Preferência alimentar de Dione juno juno (CRAMER, 1779) (Lepidoptera: Nymphalidae) por genótipos de maracujazeiro

O presente trabalho teve por objetivo determinar o efeito de genótipos de maracujazeiro quanto à atratividade e à não-preferência para alimentação de lagartas de Dione juno juno, em diferentes idades, através de testes com e sem chance de escolha. Os experimentos foram conduzidos no Departamento de Fitossanidade da FCAV/UNESP de Jaboticabal-SP, sob condições ambientais controladas (T=26=±=1°C=U.=R.= 60 ± 10% e fotofase = 14 horas), utilizando-se dos genótipos Passiflora edulis, P. gibertii, P. alata, Sul Brasil, IAC-275, Flora FB 300, P. serrato-digitata, P. edulis f. flavicarpa, Maguary FB-100 e P. foetida. Para o teste com chance de escolha, foram utilizadas placas de Petri, onde foram distribuídos, de forma eqüidistante, um disco foliar (3,2 cm) de cada genótipo estudado e liberando-se em seguida, no centro da placa, 5 lagartas recém-eclodidas ou uma lagarta com 10 dias de idade por material. No teste sem chance de escolha, foi colocado apenas um disco de cada genótipo por placa de Petri (9 cm de diâmetro), mantendo-se o mesmo padrão de infestação utilizado no teste com chance. As avaliações foram realizadas em duas etapas, sendo que, na primeira, avaliou-se a atratividade, contando o número de lagartas em cada material a 1; 3; 5; 10; 15; 30; 60; 120; 240 minutos e 24 horas após a liberação das mesmas. Na segunda etapa, observou-se o consumo foliar 24 horas após o início do teste. O genótipo menos atrativo às lagartas recém-eclodidas e de 10 dias de idade foi P. alata em testes com e sem chance de escolha. O genótipo P. alata foi o menos consumido em teste com chance de escolha, sendo que, no teste sem chance, P. alata e P. foetida destacaram-se como os menos consumidos para as duas fases larvais.

Cravo-de-defunto como planta atrativa para tripes em cultivo protegido de melão orgânico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Não-preferência para oviposição e alimentação de Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera: Noctuidae) por cultivares de amendoim.

This study aimed to select peanut cultivars resistant to Spodoptera frugiperda, selecting non-oviposition and non-feeding preference in choice and no-choice tests. Peanut cultivars with upright growth habit (IAC 5, IAC 8112, IAC 22 and IAC Tatu ST) and runner growth habit (IAC 503, IAC 505, IAC 147, IAC 125, IAC Caiapo and IAC Runner 886) were evaluated. Tests of non-oviposition preference were conducted with newly emerged adults. Adults were fed a 10% honey solution, remaining in cages for 4 days until the start of the evaluations. The evaluations consisted of quantifying the number of eggs and egg masses, followed by calculating the number of eggs per egg mass. To perform non-feeding preference tests, leaf discs from different peanut cultivars were placed in disposable Petri dishes followed by releasing of a third-instar caterpillar for each cultivar. The attractiveness at 1, 5; 10, 15, 30, 60, 120, 360, 720 and 1,440 minutes was evaluated by counting the caterpillars that were feeding on cultivars. The leaf area consumed was evaluated at the end of the experiment for each cultivar. In the tests of non-oviposition and non-feeding preference, with choice or no-choice, none of the cultivars of the upright growth and runner growth habit influenced the oviposition or food of S. frugiperda. Thus, the peanut cultivars showed no resistance of the non-feeding and non-oviposition types.

Inclusão e deficiência: em busca das representações sociais na mídia impressa em Natal/RN

This thesis is the result of an extensive research on print media discourse on the inclusion of disabled people in society. Articles published in the newspapers Diário de Natal/O Poti and Tribuna do Norte from 1992 to 2002 have been analyzed. Beginning with the very same questions that moved Moscovici (1978) in his classic study La Psychalyse son image et son public , according to which the media play a predominant role in the formation and propagation of social representations as well as in the construction of human behaviors, we have chosen this mass media as our investigation field. Understanding the importance of the communication theory, we intend to associate it to the social representation theory, since communication, as an aspiration, relates to the fundamentals of all humanity (WOLTON, 2004, p. 56). Moreover, means of communication represent an important space for symbolic production and representational process, allowing the analysis of the circulating discourses on social inclusion and disability. Based on these questions, we have determined social representations present in print media on the subject to be our study object. This objective was elected due to the fact that the thematic of disability and inclusion is scarcely and sporadically found in journalistic speech. The research questions have been: which is the representation of disabled people s condition in print media? What changes have occurred during the analyzed period and which was the role played by print media in this process? The research corpus was composed of newspaper articles about various aspects concerning disability and of free word association by reporters. We have analysed: 1) graphical language promoted by the picture of the substances propagated in the period from 1992 a 2002; 2) free word association experiments carried out with reporters of both newspapers; and 3) texts published from 1996 to 1997 using the high-tech program ALCESTE (Contextual Lexical Analysis of a Set of Segments of Texts). The results revealed that the print media in Natal/RN refer to the topic in a discontinuous way, and depend on specific events to highlight disabled people s fight for their rights. Social inclusion is still a great challenge for these people in all levels. We believe that this incapacity to overcome all kinds of obstacles is established in a dialectic relation between society and the media: society remains silent (the manifestation of interest for the cause only attracts some people s or groups attention) and the media, which selects which information is to be broadcasted, gives no evidence to the issue. This representation may be noticed in the infrequency in which articles about the subject are published, as well as in the emphasis to sports, a more important issue for the media. An implication of this study is that a new perspective is opened for analysis and reflection: the Paralympics games as both an inclusive and a segregating social phenomenon. It would be beautiful to have all of us together!

A dimensão social do desenho: um estudo sobre as interações no processo de (re) construção imagética da criança no Ensino Fundamental

In the historical-cultural perspective, the drawing is processed by means of a shared and complex way, under diverse relations with the other and with the immersed signs of the culture. That is, something constituted by the social interactions and that can modify the structure of the psychological functions, therefore as socialized sign, propitiates the incorporation of the functions socially. In this way, the figuration carrier sensitive and established meanings historically disclosing the shared experiences and the ways of the subject to think and perceive the world. Such reflections gave shape to the main problem of this research: how to think over about the drawing at the school to incide in the reconstruction of the childs imaginative language? Under such perspective, this work deals with the interactions in the production process of the drawing of the children in a context of teach-Iearning of the elementary school having as goal to analyze the interactions established in the cIassroom in the process of production of the drawings; to propose situations of learnings that favor the advance graphical expression of the students; and to identify in the interactive games some relations between body expression and drawing. For its accomplishment, it was opted for the construction process based in the collaborative investigation by the fact to propitiate negotiations, sharing and confrontation of ideas, becoming possible a joint construction of the knowledge. For this research, the researcher and the collaborating teacher, as well as the involved children, become themselves into co-authors of the context studied. As locus of the research, it was chosen a first cycle class, with 30 students, from Municipal School Profª. Emília Ramos (Natal/RN - Brazil), whose election took in account the fact of this school to constitute in a promotional space of reflections and professional development of teachers in service and, at the same time, for presentinglimitations theoretic- methodological in the field of teaching for Arts. In the process of the research, it was perceived that the children with the support of the verbal language formulates meanings on the seen and imagined object, printing lines and forms that if overlap to the physiological aspects of the visual perception. That is, the drawing discloses a reality appraised, enriched for the picked up vision of the image, but the meanings established for the author, or observer who becomes it perceivable and identified. In the systemizing situations, it was observed that the teaching-Iearning process of the drawing, implies a co-construction between teachers and learners. And, moreover, the necessity to interlace emotion and cognition by means of plastic-corporal interactions that foment drawing experiences, whose process concurs for the imagenative reconstruct of the apprentices

Diagnóstico Socioambiental da disposição final dos resíduos sólidos no distrito de Guajiru São Gonçalo do Amarante/RN, ressaltando a situação socioeconômica dos catadores

One of the concerns of this century is with the handling and the final destination of urban solid waste (RSU), where depending on the form as they will be made use, they can cause diverse problems, they are of ambient or social order, being able to generate the loss of the quality of life and illnesses to the population, of direct or indirect form. The objective of the present work was to diagnosis the environmental partner situation of the Final Destination of the urban solid residues in the District of Guajiru, city of São Gonçalo do Amarante/RN, standing out the partner-economic situation of the scavengers. The research was carried through in the period of March of 2008 the October of 2009, with a methodology developed through analyzes them of documents made available for the state ambient agency, the Air base of Christmas and managing agencies of the city. For collection of the date, it was used directly application of the questionnaire with 20 existing scavengers in points of destination of residues, evaluation of the old place of final destination through the use of the spread sheet of the IQR (Index of Quality of the Residues), developed for the CETESB, identification of the matter dump and photographic register. For effect of treatment of the data, a descriptive analysis with regard to the answers of the interviewed scavengers was carried through. The acquired date, Scale had been according to tabulated and analyzed in Excel 2003, where they had been generated graphical to observe the behavior of the data. The results show that of the twenty interviewed scavengers, 35% possess age between 20 and 30 years; 75% possess incomplete basic education; 60% inhabit in houses of waal or huts (cardboard or wood); 55% do not make use of system of water supply and system of sanitary exhaustion; with regard to income monthly for scavengers, 35% had presented income between R$ 200,00 and R$300,00 and 20% possess income above of R$ 500,00 for possessing another source of income; 80% of the interviewed ones, use some type of equipment of individual protection; In the year of 2009, confirming what it was informed by the State agency of Environment, during the field visit, we evidence that the city of Is Gonçalo do Amarante, currently, destines its residues in Sanitary landfill of São Region Metropolitan of Natal in the District of Massaranduba in the city of Ceará-Mirim, after some interventions of the State Public prosecution service. However, in the district of Guajiru some diggings still exist that today are used as final destination of RCD' s (Residues of Construction and Demolition) of the cities of Natal and São Gonçalo do Amarante, as well as private dumps that are used by scavengers that deviate the final destination (Sanitary landfill) of the residues of the great generators (supermarkets, shopping Center and hotels), with presence of urubus, generating a new ambient problem for the city and the aeroportuária security. Ahead of this scene, the study it suggests viable alternatives for the elimination of the private dumps and for the social situation of the escavengers, aiming at to improve its quality of life and 10 to minimize the ambient impacts caused by the inadequate destination of the solid waste in the community of Guajiru, São Gonçalo do Amarante/RN, being able to contribute so that the public managers carry through action in the handling and the control of the final destination of the urban solid waste

Desenvolvimento de um ressoador retangular de fenda com múltiplas camadas de substrato e com utilização de material PBG para sistema de comunicação sem fio

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Proposta de um sistema de segurança eletrônica predial

This work presents a suggestion of a security system of land automation having as objective main the creation of a system capable from easy method, supervise the installations of a building with the goal to preserver security personal and patrimonial necessities, aim at portability low cost and use easiness. Was designed an alarms central and access controller that has digital and analogical inputs for sensors and outputs for buzzer, telephonic dialing and electronic lock. The system is supervised by software that makes solicitations of information to the alarms central through the one computer's serial port (RS-232). The supervisory software was developed in platform LabVIEW with displays the received data on a graphical interface informing the sensors' current states distributed in the building and system events as alarns occurrences. This system also can be viewed through the Internet for people registered by the land security's system administrator

SAMVC sistema de autoria de museus virtuais colaborativos

The use of graphical objects three-dimensional (3D) multimedia applications is gaining more space in the media. Networks with high transmission rates, computers with large processing and graphics boost and popularize such three-dimensional applications. The areas of 3D applications ranging from military applications, entertainment applications geared up for education. Within the applications related to education, we highlight the applications that create virtual copies of cultural spaces such as museums. Through this copy, you can virtually visit a museum, see other users, communicate, exchange information on works, etc. Thereby allowing the visit museums physically distant remote users. A major problem of such virtual environments is its update. By dealing with various media (text, images, sounds, and 3D models), its subsequent handling and update on a virtual environment requires staff with specialized knowledge. Speaking of museums, they hardly have people on your team with this profile. Inside the GT-MV (Grupo de Trabalho de Museus Virtuais), funded by RNP (Rede Nacional de Ensino e Pesquisa) propose a portal for registration, amendment and seen collaborative virtual museums of Brazil. The update, be it related to work or physical space, a system with a national scale like this, would be impossible if done only by the project team. Within this scenario, we propose the modeling and implementation of a tool that allows editing of virtual spaces in an easy and intuitive as compared with available tools. Within the context of GT-MV, we apply the SAMVC (Sistema de Autoria de Museus Virtuais Colaborativos) to museums where curators build the museum from a 3D floor plan (2D). The system, from these twodimensional information, recreates the equivalent in three dimensions. With this, through little or no training, team members from each museum may be responsible for updating the system

Desenvolvimento de um simulador de bombeio por cavidades progressivas

The method of artificial lift of progressing cavity pump is very efficient in the production of oils with high viscosity and oils that carry a great amount of sand. This characteristic converted this lift method into the second most useful one in oil fields production. As it grows the number of its applications it also increases the necessity to dominate its work in a way to define it the best operational set point. To contribute to the knowledge of the operational method of artificial lift of progressing cavity pump, this work intends to develop a computational simulator for oil wells equipped with an artificial lift system. The computational simulator of the system will be able to represent its dynamic behavior when submitted to the various operational conditions. The system was divided into five subsystems: induction motor, multiphase flows into production tubing, rod string, progressing cavity pump and annular tubing-casing. The modeling and simulation of each subsystem permitted to evaluate the dynamic characteristics that defined the criteria connections. With the connections of the subsystems it was possible to obtain the dynamic characteristics of the most important arrays belonging to the system, such as: pressure discharge, pressure intake, pumping rate, rod string rotation and torque applied to polish string. The shown results added to a friendly graphical interface converted the PCP simulator in a great potential tool with a didactic characteristic in serving the technical capability for the system operators and also permitting the production engineering to achieve a more detail analysis of the dynamic operational oil wells equipped with the progressing cavity pump

Repelência e deterrência na oviposição de Bemisia tabaci biótipo B pelo uso de extratos vegetais em Cucurbita pepo L

Bemisia tabaci biótipo B é um dos principais insetos-praga na cultura da abobrinha (Cucurbita pepo L.). O manejo dessa mosca-branca tornou-se grande desafio aos agricultores, uma vez que esta apresenta rápida capacidade de desenvolver resistência a diferentes classes de inseticidas. Como alternativa vem sendo investigado o uso de extratos vegetais com atividades inseticida e/ou insetistática, os quais têm revelado resultados promissores no combate a inseto. O presente trabalho teve por objetivo avaliar os possíveis efeitos de sete extratos provenientes de cinco espécies vegetais, Ruta graveolens L. (folhas), Azadirachta indica A. Juss. (folhas + ramos), Trichilia pallida Swartz (ramos), T. pallida (folhas), A. indica (amêndoas), Chenopodium ambrosioides L. (inflorescências + ramos+ folhas) e Mentha pulegium L. (folhas), sobre Bemisia tabaci biótipo B em abobrinha, por meio de testes de repelência e deterrência para oviposição. em teste com chance de escolha, avaliou-se a atratividade e determinou-se o índice de repelência após 6, 24 e 48 horas da aplicação dos extratos. A oviposição foi verificada após a terceira contagem do número de adultos. O extrato à base de folhas de M. pulegium mostrou repelência e deterrência à oviposição de B. tabaci biótipo B, podendo ser recomendado como alternativa para o manejo do inseto.

Interaction between resistant tomato genotypes and plant extracts on Bemisia tabaci (Genn.) biotype B

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

Selectivity of Workers of the Grass-Cutting Ants Atta bisphaerica and Atta capiguara (Hymenoptera: Formicidae) to Vegetable Oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variation in the host preferences and responses of Ascia monuste orseis Godart (Lepidoptera: Pieridae) to cultivars of collard greens Brassica oleracea (L.) var. acephala

This work evaluated the preference of Ascia monuste orseis among 29 cultivars of collard greens through free- and no-choice assays using female adults (attractiveness and oviposition) and third-instar larvae (feeding preference), in both laboratory and greenhouse conditions. In free-choice tests with female adults, the L, V, Y, H, A, and Z cultivars produced oviposition non-preference in butterflies. Cultivars R, P, C, and D produced feeding non-preference in third-instar larvae of A. monuste orseis in free- and no-choice tests. Our findings may be useful for genetic improvement focusing on the development of B. oleracea var. acephala cultivars resistant to A. monuste orseis.