Friction factors and rheological properties of orange juice

The rheological behavior of Brazilian orange juice with different water content (0.34-0.73 w/w) was studied at a wide range of temperatures (0.5-62 degrees C) using a concentric cylinder viscometer. The results indicated that the juices behave as pseudoplastic fluids with yield stress, being represented by the Herschel-Bulkley model. The rheological parameters were fitted as functions of both temperature and water content in the tested range. Based on dimensional analysis it was proposed a modified Reynolds number (Re-M), which includes the Herschel-Bulkley parameters. Experimental data of friction factors during heating and cooling processes of orange juice in laminar flow through circular tubes could be well correlated as a function of Re-M. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

The element-free Galerkin method applied to the study of fully developed magnetohydrodynamic duct flows

In this paper, the meshless method is introduced to magnetohydrodynamics. A numerical scheme based on the element-free Galerkin method is used to solve the laminar steady-state two-dimensional fully developed magnetohydrodynamic flow in a rectangular duct. Accurate and convergent solutions are achieved for low to moderately high Hartmann numbers.

Produtividade de pleurotus ostreatus em resíduos da amazônia

The viability of the utilization of wood and agroindustrial residues available in the Amazon region in the formulation of alternative substrates for the cultivation of Pleurotus ostreatus was tested. Thus, two wood residues: marupa sawdust (SIAMP) and pau-de-balsa sawdust (SAPB), and two substrates derived from agroindustrial residues: sugar-cane bagasse (SIACN) and pupunheira stem (SIAPP), were used. These were supplemented with a mixture of rice bran, wheat and corn as protein source, with addition of 2-3% of CaCO(3) for pH correction (6.5). The substrates were placed in polyethylene (HDPE) bags, sterilized at 121 degrees C for 1h and inoculated in a laminar flow chamber. The cultivation was carried out in an axenic way, in a modified atmosphere. The productivity of the substrates was evaluated in relation to the biological efficiency, with the following mean results: 125.60, 99.80%, 94.00 and 64.60% for SIAPP, SIACN, SIAMP and SIAPB, respectively. The high biological efficiency of the substrates and the cultivation process clearly showed the viability of the utilization of the residues, suggesting the commercial cultivation of this mushroom, which may contribute for improving the social and economical conditions and sustainability of the regional biodiversity resources of Amazonia.

Anomalous flow behaviour of bauxite tailings

This paper deals with the anomalous flow behaviour observed in two bauxite tailings pumping systems, with 450 mm and 680 mm outer diameter. In order to enlarge the pipeline lengths in the field, tests were carried out in a laboratory test-loop in order to try to understand the anomalous (intermittent) flow behaviour and to solve the problem. Based on data obtained from these laboratory tests and using a generalized REYNOLDS number it was possible to obtain results that fit the MOODY ROUSE diagram.

Numerical and experimental analysis of natural convection in a cavity with flush mounted heat sources on a side wall

This work considers a problem of interest in several technological applications such as the thermal control of electronic equipment. It is also important to study the heat transfer performance of these components under off-normal conditions, such as during failure of cooling fans. The effect of natural convection on the flow and heat transfer in a cavity with two flush mounted heat sources on the left vertical wall, simulating electronic components, is studied numerically and experimentally. The influence of the power distribution, spacing between the heat sources and cavity aspect ratio have been investigated. An analysis of the average Nusselt number of the two heat sources was performed to investigate the behavior of the heat transfer coefficients. The results obtained numerically and experimentally, after an error analysis, showed a good agreement.

A study of different calcification areas in newly formed bone 8 weeks after insertion of dental implants in rabbit tibias

In orofacial implantology there are many types of implants for the different systems. Among these is the implant surface type, e.g., a screw type, cylindrical and laminar. Furthermore, the implants are different in their dimensions, their metal composition, their surface condition, such as smooth, grit or layered surfaces and in their methods of application. Two different self-tapping implants, one smooth and the other grit-blasted, are screwed into the bone, and another one with a plasma of titanium coating, which is also in a screw form but with greater spaces between the screw threads are compared. The greatest amount of bone deposition in the bone/implant interface was encountered in the latter one, the smooth surfaced implant being in second place. All of these systems can alter the implant healing process and to demonstrate this, we injected bone markers in the rabbits over different periods of time so as to observe the different areas of bone deposition in the tibias where the implants had been inserted. The bone tracers used were Alizarin, Calcein and Xylenol-orange. The amount of deposition was calculated by using the method of surface morphometry.

Atherosclerosis morphology and pathogenesis

Atherosclerosis is a very common and important disease being the most important cause of mortality in Brazil. Indeed, in 1995, 23.3% of deaths, all ages, in our country, were the consequence of atherosclerosis. This percentage grows to 26.3% for S. Paulo and 32.7% for Rio Grande do Sul. Morphologically, there are 3 main types of lesions: fatty streaks, fibrous plaques, and complicated lesions. Fatty streaks are inocuous and occur early in life. In some persons, with age, they change into fibrous plaques that may lead to stenosis. They also may become complicated by erosion, calcification, hemorrhage and thrombosis. Atherosclerosis is initiated by endothelial functional alterations responsible for increase in permeability to macromolecules, adhesion, and migration of monocytes-macrophages and lymphocytes plus recruitment of platelets and smooth-muscle medial cells. Adhesion molecules, cytokines, growth factors, and free radicals are locally synthesized, favoring proliferation of extracellular matrix and progression of the lesion. Experimental, clinical, and epidemiological evidence point to the importance of lipids, mainly cholesterol-rich low-density lipoprotein (LDL), as one of the most important molecules involved in the genesis and progression of atherosclerosis. Patients with a genetic disorder of cholesterol metabolism (familial hyperlipidemia), caused by a decrease in the availability of receptors for LDL, develop severe atherosclerosis early in life. A series of other factors, such as age, diabetes melitus, diet, hypertension, lack of exercise, elevated hemocysteinemia, immunological disorders, and coagulation instability, are related to the progression of atherosclerosis. All of them are capable of altering the endothelium or increasing the offer of LDL. All the above-mentioned factors are systemic; but atherosclerosic lesions are focal, located at preferential sites such as the emergence of colaterals, bifurcations, and curvatures of arteries, all areas in which the laminar flow is disturbed. In these areas shear stress is diminished favoring the prolongation of permanence time of lipid particles, cells, cytokines, growth factors, etc., in the vicinity of the endothelium. Moreover, the endothelium has sensors that act as transducers of mechanical forces in biological responses. Experimental data demonstrate that the number and quality of adhesion molecules, cytokines, and growth factors synthetized, as well as the local production of radicals, and pro and anticoagulation factors may change with shear stress favoring or not the local establishment and progression of atherosclerotic lesions.

Dental implants: Surface modification of cp-Ti using plasma spraying and the deposition of hydroxyapatite

The commercial pure titanium (cp-Ti) is currently being used with great success in dental implants. In this work we investigate how the cp-Ti implants can be improved by modifying the metal surface morphology, on which a synthetic material with properties similar to that of the inorganic part of the bone, is deposited to facilitate the bone/implant bonding. This synthetic material is the hydroxyapatite, HA, a calcium-phosphate ceramic. The surface modification consists in the application of a titanium oxide (TiO2) layer, using the thermal aspersion - plasma spray technique, with posterior deposition of HA, using the biomimetic method. The X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) and Diffuse Reflectance Infrared Fourier Transform (DRIFT) techniques have been used for characterizing phases, microstructures and morphologies of the coatings. The TiO2 deposit shows a mixture of anatase, rutilo and TiO2-x phases, and a porous and laminar morphology, which facilitate the HA deposition. After the thermal treatment, the previously amorphous structured HA coating, shows a porous homogeneous morphology with particle size of about 2-2.5 μm, with crystallinity and composition similar to that of the biological HA.

Tolerância de perdas de solo na bacia do rio Itiquira, Mato Grosso, Brasil

The geographic area of the present study corresponds to the basin of the Itiquira river high course (Figure 1), in the portion that extends from the tributaries of its source, in the east of the plateau Correntes/Itiquira, in the neighbourhoods the city of Alto Garç as, to the scarp of the São Jerônimo mountain range, toward the west of Itiquira, in the state of Mato Grosso, totalizing 5,361 km 2. The area is placed in the eastern part of the Alto Paraguai basin, in the western portion of the Paraná Sedimentary Basin plateau. Through GIS techniques, it was possible to asses total soil losses from the Itiquira river basin, considering the years of 1966, 1985 and 1996, being based on the Universal Soil Loss Equation. Thus, in 1966 the basin lost 201,546.94 ton of soil, with an average loss of 0.37 ton/ha/year. Considering that the total area of the Itiquira river basin is of 536,100 ha, while in 1985 the soil losses had passed to 1,760,833.40 ton, with an increase of approximately 8.5 times. The average of soil losses in 1985 was of 3.28 ton/ha/year. In 1996 the basin lost 1,662,043.24 ton, with a reduction of only 9.4% in relation to 1985 but, in relation the 1966, the increase continued in the order of 8 times. The average losses per hectare in this year was in the order of 3.10 ton/ha/year (Chart 1). The map of potential of the laminar erosion for 1966 (Figure 3), shows to the highest values in small areas, situated in the northeast of the area, in Alto Garças, with values between 10 the 20 ton/ha/year and some spots in sources of the Itiquira and Ariranha rivers, with values between 1 the 5 ton/ha/year. In a general way, however, the area presents low soil loss for laminar erosion in this year, with inferior values to 1 ton/ha/year. The higher class of erosion, over 10 ton/ha/year, occupied 2,947 ha in 1966. In the year of 1985 (Figure 4), the erosive process spread over the entire studied area, and the class of erosion over of 10 ton/ha/year, already started to occupy 78,437 ha, implying an increase of approximately 27 times in 19 years. A strong increment in the erosive process was noticed in the western part of the area, to along the BR-163 road, exactly where great areas of natural vegetation (open pasture) had been transformed in culture and pasture areas. In the north-eastern part of the area it was also noticed an increment in the erosive process in agreement with the increase of culture areas and reduction of the natural areas, but it was not of so intense form as in the western portion of the area. In the year of 1996 (Figure 5), the class of erosion over of 10 ton/ha/year had diminished for a total of 53.499 ha noticing a retraction of the erosive process in the western part of the area, alongside the BR-163 road. On the other hand, it occurred a strong increment in the northern part of the area, in the neighbourhoods of the city of Alto Garças, alongside the BR-364 road and part of the MT-040 road. In a general way, in the outskirts of the city of Itiquira, in the central part of the area, it was verified an increase of the amount of zones with erosion between 0-1 ton/ha/year, passing to the immediately superior class, of 1-3 ton/ha/year; scarce data of hydrosedimentology in the UHE Itiquira (1999), shows good agreement with the values gotten for the EUPS (Chart 2). Based on the hydric classification proposal for FAO (1967) (Chart 3), it is noticed that areas with high degree of erosion (> 50) in the analysed area are very restricted, occupying 493 ha in 1985 and 332 ha in 1996 (Chart 4). In 1996 appeared as isolated spots in the north of Itiquira and Alto Garças, however beyond limits of the Itiquira river basin. These areas require special cares in its use as agricultural areas. Aiming at identifying and indicating the areas of potential risk of erosion and that need implementation of conservation practices, it was elaborated the map of limit of tolerance to the soil losses. In 1966 (Figure 6), areas with soil losses over of the tolerable were restricted to small spots located in the eastern part of the area, occupying 0.43% of the total of the area; already in 1985 (Figure 7), this percentage passed to 5.86%, spreading for all the area; in 1996 (Figure 8) it is observed a fast reduction of the areas with soil losses over of the tolerance limit, passing 5.43% of the total of the area. All the areas with losses over of the tolerable value must be considered as risk areas and were done in these areas studies for implementation of conservation practices.

Thermally developing forced convection of non-Newtonian fluids inside elliptical ducts

Laminar-forced convection inside tubes of various cross-section shapes is of interest in the design of a low Reynolds number heat exchanger apparatus. Heat transfer to thermally developing, hydrodynamically developed forced convection inside tubes of simple geometries such as a circular tube, parallel plate, or annular duct has been well studied in the literature and documented in various books, but for elliptical duct there are not much work done. The main assumptions used in this work are a non-Newtonian fluid, laminar flow, constant physical properties, and negligible axial heat diffusion (high Peclet number). Most of the previous research in elliptical ducts deal mainly with aspects of fully developed laminar flow forced convection, such as velocity profile, maximum velocity, pressure drop, and heat transfer quantities. In this work, we examine heat transfer in a hydrodynamically developed, thermally developing laminar forced convection flow of fluid inside an elliptical tube under a second kind of a boundary condition. To solve the thermally developing problem, we use the generalized integral transform technique (GITT), also known as Sturm-Liouville transform. Actually, such an integral transform is a generalization of the finite Fourier transform, where the sine and cosine functions are replaced by more general sets of orthogonal functions. The axes are algebraically transformed from the Cartesian coordinate system to the elliptical coordinate system in order to avoid the irregular shape of the elliptical duct wall. The GITT is then applied to transform and solve the problem and to obtain the once unknown temperature field. Afterward, it is possible to compute and present the quantities of practical interest, such as the bulk fluid temperature, the local Nusselt number, and the average Nusselt number for various cross-section aspect ratios.

Flow evolution of a metallic slurry during thixoextrusion of an automotive valve

The aim of this work is to characterize a metallic slurry (Al-4.5%Cu) flow during thixoforming of an automotive valve. The necessary globular structure was obtained by first inoculating the alloy with TIBAL (5%Ti, 1%B, Al - rest) at 750.0°C, and then reheating to a state between liquidus and solidus prior to thixoforming. Two metallic slurries, with a solid phase of approximately 86.1 and 78.2 percent, were used to generate different experimental flow patterns during the thixoforming process. The flow of the material into the die was observed for total, and partial displacement (2.7, 5.4, 7.5mm) of the punch. The first displacement shows formation of the valve rod. The patterns at each step of displacement of the punch were preserved by quenching in water, thus revealing the profile of the die fill and microstructural evolution. Degeneration of the globular phase was observed along the piece thixoextruded. Thixoextrusion forces versus time curves were generated for partial and full displacement of the punch. Porosity was visible along the billet prior to thixoforming. However, some areas show that the porosity gradually decreased to zero as the thixoextrusion pressure increased. Turbulent, transient and laminar flow are analyzed in this work.

Simulations of incompressible fluid flows by a least squares finite element method

In this work simulations of incompressible fluid flows have been done by a Least Squares Finite Element Method (LSFEM) using velocity-pressure-vorticity and velocity-pressure-stress formulations, named u-p-ω) and u-p-τ formulations respectively. These formulations are preferred because the resulting equations are partial differential equations of first order, which is convenient for implementation by LSFEM. The main purposes of this work are the numerical computation of laminar, transitional and turbulent fluid flows through the application of large eddy simulation (LES) methodology using the LSFEM. The Navier-Stokes equations in u-p-ω and u-p-τ formulations are filtered and the eddy viscosity model of Smagorinsky is used for modeling the sub-grid-scale stresses. Some benchmark problems are solved for validate the numerical code and the preliminary results are presented and compared with available results from the literature. Copyright © 2005 by ABCM.

Efeitos do parasitismo sobre a estrutura branquial de Leporinus macrocephalus Garavello e Britsk, 1988 (Anastomidae) e Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes:Characidae).

This work described the lesions caused in different species of fish by gill parasites from fee-fishing at Guariba, State of São Paulo. The research was developed from april, 1997 to march to 1999, seeking to verified the kind tissues lesions from fish. Of these, forty and seven were Leporinus macrocephalus and fifty and five Piaractus mesopotamicus. About 87.2% of the L. macrocephalus, and 58.1% of the P. mesopotamicus were sponged by several species of parasites. The parasite most abundant in L. macrocephalus was Piscinoodinium pillulare, while monogenean, Trichodina sp and myxosporidian infected P. mesopotamicus. Severe gill lesions have been observed in L. macrocephalus and P. mesopotamicus caused by monogenean, P. pillulare e Trichodina sp. parasitism, such as intersticial hemorrhage, sub-epithelium edema, inflammation, epitelial hiperplasy in filaments and lamina, proliferation of mucosal cells and laminar fusion.

Micropropagação de babosa (Aloe vera L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Características ultraestruturais do segmento abdominal da aorta de rato albino

The objective of the present research was to investigate the ultrastructural peculiarities of the aortic wall of the rat. Seven young adult rats were used, from which fragments of the infrarenal abdominal aorta were collected. After collection, the vascular segments were fixed and sent for analysis by scanning electron microscope. The elastic lamellae appear interposed with smooth muscular fibers; this pattern was verified mainly at the medial layer structure. Among the mural elements a well defined interrelationship was established through connective lamellae of the arterial wall. The collagen lamellae mainly provided anchoring among the elastic and smooth muscular constituents. The intimal layer showed special ultrastructural features, such as a non-continuous inner elastic lamina presented in certain sites of the vascular wall, followed by endothelial pores. This mural pattern of the abdominal aorta provided support to vascular functions such as shrinkage among the laminar composition of the arterial layers, also acting in mechanical properties of the vascular wall, such as viscoelasticity and contractility - essential actions to blood vessel hemodynamics.