Influência da adição no comportamento reológico da pasta autoadensável de alto desempenho

Influence of admixture on the rheological behavior of high performance self-compacting paste. This research proposes to study the influence of the specific area, mould and surface texture of admixtures on the rheological behavior of high performance self-compacting paste (HPSCP). The selected admixtures are calcareous filler and basalt filler, which are industrial residues, thus contributing to sustainable development. The paste is made up of cement, silica fume, calcareous filler or basalt filler, water and superplasticizer additive. For this study, the water/cement ratios are fixed = 0.40 L kg(-1); silica fume/cement = 0.10 kg kg(-1); the filler/cement and superplasticizer/cement ratios are determined through Marsh cone and mini-slump tests. The results show that for same filler/cement ratios, the ratios of superplasticizer to paste with calcareous filler are significantly lower than those of paste with basalt filler. The results show that the specific area, mould and surface texture of these admixtures significantly influence the rheological behavior of HPSCP.

Estudo da influência de linfócitos tcd-8 e das células nk em casos de carcinoma epidermóide de lábio inferior sem metástase e com metástase e sua relação com a progressão da lesão

The presence of inflammatory cells within the tumor microenvironment plays a dual role that may contribute both to the progression and for inhibition of tumor growth. Recent studies suggest that the quality, not the quantity, of the inflammatory infiltrate is the most important determinant for prognosis. Therefore, TCD8 cells and natural killer cells are the main effector cells in combating cancer. The aim of this study was to assess, through the immunohistochemical study, the expression of TCD8 lymphocytes and NK cells in epidermoid carcinoma (EC) of the lower lip. The sample consisted of 32 specimens of EC of the lower lip, of which 16 had regional lymph node metastasis, and the 16 remaining, free of metastases. The total number of positive cells at the front of invasion were evaluated quantitatively and the results were related to clinical TNM staging, histological grade of malignancy and prognostic factors. It was observed for the group with metastasis, prevalence of stages III and IV (p<0.0001). Most patients with metastasis, had a high grade of malignancy (p=0.006). Most cases classified as high grade of malignancy had stages III and IV (p=0.032). Of the total sample, there were three cases of recurrence and five with death, however these variables were not statistically significant when associated with clinicopathological parameters. The immunostaining of CD8 and CD57, respectively, showed no statistically significant association with any of the clinicopathological parameters studied, metastasis (p=0.346, p=0.622), TNM classification (p=0.146, p=0.576), histological grade of malignancy (p=0.936, p=936), recurrence (p=0.075, p=0.075) and death (p=0.897, p=0.856). Believing in the function of the immunological system against malignant cells, it is concluded that the TD8 lymphocytes and NK cells, would be acting in the control of the progression of malignant neoplasms, but not in isolated manner

Influência do tratamento periodontal sobre os níveis da proteína c-reativa ultrassensível em pacientes com insuficiência renal crônica em fase de prétransplante

The present study evaluated the influence of non-surgical periodontal treatment on the levels of C- reactive protein (hsCRP) in patients with chronic renal failure (CRF) in pretransplant. We conducted a controlled and randomized trial to evaluate the periodontal condition and plasma concentrations of hsCRP, albumin and transferrin in 56 dialysis patients divided into two groups: experimental and control. The study was conducted at the dental clinic of Family and Community Health s Unit (USFC), located in Onofre Lopes University Hospital (HUOL), Federal University of Rio Grande do Norte (UFRN), from December 2010 to November 2011. Severe periodontitis was the type of periodontal disease more common, affecting 78.6% of patients. Periodontal conditions, evaluated through the means of probing depth, clinical attachment level, bleeding index and plaque index, proved to be uniform for both groups at the initial examination. There were no differences in levels of inflammatory markers between the two groups. The analysis of the concentrations of hsCRP allowed classifying study participants as at high risk of developing cardiovascular disease. After completion of periodontal treatment in the experimental group, there was a statistically significant reduction of the mean of all periodontal parameters assessed; however this improvement of periodontal health was not accompanied by changes in the levels of hsCRP, albumin and transferrin in the evaluation time. Given this, the periodontal treatment did not promote the reduction of systemic inflammatory burden and risk of cardiovascular complications in patients with CRF

Influência da Dureza dos Discos Abrasivos no Corte de Materiais Dúcteis

O corte de materiais por disco abrasivo é um dos processos que apresentam as melhores características de economia, eficiência e rapidez sendo muito utilizado no meio industrial. Fatores como porcentagens e homogeneidade da mistura dos componentes, tamanho, forma (abrasividade), tenacidade e dureza dos grãos abrasivos, tipos de ligantes e de abrasivos, velocidade de corte e velocidade de mergulho influenciam na segurança, no desempenho e comportamento da operação. Este trabalho apresenta um estudo sobre a influência da dureza dos discos abrasivos no desempenho do processo de corte em operações do tipo remoção a seco. O aumento da dureza dos discos propiciou um aumento da força tangencial de corte e da relação G, devido à mais forte ligação entre o grão e o ligante no compósito. Os resultados mostram que a dureza dos discos abrasivos afeta a economia, pois influencia na vida útil dos discos abrasivos em termos de números de cortes proporcionados; a produtividade, pois está relacionada com o número de trocas de discos desgastados; os esforços necessários para a operação, pois estão relacionados com as forças tangenciais de corte.

Influência da velocidade de avanço do rebolo nos danos de aços endurecidos retificados

A tendência mundial é o aumento da produtividade e da produção de peças cada vez mais sofisticadas, com elevado grau de tolerância geométrica, dimensional, com bom acabamento superficial, com baixo custo. A retificação é responsável pelo acabamento final no processo de usinagem de um material. No entanto, danos gerados nesta fase de produção comprometem todos os recursos utilizados nas fases anteriores. Grande parte dos problemas ocorridos na retificação deve-se à enorme temperatura gerada pelo processo devido às condições de usinagem. Atribui-se à velocidade de avanço, que está diretamente relacionada com a produtividade, os danos ocorridos na retificação, ficando esta variável limitada até valores que não proporcione danos. Neste trabalho, através da variação da velocidade de avanço no processo de retificação cilíndrica externa do aço ABNT D6, racionalizando a aplicação de dois fluidos de corte e usando um rebolo superabrasivo de CBN (nitreto de boro cúbico) com ligante vitrificado, avaliou-se a influência da velocidade de avanço nos danos superficiais de aços endurecidos. Os resultados permitiram concluir que a velocidade de avanço associada a uma eficiente refrigeração e lubrificação, não provocou danos térmicos (queima, trincas, tensões de tração) ao material. Tensões residuais e a rugosidade do material retificado apresentaram uma correlação com as condições de usinagem. O trabalho concluiu ser capaz um aumento dos índices de produtividade sem provocar danos nos componentes retificados.

Influência de defeitos e diferentes processos de fabricação nas propriedades mecânicas finais de cerâmicas

Os materiais cerâmicos são atualmente cada vez utilizados como opção na engenharia mundial. Por se tratar de materiais com alta resistência mecânica, possuem muitas aplicações em diversas áreas, como por exemplo a de mancais, a automotiva (sensores, isoladores, catalisadores, pistões, válvulas, revestimentos), a de implantes biocompatíveis (dentário, substituição óssea, válvulas cardíacas), a de produtos sujeitos ao desgaste (guias), a de refratários (revestimento de equipamento bélico, componentes de fornos), a eletrônica, e outras. Nos processos de fabricação da cerâmica há uma gama de fatores que contribuem para as características do produto final. Devido a isso, muitos pesquisadores têm trabalhado no estudo da influência de determinados defeitos e técnicas de produção de cerâmicas nas características do produto final. Este trabalho tem como objetivo fazer uma revisão bibliográfica de recentes artigos que analisam a influência de fatores como velocidade de queima, surgimento de trincas, porosidade, fases cristalinas, e tamanho de partículas, nas propriedades mecânicas finais das cerâmicas. Pode-se concluir que é possível aperfeiçoar o processo de fabricação da cerâmica a fim de promover as melhores propriedades mecânicas possíveis, conhecendo-se fatores prejudiciais e métodos adequados para se obter o melhor produto final.

Comparação da influência entre tempos de polimerização em resinas compostas polimerizadas com LED e Luz Incandescente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatores de influência na produção de leite bovino sobre os níveis da contagem bacteriana total

The objective of this study was to evaluate the influence of milking procedures on the levels of total bacterial count (TBC) in bovine milk. In the first study the influences of procedures for hygienic milking, cleaning of milking equipment and milk cooling tanks on the TBC levels were evaluated. Four bulk samples of milk were collected from each tank in eight properties for TBC analysis, employing the flow cytometry method. A questionnaire was applied in each property to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology for analysis of longitudinal data was considered, focusing on random effects models. The results showed that the handling procedures for milking and the cleanliness of the cooling tank contributed to a further reduction in the levels of TBC raw milk cooling tanks. The second study aimed to describe the percentage of the properties that comply with the Normative Instruction Nº 51 (Brazil s IN 51) with regard to total bacterial count (TBC) in bovine milk. The study was conducted from January 2010 to July 2011. Milk samples were collected from the eight properties selected for TBC analysis by the flow cytometry method. Again, on each property a questionnaire was applied to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology of marginal models based on Generalized Estimate Equations (GEEs) was followed in the statistical analysis. The results showed that the handling procedures of the milking and the cleanliness of the cooling tanks contributed to a considerable percentage of the properties that reached the limits of TBC established by IN 51

Influência do tipo de chanfro, tecimento e sentido de laminação na distorção angular em soldagem GMAW-P robotizada de alumínio

The industry's interest in having a greater control of the deformations caused by welding is due to the geometric and dimensional tolerances been more and more precise in the project specifications, motivating the manufacturing engineering to develop stable processes and to ensure routine production. Aiming at it, the main goal of this present work is to analyze how much routine situations used in automatic aluminum welding can influence on the angular deformations of this material. Using the alloy AA 5052 H34, and the automatic welding in pulsed GMAW process, three types of weaving were applied throughout the length of the weld, in butt joints assembled without groove and with 60 degrees single-V-groove, arranged transversely as well as longitudinally to the rolling direction of the plate. The measurement of the deformations was made by a three-dimensional equipment, before and after the welding, in three distinct regions in the specimens. The profile of the weld bead was the main factor for the different types of deformations found, as revealed by macrographical analysis. The 60 degrees single-V-groove had higher amplitudes of deformations as the joint without groove. The torch oscillation wasn't a variable of statistically significant influence on this amplitudes.

Análise da influência dos diferentes tempos de polimerização por luz incandescente sobre a resistência ao desgaste abrasivo de resinas compostas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de fatores individuais e sociais sobre as respostas endócrina e comportamental de callithrix jacchus a desafios ambientais físicos e sociais

Regarding the growing number of human beings with physical and mental pathologies associated to different stressor agents, attempts are being made to validate animal models with a close phylogenetic resemblance to man, to study stress response. Callithrix jacchus has been widely used in biomedical research, including on stress, but there is scarce information in the literature about how individual and social factors modulate stressor response in this species. This study uses 4 approaches to investigate the response of male and female adult C. jacchus, under situations of stress, and in the first we show evidence of the importance of this animal as an experimental model in research involving the hypothalamus-pituitary-adrenal axis. And we investigate if sex and baseline cortisol levels modulate the behavioral and hormonal response to separation. In two additional approaches investigate if type of social support (co-specific parent or non-parent) and social rank interfere in behavioral and hormonal when the animal are exposure to a new environment, paired with a co-specific (F2), exposure of the animal to a new environment, isolated (F3) or during reunion (F4). Finally, we also investigated the androgen levels in the males, with a focus on the challenge hypothesis, referring to environmental responsiveness and male-male exposure to relatives and non-relatives of C. jacchus. It was observed that: (1) the baseline cortisol of the animal is predictive of cortisol reactivity at separation; (2) males and females do not show dimorphism in the response of cortisol to stressors, although the females have higher baseline levels of this hormone and exhibit higher frequencies of anxiety-related behaviors; (3) only social support provided by relatives proved to be effective in buffering the cortisol response. In behavioral terms this response was dimorphic, showing that only the male dyads displayed an attenuated response to stress; (4) the males showed differences in cortisol levels as a function of social rank and study phases, whereas in the females no such alterations were observed. The males with indefinite dominance hierarchy (IDH) had reduced cortisol in F2 and F4, while the IDH females showed an increase in F3 and F4; (5) the males of relative and non-relative dyads did not exhibit variations in androgen levels as a function of a new environment. These results, taken together, (a) corroborate the use of C. jacchus as a good animal model for stress-related studies, given that they exhibit similar behavioral and physiological alterations to those of human beings in response to stressor agents; (b) point to the importance of considering individual and social modulating factors during experiments with stressors; (c) provide more reliable comparison parameters in studies where these primates are used as animal models, and (d) show that androgens vary as a function of genetic proximity (relative or non-relative) when the animals are faced with physical and social environmental challenges, thus providing important information for studying the challenge hypothesis in this species

Influência da salinidade e temperatura da água nas respotas comportamental e fisiológica de camarões marinhos Litopenaeus vannamei(BOONE 1931)

The shrimp Litopenaeus vannamei has been grown in highly variable environments, especially in relation to salinity and water temperature. The adjustment to such conditions mainly involves changes in behavior, physiology, particularly in the immune response. This may consequently reduce the welfare of these animals. Despite the widespread farming of the species, little is known about their behavioral and physiological responses under stressful conditions. Thus, the objective of this study was to assess the influence of different salinities and temperatures in the behavior of the marine shrimp L. vannamei, and its relation to the total hemocytes count. In the laboratory, juvenile shrimp were kept in glass aquaria with a closed water recirculation system, continuous aeration and filtration, and under a 12:12 h light/dark cycle. Behavioral observations occurred 1, 4, 7 and 10 h after the start of each phase (light or dark). To assess the influence of salinity, shrimp were first acclimated and then observed at 2, 30 or 50 ppm salinity water, while temperatures tested were 18, 28 and 33 ° C. At the end of each experiment (30 days), shrimp hemolymph was collected for subsequent total hemocytes count (THC), a parameter used to assess stress. In general, feeding behavior was modified under lower salinity and temperature, with reduced values in feeding, exploration and digestive tract filling. Inactivity and burrowing were prevalent under extreme conditions water salinity and temperature, respectively: 2 and 50 ppm and 18 and 33 ° C; crawling was also less frequent under these conditions. In regards to light/dark cycle, shrimp were more active during the dark phase (crawling and swimming), while burrowing was higher during the light phase, regardless of salinity or temperature of the water. Inactivity behavior did not vary according to the light/dark cycle. Moreover, the total hemocytes count (THC) was reduced under 2 and 50 ppm salinity and 18 ° C temperature. Farming of L. vannamei under extremely low or high salinities and low temperatures is harmful. This suggests the species must be cultivated in salinities closer to those of the sea as well as at high temperatures, which seems to be ideal for a management focused on animal welfare, therefore, producing healthier shrimp

Percepção do mercado romântico e influência do contexto nas preferências românticas entre universitários

Men and women express different preferences for ideal romantic partners. These preferences seem to vary with the level of involvement and commitment expected for the relationship and the perceptions people have about themselves. The current work was developed to expand the findings related to this subject, investigating the market perception of romantic relationships and the effect of context on self-assessment and preferences for romantic partners. For this purpose, 753 undergraduate, Brazilian and American, were enrolled between March 2010 and November 2012 and took part in at least one of the four studies that compose this research, performing the assessment of specific stimulus-subject descriptions. Studies one and two addressed Brazilian and American samples to respectively describe female and male expectations on human mating market. It was observed that individuals from both the genders expect positive assortative mating within couples, that each trait is not evaluated independently, and, in addition to biological predispositions, factors as environmental local constrains and cultural values may also affect mating expectations. The contrasts between the samples showed that Americans valued physical-attractiveness and social-status in describing the same-gender subjects and their expected partners, while Brazilians valued social-skills. Another expectation was also identified for both genders: physically attractive women and men of high-status were expected to be paired to each other. Study three addressed males and females expectations regarding which characteristics are most relevant in ensuring desirable partnerships for same-gender individuals. The results showed that men and women can be grouped together by having similar expectations. However, the group mainly composed of men considered status characteristics as the most important attributes, while the groups mostly composed of women indicated that social skills or physical characteristics as the most important in appealing to a desirable partner. Finally, study four investigated the effect of social comparison on self-perception and mate preferences, revealing that individuals were aware of the attributes valued by the opposite-gender and that self-perception was affected by the attributes of other people. In sum, this work evidenced that romantic relationships can be interpreted as a biological market and that the value of the attributes in the romantic mating marketplace are associated with reproductive relevance of the characteristics.

A influência do discurso do professor na motivação e na interação social em sala de aula

Estudos têm mostrado a importância das interações sociais desencadeadas em sala de aula como fundamentais para a aprendizagem dos alunos. Contudo, o professor deve ser capaz de motivar os estudantes para se envolverem mais ativamente com as atividades de ensino propostas. Este artigo apresenta os resultados de uma investigação sobre as interações sociais desenvolvidas no contexto de uma sala de aula do Ensino Médio, que explicou os princípios da conservação da energia mecânica com uma aula experimental de demonstração. O principal objetivo era entender como o discurso do professor pode contribuir para o bom nível de motivação do aluno durante uma aula. As entrevistas com professor e alunos e todo o processo de interação durante as atividades foram gravados, transcritos e analisados . Os resultados ressaltam a importância da abordagem discursiva dos professores para manter o processo de motivação entre os alunos.

Uso de habitat, orçamento temporal e influência da maré da geomorfologia do fundo sobre o comportamento do boto Sotalia guianensis Van Bénéden, 1864 (Cetacea: Delphinidae) no Porto de Maceió - Alagoas, Brasil

The physical and environmental factors presented by each habitat and the rhythm of behavior patterns strongly influence the ecology and behavior of the all living beings. At same time this factors may provide clues about the structure of a population and its ecological balance. The organizational structure, ecology and behavior of a species appraised in a region if we know be in balance when compared to the same type of appraisal made in a degraded area can provide a clear view of how the anthropogenic influences acted on these species and what steps can be taken in order to mitigate the effects and keep the population. The region where this study was conducted is, like most areas of port, subject to intense physical and environmental degradation. With the emerging interest of change in the quality of these environments also by the companies themselves that use the port services, the proposed study aimed to characterize the use of habitat, the distribution of behavioral activities carried out throughout the day and influence of geomorphology of the bed, depth and variation of tide on the expression of the behavior of Sotalia guianensis in the port of Maceio - Alagoas. From this information will be possible establish parameters for comparison with other populations of S. guianensis and establish conservation measures for the population occurring in the port of Maceio - AL, serving also as a basis for conservation actions future performed in other port regions