(Table 1, page 605) Chemistry of concretions from Grand Lake (GL) and Ship Harbour Lake (SH), Nova Scotia and Mosque Lake (ML), Ontario

Studies by optical microscopy, x-ray diffraction, and electron probe techniques of ferromanganese concretions from three Canadian lakes reveal chemical banding of amorphous hydrated iron and manganese oxides. The average ratio of iron to manganese in concretions from these lakes varies from 0.43 to 2.56. The concentrations of cobalt, nickel, copper, and lead are one to two orders of magnitude below those reported for oceanic ferromanganese concretions.

Radionuclides measured on water bottle samples

Actinium is one of the rarest naturally occurring elements on earth. We measured its longest-lived isotope 227Ac (half-life 21.77 yr) for the first time in the water column of the Southeast Pacific, the Central Arctic, the Antarctic Circumpolar Current (ACC) and the Weddell Gyre (WG). Besides the profile in the Southeast Pacific, which confirms earlier findings about the role of diapycnal mixing for 227Ac distribution, we found three other different types of vertical profiles. These profiles point to a prominent role of advection for 227Ac distribution, especially in the Southern Ocean. Depending on the type of profile found, 227Ac is proposed as a tracer for different oceanographic questions. In the Southern Ocean, up to 4.93±0.32 dpm/m**3 227Ac is found close to the sea floor, which is the highest concentration ever observed in the ocean. Close to the sea surface in the WG, 0.46±0.05 dpm/m**3 227Acex (227Ac in excess of its progenitor 231Pa) is detected. We use 227Acex there to determine the upwelling velocity in the Eastern WG to be about 55 m/yr. In the ACC, Upper and Lower Circumpolar Deep Water (UCDW and LCDW) are found to differ clearly in their 227Acex activity. High 227Acex activities are therefore a promising tracer for recent inputs of LCDW to the sea surface, which may help to understand the role of deep upwelling for iron inputs into Antarctic surface waters. The expected release of 227Ac is compared with 228Ra to make sure that the large near-surface excess in the water column of the Southern Ocean is not due to lateral inputs by isopycnal mixing. Data from the Central Arctic and from a transect across the ACC confirm that 228Ra and 227Acex differ strongly in their sources. The first measurements of 227Ac on suspended matter (less than 1.7% of total 227Ac close to the sea floor) indicate that the particle reactivity of 227Ac is negligible in the open ocean, in agreement with earlier findings [Y. Nozaki, Nature 310 (1984) 486-488]. Despite the extremely low concentrations of 227Ac, new measurement techniques [W.S. Moore, R. Arnold, J. Geophys. Res. 101 (1996) 1321-1329] point to a comfortable and comparably simple determination of 227Ac in the future. Finally, 227Acex may become a widely used deep-sea specific tracer.

Point clouds of measurements in the Dechen Cave near Iserlohn, Germany

Modeling natural phenomena from 3D information enhances our understanding of the environment. Dense 3D point clouds are increasingly used as highly detailed input datasets. In addition to the capturing techniques of point clouds with LiDAR, low-cost sensors have been released in the last few years providing access to new research fields and facilitating 3D data acquisition for a broader range of applications. This letter presents an analysis of different speleothem features using 3D point clouds acquired with the gaming device Microsoft® Kinect. We compare the Kinect sensor with terrestrial LiDAR reference measurements using the KinFu pipeline for capturing complete 3D objects (< 4m**3). The results demonstrate the suitability of the Kinect to capture flowstone walls and to derive morphometric parameters of cave features. Although the chosen capturing strategy (KinFu) reveals a high correlation (R2=0.92) of stalagmite morphometry along the vertical object axis, a systematic overestimation (22% for radii and 44% for volume) is found. The comparison of flowstone wall datasets predominantly shows low differences (mean of 1 mm with 7 mm standard deviation) of the order of the Kinect depth precision. For both objects the major differences occur at strongly varying and curved surface structures (e.g. with fine concave parts).

Time exposure photography of smoke plumes /

The advantages of using time exposures to "integrate" plume behavior have been known for some time. The purpose of this writing is to acquaint the research worker with more comprehensive techniques of long (up to nine hours) time exposures, with several illustrations.

Discussion of the precision of measurements : with examples taken mainly from physics and electrical engineering /

Advertising section at the end of the book.

Illuminating Inner Life : A Comparison of Virginia Woolf's To the Lighthouse and Arthur Schnitzler's Fräulein Else

In the early 20th century, authors increasingly experimented with literary techniques striving towards two common aims: to illumine the inner life of their protagonists and to diverge from conventional forms of literary representations of reality. This shared endeavour was sparked by changes in society: industrialisation, developments in psychology, and the gradual decay of empires, such as the Victorian (1837–1901) and the Austro-Hungarian (1867–1918). Those developments yielded a sense of uncertainty and disorientation, which led to a so-called “turn [inwards]” in the arts (Micale 2). In this context, this essay examines Virginia Woolf’s (1882–1941) development of her literary technique by comparing To the Lighthouse (1927), written in free indirect discourse, with Arthur Schnitzler’s (1862–1932) Fräulein Else (1924), written in interior monologue. Instead of applying Freud’s theories of consciousness, I will demonstrate how empiricist psychology informed and partly helped shape the two narrative techniques by referring to Ernst Mach’s (1838–1916) idea of the unstable self, and William James’ (1842–1910) concept of the stream of consciousness. Furthermore, I will show that there is a continuous progression of literary ideas from Schnitzler’s Viennese fin-de-siècle connected to impressionism, towards Woolf’s Bloomsbury aesthetics connected to Paul Cézanne’s post-impressionist logic of sensations. In addition to that, I address how the women’s movement, starting in the end of the 19th century, inspired Woolf and Schnitzler to utilise their techniques as a means of revealing women’s restricted position in society. Methodologically, I will analyse the two novels’ narrative techniques applying close reading and by that point out their differences and similarities in connection to the above-mentioned theories as well as the two author’s literary approaches. I argue that this comparison demonstrates that modernist literary techniques of representing interiority evolved from interior monologue towards free indirect discourse. This progression also implicates that modernism can be seen as a continuum reaching back to the fin-de-siècle and culminating in the 1920s. 

Tracing Hybrid Collectives of Illness, War, and Medicine in Twentieth- and Twenty-First Century Narratives of Illness

Thesis (Ph.D.)--University of Washington, 2016-06

Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of an organoclay on resin cure

The influence of an organically modified clay on the curing behavior of three epoxy systems widely used in the aerospace industry and of different structures and functionalities, was studied. Diglycidyl ether of bisphenol A (DGEBA), triglycidyl p-amino phenol (TGAP) and tetraglycidyl diamino diphenylmethane (TGDDM) were mixed with an octadecyl ammonium ion modified organoclay and cured with diethyltoluene diamine (DETDA). The techniques of dynamic mechanical thermal analysis (DMTA), chemorheology and differential scanning calorimetry (DSC) were applied to investigate gelation and vitrification behavior, as well as catalytic effects of the clay on resin cure. While the formation of layered silicate nanocomposite based on the bifunctional DGEBA resin has been previously investigated to some extent, this paper represents the first detailed study of the cure behavior of different high performance, epoxy nanocomposite systems.

Optimising care of acute coronary syndromes in three Australian hospitals

Objective. To improve quality of in-hospital care of patients with acute coronary syndromes using a multifaceted quality improvement program. Design. Prospective, before and after study of the effects of quality improvement interventions between October 2000 and August 2002. Quality of care of patients admitted between 1 October 2000 and 16 April 2001 (baseline) was compared with that of those admitted between 15 February 2002 and 31 August 2002 (post-intervention). Setting. Three teaching hospitals in Brisbane, Australia. Study participants. Consecutive patients (n = 1594) admitted to hospital with acute coronary syndrome [mean age 68 years (SD 14 years); 65% males]. Interventions. Clinical guidelines, reminder tools, and educational interventions; 6-monthly performance feedback; pharmacist-mediated patient education program; and facilitation of multidisciplinary review of work practices. Main outcome measures. Changes in key quality indicators relating to timing of electrocardiogram (ECG) and thrombolysis in emergency departments, serum lipid measurement, prescription of adjunctive drugs, and secondary prevention. Results. Comparing post-intervention with baseline patients, increases occurred in the proportions of eligible patients: (i) undergoing timely ECG (70% versus 61%; P = 0.04); (ii) prescribed angiotensin-converting enzyme inhibitors (70% versus 60%; P = 0.002) and lipid-lowering agents (77% versus 68%; P = 0.005); (iii) receiving cardiac counselling in hospital (57% versus 48%; P = 0.009); and (iv) referred to cardiac rehabilitation (17% versus 8%; P < 0.001). Conclusions. Multifaceted approaches can improve care processes for patients hospitalized with acute coronary syndromes. Care processes under direct clinician control changed more quickly than those reliant on complex system factors. Identifying and overcoming organizational impediments to quality improvement deserves greater attention.

The effects of body position on distortion-product Otoacoustic emission testing

Otoacoustic emissions are frequently acquired from patients in a variety of body positions aside from the standard, seated orientation. Yet little knowledge is available regarding whether these deviations will produce nonpathological changes to the clinical results obtained. The present study aimed to describe the effects of body position on the distortion-product otoacoustic emissions of 60 normal-hearing adults. With particular attention given to common clinical practice, the Otodynamics ILO292, and the measurement parameters of amplitude, signal-to-noise ratio, and noise were utilized. Significant position-related effects and interactions were revealed for all parameters. Specifically, stronger emissions in the mid frequencies and higher noise levels at the extreme low and high frequencies were produced by testing subjects while lying on their side compared with the seated position. Further analysis of body position effects on emissions is warranted, in order to determine the need for clinical application of position-dependent normative data.

Thermal injuries in three children caused by an electrical warming mattress

Peroperative hypothermia is recognized to increase mortality and morbidity, and the paediatric anaesthetist faces specific challenges resulting from the increased body surface to volume ratio, particularly in smaller children. We describe three children who were consecutive patients on one operating list and sustained severe thermal injuries. These were due to a malfunctioning electrical heating mat, despite appropriate use and monitoring by the attending anaesthetist. It is rare for thermal warming devices to cause injury. We review the use of heating mats, and suggest modifications in their manufacture which may minimize the risks associated with heating devices.

Transmission of optical coherent-state qubits

We discuss the long-distance transmission of qubits encoded in optical coherent states. Through absorption, these qubits suffer from two main types of errors, namely the reduction of the amplitude of the coherent states and accidental application of the Pauli Z operator. We show how these errors can be fixed using techniques of teleportation and error-correcting codes.

The surgical management of consecutive exotropia

Purpose: To review the results and techniques of surgical treatment of consecutive exotropia. Methods: We performed a retrospective chart review of all patients who underwent surgery for consecutive exotropia in a pediatric ophthalmology practice between 1992 and 2001. Patients were excluded if follow-up lasted < 6 weeks or if exotropia was caused by other ocular disorders such as previous trauma or congenital cataracts. Results: Fifty-nine patients were identified. The procedure performed in the majority of cases was unilateral lateral rectus recession and medial rectus advancement to the original insertion. Seven patients underwent bilateral lateral rectus recession, and 6 underwent lateral rectus recession combined with medial rectus resection. The mean interval between original surgery and surgery for consecutive exotropia was 14.1 years (range 4 months to 47.5 years). The mean preoperative distance exodeviation was 31.7 prism diopters (PD). Satisfactory alignment lie, within 10 PD of orthophoria) was achieved in 36 patients (61%) at week 1 and 42 patients (71%) at final follow-up. Mean follow up was 16.0 months. Thirty-nine patients (66%) demonstrated an exodrift after surgery (mean 7.6 PD). Conclusion: Consecutive exotropia may occur many years, even decades, after esotropia surgery. Lateral rectus recession with advancement of the previously recessed medial rectus is an effective treatment. An exotropic drift occurs after consecutive exotropia surgery, usually within the first 6 weeks. A suitable ocular alignment immediately after surgery for consecutive exotropia is a small-angle esotropia of 5 to 10 PD.

A full cost environmental accounting experiment

A lack of appropriate measurement techniques has constrained full cost environmental accounting (FCEA) experimentation. Yet, there has been little research on the applicability of valuation techniques recently developed by environmental economists within FLEA frameworks. This paper examines a reporting experiment using these valuation techniques that was undertaken by an Australian Government Department managing publicly owned forests. The FCEA experiment was ultimately not successful. However, the implementation experiences of the Department including the reactions of its managers and stakeholders provide an opportunity to critically reflect on the experimental outcomes to extend the current empirical knowledge of corporate social responsibility reporting. Such critical reflection has not been common in past FCEA experimentation. © 2005 Elsevier Ltd. All rights reserved.