Nitrato na dieta de ruminantes como estratégia nutricional para mitigação de metano entérico

A produção de metano entérico está entre as principais fontes de emissão de gases de efeito estufa dentre as atividades agropecuárias, além de gerar perda energética ao animal de até 12% da energia bruta consumida. Assim, o objetivo deste trabalho foi avaliar o uso de nitrato de cálcio encapsulado na alimentação de ruminantes como estratégia nutricional a mitigação de metano entérico. O experimento consistiu de duas fases. Fase I: Foram testadas dietas suplementadas com produto comercial de nitrato de cálcio encapsulado utilizando a técnica semiautomática de produção de gases in vitro. Meio grama de substrato com 50 mL de meio de incubação e 25 mL de inóculo ruminal foram incubados em frascos de vidro (160 mL) à 39 ºC por 24 horas para determinação da melhor dieta a ser testada in vivo. O primeiro ensaio testou a associação entre a monensina (dietas com e sem adição de monensina) e doses de nitrato encapsulado (0; 1,5 e 3% da matéria seca (MS)) para mitigação de metano in vitro. Não foi observada interação entre monensina e nitrato para as variáveis testadas. O segundo ensaio in vitro testou a interação do tipo de dieta com duas relações concentrado:volumoso, 20:80 e 80:20, e a inclusão de doses de nitrato encapsulado (0; 1,5; 3 e 4,5% MS). Embora não foi observado efeito associativo entre dieta e nitrato para redução de metano, foi observada mudança nos produtos da fermentação ruminal, com redução de propionato, em decorrência da concorrência de nitrato e propianogênicas por hidrogênio mais escasso em dietas com menor fermentação. Fase II: Conforme os resultados obtidos na Fase I, na segunda fase foi avaliado o efeito associativo da relação de concentrado:volumoso da dieta e a dose de nitrato sobre a emissão de metano, constituintes ruminais e toxicidade do nitrato in vivo. Utilizou-se seis borregos canulados no rúmen, distribuídos em delineamento experimental quadrado latino 6 x 6, em fatorial 2 x 3. Os fatores foram tipo de dieta (relação concentrado:volumoso 20:80 e 80:20) e inclusão de doses de nitrato encapsulado na dieta (0; 1,5 e 3% MS) em substituição gradual ao farelo de soja, totalizando seis tratamentos. Os teores de substituição do farelo de soja pelo nitrato foram em equivalente proteico de maneira a deixar as dietas isonitrogenadas. Os animais foram adaptados gradualmente a oferta de nitrato dietético para evitar problemas com toxidez. A análise de toxicidade foi avaliada pela taxa de metahemoglobina no sangue dos ovinos 3 horas após a alimentação. Nitrato reduziu a produção de metano em ambas as dietas. Os níveis de metahemoglobina no sangue dos animais não foram alterados pela adição de nitrato. Foi observado efeito associativo entre o tipo de dieta e nitrato para os produtos da fermentação ruminal, como acetato, que aumentou linearmente nas dietas com 80% de concentrado quando nitrato foi adicionado. Concluí-se que nitrato, utilizado de forma segura, é uma promissora estratégia para redução de metano entérico independentemente do tipo de dieta com que está sendo suplementado

Avaliação do ciclo de vida de blocos de concreto do mercado brasileiro: alvenaria e pavimentação.

A construção civil é responsável por relevante impacto ao meio ambiente, da extração das materiais-primas até a disposição dos seus resíduos em aterros. A avaliação do ciclo de vida (ACV) é uma ferramenta que possibilita a estimativa dos impactos ambientais potenciais do setor de forma sistemática. A simplificação da ACV, pelo uso de dados secundários e redução do escopo do estudo, facilita sua implementação como ferramenta de promoção da sustentabilidade. O objetivo dessa dissertação é estimar faixas dos cinco principais indicadores do setor de blocos de concreto do mercado brasileiro pela simplificação da ACV: consumo de materiais, energia incorporada, emissão de CO2, água e geração de resíduos. Este estudo foi o piloto do Projeto ACV Modular, iniciativa do Conselho Brasileiro de Construção Sustentável em parceria da Associação Brasileira de Cimento Portland e da Associação Brasileira da Indústria de Blocos de Concreto. O inventário foi desenvolvido com 33 fábricas localizadas em diferentes regiões do Brasil, estas sendo responsáveis por aproximadamente 50% da produção nacional. Os produtos selecionados foram blocos para pavimentação e alvenaria (estruturais e de vedação) considerados mais representativos no mercado. A fronteira do sistema adotada foi do berço ao portão da fábrica. O indicador de consumo de materiais não foi apresentado para garantir a confidencialidade dos dados das empresas, pois o teor de cimento foi dado direto informado no formulário. O indicador de resíduos não pode ser gerado devido a diferentes interpretações adotadas pelos fabricantes ao registrar seus dados. O indicador de água, apesar de incluir todo o consumo informado pela fábrica, apresentou valores muito baixos, alguns próximos a zero. O consumo de cimento, não o teor de clínquer, foi responsável por parcela significativa do CO2 e da energia incorporada do bloco, com participação de 62 a 99% das emissões de CO2. Assim, entre as empresas analisadas, mesmo com igual rota tecnológica, os insumos utilizados, a formulação do concreto, a eficiência de compactação da vibro prensa e o sistema produtivo tiveram maior influência nos indicadores de materiais, energia e CO2.

Recommendations for Creating and Implementing Climate Change Mitigation Strategies for Municipalities

The effects of climate change are beginning to show themselves globally and not enough is being done to counteract these changes. Institutional action is a necessity, and municipalities have an opportunity to fill this void by developing mitigation strategies that will reduce greenhouse gas emissions. This report critically reviews the municipal climate action plans for Portland, Oregon; Boulder, Colorado; and Toronto, Ontario and provides recommendations for other municipalities who wish to create and implement climate change mitigation plans.

Assessment of CO2 adsorption capacity on activated carbons by a combination of batch and dynamic tests

In this work, batch and dynamic adsorption tests are coupled for an accurate evaluation of CO2 adsorption performance for three different activated carbons obtained from olives stones by chemical activation followed by physical activation with CO2 at varying times, i.e. 20, 40 and 60 h. Kinetic and thermodynamic CO2 adsorption tests from simulated flue-gas at different temperature and CO2 pressure are carried out both in batch (a manometric equipment operating with pure CO2) and dynamic (a lab-scale fixed-bed column operating with CO2/N2 mixture) conditions. The textural characterization of the activated carbon samples shows a direct dependence of both micropore and ultramicropore volume on the activation time, hence AC60 has the higher contribution. The adsorption tests conducted at 273 and 293 K showed that, when CO2 pressure is lower than 0.3 bar, the lower the activation time the higher CO2 adsorption capacity and a ranking ωeq(AC20)>ωeq(AC40)>ωeq(AC60) can be exactly defined when T= 293 K. This result can be likely ascribed to a narrower pore size distribution of the AC20 sample, whose smaller pores are more effective for CO2 capture at higher temperature and lower CO2 pressure, the latter representing operating conditions of major interest for decarbonation of a flue-gas effluent. Moreover, the experimental results obtained from dynamic tests confirm the results derived from the batch tests in terms of CO2 adsorption capacity. It is important to highlight that the adsorption of N2 on the synthesized AC samples can be considered negligible. Finally, the importance of a proper analysis of characterization data and adsorption experimental results is highlighted for a correct assessment of CO2 removal performances of activated carbons at different CO2 pressure and operating temperature.

Kinetic study and thermal decomposition behavior of viscoelastic memory foam

A systematic investigation of the thermal decomposition of viscoelastic memory foam (VMF) was performed using thermogravimetric analysis (TGA) to obtain the kinetic parameters, and thermogravimetric analysis coupled to Fourier Transformed Infrared Spectrometry (TGA-FTIR) and thermogravimetric analysis coupled to Mass Spectrometry (TGA-MS) to obtain detailed information of evolved products on pyrolysis and oxidative degradations. Two consecutive nth-order reactions were employed to correlate the experimental data from dynamic and isothermal runs performed at three different heating rates (5, 10 and 20 K/min) under an inert atmosphere. On the other hand, for the kinetic study of the oxidative decomposition, the data from combustion (synthetic air) and poor oxygen combustion (N2:O2 = 9:1) runs, at three heating rates and under dynamic and isothermal conditions, were correlated simultaneously. A kinetic model consisting of three consecutive reactions presented a really good correlation in all runs. TGA-FTIR analysis showed that the main gases released during the pyrolysis of VMF were determined as ether and aliphatic hydrocarbons, whereas in combustion apart from the previous gases, aldehydes, amines and CO2 have also been detected as the main gases. These results were confirmed by the TGA-MS.

A Comparison of the Impacts of Lithium Extraction and Lithium Recycling Processes

Lithium is used in the cathode and electrolyte of rechargeable batteries in many portable electronics and electric vehicles, and is thus seen as a critical component of modern technology (Gruber et al., 2011). Electric vehicles are promoted as a way to reduce carbon emissions associated with the transportation sector, which accounts for 14.3% of anthropogenic greenhouse gas emissions (OECD International Transport Forum, 2010). However, the sustainability of lithium procurement will influence the overall environmental impact of this proposed “green” solution. It is estimated that 66% of the world’s lithium resource is contained in natural brines, 24% in pegmatites, and 8% in sedimentary rocks such as hectorite clays (Gruber et al., 2011). It has been shown that “[r]ecycling of lithium from Li-ion batteries may be a critical factor in balancing the supply of lithium with future demand” (Gruber et al., 2011). In an attempt to quantify energy and materials consumption associated with production of a unit of useful lithium compounds, industry reports and peer-reviewed scientific literature concerning lithium mining and lithium recycling were reviewed and compared. Other aspects of sustainability, such as waste or by-products produced in the production of a unit of useful lithium, were also explored. Thus, this paper will serve to further the evaluation of the comparative environmental consequences associated with lithium production via extraction versus recycling. Efficiencies must be made in both processes to maximize productivity while minimizing ecological harm.

You'd better bet on the ETS. Bruegel Policy Brief 2013/02, April 2013

The issue: The European Union's emissions trading system (ETS), introduced in 2005, is the centerpiece of EU decarbonisation efforts and the biggest emissions trading scheme in the world. After a peak in May 2008, the price of ETS carbon allowances started to collapse, and industry, civil society and policymakers began to think about how to ‘repair the ETS’. However, the ETS is an effective and efficient tool to mitigate greenhouse gas emissions, and although prices have not been stable, it has evolved to cover more sectors and greenhouse gases, and to become more robust and less distorting. Prices are depressed because of an interplay of fundamental factors and a lack of confidence in the system. Policy challenge The ETS must be stabilised by reinforcing the credibility of the system so that the use of existing low-carbon alternatives (for example burning gas instead of coal) is incentivised and investment in low-carbon assets is ensured. Further-more, failure to reinvigorate the ETS might compromise the cost-effective synchronisation of European decarbonisation efforts across sectors and countries. To restore credibility and to ensure long-term commitment to the ETS, the European Investment Bank should auction guarantees on the future emission allowance price.This will reduce the risk for low-carbon investments and enable stabilisation of the ETS until a compromise is found on structural measures to reinforce it in order to achieve the EU's long-term decarbonisation targets.

The Potential Evolution of the European Energy System to 2020 and 2050. CEPS Working Document No. 392, 26 March 2014

This paper assesses the impact of decarbonisation of the energy sector on employment in Europe. Setting the stage for such an assessment, the paper provides an analysis of possible pathways to decarbonise Europe’s energy system, taking into account EU greenhouse gas emissions reduction targets for 2020 and 2050. It pays particular attention to various low-carbon technologies that could be deployed in different regions of the EU. It concludes that efficiency and renewables play a major role in any decarbonisation scenario and that the power sector is the main enabler for the transition to a low-carbon economy in Europe, despite rising electricity demand. The extent of the decline in the share of fossil fuels will largely depend on the existence of carbon capture and storage (CCS), which remains a major source of uncertainty.

A European response to the resource and climate challenge. CHALLENGE EUROPE Issue 22 - Challenges and new beginnings: Priorities for the EU's new leadership, September 2014

The 20th Century was characterised by growth: the world population grew by four times and its economic output grew by 40 times. At the same time, the resource use and greenhouse gas emissions increased drastically. Only within the last two decades, the worldwide extraction of resources increased by over 50%. With the expectation that the demand of resources will triple by 2050 and the demand for food, feed and fibre is projected to increase by 70%, there is no doubt that we will exceed our planet's boundaries, the safe thresholds within which humanity can continue to develop and thrive for generations to come. Crossing these boundaries could generate abrubt or irreversible environmental changes. Respecting them reduces the risk that human society and ecosystems will face irreversible damages.

Consensus, contradiction, and conciliation of interests: the geo-economics of the Energy Union. EPC Policy Brief, 8 July 2015

European Union energy policy calls for nothing less than a profound transformation of the EU's energy system: by 2050 decarbonised electricity generation with 80-95% fewer greenhouse gas emissions, increased use of renewables, more energy efficiency, a functioning energy market and increased security of supply are to be achieved. Different EU policies (e.g., EU climate and energy package for 2020) are intended to create the political and regulatory framework for this transformation. The sectorial dynamics resulting from these EU policies already affect the systems of electricity generation, transportation and storage in Europe, and the more effective the implementation of new measures the more the structure of Europe's power system will change in the years to come. Recent initiatives such as the 2030 climate/energy package and the Energy Union are supposed to keep this dynamic up. Setting new EU targets, however, is not necessarily the same as meeting them. The impact of EU energy policy is likely to have considerable geo-economic implications for individual member states: with increasing market integration come new competitors; coal and gas power plants face new renewable challengers domestically and abroad; and diversification towards new suppliers will result in new trade routes, entry points and infrastructure. Where these implications are at odds with powerful national interests, any member state may point to Article 194, 2 of the Lisbon Treaty and argue that the EU's energy policy agenda interferes with its given right to determine the conditions for exploiting its energy resources, the choice between different energy sources and the general structure of its energy supply. The implementation of new policy initiatives therefore involves intense negotiations to conciliate contradicting interests, something that traditionally has been far from easy to achieve. In areas where this process runs into difficulties, the transfer of sovereignty to the European level is usually to be found amongst the suggested solutions. Pooling sovereignty on a new level, however, does not automatically result in a consensus, i.e., conciliate contradicting interests. Rather than focussing on the right level of decision making, European policy makers need to face the (inconvenient truth of) geo-economical frictions within the Union that make it difficult to come to an arrangement. The reminder of this text explains these latter, more structural and sector-related challenges for European energy policy in more detail, and develops some concrete steps towards a political and regulatory framework necessary to overcome them.

The Principle of Common Concern and Climate Change

Effective policies combating global warming and incentivising reduction of greenhouse gases face fundamental collective action problems. States defending short term interests avoid international commitments and seek to benefit from measures combating global warming taken elsewhere. The paper explores the potential of Common Concern as an emerging principle of international law, in particular international environmental law, in addressing collective action problems and the global commons. It expounds the contours of the principle, its relationship to common heritage of mankind, to shared and differentiated responsibility and to public goods. It explores its potential to provide the foundations not only for international cooperation, but also to justify, and delimitate at the same time, unilateral action at home and deploying extraterritorial effects in addressing the challenges of global warming and climate change mitigation. As unilateral measures mainly translate into measures of trade policy, the principle of Common Concern is inherently linked and limited by existing legal disciplines in particular of the law of the World Trade Organization.

The rise and development of the liquefaction of gases.

Mode of access: Internet.

Interpretation of the relationship between benthic fauna, geologic distributions, and methane seeps at Southern Hydrate Ridge, Oregon continental margin

Senior thesis written for Oceanography 445

The Social and Economic Impacts of a Washington State Carbon Tax

Thesis (Master's)--University of Washington, 2016-06

Modelling, nitrogen dynamics in sugarcane systems: Recent advances and applications

Substantial amounts of nitrogen (N) fertiliser are necessary for commercial sugarcane production because of the large biomass produced by sugarcane crops. Since this fertiliser is a substantial input cost and has implications if N is lost to the environment, there are pressing needs to optimise the supply of N to the crops' requirements. The complexity of the N cycle and the strong influence of climate, through its moderation of N transformation processes in the soil and its impact on N uptake by crops, make simulation-based approaches to this N management problem attractive. In this paper we describe the processes to be captured in modelling soil and plant N dynamics in sugarcane systems, and review the capability for modelling these processes. We then illustrate insights gained into improved management of N through simulation-based studies for the issues of crop residue management, irrigation management and greenhouse gas emissions. We conclude by identifying processes not currently represented in the models used for simulating N cycling in sugarcane production systems, and illustrate ways in which these can be partially overcome in the short term. (c) 2005 Elsevier B.V. All rights reserved.