Influência de polímeros bioadesivos sobre o efeito protetor do flúor no desenvolvimento da erosão dental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise in vitro da proliferação celular e produção de mediadores inflamatórios por células da conjuntiva estimuladas por materiais utilizados na confecção de próteses oculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de compósitos de benzoxazina/fibra de carbono

Pós-graduação em Engenharia Mecânica - FEG

Tratamentos pré-germinativos e substratos na emergência de sementes e qualidade de mudas de pinhão manso (Jatropha curcas L.)

The physic nut can be propagated asexually or sexually. Using cuttings have been earlier yield and more fidelity characteristics of the parent plant. However, there is less initial vegetative growth. The seeds from the plants have increased genetic variability, are more vigorous and begin production later. To get quality changes, the substrate is an important factor. With that the objective was to taste pre-germinated treatments and different substrate on seeds emergence and quality physic nut seedlings. The experimental design was completely randomized, in factorial scheme 6 x 3 (pre-germinated treatments x substrate), 18 treatments and 4 repetition, 8 seeds to each repetition. It was evaluated six pre-germination treatments: T1: witness (without treatments); T2: water immersion for 12 hours; T3: water immersion for 24 hours; T4: mechanical scarification; T5: mechanical scarification + water immersion for 12 hours; T6: mechanical scarification + water immersion for 24 hours, using as substrate: commercial, expanded vermiculite and sand washed. The mechanical scarification was realized opposite the micropyle using sandpaper n. 60. After the pre-germination treatments, the seeds were emergence in plastic cups (200mL) with substrates. We evaluated the characteristics: percentage, beginning and emergence speed index, mean length of plant, diameter of plant stem, SPAD index, fresh and dry shoot and root. The results showed that in seeds of Jatropha do not need pre-germinative treatments; and the use of commercial substrate showed seedling development.

Aspectos físicos e fisiológicos de sementes de Fimbristylis dicothoma relacionados à germinação e dormência

In the seeds of pioneer plants, the application of treatments for breaking dormancy, and selection by colour and size, are strategies for obtaining seeds of less dormancy and better germination performance. The aim of this study was to evaluate the effect of the physical and physiological aspects of seeds of the tall fringe-rush (Fimbristylis dichotoma) on germination and dormancy. To do this, the seeds were submitted to the following treatments in three studies: (i) control, immersion in H2SO4 (98%, 36N) for 1 minute, immersion in KNO3 (1, 2 and 3%) for 15 minutes, seeding on a substrate moistened with KNO3 (0.2%) and exposure for 5 and 10 hours in a forced air circulation oven at 40 and 70 degrees C; (ii) classification of the seeds by colour (light and dark) and application of the following treatments: control, immersion of the seeds in H2SO4 (98%, 36N) for 1 and 2 minutes, immersion in KNO3 (5% and 10%) for 15 and 30 minutes and seeding on a substrate moistened with KNO3 (0.2%); (iii) classification by size (0.60, 0.50 and 0.40 mm) and germination on a substrate moistened with KNO3 (0.2%) or distilled H2O. The seeds were evaluated by germination test, first count and germination speed index. Moistening the substrate with KNO3 (0.2%), and heat treatment at 40 degrees C for 10 hours improve performance in seeds of the tall fringe-rush. Light-coloured seeds do not display dormancy. Medium-sized seeds of the tall fringe-rush show better performance in terms of percentage and speed of germination.

Testes de estresse na avaliação do vigor de sementes de milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização das proteínas caveolinas -1 e -2 na placenta de conceptos bovinos clonados transgênicos

The transgenic application of green fluorescent protein (GFP) as fetal cell marker on cattle cloned placenta could provide an exclusive model for studying the morphologic and immunologic maternal-fetal interactions, providing information about its mapping, distinguishing the fetal from maternal cells. This model will have direct application, mainly because these animals present problems during its development. With this model's support, we intend to verify the substances transport between mother and fetus during endocytosis, through the immunolocalization of protein named caveolae. For these, we used 06 cloned bovine and 30 cattle samples of artificial insemination (AI) with 90 days of pregnancy, which had been their development interrupted by humanitarian slaughter of the recipient and recovery of the pregnant uterus. We collected the placentome and the chorion. A part of the samples was cut and fixed, by immersion, on a solution containing 4% of parafomaldehyde or 10% of formaldehyde on a sodium phosphate buffer (PBS), at 0,1 M pH 7.4, Zamboni solution (4% of paraformaldehyde, 15% of picric acid, on sodium phosphate buffer 0,1 M pH 7.4), metacarn (60% of metanol, 30% of chloroform, and 10% glacial acetic acid), for morphologic and immunohistochemistry verification for caveolinas proteins -1 and -2 (CAV -1 and CAV-2). The caveolins -1 were found in fetal and maternal villi, but its strongest staining was observed in the endometrial stroma. The caveolins -2 had positive staining in trophoblast and chorioallantoic membrane, and specifically in giant trophoblastic binucleated cell. Therefore the results were compared between cloned cattle and from AI or natural mating, for assisting on detection of the reason of many placental alterations, embryonic losses, spontaneous abortion, post-natal mortality and large offspring syndrome on laboratory-manipulated animals. The result suggests that the proteins caveolins -1 and -2 (CAV-1 and CAV-2) are part of the caveolae composition and important structures related to the molecule transfer to the fetus, nourish it through endocytosis and pinocytosis.

Uso de ácido ascórbico e cloreto de cálcio na qualidade de repolho minimamente processado

The objective of this trial was to evaluate the effect of ascorbic acid (AA) and calcium chloride (CaCl2) applied by immersion at temperatures of 20 and 40 degrees C on the physicochemical and sensory characteristics of minimally processed cabbage, stored under refrigeration. Cabbages were processed in an industrial food processing equipment to be cut in slices with thickness of 3 mm. Slices were immersed in sodium hypochlorite (50 ppm) during 5 minutes for sanitization. After, the following treatments were carried out T1= control (immersion in water during 5 minutes at 20 degrees C); T2= immersion in 1% AA solution, during 5 minutes at 20 degrees C; T3= immersion in 2% AA solution, during 5 minutes at 20 degrees C; T4= immersion in 1% CaCl2 solution during 5 minutes at 20 degrees C; T5= immersion in 2% CaCl2 solution during 5 minutes at 20 degrees C, T6= immersion in 1% CaCl2 solution during 5 minutes at 40 degrees C; and T7= immersion in 2% CaCl2 solution during 5 minutes at 40 degrees C; with four replications each one. After application of treatments, cabbage was centrifuged during one minute, wrapped with polyvinyl chloride, 20 mu m, in trays of expanded polystyrene and maintained in refrigerated environment, at 6 +/- 1 degrees C and 85-90% of relative humidity, during eight days. Little increasing was observed in pH and titratable acidity values and reduction in soluble solids during conservation period on all treatments. Treatment with AA did not differ from control for color and general appearance, while treatment with 2% CaCl2 at 20 degrees C maintained the best quality, with less intensity of browning, best general appearance and purchase intent and least strange odor at the end of evaluation period.

Comparison of microbial load in immersion chilling water and poultry carcasses after 8, 16 and 24 working hours

As atividades dos estabelecimentos de abate de frangos são conhecidas por utilizarem grandes volumes de água durante seus processos, principalmente no processo de resfriamento das carcaças de frangos. Parte desse volume utilizado se faz necessário, em cumprimento à legislação que determina que cada tanque do sistema de pré-resfriadores contínuos por imersão deve ser completamente esvaziado, limpo e desinfetado no final de cada período de trabalho (oito horas). O objetivo deste estudo foi comparar a carga microbiana das águas do sistema de resfriamento e das carcaças de frango ao final de oito, dezesseis e vinte e quatro horas de trabalho do abatedouro, para possível redução do número de vezes do completo esvaziamento dos tanques do sistema de resfriamento. Foram avaliadas, por meio de métodos convencionais microbiológicos e físico-químicos, amostras da água de abastecimento (n=69), visando a evitar possível interferência nas contagens das águas do sistema de resfriamento, amostras de carcaças de frango antes (n=345) e após (n=345) sua passagem pelo sistema de resfriamento e amostras de águas do último estágio do sistema de resfriamento de carcaças (n=69). Os resultados obtidos demonstraram que não houve diferença significativa na carga microbiana das amostras entre as três jornadas de trabalho do estabelecimento, sugerindo que a redução é segura, diminuindo assim o volume de águas residuais e seu impacto no meio ambiente, bem como melhorando o uso racional do tempo de processamento.

Germinação de sementes de atemoia (Annona Cherimola Mill. x A. squamosa L.) cv 'Gefner' submetidas a tratamentos com ácido Giberélico (GA3) e ethephon

O objetivo deste trabalho foi estudar os efeitos do ácido giberélico (GA3), do ethephon e da interação de ambos os reguladores vegetais no processo germinativo de sementes de atemoia (Annona cherimola Mill. x A. squamosa L. ), cultivar 'Gefner'. Empregou-se delineamento experimental inteiramente casualizado, em esquema fatorial 5², com os tratamentos constituídos pela combinação de cinco concentrações de GA3 (ácido giberélico) e cinco concentrações de ethephon, resultando em 25 tratamentos, com quatro repetições de 25 sementes por parcela. As concentrações de GA3 empregadas foram: 0; 250; 500; 750 e 1.000 mg L-1 i.a.e de ethephon: 0; 25; 50; 75 e 100 mg L-1 i.a.. Os tratamentos com os reguladores vegetais foram aplicados na semente por imersão das mesmas nas soluções de GA3 e ethephon por período de 36 horas. As sementes foram semeadas em rolo de papel germitest e levadas à câmara de germinação onde permaneceram no escuro, com temperatura alternada entre 20ºC por 8 horas e 30ºC por 16 horas. As variáveis avaliadas foram: percentagem, tempo e índice de velocidade de germinação, percentagem de plântulas normais e percentagem de sementes dormentes. Existe interação da ação dos reguladores vegetais estudados no processo germinativo de sementes de atemoia, o que permite concluir que a percentagem de germinação de sementes de atemoia (Annona cherimola Mill. x A. squamosa L. ) cv 'Gefner' é aumentada com o emprego de 778 mg L-1 de GA3, enquanto a associação entre elevadas concentrações de GA3 e 75 a 100 mg L-1 de ethephon incrementam o índice de velocidade de germinação e a percentagem de plântulas normais.

A iniciação à docência em professores de educação física: os portfólios e as possibilidades de construção da profissão

No Brasil não há uma tradição de programas de iniciação à docência, mas é sabido que tais programas auxiliam na imersão e consolidação do profissional professor, que na fase inicial da carreira, apresenta necessidades específicas. Dessa forma este estudo se propõe a desvelar como um grupo de iniciação à docência (PIBID - área de Educação Física) tem construído o seu percurso no âmbito do ensino, da introdução ao ensino, entendendo esta perspectiva também como um modelo de educação centrado na iniciação. Assim sendo, este trabalho tem como objetivo central compreender a iniciação a docência no âmbito do projeto PIBID de educação física, buscando identificar os elementos que são apontados pelos estudantes como significativos nesse processo de aprendizagem. Especificamente se busca (a) averiguar os elementos que compõem a iniciação a docência dentro dos relatos dos estudantes; (b) identificar os elementos que são apontados pelos estudantes como significativos nesse processo de aprendizagem da docência e (c) analisar o sentido que estes estudantes atribuem para esta experiência na compreensão do ser professor. Opta-se metodologicamente pela pesquisa qualitativa, estudo descritivo, tendo como técnicas a fonte documental e a análise de conteúdo. Os documentos utilizados nesta pesquisa serão Relatórios de Experiência do 1º Semestre, documentos sobre a Contribuição do Projeto Interdisciplinar, Relatos de Experiência como Aluno da Educação Básica dentre outros produzidos por bolsistas do PIBID. Foram encontrados 3 eixos temáticos acerca dos resultados: Tornar-se professor: um processo e uma escolha, Iniciação à docência: Elementos que a compõem, ; PIBID e a aprendizagem da docência: contribuições e limites. Adicionamos ainda as sugestões, limites e críticas emitidas pelos bolsistas sobre o Programa. Realizamos a discussão destes eixos a partir de 5 pontos:...

Desenvolvimento e caracterização de dispositivos eletroluminescentes contendo uma blenda polimérica condutora e Zn2SiO4:Mn

Despite the great development of organic and polymeric electroluminescent materials, the large scale commercial application of devices made with these materials seems conditioned to specific cases, mainly due to the high cost and the low durability, in compared to conventional technologies. In this study was produced electroluminescent devices by a process simple, drop casting. Were produced electroluminescent films containing Zn2SiO4:Mn immersed in a conductive polymer blend with different thicknesses. The morphological characteristics of these films were studied by scanning electronic microscopy. These films were used in the manufacture of electroluminescent devices, in which the light emission properties of the developed material were evaluated. The blend was composed of the conductive polymer Poly(o-methoxyaniline), doped with p-toluene sulfonic acid, and an insulating polymer, Poly(vinylidene fluoride) and its copolymer Poly(vinylidene fluoride-cotrifluoroethylene). To this blend was added Zn2SiO4:Mn, thereby forming the composite. A first set of devices was obtained using composites with different weight fraction of polymeric and inorganic phases, which were deposited by drop casting over ITO substrates. Upper electrodes of aluminum were deposited by thermal evaporation. The resulting device architecture was a sandwich type structure ITO/ composite/ Al. A second set of devices was obtained as self-sustaining films using the best composite composition obtained for the device of the first set. ITO electrodes were deposited by RF-Sputtering, in both faces of these films. The AC electrical characterization of the devices was made with impedance spectroscopy measurements, and the DC electrical characterization was performed using a source/ meter unit Keithley 2410. The devices light emission was measured using a photodiode coupled to a digital electrometer, Keithley 6517A. The devices electrooptical characterization showed that the...

Fabricação e caracterização de diodo Schottky orgânico com arquitetura planar

Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...

Avaliação da capacidade seladora apical de um adesivo dentinário, acrescido ou não de hidróxido de cálcio, comparada à de um cimento endodôntico à base de hidróxido de cálcio, na obturação de canais radiculares

Pós-graduação em Odontologia Restauradora - ICT

Comportamento do esmalte de dentes decíduos após desafio desmineralizante em função de materiais restauradores: estudo ao microscópio de luz polarizada

Pós-graduação em Biopatologia Bucal - ICT