionen ist. In der vorliegenden Arbeit konnte gezeigt werden, dass ApoJ zwar an E-LDL bindet, nicht aber an natives LDL und dass durch diese Bindung die zytotoxische Wirkung von E-LDL auf glatte Muskelzellen der Ratte unterdrückt wird. Mittels Annexinfärbung und Caspase-Messung konnte gezeigt werden, dass ApoJ in diesem Fall eine antiapoptotische Funktion aufweist. Durch immunhistochemische Untersuchungen an humanen Gewebsschnitten aus frühen atherosklerotischen Läsionen konnte eine Kolokalisation von ApoJ und E-LDL nachgewiesen werden. Diese Ergebnisse unterstreichen die Mainzer Hypothese. Durch eine Behandlung von glatten Muskelzellen der Ratte mit den Lipoproteinen LDL/E-LDL und nekrotischen Zellen sollte die Regulation von ApoJ durch in atherosklerotischen Läsionen vorhandenen Stimuli untersucht werden. Frühere Arbeiten unserer Arbeitsgruppe konnten bereits zeigen, dass eine Behandlung mit nekrotischen Zellen zu einer vermehrten Expression der ApoJ-mRNA führt und dass diese Regulation in Korrelation mit der Expression von Toll-like Rezeptoren (TLR) der verschiedenen Zellen steht. In dieser Arbeit konnte RNA aus nekrotischen Zellen als ApoJ-induzierende Komponente identifiziert werden. Durch Inhibition der TLR3-Signalwege konnten erste Hinweise darüber gewonnen werden, über welche Signaltransduktionswege die ApoJ Regulation erfolgt. Eine Behandlung der Zellen mit E LDL und LDL hingegen führte zu einer Repression der ApoJ-Sekretion. Diese Ergebnisse deuten darauf hin, dass in atherosklerotischen Läsionen sowohl ApoJ induzierende wie auch repremierende Stimuli vorhanden sind.

Exploring host-pathogen interactions through protein microarray. Large-scale protein microarray analysis revealed novel human receptors for the staphylococcal immune evasion protein FLIPr and for the neisserial adhesin NadA

Adhesion, immune evasion and invasion are key determinants during bacterial pathogenesis. Pathogenic bacteria possess a wide variety of surface exposed and secreted proteins which allow them to adhere to tissues, escape the immune system and spread throughout the human body. Therefore, extensive contacts between the human and the bacterial extracellular proteomes take place at the host-pathogen interface at the protein level. Recent researches emphasized the importance of a global and deeper understanding of the molecular mechanisms which underlie bacterial immune evasion and pathogenesis. Through the use of a large-scale, unbiased, protein microarray-based approach and of wide libraries of human and bacterial purified proteins, novel host-pathogen interactions were identified. This approach was first applied to Staphylococcus aureus, cause of a wide variety of diseases ranging from skin infections to endocarditis and sepsis. The screening led to the identification of several novel interactions between the human and the S. aureus extracellular proteomes. The interaction between the S. aureus immune evasion protein FLIPr (formyl-peptide receptor like-1 inhibitory protein) and the human complement component C1q, key players of the offense-defense fighting, was characterized using label-free techniques and functional assays. The same approach was also applied to Neisseria meningitidis, major cause of bacterial meningitis and fulminant sepsis worldwide. The screening led to the identification of several potential human receptors for the neisserial adhesin A (NadA), an important adhesion protein and key determinant of meningococcal interactions with the human host at various stages. The interaction between NadA and human LOX-1 (low-density oxidized lipoprotein receptor) was confirmed using label-free technologies and cell binding experiments in vitro. Taken together, these two examples provided concrete insights into S. aureus and N. meningitidis pathogenesis, and identified protein microarray coupled with appropriate validation methodologies as a powerful large scale tool for host-pathogen interactions studies.

Efficient fabrication of polymer nanocomposites with effective exfoliation and dispersion by solid-state/melt extrusion

In this communication, solid-state/melt extrusion (SSME) is introduced as a novel technique that combines solid-state shear pulverization (SSSP) and conventional twin screw extrusion (TSE) in a single extrusion system. The morphology and property enhancements in a model linear low-density polyethylene/organically modified clay nanocomposite sample fabricated via SSME were compared to those fabricated via SSSP and TSE. The results show that SSME is capable of exfoliating and dispersing the nanofillers similarly to SSSP, while achieving a desirable output rate and producing extrudate similar in form to that from TSE.

Second-Generation Orthopaedic Measurement Device for in-vivo Assessment of Bone Quality

There are two main types of bone in the human body, trabecular and cortical bone. Cortical bone is primarily found on the outer surface of most bones in the body while trabecular bone is found in vertebrae and at the end of long bones (Ross 2007). Osteoporosis is a condition that compromises the structural integrity of trabecular bone, greatly reducing the ability of the bone to absorb energy from falls. The current method for diagnosing osteoporosis and predicting fracture risk is measurement of bone mineral density. Limitations of this method include dependence on the bone density measurement device and dependence on type of test and measurement location (Rubin 2005). Each year there are approximately 250,000 hip fractures in the United States due to osteoporosis (Kleerekoper 2006). Currently, the most common method for repairing a hip fracture is a hip fixation surgery. During surgery, a temporary guide wire is inserted to guide the permanent screw into place and then removed. It is believed that directly measuring this screw pullout force may result in a better assessment of bone quality than current indirect measurement techniques (T. Bowen 2008-2010, pers. comm.). The objective of this project is to design a device that can measure the force required to extract this guide wire. It is believed that this would give the surgeon a direct, quantitative measurement of bone quality at the site of the fixation. A first generation device was designed by a Bucknell Biomedical Engineering Senior Design team during the 2008- 2009 Academic Year. The first step of this project was to examine the device, conduct a thorough design analysis, and brainstorm new concepts. The concept selected uses a translational screw to extract the guide wire. The device was fabricated and underwent validation testing to ensure that the device was functional and met the required engineering specifications. Two tests were conducted, one to test the functionality of the device by testing if the device gave repeatable results, and the other to test the sensitivity of the device to misalignment. Guide wires were extracted from 3 materials, low density polyethylene, ultra high molecular weight polyethylene, and polypropylene and the force of extraction was measured. During testing, it was discovered that the spring in the device did not have a high enough spring constant to reach the high forces necessary for extracting the wires without excessive deflection of the spring. The test procedure was modified slightly so the wires were not fully threaded into the material. The testing results indicate that there is significant variation in the screw pullout force, up to 30% of the average value. This significant variation was attributed to problems in the testing and data collection, and a revised set of tests was proposed to better evaluate the performance of the device. The fabricated device is a fully-functioning prototype and further refinements and testing of the device may lead to a 3rd generation version capable of measuring the screw pullout force during hip fixation surgery.