900 resultados para four-dimensional computed tomography
Resumo:
The present study investigates the growth of error in baroclinic waves. It is found that stable or neutral waves are particularly sensitive to errors in the initial condition. Short stable waves are mainly sensitive to phase errors and the ultra long waves to amplitude errors. Analysis simulation experiments have indicated that the amplitudes of the very long waves become usually too small in the free atmosphere, due to the sparse and very irregular distribution of upper air observations. This also applies to the four-dimensional data assimilation experiments, since the amplitudes of the very long waves are usually underpredicted. The numerical experiments reported here show that if the very long waves have these kinds of amplitude errors in the upper troposphere or lower stratosphere the error is rapidly propagated (within a day or two) to the surface and to the lower troposphere.
Resumo:
The currently available model-based global data sets of atmospheric circulation are a by-product of the daily requirement of producing initial conditions for numerical weather prediction (NWP) models. These data sets have been quite useful for studying fundamental dynamical and physical processes, and for describing the nature of the general circulation of the atmosphere. However, due to limitations in the early data assimilation systems and inconsistencies caused by numerous model changes, the available model-based global data sets may not be suitable for studying global climate change. A comprehensive analysis of global observations based on a four-dimensional data assimilation system with a realistic physical model should be undertaken to integrate space and in situ observations to produce internally consistent, homogeneous, multivariate data sets for the earth's climate system. The concept is equally applicable for producing data sets for the atmosphere, the oceans, and the biosphere, and such data sets will be quite useful for studying global climate change.
Resumo:
Students in the architecture, engineering, and construction disciplines are often challenged with visualizing and understanding the complex spatial and temporal relationships involved in designing and constructing three-dimensional (3D) structures. An evolving body of research traces the use of educational computer simulations to enhance student learning experiences through testing real-world scenarios and the development of student decision-making skills. Ongoing research at Pennsylvania State University aims to improve engineering education in construction through interactive construction project learning applications in an immersive virtual reality environment. This paper describes the first- and second-generation development of the Virtual Construction Simulator (VCS), a tool that enables students to simultaneously create and review construction schedules through 3D model interaction. The educational value and utility of VCS was assessed through surveys, focus group interviews, and a student exercise conducted in a construction management class. Results revealed VCS is a valuable and effective four-dimensional (4D) model creation and schedule review application that fosters collaborative work and greater student task focus. This paper concludes with a discussion of the findings and the future development steps of the VCS educational simulation
Resumo:
The optimal utilisation of hyper-spectral satellite observations in numerical weather prediction is often inhibited by incorrectly assuming independent interchannel observation errors. However, in order to represent these observation-error covariance structures, an accurate knowledge of the true variances and correlations is needed. This structure is likely to vary with observation type and assimilation system. The work in this article presents the initial results for the estimation of IASI interchannel observation-error correlations when the data are processed in the Met Office one-dimensional (1D-Var) and four-dimensional (4D-Var) variational assimilation systems. The method used to calculate the observation errors is a post-analysis diagnostic which utilises the background and analysis departures from the two systems. The results show significant differences in the source and structure of the observation errors when processed in the two different assimilation systems, but also highlight some common features. When the observations are processed in 1D-Var, the diagnosed error variances are approximately half the size of the error variances used in the current operational system and are very close in size to the instrument noise, suggesting that this is the main source of error. The errors contain no consistent correlations, with the exception of a handful of spectrally close channels. When the observations are processed in 4D-Var, we again find that the observation errors are being overestimated operationally, but the overestimation is significantly larger for many channels. In contrast to 1D-Var, the diagnosed error variances are often larger than the instrument noise in 4D-Var. It is postulated that horizontal errors of representation, not seen in 1D-Var, are a significant contributor to the overall error here. Finally, observation errors diagnosed from 4D-Var are found to contain strong, consistent correlation structures for channels sensitive to water vapour and surface properties.
Resumo:
OBJECTIVE: To evaluate whether polymorphisms in the peroxisome proliferator-activated receptor-gamma coactivator-1 alpha (PPARGC1A) gene were related to body fat in Asian Indians. METHODS: Three polymorphisms of PPARGC1A gene, the Thr394Thr, Gly482Ser and +A2962G, were genotyped on 82 type 2 diabetic and 82 normal glucose tolerant (NGT) subjects randomly chosen from the Chennai Urban Rural Epidemiology Study using PCR-RFLP, and the nature of the variants were confirmed using direct sequencing. Linkage disequilibrium (LD) was estimated from the estimates of haplotypic frequencies using an expectation-maximization algorithm. Visceral, subcutaneous and total abdominal fat were measured using computed tomography, whereas dual X-ray absorptiometry was used to measure central abdominal and total body fat. RESULTS: None of the three polymorphisms studied were in LD. The genotype (0.59 vs 0.32, P=0.001) and allele (0.30 vs 0.17, P=0.007) frequencies of Thr394Thr polymorphism were significantly higher in type 2 diabetic subjects compared to those in NGT subjects. The odds ratio for diabetes (adjusted for age, sex and body mass index) for the susceptible genotype, XA (GA+AA) of Thr394Thr polymorphism, was 2.53 (95% confidence intervals: 1.30-5.04, P=0.009). Visceral and subcutaneous fat were significantly higher in NGT subjects with XA genotype of the Thr394Thr polymorphism compared to those with GG genotype (visceral fat: XA 148.2+/-46.9 vs GG 106.5+/-51.9 cm(2), P=0.001; subcutaneous fat: XA 271.8+/-167.1 vs GG 181.5+/-78.5 cm(2), P=0.001). Abdominal (XA 4521.9+/-1749.6 vs GG 3445.2+/-1443.4 g, P=0.004), central abdominal (XA 1689.0+/-524.0 vs GG 1228.5+/-438.7 g, P<0.0001) and non-abdominal fat (XA 18763.8+/-8789.4 vs GG 13160.4+/-4255.3 g, P<0.0001) were also significantly higher in the NGT subjects with XA genotype compared to those with GG genotype. The Gly482Ser and +A2962G polymorphisms were not associated with any of the body fat measures. CONCLUSION: Among Asian Indians, the Thr394Thr (G --> A) polymorphism is associated with increased total, visceral and subcutaneous body fat.
Resumo:
OBJECTIVE: The objective of the study was to examine body fat distribution using computed tomography (CT), dual-energy X-ray absorptiometry (DEXA), and anthropometry in relation to type 2 diabetes in urban Asian Indians. RESEARCH DESIGN AND METHODS: This is a case-control study of 82 type 2 diabetic and 82 age- and sex-matched nondiabetic subjects from the Chennai Urban Rural Epidemiology Study, an ongoing epidemiological study in southern India. Visceral, subcutaneous, and total abdominal fat were measured using CT, while DEXA was used to measure central abdominal and total body fat. Anthropometric measures included BMI, waist circumference, sagittal abdominal diameter (SAD), and waist-to-hip ratio. RESULTS: Visceral and central abdominal fat showed a strong correlation with each other (P <0.0001), and kappa analysis revealed a fairly good agreement between tertiles of visceral and central abdominal fat (kappa=0.44, P <0.0001). Diabetic subjects had significantly higher visceral (P=0.005) and central abdominal (P=0.011) fat compared with nondiabetic subjects. Waist circumference and SAD showed a strong correlation with visceral (P <0.01) and central abdominal (P <0.0001) fat in both diabetic and nondiabetic subjects. Logistic regression analysis revealed visceral (odds ratio [OR] 1.011, P=0.004) and central abdominal (OR 1.001, P=0.013) fat to be associated with diabetes, even after adjusting for age and sex. CONCLUSIONS: Visceral and central abdominal fat showed a strong association with type 2 diabetes. Both measures correlated well with each other and with waist circumference and SAD in diabetic and nondiabetic urban Asian Indians.
Resumo:
Purpose – The development of marketing strategies optimally adjusted to export markets has been a vitally important topic for both managers and academics for about five decades. However, there is no agreement in the literature about which elements integrate marketing strategy and which components of domestic strategies should be adapted to export markets. The purpose of this paper is to develop a new scale – STRATADAPT. Design/methodology/approach – Results from a sample of small and medium-sized industrial exporting firms support a four-dimensional scale – product, promotion, price, and distribution strategies – of 30 items. The scale presents evidence of composite reliability as well as discriminant and nomological validity. Findings – Findings reveal that all four dimensions of marketing strategy adaptation are positively associated with the amount of the firm's financial resources allocated to export activity. Practical implications – The STRATADAPT scale may assist managers in developing better international marketing strategies as well as in planning more accurate and efficient marketing programs across markets. Originality/value – This study develops a new scale, the STRATADAPT scale, which is a broad measure of export marketing strategy adaptation.
Resumo:
In addition to CO2, the climate impact of aviation is strongly influenced by non-CO2 emissions, such as nitrogen oxides, influencing ozone and methane, and water vapour, which can lead to the formation of persistent contrails in ice-supersaturated regions. Because these non-CO2 emission effects are characterised by a short lifetime, their climate impact largely depends on emission location and time; that is to say, emissions in certain locations (or times) can lead to a greater climate impact (even on the global average) than the same emission in other locations (or times). Avoiding these climate-sensitive regions might thus be beneficial to climate. Here, we describe a modelling chain for investigating this climate impact mitigation option. This modelling chain forms a multi-step modelling approach, starting with the simulation of the fate of emissions released at a certain location and time (time-region grid points). This is performed with the chemistry–climate model EMAC, extended via the two submodels AIRTRAC (V1.0) and CONTRAIL (V1.0), which describe the contribution of emissions to the composition of the atmosphere and to contrail formation, respectively. The impact of emissions from the large number of time-region grid points is efficiently calculated by applying a Lagrangian scheme. EMAC also includes the calculation of radiative impacts, which are, in a second step, the input to climate metric formulas describing the global climate impact of the emission at each time-region grid point. The result of the modelling chain comprises a four-dimensional data set in space and time, which we call climate cost functions and which describes the global climate impact of an emission at each grid point and each point in time. In a third step, these climate cost functions are used in an air traffic simulator (SAAM) coupled to an emission tool (AEM) to optimise aircraft trajectories for the North Atlantic region. Here, we describe the details of this new modelling approach and show some example results. A number of sensitivity analyses are performed to motivate the settings of individual parameters. A stepwise sanity check of the results of the modelling chain is undertaken to demonstrate the plausibility of the climate cost functions.
Resumo:
Operational forecasting centres are currently developing data assimilation systems for coupled atmosphere-ocean models. Strongly coupled assimilation, in which a single assimilation system is applied to a coupled model, presents significant technical and scientific challenges. Hence weakly coupled assimilation systems are being developed as a first step, in which the coupled model is used to compare the current state estimate with observations, but corrections to the atmosphere and ocean initial conditions are then calculated independently. In this paper we provide a comprehensive description of the different coupled assimilation methodologies in the context of four dimensional variational assimilation (4D-Var) and use an idealised framework to assess the expected benefits of moving towards coupled data assimilation. We implement an incremental 4D-Var system within an idealised single column atmosphere-ocean model. The system has the capability to run both strongly and weakly coupled assimilations as well as uncoupled atmosphere or ocean only assimilations, thus allowing a systematic comparison of the different strategies for treating the coupled data assimilation problem. We present results from a series of identical twin experiments devised to investigate the behaviour and sensitivities of the different approaches. Overall, our study demonstrates the potential benefits that may be expected from coupled data assimilation. When compared to uncoupled initialisation, coupled assimilation is able to produce more balanced initial analysis fields, thus reducing initialisation shock and its impact on the subsequent forecast. Single observation experiments demonstrate how coupled assimilation systems are able to pass information between the atmosphere and ocean and therefore use near-surface data to greater effect. We show that much of this benefit may also be gained from a weakly coupled assimilation system, but that this can be sensitive to the parameters used in the assimilation.
Resumo:
We develop a new measurement scale to assess consumers’ brand likeability in firm-level brands. We present brand likeability as a multidimensional construct. In the context of service experience purchases, we find that increased likeability in brands results in: (1) greater amount of positive association; (2) increased interaction interest; (3) more personified quality; and (4) increased brand contentment. The four-dimensional multiple-item scale demonstrates good psychometric properties, showing strong evidence of reliability as well as convergent, discriminant and nomological validity. Our findings reveal that brand likeability is positively associated with satisfaction and positive word of mouth. The scale extends existing branding research, providing brand managers with a metric so that likeability can be managed strategically. It addresses the need for firms to act more likeably in an interaction-dominated economy. Focusing on likeability acts as a differentiator and encourages likeable brand personality traits. We present theoretical implications and future research directions on the holistic brand likeability concept.
Resumo:
A truly variance-minimizing filter is introduced and its per for mance is demonstrated with the Korteweg– DeV ries (KdV) equation and with a multilayer quasigeostrophic model of the ocean area around South Africa. It is recalled that Kalman-like filters are not variance minimizing for nonlinear model dynamics and that four - dimensional variational data assimilation (4DV AR)-like methods relying on per fect model dynamics have dif- ficulty with providing error estimates. The new method does not have these drawbacks. In fact, it combines advantages from both methods in that it does provide error estimates while automatically having balanced states after analysis, without extra computations. It is based on ensemble or Monte Carlo integrations to simulate the probability density of the model evolution. When obser vations are available, the so-called importance resampling algorithm is applied. From Bayes’ s theorem it follows that each ensemble member receives a new weight dependent on its ‘ ‘distance’ ’ t o the obser vations. Because the weights are strongly var ying, a resampling of the ensemble is necessar y. This resampling is done such that members with high weights are duplicated according to their weights, while low-weight members are largely ignored. In passing, it is noted that data assimilation is not an inverse problem by nature, although it can be for mulated that way . Also, it is shown that the posterior variance can be larger than the prior if the usual Gaussian framework is set aside. However , i n the examples presented here, the entropy of the probability densities is decreasing. The application to the ocean area around South Africa, gover ned by strongly nonlinear dynamics, shows that the method is working satisfactorily . The strong and weak points of the method are discussed and possible improvements are proposed.
Resumo:
Introduction: New reconstructive and less invasive methods have been searched to optimize bone formation and osseointegration of dental implants in maxillary sinus augmentation. Purpose: The aim of the presented ovine split-mouth study was to compare bovine bone mineral (BBM) alone and in combination with mesenchymal stem cells (MSCs) regarding their potential in sinus augmentation. Material and Methods: Bilateral sinus floor augmentations were performed in six adult sheep. BBM and MSCs were placed into the test side and only BBM in the contra-lateral control side of each sheep. Animals were sacrificed after 8 and 16 weeks. Augmentation sites were analyzed by computed tomography, histology, and histomorphometry. Results: The initial volumes of both sides were similar and did not change significantly with time. A tight connection between the particles of BBM and the new bone was observed histologically. Bone formation was significantly (p = 0.027) faster by 49% in the test sides. Conclusion: The combination of BBM and MSCs accelerated new bone formation in this model of maxillary sinus augmentation. This could allow early placement of implants.
Resumo:
The information concerning the molecular events taking place in onlay bone grafts are still incipient. The objective of the present study is to correlate the effects of perforation of resident bone bed on (1) the timing of onlay autogenous graft revascularization; (2) the maintenance of volume/density of the graft (assessed through tomography); and (3) the occurrence of bone remodeling proteins (using immunohistochemistry technique) delivered in the graft. Thirty-six New Zealand White rabbits were subjected to iliac crest onlay bone grafting on both sides of the mandible. The bone bed was drill-perforated on one side aiming at accelerating revascularization, whereas on the other side it was kept intact. After grafts fixation and flaps suture all animals were submitted to tomography on both mandible sites. Six animals were sacrificed, respectively, at 3, 5, 7, 10, 20 and 60 days after surgery. A second tomography was taken just before sacrifice. Histological slides were prepared from each grafted site for both immunohistochemistry analysis [osteopontin, osteocalcin, type I collagen and vascular endothelial growth factor (VEGF) anti-bodies] and histometric analysis. The values on bone volume measured on tomography showed no statistic significance (P >= 0.05) between perforated and intact sites. Grafts placed on perforated beds showed higher bone density values compared with non-perforated ones at 3 days (P <= 0.05). This correlation was inverted at 60 days postoperatively. The findings from VEGF labeling revealed a tendency for earlier revascularization in the perforated group. The early revascularization of bone grafts accelerated the bone remodeling process (osteocalcin, type I collagen and osteopontin) that led to an increased bone deposition at 10 days. The extended osteoblast differentiation process at intermediate stages in the perforated group cooperated for a denser bone at 60 days.
Resumo:
The objective of this cross-sectional study was to assess the nutritional status of children and adolescents with human immunodeficiency virus/acquired immune deficiency syndrome (HIV/AIDS) receiving highly active antiretroviral therapy (HAART). One hundred and eighteen subjects aged 6-19 years attending an outpatient clinic in Sao Paulo city were involved in the study. The following anthropometric measurements were assessed: weight, height, waist circumference and triceps and subscapular skinfold thickness. One (0.9%) adolescent was diagnosed with abdominal obesity based on waist circumference measurement; three (2.5%) adolescents were obese based on subscapular skinfold thickness. According to the body mass index, the population studied was mainly eutrophic. The prevalence of fat redistribution, a characteristic of patients with HIV/AIDS under HAART, was low. We advise the development of further studies to assess the nutritional status of children and adolescents with HIV/AIDS using anthropometric measurements as well as computed tomography to detect fat redistribution.
Resumo:
We present the case of a 54-year-old female with a previous history of lung fibrosis secondary to methotrexate used for rheumatoid arthritis who was referred to cardiology evaluation due to precordial pain. Echocardiography showed biatrial enlargement with an enlarged coronary sinus and tubular image posterior to the heart. On the coronary angiogram, the right coronary artery was enlarged, and a distal fistula was identified. The patient underwent a contrast enhanced cardiac computed tomography which demonstrated an aneurysmatic right coronary artery with a distal fistula to the right atrium and coronary sinus. As the chest pain did not recur and there was a high risk of the intervention to correct coronary fistula, the patient remained on conservative treatment.