Stable tetrahedral aluminum sites in hexagonal mesoporous aluminosilicates

A unique templating approach for the synthesis of hexagonal mesoporous aluminosilicates via self-assembly of pre-formed aluminosilcate nanoclusters with the templating micella formed by cetyltrimethylammonium bromide (CTAB) is described. The obtained materials of MAS-5 are hydrothermally stable, which is shown by X-ray diffraction (XRD) analysis. Furthermore, as characterized by NMR technique, MAS-5 has stable tetrahedral aluminum sites that is the major contributions to the acidity of aluminosilicate molecular sieve, and on non-framework aluminium species in the samples was observed.

Direct synthesis and characterization of titanium-substituted mesoporous molecular sieve SBA-15

Ti-substituted mesoporous SBA-15 (Ti-SBA-15) materials have been synthesized by using a new approach in which the hydrolysis of the silicon precursor (tetramethoxysilane, TMOS) is accelerated by fluoride. These materials were characterized by powder X-ray diffraction patterns (XRD), X-ray fluorescence spectroscopy (Y-RF), N-2 sorption isotherms, diffuse-reflectance UV-visible (UV-vis) and UV-Raman spectroscopy, Si-29 MAS NMR, and the catalytic epoxidation reaction of styrene. Experiments show that Ti-SBA-15 samples of high quality can be obtained under the following conditions: F/Si greater than or equal to 0.03 (molar ratio), pH less than or equal to 1.0, aging temperature less than or equal to 80 degreesC, and Ti/Si less than or equal to 0.01. It was found that the hydrolysis rate of TMOS was remarkably accelerated by fluoride, which was suggested to play the main role in the formation of Ti-SBA-15 materials of high quality. There is no stoichiometric incorporation of Ti, and the Ti contents that are obtained are quite low in the case of the approach that is proposed. The calcined Ti-SBA-15 materials show highly catalytic activity in the epoxidation of styrene.

Synthesis of ordered mesoporous carbons composed of nanotubes via catalytic chemical vapor deposition

Ordered mesoporous carbons composed of arrays of nanotubes have been synthesized using ordered mesoporous silica templates via catalytic chemical vapor deposition. The ordered carbons possess bimodal pores, namely, the pores arise from the "replica" of frameworks of the template and the pores correspond to carbon nanotubes formed in the channels of the template (see Figure).

Templateless synthesis of catalysts with narrow mesoporous distribution

In this study, amorphous silica-alumina nanomaterials with narrow mesoporous distribution can be obtained by two novel sol-gel processes, without the use of any templates. The results of our experiments show that the preparation method has a great influence on the precursor sol structure as well as the specific surface area and mesopore volume of the final product, but has no effect on the pore size distribution.

Ultrasonic synthesis of silica-alumina nanomaterials with controlled mesopore distribution without using surfactants

A novel sol-gel process has been developed for the synthesis of amorphous silica-aluminas with controlled mesopore distribution without the use of organic templating agents, e.g., surfactant molecules. Ultrasonic treatment during the synthesis enables production of precursor sols with narrow particle size distribution. Atomic force microscopy analysis shows that these sol particles are spherical in shape with a narrow size distribution (i.e., 13-25 nm) and their aggregation during the gelation creates clusters containing similar sized interparticle mesopores. A nitrogen physiadsorption study indicates that the mesoporous materials containing different Si/Al ratios prepared by the new synthesis method has a large specific surface area (i.e., 587-692 m(2)/g) and similar pore sizes of 2-11 nm. Solid-state Al-27 magic angle spinning (MAS) NMR shows that most of the aluminum is located in the tetrahedral position. A transmission electron microscopy (TEM) image shows that the mesoporous silica-alumina consists of 12-25 nm spheres. Additionally, high-resolution TEM and electron diffraction indicate that some nanoparticles are characteristic of a crystal, although X-ray diffraction and Si-29 MAS NMR analysis show an amorphous material.

A novel zirconium-based perovskite-type membrane material for oxygen permeation

A novel zirconium-based membrane material of BaCo0.4Fe0.4Zr0.2O3-6 with cubic perovskite structure was synthesized for the first time through a method of citric and EDTA acid combined complexes. The structural stability was characterized by XRD, O-2-TPD and H-2-TPR techniques respectively. The high oxygen permeation flux of 0.873 mL/cm(2) min at 950 degreesC was obtained under He/Air gradient. Meanwhile, the single activation energy for oxygen permeation and the long-term steady operation of 200 h at 800 degreesC were achieved.

Manual de prática de coleta e herborização de material botânico.

2008

Multiplicação rápida, método simples e de baixo custo na produção de material propagativo de mandioca.

A baixa taxa de multiplicação de mandioca é um dos obstáculos à sua propagação em larga escala. De cada planta de mandioca obtém-se de 5 a 10 manivas de 20 cm de comprimento, num período médio de 12 meses, o que equivale a dizer que a taxa de propagação de mandioca varia de 1:5 a 1:10. Embora produza sementes, comercialmente a mandioca é propagada vegetativamente por meio de pedaços de caule. A propagação vegetativa tem a desvantagem de permitir a transmissão de pragas e patógenos entre as gerações sucessivas de cultivo, caso não sejam tomados cuidados com relação à qualidade do material de propagação. Essa duas características, a baixa taxa de multiplicação e a degenerescência causada pelo acúmulo de pragas, contribuem para escassez de manivas de boa qualidade à disposição de agricultores. Um método simples e barato para aumento da taxa de multiplicação, da mandioca é a multiplicação rápida a qual consiste em cortar hastes da planta de mandioca em pedaços com duas ou três gemas, e plantá-los em canteiro cobertos com plásticos transparente, para reter o calor do sol. Esses canteiros são regados frequentemente, e assim, a umidade e a temperatura elevadas induzem as manivas a brotar. Ao atingir o tamanho de 10 a 15 cm, os brotos são cortados e posto em água, para enraizar. Por sua vez, as manivas de duas ou três gemas voltam a brotar, e nisso consiste a capacidade que essa técnica tem de aumentar a taxa de multiplicação da mandioca. As taxas de multiplicação obtidas nesse trabalho variaram entre 1:140 a 1:170, isto é, um aumento de 14 a 17 vezes em relação a taxa de multiplicação convencional da mandioca (1:10). Embora esses índices estejam abaixo do potencial máximo de multiplicação apresentado na literatura ( aumento de 60 vezes), demonstram o potencial da técnica da multiplicação rápida no aumento da taxa de multiplicação da mandioca, em razão da sua simplicidade e baixo custo.

Quantificação dos horizontes húmicos e dinâmica da decomposição de material foliar em solos florestais.

Estudos sobre o balanço entre o carbono estocado na biomassa e o perdido por meio da ecomposição, visando a quantificacão do acúmulo líquido de carbono de um sistema florestal.

The stability of nanosized HZSM-5 zeolite: a high-resolution solid-state NMR study

The thermal and hydrothermal stabilities of HZSM-5 zeolites with crystal sizes less than 100 nm have been studied by multinuclear solid-state NMR, combined with BET and XRD. As evidenced by Al-27 and Si-29 MAS as well as their corresponding cross-polarization/MAS NMR investigations, the thermal stability of nanosized HZSM-5 is not so good as that of microsized HZSM-5. This is due to two processes concerning dealumination and desilicification involved in the calcination of nanosized HZSM-5, while only the dealumination process is conducted in microsized HZSM-5 under the similar calcination process. The hydrothermal stability of nanosized HZSM-5 is, contrary to what was expected, not so bad as that of the microsized HZSM-5 in the course of steam treatment. The actual resistance of the hydrothermal stability to the crystal size of HZSM-5 can be ascribed to an active reconstruction of zeolitic framework through an effective filling of amorphous Si species into nanosized HZSM-5 during hydrothermal treatment. (C) 2001 Published by Elsevier Science B.V.

Educação ambiental tendo o solo como material didático: pintura com tinta de solo e colagem de solo sobre superfícies.

2010