Modelling of an efficient dynamic smart solar photovoltaic power grid system

A smart solar photovoltaic grid system is an advent of innovation coherence of information and communications technology (ICT) with power systems control engineering via the internet [1]. This thesis designs and demonstrates a smart solar photovoltaic grid system that is selfhealing, environmental and consumer friendly, but also with the ability to accommodate other renewable sources of energy generation seamlessly, creating a healthy competitive energy industry and optimising energy assets efficiency. This thesis also presents the modelling of an efficient dynamic smart solar photovoltaic power grid system by exploring the maximum power point tracking efficiency, optimisation of the smart solar photovoltaic array through modelling and simulation to improve the quality of design for the solar photovoltaic module. In contrast, over the past decade quite promising results have been published in literature, most of which have not addressed the basis of the research questions in this thesis. The Levenberg-Marquardt and sparse based algorithms have proven to be very effective tools in helping to improve the quality of design for solar photovoltaic modules, minimising the possible relative errors in this thesis. Guided by theoretical and analytical reviews in literature, this research has carefully chosen the MatLab/Simulink software toolbox for modelling and simulation experiments performed on the static smart solar grid system. The auto-correlation coefficient results obtained from the modelling experiments give an accuracy of 99% with negligible mean square error (MSE), root mean square error (RMSE) and standard deviation. This thesis further explores the design and implementation of a robust real-time online solar photovoltaic monitoring system, establishing a comparative study of two solar photovoltaic tracking systems which provide remote access to the harvested energy data. This research made a landmark innovation in designing and implementing a unique approach for online remote access solar photovoltaic monitoring systems providing updated information of the energy produced by the solar photovoltaic module at the site location. In addressing the challenge of online solar photovoltaic monitoring systems, Darfon online data logger device has been systematically integrated into the design for a comparative study of the two solar photovoltaic tracking systems examined in this thesis. The site location for the comparative study of the solar photovoltaic tracking systems is at the National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. The overall comparative energy output efficiency of the azimuthal-altitude dual-axis over the 450 stationary solar photovoltaic monitoring system as observed at the research location site is about 72% based on the total energy produced, estimated money saved and the amount of CO2 reduction achieved. Similarly, in comparing the total amount of energy produced by the two solar photovoltaic tracking systems, the overall daily generated energy for the month of July shows the effectiveness of the azimuthal-altitude tracking systems over the 450 stationary solar photovoltaic system. It was found that the azimuthal-altitude dual-axis tracking systems were about 68.43% efficient compared to the 450 stationary solar photovoltaic systems. Lastly, the overall comparative hourly energy efficiency of the azimuthal-altitude dual-axis over the 450 stationary solar photovoltaic energy system was found to be 74.2% efficient. Results from this research are quite promising and significant in satisfying the purpose of the research objectives and questions posed in the thesis. The new algorithms introduced in this research and the statistical measures applied to the modelling and simulation of a smart static solar photovoltaic grid system performance outperformed other previous works in reviewed literature. Based on this new implementation design of the online data logging systems for solar photovoltaic monitoring, it is possible for the first time to have online on-site information of the energy produced remotely, fault identification and rectification, maintenance and recovery time deployed as fast as possible. The results presented in this research as Internet of things (IoT) on smart solar grid systems are likely to offer real-life experiences especially both to the existing body of knowledge and the future solar photovoltaic energy industry irrespective of the study site location for the comparative solar photovoltaic tracking systems. While the thesis has contributed to the smart solar photovoltaic grid system, it has also highlighted areas of further research and the need to investigate more on improving the choice and quality design for solar photovoltaic modules. Finally, it has also made recommendations for further research in the minimization of the absolute or relative errors in the quality and design of the smart static solar photovoltaic module.

Sistema colaborativo para monitoramento remoto de equipamentos biomédicos para a videolaparoscopia através do framework web-engineering e o padrão MVC sistema vera-3C

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2015.

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

Health, hygiene and biosecurity: tribal knowledge claims in the UK poultry industry

Since 1997 the world has been facing the threat of a human influenza pandemic that may be caused by an avian virus and the poultry industry around the globe has been grappling with the highly pathogenic strain of avian influenza H5N1, or in more informal terms bird flu. The UK poultry industry has lived with and through this threat and its consequences since 2005. This study investigates knowledge claims about health, hygiene and biosecurity as tools to ward off the threat from this virus. It takes a semi-ethnographic and discourse analytic approach to analyse a small corpus of semi-structured interviews carried out in the wake of one of the most publicised outbreaks of H5N1 in Suffolk in 2007. It reveals that claims about what best to do to protect flocks against the risk of disease are divided along lines imposed on the one hand by the structure of the industry and on the other by more 'tribal' lines drawn by knowledge and belief systems about purity and dirt, health and hygiene.

Collaborative Systems of Systems Need Collaborative Design

Part 1: Introduction

Análise e Prevenção de avarias de um veio de manivelas de um motor Pielstick

Na engenharia mecânica há cada vez mais necessidade de utilizar e de prever o comportamento das máquinas térmicas, mais propriamente dos motores de combustão interna, em especial na área da manutenção e da prevenção de falha num dos componentes vitais de um motor a 4 tempos: o veio de manivelas. Esta situação já tem sido bastante observada na indústria mecânica naval, nomeadamente na Marinha Portuguesa e, devido ao seu elevado grau de importância no desempenho de qualquer motor, decidiu-se focar o trabalho desta tese no estudo dos motores a diesel S.E.M.T Pielstick das unidades navais da Marinha Portuguesa, mais especificamente das corvetas da classe “João Coutinho” e da classe “ Baptista de Andrade”, devido ao historial de ocorrência de falhas no veio de manivelas nesta classe de navios e em outras da Marinha Portuguesa. Para efetuar este estudo, utilizaram-se todos os dados relativos ao historial de ocorrências de falhas destes motores, bem como todos os dados disponíveis do fabricante destes motores, por forma a reproduzir da forma mais fiável possível um modelo tridimensional do veio de manivelas no programa de modelação informática CAD Solidworks®, e possibilitar a análise cinemática do veio de manivelas. Desta forma, foi possível simular as condições de funcionamento do motor, assim como analisar e determinar a causa de falha do veio de manivelas, visando prolongar a vida útil dos veios de manivelas, contribuindo não só para menores custos de manutenção mas também para o aumento da operacionalidade destes navios.

Exploring the relationship between educational mismatch, earnings and job satisfaction in the tourism industry

This article analyses the interrelationship between educational mismatch, wages and job satisfaction in the Spanish tourism sector in the first years of the global economic crisis. It is shown that there is a much higher incidence of over-education among workers in the Spanish tourism sector than in the rest of the economy despite this sector recording lower educational levels. This study estimates two models to analyse the influence of the educational mismatch on wages and job satisfaction for workers in the tourism industry and for the Spanish economy as a whole. The first model shows that in the tourism sector, the wage penalty associated with over-education is approximately 10%. The second reveals that in the tourism sector the levels of satisfaction of over-educated workers are considerably lower than those corresponding to workers well assigned. With respect to the differences between tourism and the overall economy in both aspects, the wage penalty is substantially lower in the case of tourism industries and the effect of over-education on job satisfaction is very similar to that of the economy as a whole in a context where both wages and the private returns to education are considerably lower in the tourism sector.

WATER USE AND SYSTEM RELIABILITY UNDER DIESELGENERATOR AND SOLAR PHOTOVOLTAIC POWERED PUMPING SYSTEMS: A CASE STUDY OF SOLLA TOGO

Access to improved potable water sources is recognized as one of the key factors in improving health and alleviating global poverty. In recently years, substantial investments have been made internationally in potable water infrastructure projects, allowing 2.3 billion people to gain access to potable water from 1990-2012. One such project was planned and installed in Solla, Togo, a rural village in the northern part of the country, from 2010-2012. Ethnographic studies revealed that, while the community has access to potable water, an estimated 45% of the village’s 1500 residents still rely on unprotected sources for drinking and cooking. Additionally, inequality in system use based on income level was revealed, with the higher income groups accessing the system more regularly than lower income groups. Cost, as well as the availability of cheaper sources, was identified as the main deterrent from using the new water distribution system. A new water-pricing scheme is investigated here with the intention of making the system accessible to a greater percentage of the population. Since 2012, a village-level water committee has been responsible for operations and maintenance (O&M), fulfilling the community management model that is recommended by many development theorists in order to create sustainable projects. The water committee received post-construction support, mostly in the form of technical support during system breakdowns, from the Togolese Ministry of Water and Sanitation (MWSVH). While this support has been valuable in maintaining a functional water supply system in Solla, the water committee still has managerial challenges, particularly with billing and fee collection. As a result, the water committee has only received 2% - 25% of the fees owed at each private connection and public tap stand, making their finances vulnerable when future repairs and capital replacements are necessary. A new management structure is proposed by the MWSVH that will pay utilities workers a wage and will hire an accountant in order to improve the local management and increase revenue. This proposal is analyzed under the new water pricing schemes that are presented. Initially, the rural water supply system was powered by a diesel-generator, but in 2013, a solar photo-voltaic power supply was installed. The new system proved a fiscal improvement for the village water committee, since it drastically reduced their annual O&M costs. However, the new system pumps a smaller volume of water on a daily basis and did not meet the community’s water needs during the dry season of 2014. A hydraulic network model was developed to investigate the system’s reliability under diesel-generator (DGPS) and solar photovoltaic (PVPS) power supplies. Additionally, a new system layout is proposed for the PVPS that allows pumping directly into the distribution line, circumventing the high head associated with pumping solely to the storage tank. It was determined that this new layout would allow for a greater volume of water to be provided to the demand points over the course of a day, meeting a greater fraction of the demand than with the current layout.

MODELING AND EXPERIMENTAL SETUP OF AN HCCI ENGINE

For the past three decades the automotive industry is facing two main conflicting challenges to improve fuel economy and meet emissions standards. This has driven the engineers and researchers around the world to develop engines and powertrain which can meet these two daunting challenges. Focusing on the internal combustion engines there are very few options to enhance their performance beyond the current standards without increasing the price considerably. The Homogeneous Charge Compression Ignition (HCCI) engine technology is one of the combustion techniques which has the potential to partially meet the current critical challenges including CAFE standards and stringent EPA emissions standards. HCCI works on very lean mixtures compared to current SI engines, resulting in very low combustion temperatures and ultra-low NOx emissions. These engines when controlled accurately result in ultra-low soot formation. On the other hand HCCI engines face a problem of high unburnt hydrocarbon and carbon monoxide emissions. This technology also faces acute combustion controls problem, which if not dealt properly with yields highly unfavorable operating conditions and exhaust emissions. This thesis contains two main parts. One part deals in developing an HCCI experimental setup and the other focusses on developing a grey box modelling technique to control HCCI exhaust gas emissions. The experimental part gives the complete details on modification made on the stock engine to run in HCCI mode. This part also comprises details and specifications of all the sensors, actuators and other auxiliary parts attached to the conventional SI engine in order to run and monitor the engine in SI mode and future SI-HCCI mode switching studies. In the latter part around 600 data points from two different HCCI setups for two different engines are studied. A grey-box model for emission prediction is developed. The grey box model is trained with the use of 75% data and the remaining data is used for validation purpose. An average of 70% increase in accuracy for predicting engine performance is found while using the grey-box over an empirical (black box) model during this study. The grey-box model provides a solution for the difficulty faced for real time control of an HCCI engine. The grey-box model in this thesis is the first study in literature to develop a control oriented model for predicting HCCI engine emissions for control.

Dynamic mechanical-thermal, microstructural and mechanical analysis of ultra-light polymer-metal composites: influence of forming

A really particular and innovative metal-polymer sandwich material is Hybrix. Hybrix is a product developed and manufactured by Lamera AB, Gothenburg, Sweden. This innovative hybrid material is composed by two relatively thin metal layers if compared to the core thickness. The most used metals are aluminum and stainless steel and are separated by a core of nylon fibres oriented perpendicularly to the metal plates. The core is then completed by adhesive layers applied at the PA66-metal interface that once cured maintain the nylon fibres in position. This special material is very light and formable. Moreover Hybrix, depending on the specific metal which is used, can achieve a good corrosion resistance and it can be cut and punched easily. Hybrix architecture itself provides extremely good bending stiffness, damping properties, insulation capability, etc., which again, of course, change in magnitude depending in the metal alloy which is used, its thickness and core thickness. For these reasons nowadays it shows potential for all the applications which have the above mentioned characteristic as a requirement. Finally Hybrix can be processed with tools used in regular metal sheet industry and can be handled as solid metal sheets. In this master thesis project, pre-formed parts of Hybrix were studied and characterized. Previous work on Hybrix was focused on analyze its market potential and different adhesive to be used in the core. All the tests were carried out on flat unformed specimens. However, in order to have a complete description of this material also the effect of the forming process must be taken into account. Thus the main activities of the present master thesis are the following: Dynamic Mechanical-Thermal Analysis (DMTA) on unformed Hybrix samples of different thickness and on pre-strained Hybrix samples, pure epoxy adhesive samples analysis and finally moisture effects evaluation on Hybrix composite structure.

Emergence and fate of siloxanes in waste streams: Release mechanisms, partitioning and persistence in three environmental compartments

Siloxanes are widely used in personal care and industrial products due to their low surface tension, thermal stability, antimicrobial and hydrophobic properties, among other characteristics. Volatile methyl siloxanes (VMS) have been detected both in landfill gas and biogas from anaerobic digesters at wastewater treatment plants. As a result, they are released to gas phase during waste decomposition and wastewater treatment. During transformation processes of digester or landfill gas to energy, siloxanes are converted to silicon oxides, leaving abrasive deposits on engine components. These deposits cause increased maintenance costs and in some cases complete engine overhauls become necessary. ^ The objectives of this study were to compare the VMS types and levels present in biogas generated in the anaerobic digesters and landfills and evaluate the energetics of siloxane transformations under anaerobic conditions. Siloxane emissions, resulting from disposal of silicone-based materials, are expected to increase by 29% within the next 10 years. Estimated concentrations and the risk factors of exposure to siloxanes were evaluated based on the initial concentrations, partitioning characteristics and persistence. It was determined that D4 has the highest risk factor associated to bioaccumulation in liquid and solid phase, whereas D5 was highest in gas phase. Additionally, as siloxanes are combusted, the particle size range causes them to be potentially hazardous to human health. When inhaled, they may affix onto the alveoli of the lungs and may lead to development of silicosis. Siloxane-based COD-loading was evaluated and determined to be an insignificant factor concerning COD limits in wastewater. ^ Removal of siloxane compounds is recommended prior to land application of biosolids or combustion of biogas. A comparison of estimated costs was made between maintenance practices for removal of siloxane deposits and installation/operation of fixed-bed carbon absorption systems. In the majority of cases, the installation of fixed-bed adsorption systems would not be a feasible option for the sole purpose of siloxane removal. However they may be utilized to remove additional compounds simultaneously.^

Exploring Hidden Coherent Feature Groups and Temporal Semantics for Multimedia Big Data Analysis

Thanks to the advanced technologies and social networks that allow the data to be widely shared among the Internet, there is an explosion of pervasive multimedia data, generating high demands of multimedia services and applications in various areas for people to easily access and manage multimedia data. Towards such demands, multimedia big data analysis has become an emerging hot topic in both industry and academia, which ranges from basic infrastructure, management, search, and mining to security, privacy, and applications. Within the scope of this dissertation, a multimedia big data analysis framework is proposed for semantic information management and retrieval with a focus on rare event detection in videos. The proposed framework is able to explore hidden semantic feature groups in multimedia data and incorporate temporal semantics, especially for video event detection. First, a hierarchical semantic data representation is presented to alleviate the semantic gap issue, and the Hidden Coherent Feature Group (HCFG) analysis method is proposed to capture the correlation between features and separate the original feature set into semantic groups, seamlessly integrating multimedia data in multiple modalities. Next, an Importance Factor based Temporal Multiple Correspondence Analysis (i.e., IF-TMCA) approach is presented for effective event detection. Specifically, the HCFG algorithm is integrated with the Hierarchical Information Gain Analysis (HIGA) method to generate the Importance Factor (IF) for producing the initial detection results. Then, the TMCA algorithm is proposed to efficiently incorporate temporal semantics for re-ranking and improving the final performance. At last, a sampling-based ensemble learning mechanism is applied to further accommodate the imbalanced datasets. In addition to the multimedia semantic representation and class imbalance problems, lack of organization is another critical issue for multimedia big data analysis. In this framework, an affinity propagation-based summarization method is also proposed to transform the unorganized data into a better structure with clean and well-organized information. The whole framework has been thoroughly evaluated across multiple domains, such as soccer goal event detection and disaster information management.

An exploration of students’ perceptions and attitudes towards creativity in engineering education

Thesis (Master, Mechanical and Materials Engineering) -- Queen's University, 2016-09-29 17:45:16.051

Educated to Learn : How to enhance the education of computer science and informatics

The very nature of computer science with its constant changes forces those who wish to follow to adapt and react quickly. Large companies invest in being up to date in order to generate revenue and stay active on the market. Universities, on the other hand, need to imply same practices of staying up to date with industry needs in order to produce industry ready engineers. By interviewing former students, now engineers in the industry, and current university staff this thesis aims to learn if there is space for enhancing the education through different lecturing approaches and/or curriculum adaptation and development. In order to address these concerns a qualitative research has been conducted, focusing on data collection obtained through semi-structured live world interviews. The method used follows the seven stages of research interviewing introduced by Kvale and focuses on collecting and preparing relevant data for analysis. The collected data is transcribed, refined, and further on analyzed in the “Findings and analysis” chapter. The focus of analyzing was answering the three research questions; learning how higher education impacts a Computer Science and Informatics Engineers’ job, how to better undergo the transition from studies to working in the industry and how to develop a curriculum that helps support the previous two. Unaltered quoted extracts are presented and individually analyzed. To paint a better picture a theme-wise analysis is presented summing valuable themes that were repeated throughout the interviewing phase. The findings obtained imply that there are several factors directly influencing the quality of education. From the student side, it mostly concerns expectation and dedication involving studies, and from the university side it is commitment to the curriculum development process. Due to the time and resource limitations this research provides findings conducted on a narrowed scope, although it can serve as a great foundation for further development; possibly as a PhD research.

Empowering engineering students through employability skills

A professional course program like engineering strives to get the maximum number of its students placed through campus interviews. While communication skills have been added in all the engineering courses with the aim to improve their performance in placement, the syllabus mostly concentrates on the development of four language skills. The students are not made aware of the employability skills and their significance. This essay intends to enlist the importance of skills and why students need to be aware of the skills they possess and how they can work on packaging their candidature around a few skills. The discussion starts by addressing the apparent gap between academic programs for engineering students and industry skills requirements. A list of vital employability skills from the standpoint of engineering students follows, with a discussion on how to potentially develop such skills through campus life. The essay stresses the role of academia in filling this gap by acting as facilitators in a three-step process (i.e., awareness, self-analysis, and acquisition). The author concludes that the combination of both employability skills along with an engineering degree should ensure students meet the high expectations of the employers.