979 resultados para dimensión económica


Relevância:

20.00% 20.00%

Publicador:

Resumo:

No presente trabalho que foi realizado na Fazenda Experimental Lageado, da Universidade Estadual Paulista em Botucatu, SP, objetivou-se avaliar os custos envolvidos na produção de silagem de grãos úmidos de milho, tendo como referência o processamento seco deste cereal, ambos cultivados em sistema de plantio direto. Para a avaliação foram determinados os custos envolvidos nas operações de máquinas agrícolas, insumos e na etapa de pós-colheita. Os resultados observados permitiram concluir que o custo por hectare para produção de silagem de grãos úmidos foi de R$1.398,06, sendo 8,8% menor do que os custos para produção de milho seco (R$ 1.533,78).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A aplicação mecanizada de herbicidas em ferrovias tem como principal vantagem a grande capacidade operacional, cobrindo trechos extensos em curtos espaços de tempo. Entretanto em função das características dos equipamentos utilizados, quase sempre ocorre grande desperdício de herbicida. A aplicação manual, através de pulverizadores costais, tem como principal vantagem a possibilidade da pulverização dirigida às áreas infestadas, diminuindo a quantidade de herbicida aplicado. Por outro lado, sua reduzida capacidade operacional faz com que a aplicação de longos trechos seja demorada, tornando-a, assim, mais dependente dos problemas climáticos e operacionais da ferrovia. O objetivo do trabalho foi realizar uma análise comparativa das características operacionais e econômicas destes sistemas de aplicação, apontando os fatores mais importantes a serem avaliados para a sua implantação. Para tanto, foram realizadas simulações em computador, baseando-se em diversas equações matemáticas e dados levantados no campo. Os resultados mostraram que a aplicação manual apresentou-se mais econômica apenas para trechos com baixas infestações (até 10%, e média). Na composição de custos, os gastos com herbicidas corresponderam a cerca de 80% do total para a aplicação mecanizada e apenas 8% na manual. Levando-se em conta os fatores operacionais e de mão-de-obra, em apenas um dos trechos avaliados houve vantagem econômica do uso da aplicação manual.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A remoção de plantas aquáticas tem sido utilizada como opção ao controle químico e biológico, em razão de restrições ambientais em algumas regiões brasileiras. O objetivo deste trabalho foi desenvolver um modelo para análise econômica e operacional da remoção mecânica de plantas aquáticas, visando realizar estudo econômico comparativo com o controle químico. A operação foi estudada num reservatório de uma usina de bombeamento em Barra do Piraí-RJ. O sistema consiste de retroescavadeiras instaladas em balsas, usadas para cortar as plantas e liberá-las no fluxo de água. Antes da tomada d'água existe uma barreira flutuante que intercepta as plantas, as quais são removidas por um guindaste fixo nas margens. As plantas são armazenadas por algum tempo e depois descartadas. Existe, ainda, um sistema de limpeza das grades da tomada d'água. Dados do volume total de plantas descartadas foram coletados durante 14 meses, assim como foi avaliado o volume de biomassa produzido por área das principais espécies infestantes. A empreiteira que administra o serviço forneceu planilhas de custos e outro parâmetros operacionais. Um modelo foi desenvolvido para calcular custos por hectare de plantas removidas. Os resultados mostraram custo médio mensal de US$ 17.780,28 por hectare. Apesar do alto custo, o sistema de remoção demonstrou capacidade de controlar apenas 4,1% da área infestada no reservatório, na época da coleta dos dados. Simulando dados de uma aplicação de glyphosate, o controle químico custaria apenas 0,23% do custo da remoção. Análises de sensibilidade mostraram que a compactação das plantas para transporte, o volume de plantas produzidas por área e o custo do transporte são os parâmetros principais para a otimização.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An solar alternative system for water heating is presented. Is composed for one low cost alternative collector and alternative thermal reservoir for hot water storing. The collector of the system has box confectioned in composite material and use absorption coils formed for PVC tubes. The box of hot water storage was confectioned from a plastic polyethylene drum used for storage of water and garbage, coated for a cylinder confectioned in fiber glass. The principle of functioning of the system is the same of the conventionally. Its regimen of work is the thermosiphon for a volume of 250 liters water. The main characteristic of the system in considered study is its low cost, allowing a bigger socialization of the use of solar energy. It will be demonstrated the viabilities thermal, economic and of materials of the system of considered heating, and its competitiveness in relation to the available collectors commercially. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be shown that such system of alternative heating, that has as main characteristic its low cost, presents viabilities thermal, economic and of materials

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work was carried out in the city of Maringa, located in the Northwest region of Parana, with the aim of analyzing economically the yellow passion fruit crop (Passiflora edulis Sims. f. flavicarpa Deg.), comparing organic and conventional production systems. To estimate technical coefficients, planting and production costs, and profitability indicators of culture, the data were surveyed from technicians of the region and based in experimental work, carried out at the Experimental Farm of lguaterm from the Maringa State University, in the period of june/2002 to july/2004. The total production costs of the culture in two agricultural years reached a value 12.94% higher for the conventional system, and in this same period the medium index of profitability was 21.39% higher for the organic system. The organic production system was economically feasible and provided a larger index of profitability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper presents an analysis of technical and financial feasibility of the use of a solar system for water heating in a fictitious hotel located in the Northeast region. Thereunto it is used techniques of solar collectors´ sizing and methods of financial mathematics, such as Net Present Value (NPV), Internal Rate of Return (IRR) and Payback. It will also be presented a sensitivity analysis to verify which are the factors that impact the viability of the solar heating. Comparative analysis will be used concerning three cities of distinct regions of Brazil: Curitiba, Belém and João Pessoa. The viability of using a solar heating system will be demonstrated to the whole Brazil, especially to the northeast region as it is the most viable for such an application of solar power because of its high levels of solar radiation. Among the cities examined for a future installation of solar heating systems for water heating in the hotel chain, João Pessoa was the one that has proved more viable.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A field experiment was conducted in Sapezal, Mato Grosso state, Brazil, in 2007/2008, with the purpose of determining the effect of potassium sources on yield components, yield, fiber quality and economical aspects of cotton (Gossypium hirsutum L.). A randomized complete block experimental design was used, with five replications. The treatments consisted of application in covering, via soil, at rate of 100 kg ha(-1) of K(2)O, in two split applications, of the sources KCl, K(2)SO(4), KNO(3) and K(2)SO(4).2MgSO(4). The number of nodes, height, number of bolls in the superior third and the weight of boll in the medium third was higher with K(2)SO(4).2MgSO(4) than with KNO(3) source. The potassium fertilizers did not influence the fiber revenue, but the fertilizing with K(2)SO(4).2MgSO(4) source had higher cotton seed yield and lint yield, although the uniformity ratio of fibber and profitability were smaller in relation to K(2)SO(4). The fibber agio index was higher with KNO(3) source. The production cost was higher with K(2)SO(4).2MgSO(4) source and in function of the smallest production cost, KCl source presented superior liquid revenue than other treatments.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Originária da América do Sul, a ferrugem do eucalipto causada pelo fungo Puccinia psidii, vem se tornando uma doença limitante para a cultura do eucalipto no Brasil, exigindo a adoção de estratégias de controle, dentre as quais está o controle químico. Para avaliar eficiência e viabilidade econômica de fungicidas no controle da ferrugem do eucalipto, montou-se um ensaio a campo. Para a instalação do ensaio, utilizou-se o delineamento em blocos ao acaso, em esquema fatorial 3 x 3 (3 produtos e 3 doses), sendo 0,5, 1,0 e 1,5 mL ou g do produto comercial por litro de solução. Os tratamentos foram: 1-) Testemunha; 2-) Fungicida azoxistrobina (estrobilurina); 3-) Fungicida tebuconazol (triazol); 4-) Fungicida tebuconazol + trifloxistrobina (triazol + estrobilurina). O experimento constou de quatro repetições, com avaliação da severidade das plantas. As avaliações foram efetuadas com base no percentual de área foliar lesionada. Verificou-se que com o aumento na dosagem dos fungicidas, houve maior redução da doença nas plantas aos 7 e 15 dias pós-aplicação. O fungicida tebuconazol + trifloxistrobina a 1,5 mL/L foi o mais eficiente contra a ferrugem do eucalipto em condições de campo. O fungicida tebuconazol apresentou maior viabilidade econômica nas três doses testadas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed to technically and economically evaluate the Feller-buncher in different conditions of harvest in eucalypt forests of second cut. The technical analysis included a study of time and movements by the method of continuous time, and operational performance was determined by volume in cubic meters of harvested wood. The economic analysis included the parameters of operational cost, harvest cost and energy consumption. The analysis of the data showed that the composition of main line harvesting and the arrangement of bundles of trees influenced operational performance. The average operational cost was US$ 86.26 per hour of actual work, which resulted in an average cost of forest harvesting of US$ 1.09 m(-3).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to analyze the policy of economic promotion in the Brazilian cities of medium and great size (with population above of 50.000 hab.). The objective of the research is to launch light in the debate on the regional and municipal development, presenting the recent hypotheses supplied by literature. Of complementary form, had for specific objective presents the results of the Research of Basic Information of Cities - PIM, of Brazilian Institute of Geography and Statistics (IBGE), in two surveys carried through together to the Brazilian local governments (1999 and 2009). It analyzes the instruments of economic promotion used by local governments and the influence of the development variables, as the Local Human Index of Development (HID-L) and the Local Gross Domestic Product (GDP-L). The research sample that factors as HID-L and GDP-L has significant influence in economic promotion of cities and must be taken in account in the definition of the local strategies of development

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to analyze the cost of production and economic viability of production of Lambari in Monte Castelo/SP, with the primary market for the live-bait for sport fishing of carnivorous fish. To calculate the operating cost structure was used the model proposed by the Instituto de Economia Agricola from São Paulo/Brazil. In analyzing the economic viability of investment, we determined the Internal Rate of Return (IRR) and Pay Back Period. It was noted that the inputs represented approximately 74.0% of the EOC (Effective Operating Cost). In the rentability analysis (short term), there was an operating profit of R$ 3,133.45 for a cycle, with a profitability of 18.65% for four months of production, a cost price of R$ 13.02 kg(-1). For viability of the activity (long term), the results were attractive to recovery capital from the 3(rd) year (Pay Back), with an IRR of 25.68% and 89.0% return on the producer in 5 years (BCR - benefit cost ratio). The study of costs and economic viability analysis reinforce the importance of rational management in the productive system and the importance of planning and managing the profitability of the activity.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A área da região noroeste do Estado do Paraná, sobre o arenito Caiuá, carece de opções de exploração agrícola economicamente viáveis. Assim, o abacaxi apresenta-se como opção de cultivo, entretanto, necessitando de maiores estudos referentes à sua exploração nesta região. O presente trabalho teve por objetivo avaliar a viabilidade socioeconômica do cultivo desta frutífera na região de Umuarama, Estado do Paraná em relação às principais regiões fornecedoras de abacaxi para o Estado. Para tanto, visitaram-se três propriedades nos municípios de Umuarama, Cafezal do Sul e Cruzeiro do Oeste, objetivando levantar os coeficientes técnicos desta atividade e seus indicadores de lucratividade. A região analisada apresenta boa capacidade competitiva em relação às regiões tradicionalmente produtoras (Frutal, Estado de Minas Gerais e Guaraçaí, Estado de São Paulo), principalmente pela proximidade do mercado consumidor. O abacaxi é uma excelente opção de cultivo no contexto da agricultura familiar.