965 resultados para mesh: Tutorial


Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste trabalho foi determinar a composição química, estimar o conteúdo de compostos fenólicos solúveis totais e de fitatos, e avaliar a capacidade antioxidante de grãos integrais de gergelim (Sesamum indicum) creme e preto. Amostras de ambos os tipos de grão foram submetidas a tratamento térmico em estufa de circulação de ar a 150ºC por 10 min e trituradas até granulometria de 20 mesh. O gergelim creme apresentou maior teor de lipídios, carboidratos, fibra alimentar solúvel e valor calórico, enquanto o gergelim preto apresentou maior teor de fibras alimentares insolúvel e total. O gergelim preto apresentou teor de compostos fenólicos solúveis totais de 261,9±7,5 mg em equivalente de ácido gálico (EAG) por 100 g de farinha, aproximadamente duas vezes superior ao do gergelim creme (147,5±31,7 mg por 100 g de EAG). O teor de fitatos do gergelim creme foi duas vezes inferior ao do gergelim preto (0,66±0,06 e 1,36±0,04 g por 100 g de ácido fítico, respectivamente). O gergelim preto apresenta maior potencial funcional relacionado à atividade antioxidante. Contudo, ambos os tipos de gergelim analisados podem ser considerados fontes de compostos antioxidantes naturais.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Enterocystoplasty and gastrocystoplasty have been developed to restore adequate bladder capacity but they still result in the undesired harmful contact of urine with the intestinal mucosa. In an attempt to prevent this nonphysiological interface we performed several modified enterocystoplasties in the mini-pig model using a pedicled, detubularized, de-epithelialized sigmoid patch. Five techniques of patch coverage were used to evaluate urothelial growth or survival on the sigmoid patch. All but 1 patch had intestinal mucosa remnants with mucocele formation. When no coverage was applied or a biodegradable polyglactin mesh was temporarily covering the pedicled, detubularized, de-epithelialized sigmoid patch, severe shrinkage occurred. Partial cover with autologous urothelium islets seemed to decrease shrinkage. Adequate urothelium survival and satisfactory elastic properties of the patch were observed when total cover of the sigmoid patch was achieved with a sheet of homologous urothelium recovering autologous urothelial islets or when the patch was applied to protruding urothelium obtained following sagittal posterior detrusor myotomy.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

En un entorno online la actividad de tutoría de los estudiantes juega un papel fundamental. Su eje central es el acompañamiento del estudiante a lo largo del programa académico que curse, desde el momento en que muestra su interés en matricularse hasta que se titula. La literatura disponible sobre cómo organizar la actividad tutorial en entornos virtuales es escasa. En esta comunicación, basada en la experiencia de la Universitat Oberta de Catalunya (UOC), se analizan dos niveles de especialización de la acción tutorial online. En un primer nivel organizativo, se presenta y evalúa una especialización de la coordinación de la tutoría en función del tipo de conocimiento necesario para ejercerla, académico o administrativo. Esto genera una estructura organizativa de tipo matricial que aporta flexibilidad y conocimiento especializado a la actividad tutorial, y que es valorada muy positivamente por las partes implicadas. En un segundo nivel, se analiza la separación de dos tipos de tutoría especializadas, una de inicio y otra de seguimiento, en función de la antigüedad del estudiante tutorizado. Los resultados de los análisis cualitativos y cuantitativos realizados no permiten concluir que esta segunda forma de especialización contribuya claramente a la mejora de los objetivos de la función tutorial.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El esfuerzo por desarrollar metodologías de enseñanza-aprendizaje específicas para el entorno virtual no ha venido acompañado de un impulso similar para adaptar los mecanismos de coordinación del profesorado, en general, y la actividad de tutoría en particular, a las características de las universidades virtuales. Esta comunicación contribuye a elaborar modelos organizativos que faciliten un buen desarrollo de la acción tutorial en línea. Con este fin, se presentan los principales elementos para estructurar y coordinar la acción tutorial, y se explica el modelo concreto adoptado en la UOC. Finalmente se presenta una valoración de la experiencia que puede ser útil para otras instituciones.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Exposure to solar ultraviolet (UV) radiation is the main causative factor for skin cancer. UV exposure depends on environmental and individual factors, but individual exposure data remain scarce. UV irradiance is monitored via different techniques including ground measurements and satellite observations. However it is difficult to translate such observations into human UV exposure or dose because of confounding factors (shape of the exposed surface, shading, behavior, etc.) A collaboration between public health institutions, a meteorological office and an institute specialized in computing techniques developed a model predicting the dose and distribution of UV exposure on the basis of ground irradiation and morphological data. Standard 3D computer graphics techniques were adapted to develop this tool, which estimates solar exposure of a virtual manikin depicted as a triangle mesh surface. The amount of solar energy received by various body locations is computed for direct, diffuse and reflected radiation separately. The radiation components are deduced from corresponding measurements of UV irradiance, and the related UV dose received by each triangle of the virtual manikin is computed accounting for shading by other body parts and eventual protection measures. The model was verified with dosimetric measurements (n=54) in field conditions using a foam manikin as surrogate for an exposed individual. Dosimetric results were compared to the model predictions. The model predicted exposure to solar UV adequately. The symmetric mean absolute percentage error was 13%. Half of the predictions were within 17% range of the measurements. This model allows assessing outdoor occupational and recreational UV exposures, without necessitating time-consuming individual dosimetry, with numerous potential uses in skin cancer prevention and research. Using this tool, we investigated solar UV exposure patterns with respect to the relative contribution of the direct, diffuse and reflected radiation. We assessed exposure doses for various body parts and exposure scenarios of a standing individual (static and dynamic postures). As input, the model used erythemally-weighted ground irradiance data measured in 2009 at Payerne, Switzerland. A year-round daily exposure (8 am to 5 pm) without protection was assumed. For most anatomical sites, mean daily doses were high (typically 6.2-14.6 SED) and exceeded recommended exposure values. Direct exposure was important during specific periods (e.g. midday during summer), but contributed moderately to the annual dose, ranging from 15 to 24% for vertical and horizontal body parts, respectively. Diffuse irradiation explained about 80% of the cumulative annual exposure dose. Acute diffuse exposures were also obtained for cloudy summer days. The importance of diffuse UV radiation should not be underestimated when advocating preventive measures. Messages focused on avoiding acute direct exposures may be of limited efficiency to prevent skin cancers associated with chronic exposure (e.g., squamous cell carcinomas).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper, an advanced technique for the generation of deformation maps using synthetic aperture radar (SAR) data is presented. The algorithm estimates the linear and nonlinear components of the displacement, the error of the digital elevation model (DEM) used to cancel the topographic terms, and the atmospheric artifacts from a reduced set of low spatial resolution interferograms. The pixel candidates are selected from those presenting a good coherence level in the whole set of interferograms and the resulting nonuniform mesh tessellated with the Delauney triangulation to establish connections among them. The linear component of movement and DEM error are estimated adjusting a linear model to the data only on the connections. Later on, this information, once unwrapped to retrieve the absolute values, is used to calculate the nonlinear component of movement and atmospheric artifacts with alternate filtering techniques in both the temporal and spatial domains. The method presents high flexibility with respect to the required number of images and the baselines length. However, better results are obtained with large datasets of short baseline interferograms. The technique has been tested with European Remote Sensing SAR data from an area of Catalonia (Spain) and validated with on-field precise leveling measurements.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

INTRODUCTION: Hypospadias is associated with anomalies of the urinary tract, but the exact prevalence and significance of these anomalies are still controversial. OBJECTIVES: To assess the percentage of patients with hypospadias and associated urological anomalies, either requiring or not requiring medical or surgical attention. MATERIAL AND METHODS: We searched several databases using the following Mesh terms: hypospadias AND urination, ultrasonography, urinary tract/abnormalities, urinary bladder/radiography, ureteral obstruction, hydronephrosis or vesico-ureteral reflux. Type of uroradiological studies performed, type of urological anomalies, medical or surgical interventions, number of patients available, enrolled and undergoing uroradiological studies and number of patients with abnormal uroradiological exams were recorded. RESULTS: We found 24 studies. Four studies included 100% of available patients. In the other ones, the percentage of patients undergoing uroradiological screening varied from 12 to 82%. Frequency of anomalies varied from 0 to 56%. The most common anomalies were kidney position anomalies, vesico-ureteral reflux and hydronephrosis. CONCLUSIONS: The data published about screening patients with hypospadias for associated anomalies of their urinary tract are of poor quality. The clinical significance of the anomalies found is difficult to evaluate. We found no relationship between the severity of the hypospadias and associated anomalies of the upper or lower urinary tract.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Abstract:The objective of this work was to evaluate the effect of grazing intensity on the decomposition of cover crop pasture, dung, and soybean residues, as well as the C and N release rates from these residues in a long-term integrated soybean-beef cattle system under no-tillage. The experiment was initiated in 2001, with soybean cultivated in summer and black oat + Italian ryegrass in winter. The treatments consisted of four sward heights (10, 20, 30, and 40 cm), plus an ungrazed area, as the control. In 2009-2011, residues from pasture, dung, and soybean stems and leaves were placed in nylon-mesh litter bags and allowed to decompose for up to 258 days. With increasing grazing intensity, residual dry matter of the pasture decreased and that of dung increased. Pasture and dung lignin concentrations and C release rates were lower with moderate grazing intensity. C and N release rates from soybean residues are not affected by grazing intensity. The moderate grazing intensity produces higher quality residues, both for pasture and dung. Total C and N release is influenced by the greater residual dry matter produced when pastures were either lightly grazed or ungrazed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tämän työn tarkoituksena on selvittää, miten höyryn kosteuden erotus toimii Kemijärven Sellun soodakattilassa. Höyryn kosteuden erotuksen toiminta tarkastetaan määrittämällä höyryn kosteus tulistetussa höyryssä. Höyryyn kulkeutuvan kattilaveden määrä määritettiin käyttäen merkkiaineena natriumia, jota kulkeutuu höyryyn kattilavesipisaroiden sekä ruiskutusveden mukana. Pieniä määriä kulkeutuu myös haihtumalla, mikä on otettu laskuissa huomioon. Kattilaveden ja höyryn natriumpitoisuuksien suhteen perusteella lasketaan kosteusprosentti. Kattilaveden kulkeutuessa höyryyn kulkeutuu veden mukana myös epäpuhtauksia, jotka turbiiniin joutuessaan saattavat aiheuttaa korroosiota sekä kerrostumia turbiinin siivistössä. Kosteuden erotuksen parantamiseksi on esitetty muutosehdotus siten, että nykyinen poimulevyerottimilla toteutettu sekundäärierotus korvattaisiin uudella teräsverkkoerottimella. Tällöin pystyttäisiin poistamaan entistä pienempiä pisaroita ja vähentämään höyryyn kulkeutuvan kattilaveden määrää.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The decomposition process of Ruppia cirrhosa was studied in a Mediterranean coastal lagoon in the Delta of the River Ebro (NE Spain). Leaves and shoots of Ruppia were enclosed in 1 mm-mesh and 100 pm-mesh litter bags to ascertain the effect of detritivores, macroinvertebrates, and bacteria and fungi, respectively. Changes in biomass and carbon, and, nitrogen and phosphorus concentrations in the detritus were studied at the sediment-water interface and in the sediment. Significant differences in biomass decay were observed between the two bag types. Significant differences in decomposition were observed between the two experimental conditions studied using 100 pm-mesh bags. These differences were not significant when using the 1 mm-mesh bags. The carbon content in the detritus remained constant during the decomposition process. The percentage of nitrogen increased progressively from an initial 2.4 % to 3 %. The percentage of phosphorus decreased rapidly during the first two days of decomposition from an initial 0.26 % to 0.17 %. This loss is greater in the sediment than in the water column or at the sediment-water interface. From these results we deduce that the activity of microorganisms seems to be more important in the sediment than in the water-sediment interface, and that grazing by macroinvertebrates has less importance in the sediment than in the water column.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As frutíferas de clima temperado apresentam o fenômeno da dormência. Na saída da dormência, há a conversão do amido para açúcares solúveis, como substrato para a retomada de crescimento na primavera. Visando à maior compreensão da fisiologia das plantas em respostas a eventos, como as variações climáticas, estresses e problemas de adaptação, desenvolveu-se este trabalho, no Laboratório de Fisiologia Vegetal da Embrapa Clima Temperado, com o objetivo de descrever uma metodologia para a determinação das concentrações dos açúcares solúveis (frutose, sorbitol, alfa-glicose, beta-glicose e sacarose), em tecidos vegetais de frutíferas, via cromatografia gasosa. O cromatógrafo utilizado para as análises dos açúcares por essa metodologia é o GAS CHROMATOGRAPH e a coluna do tipo Packed Column J. K. de 3,2mm de diâmetro por 2m de comprimento, empacotada com Silicone SE-52 Uniport HP 80/100 mesh. Através da cromatografia gasosa, obtêm-se eficiência e resolução cromatográfica, para análises de açúcares solúveis, sendo, desta forma, vantajoso e executável esse tipo de análise pelo método descrito.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

PURPOSE: Incisional hernia (IH) is one of the most frequent postoperative complications. Of all patients undergoing IH repair, a vast amount have a hernia which can be defined as a large incisional hernia (LIH). The aim of this study is to identify the preferred technique for LIH repair. METHODS: A systematic review of the literature was performed and studies describing patients with IH with a diameter of 10 cm or a surface of 100 cm2 or more were included. Recurrence hazards per year were calculated for all techniques using a generalized linear model. RESULTS: Fifty-five articles were included, containing 3,945 LIH repairs. Mesh reinforced techniques displayed better recurrence rates and hazards than techniques without mesh reinforcement. Of all the mesh techniques, sublay repair, sandwich technique with sublay mesh and aponeuroplasty with intraperitoneal mesh displayed the best results (recurrence rates of <3.6%, recurrence hazard <0.5% per year). Wound complications were frequent and most often seen after complex LIH repair. CONCLUSIONS: The use of mesh during LIH repair displayed the best recurrence rates and hazards. If possible mesh in sublay position should be used in cases of LIH repair.