Quimiometria II: planilhas eletrônicas para cálculos de planejamentos experimentais, um tutorial

This work describes, through examples, a simple way to carry out experimental design calculations applying an spreadsheets. The aim of this tutorial is to introduce an alternative to sophisticated commercial programs that normally are too complex in data input and output. An overview of the principal methods is also briefly presented. The spreadsheets are suitable to handle different types of computations such as screening procedures applying factorial design and the optimization procedure based on response surface methodology. Furthermore, the spreadsheets are sufficiently versatile to be adapted to specific experimental designs.

Image Segmentation Using Information Bottleneck Method

In image processing, segmentation algorithms constitute one of the main focuses of research. In this paper, new image segmentation algorithms based on a hard version of the information bottleneck method are presented. The objective of this method is to extract a compact representation of a variable, considered the input, with minimal loss of mutual information with respect to another variable, considered the output. First, we introduce a split-and-merge algorithm based on the definition of an information channel between a set of regions (input) of the image and the intensity histogram bins (output). From this channel, the maximization of the mutual information gain is used to optimize the image partitioning. Then, the merging process of the regions obtained in the previous phase is carried out by minimizing the loss of mutual information. From the inversion of the above channel, we also present a new histogram clustering algorithm based on the minimization of the mutual information loss, where now the input variable represents the histogram bins and the output is given by the set of regions obtained from the above split-and-merge algorithm. Finally, we introduce two new clustering algorithms which show how the information bottleneck method can be applied to the registration channel obtained when two multimodal images are correctly aligned. Different experiments on 2-D and 3-D images show the behavior of the proposed algorithms

Viewpoint-Based Ambient Occlusion

We've developed a new ambient occlusion technique based on an information-theoretic framework. Essentially, our method computes a weighted visibility from each object polygon to all viewpoints; we then use these visibility values to obtain the information associated with each polygon. So, just as a viewpoint has information about the model's polygons, the polygons gather information on the viewpoints. We therefore have two measures associated with an information channel defined by the set of viewpoints as input and the object's polygons as output, or vice versa. From this polygonal information, we obtain an occlusion map that serves as a classic ambient occlusion technique. Our approach also offers additional applications, including an importance-based viewpoint-selection guide, and a means of enhancing object features and producing nonphotorealistic object visualizations

Pharmaceuticals occurrence in a WWTP with significant industrial contribution and its input into the river system

Occurrence and removal of 81 representative Pharmaceutical Active Compounds (PhACs) were assessed in a municipal WWTP located in a highly industrialized area, with partial water reuse after UV tertiary treatment and discharge to a Mediterranean river. Water monitoring was performed in an integrated way at different points in the WWTP and river along three seasons. Consistent differences between therapeutic classes were observed in terms of influent concentration, removal efficiencies and seasonal variation. Conventional (primary and secondary) treatment was unable to completely remove numerous compounds and UV-based tertiary treatment played a complementary role for some of them. Industrial activity influence was highlighted in terms of PhACs presence and seasonal distribution. Even if global WWTP effluent impact on the studied river appeared to be minor, PhACs resulted widespread pollutants in river waters. Contamination can be particularly critical in summer in water scarcity areas, when water flow decreases considerably

La desigualdad en el consumo familiar. Diferencias de género en la España contemporánea (1850-1930)

In the last few years, Economic Theory has revised two basic ideas around the economics of the household: that family income is the result of the individual income of each of its members (income pooling), and that all family members living in the household have equal access to its resources. Unequal access to family resources (among women and men, on the one hand, and among the elderly, adults and children, on the other), is now understood as an input (for instance, that women eat less food and of worst quality than men), and as an output (for instance that women have poorer health, higher epidemic mortality, or are less tall than men as a result, among other things, of having received less food and poorer medical care, and/or of a heavier workload). Despite the fact that inequality in intra‐family consumption has become the center of attention in academic and international agencies, it can still not be found in the agenda of Economic History. In this paper we look at some of the resources consumed by Spanish families in the 19th century: food, alcoholic beverages, clothes and shoes. Medical topographies, our main source, suggest that unequal access to family resources among household members had a strong impact on their health and wellbeing.

Tasasähkönjakeluverkon vaihtosuuntaaja galvaanisella erotuksella

Suomessa sähkönjakeluverkko koostuu pääasiassa 20 kV ja 400 V jännitetasoista. Tällöin sähkö viedään lähelle kuluttajia suuremmalla jännitetasolla ja muunnetaan alhaisemmaksi lähellä asiakkaita. Haittapuolena on se, että haja-asutusalueilla jakelumuuntajien määrä kasvaa suureksi, koska ne täytyy sijoittaa lähelle kuluttajaa. Vaihtoehtona on toteuttaa osa sähkönjakelusta tasajännitteellä, jolloin tehollinen jännite olisi suurempi. Tällöin sähköä voitaisiin siirtää pidempiä matkoja ilman, että asiakaskohtaisia tai muutaman asiakkaan kattavia 20 kV siirtolinjoja tarvitsisi käyttää. Tämä taasen edellyttää asiakaskohtaisien vaihtosuuntaajien käyttöä. Tässä työssä esiteltävällä 1 kVA vaihtosuuntaajalla muodostetaan tasasähköjakeluverkosta saatavasta 750 V tasasähköstä yksivaiheista (230 VRMS, 50 Hz) verkkojännitettä. Laite on suunniteltu toteuttamaan galvaaninen erotus mahdollisimman hyvän hyötysuhteen puitteissa. Vaihtosuuntaaja on toteutettu käyttämällä resonanssikonvertteria, joka vaihtosuuntaa jakelujännitteen korkeataajuiseksi vaihtojännitteeksi. Tämän jälkeen toteutetaan galvaaninen erotus käyttäen suurtaajuusmuuntajaa. Tätä seuraa syklokonvertteri, joka pulssintiheysmodulaatiota soveltaen muodostaa lähtöjännitteen. Tämä suodatetaan lopuksi LC- alipäästösuotimella säröltään standardin mukaiseksi. Laite on jaettu työssä kolmeen osaan, joista jokaisen toiminta on selitetty ja simuloitu itsenäisesti. Lopussa koko järjestelmä on simuloitu yhtenä kokonaisuutena. Hyötysuhteeksi arvioitiin karkeasti 94 % ja lopullisista tuloksista voidaan päätellä, että laitteen toteuttaminen prototyypiksi voisi olla kannattavaa.

D-luokan audiovahvistimen pääteastetopologioiden vertailu kitaravahvistinsovelluksessa

Tässä työssä tutkitaan D-luokan audiovahvistimen pääteastetopologioiden eroja teknisen toiminnan, käytännön toteutuksen ja audiosignaalin laadun näkökulmista. Tutkimuksen perusteella valitaan yksi topologia kitaravahvistinsovellukseen, jossa modulointi on toteutettu Sigma-Delta-modulaattorilla. Pääteastetopologioiden tekninen toiminta selvitetään yksityiskohtaisesti virtojen kulkureittien avulla. Simulaatioilla tutkitaan suoja-ajan ja tulosignaalin variaatioiden vaikutusta lähtösignaalin kokonaisharmoniseen säröön (THD) ja selvitetään signaalin säröytymiseen vaikuttavien tekijöiden syitä D-luokan vahvistimen pääteasteessa.

Julkishallinnon sähköisten palveluiden arkkitehtuurit

Sähköinen asiointi on yleistynyt viime vuosien aikana nopeasti. Toimivia julkishallinnon sähköisiä palveluita kehitetään jatkuvasti yhä uusiin tarkoituksiin. Tällä hetkellä sähköisten palveluiden tarjontaa leimaa hajanaisuus. Jokainen palveluita tarjoava organisaatio kehittää palveluita itsenäisesti, omalla tavallaan. Palveluiden kehittäminen asiakaslähtöisesti edellyttää palvelukokonaisuuksien suunnittelua arkkitehtuuritasolla. Yksittäisten sovellusten kehittämisen lisäksi on huomioitava näiden sovellusten toimivuus yhteen, osana suurempaa kokonaisuutta. Palvelukeskeisessä arkkitehtuurisuunnittelussa lähtökohta on se, että jokainen yksittäinen sovellus on itsessään palvelu, joka tuottaa määritelmänsä mukaisen tulosteen sellaisessa muodossa, jota muut sovellukset kykenevät ymmärtämään. Työn tuloksena havaittiin, että vaikka sähköiselle hallinnolle on kehitetty useita viitearkkitehtuureja, on käytännön työ palveluiden integroimiseksi vielä kesken. Yksittäisten palveluiden liittäminen suuremmiksi kokonaisuuksiksi vaatii määrätietoista arkkitehtuurisuunnittelua sekä kansallista suunnittelun koordinointia. Tiedon jakaminen organisaatiorajojen yli muodostaa joukon kysymyksiä, joihin ei ole vielä vastausta. Tietosuojaa ja yksityisyyttä ei voida uhrata sähköistä hallintoa suunniteltaessa.

Tuottavuuden mittaaminen ja johtaminen Etelä-Karjalan keskussairaalassa

Tutkimuksen tavoitteena oli arvioida, miten tuottavuustietoa voidaan hyödyntää johtamisen tukena ja kuinka tuottavuustietoa tällä hetkellä hyödynnetään Etelä-Karjalan keskussairaalassa (EKKS). Tuottavuuden mittaamisessa hyödynnetään Terveyden- ja hyvinvoinnin laitoksen (THL) vuosittain julkaisemassa Hoito-toiminnan tuottavuus -tilastossa käytettävää tuottavuuden mittaamismenetelmää, jossa panoksina ovat sairaalan tai erikoisalan hoitotoiminnasta aiheutuneet kustannukset ja tuotoksina NordDRG-ryhmittelijän avulla painotetut hoitojaksot ja käynnit. Tutkimuksessa arvioitiin tuottavuuden mittaamiseen liittyvien mahdollisten virhetekijöiden vaikutusta sairaalan tuottavuuteen EKKS:n tapauksessa ja tämän perusteella tunnistettiin, miten THL:n julkaisemaa tuottavuustilastoa ja sisäistä tuottavuustietoa voidaan hyödyntää sairaalan johtamisen tukena. Pääasiallisena aineistona työssä käytettiin EKKS:n henkilöstön haastatteluja ja sairaalan taloudellisia raportteja sekä THL:n julkista ja julkaisematonta aineistoa. THL:n kehittämän hoitotoiminnan tuottavuuden mittaamismenetelmän havaittiin soveltuvan yksittäisen sairaalan käyttöön tietyin muutoksin. Vaadittavien muutosten lisäksi tutkimuksessa tunnistettiin taustatekijät, jotka THL:n tuottavuustilaston ja sisäisen tuottavuustiedon tulkitsijan tulee ottaa huomioon. EKKS:n tuottavuustietojen keruussa havaittiin kehittämiskohteita, joita paran-tamalla tuottavuustiedon luotettavuutta ja hyödynnettävyyttä voidaan edelleen kehittää. Tuottavuustiedon hyödyntämistä voidaan niin ikään edelleen kehittää EKKS:ssa.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Formal and informal mechanisms for knowledge protection and sharing

The most important knowledge in firms is mostly tacit and embedded in individuals within the organization. This background knowledge that firms possess is used for creation of new knowledge and innovations. As firms today greatly concentrate on their core competencies, they need external knowledge from various collaboration partners. Thus, collaborative relationship governance, as well as control (use of appropriability mechanisms) over background (the input from each firm in innovative activities) and foreground knowledge (the output of collaboration activities) is needed in order to successfully create and capture value from innovative activities without losing core knowledge and competitiveness. Even though research has concentrated on knowledge protection and knowledge sharing, studies that combine both of these views and examine the effects of sharing and protection on value creation and capture have been rather limited. Studies have mainly focused on the protection of the output of innovation while forgetting the protection of the input of innovation. On the other hand, as the research concentrating on the output of innovation tends to favor formal mechanisms, informal mechanisms have remained more unknown to researchers as well as managers. This research aims to combine the perspectives of knowledge sharing and knowledge protection and their relationship with value creation and value capture. The sharing and protection are viewed from two points of view: the use of appropriability mechanisms, as well as governance of the collaborative relationship. The study consists of two parts. The first part introduces the research topic and discusses the overall results. The second part comprises six complementary research publications. Both qualitative and quantitative research methods are used in the study. In terms of results, the findings enhance understanding of the combined use of formal and informal mechanisms for knowledge protection and sharing. Informal mechanisms appear to be emphasized in the protection of background knowledge, and thus are prerequisites for innovation, whereas formal mechanisms are relied on more for protecting the results of innovative activities. However, the simultaneous use of the formal and informal mechanisms that are relevant to the particular industry and innovation context is recommendedthroughout the collaborative innovation process. Further, the study adds to the current knowledge on HRM as an appropriability mechanism: on the firm level its uses include assessing and hedging against employee-related risks such as knowledge leaking and knowledge leaving. A further contribution is to the research on HRM protection and its interrelations with other appropriability mechanisms, its constituents, and its potential use in the area of knowledge protection.

Galvaanisen erotuksen toteuttaminen tasavirtasähkönjakelun asiakaspäätelaitteessa

Suomessa sähkönjakeluverkon pääasialliset jännitetasot ovat 20 kV ja 400 V. 20 kV jännitetasolla sähkö viedään lähelle kuluttajia ja muunnetaan pienemmäksi lähellä asiakkaita. Haittapuolena on se, että 20 kV avojohtosähkönsiirtoverkko on hyvin vika-altis ja usein yhden haaran vikaantuessa monta muutakin jää ilman sähköä. Lisäksi hintavien ja suurien jakelumuuntajien määrä on suuri. Vaihtoehtona on toteuttaa osa sähkönjakelusta tasajännitteellä, jolloin tehollinen pienjännite olisi 400 V:a suurempi. Tällöin sähköä voitaisiin siirtää pidempiä matkoja ilman, että asiakaskohtaisia tai muutaman asiakkaan kattavia 20 kV siirtolinjoja tarvitsisi käyttää. Tämä edellyttää vaihtosuuntauksen toteuttamista kuluttajan päässä. Tässä työssä esiteltävällä 1 kVA:n tehoisella vaihtosuuntaajalla muodostetaan tasasähköjakeluverkosta saatavasta 750 V tasasähköstä yksivaiheista (230 VRMS, 50 Hz) verkkojännitettä. Laite on suunniteltu toteuttamaan galvaaninen erotus mahdollisimman hyvällä hyötysuhteella. Suurtaajuusmuuntajan mitoitus mahdollisimman hyvälle hyötysuhteelle on haastava tehtävä, koska vaatimuksia sille asettavat sekä syöttävä resonanssikonvertteri että syötettävä syklokonvertteri. Mitoituksessa on pyrittävä löytämään mahdollisimman hyvä hyötysuhde kustannusten ja toteutettavuuden suhteen.

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Analogisten erotusvahvistimien nykytilan kartoitus

Erotusvahvistin on instrumentointivahvistin, jonka tulo ja lähtö ovat galvaanisesti erotettu toisistaan. Erotusvahvistimia käytetään galvaanista erotusta vaativissa sovelluksissa, muun muassa sairaalalaitteissa. Teollisuudessa on olemassa sovelluksia, joihin tarvittaisiin analogisia erotusvahvistimia, mutta ei tiedetä onko analogisilla erotusvahvistimilla riittävän hyvät komponenttiarvot. Tässä työssä selvitetään analogisten erotusvahvistimien tämänhetkisiä ominaisuuksia, hintoja ja komponenttiarvoja neljältä eri valmistajalta.