985 resultados para digital architecture
Resumo:
El presente texto es la actualización y reescritura en español de Els serveis d’informació electrònica: què són i per a què serveixen, obra publicada en 1997 por Edicions de la UB. Aunque sólo han pasado cuatro años desde su publicación, se han tenido que revisar bastantes aspectos, pues el texto se centra en un ámbito en el que se han producido muchos cambios en poco tiempo. A simple vista, una de las modificaciones más perceptibles se refleja en el mismo título de la obra. Si en 1997 adoptamos el término información electrónica para referirnos al sector, actualmente está plenamente consolidada y es más pertinente la denominación información digital. Por otro lado, comparando ambos sumarios se echa en falta, en la nueva edición, la inclusión de algunas formas de distribución que en aquel entonces aún tenían algún peso, como el videotexto —que ya iniciaba, no obstante, su declive imparable hacia la desaparición— u otras, como el audiotexto y el teletexto, que, aunque son sistemas de distribución en uso, se han descartado del presente análisis por su importancia secundaria y por el bajo nivel de interactividad que permiten...
Resumo:
La guía consta de un conjunto de documentos PDF y de una web (http://www.videoaccessible.udl.cat) que se complementan para dar pautas, recomendaciones y ejemplos necesarios para poder mostrar información en formato video digital accesible para las personas con diferentes discapacidades.
Resumo:
Relata os resultados parciais da pesquisa Janelas da Cultura Local: Quissamã, RJ, em desenvolvimento pelo Grupo de Pesquisa Informação e Inclusão Social do Ibict, com apoio do Conselho Nacional de Desenvolvimento Científico e Tecnológico. Registra e oferece à discussão a abordagem teórica e metodológica aplicada ao projeto e, ao mesmo tempo, divulga uma informação sobre a responsabilidade social da ciência da informação, no Brasil. O projeto é implementado em parceria com a Secretaria Municipal de Educação e Cultura de Quissamã, RJ, e tem como campo de pesquisa a Escola Municipal Maria Ilka, no bairro Santa Catarina. Além do relatório científico, que incluirá sugestão de uma metodologia para inclusão digital de comunidades, espera-se como resultado a aquisição de competências em informação pelos participantes locais, e especialmente, contribuir para promover o resgate e o registro da memória cultural do dessa comunidade.
Resumo:
Référence bibliographique : Weigert, n. d.
Resumo:
Référence bibliographique : Weigert, 283
Resumo:
OBJECTIVE: To evaluate the clinical performance of glass-ceramic/zirconia crowns fabricated using intraoral digital impressions - a retrospective study with a three-year follow-up. METHODS: 70 consecutive patients with a total of 86 glass-ceramic/zirconia crowns were treated by a single clinician using standardized clinical and laboratory protocols. A complete digital workflow was adopted for the purpose except for the veneering procedure for the glass-ceramic crowns. Occlusal adjustments were made before the ceramic glazing procedure. Before cementation, all abutments where carefully cleaned with a 70% alcoholic solution and air dried. Cementation was performed using dual-curing, self-adhesive resin cement. Patients were re-examined after 12, 24 and 36 months, to assess crown chipping/fractures. RESULTS: After the three-year follow-up, none of the zirconia-based restoration was lost ("apparent" survival rate 100%) otherwise, the chipping rate of the veneering material increased from 9.3% after 12 months, to 14% after 24 months to 30.2% after 36 months. As a consequence, the "real" success rate after 3 years was 69.8%. CONCLUSIONS: After 3 years the success rate of zirconia-based crowns was 69.8%, while the incidence of the chipping was 30.2%. Assuming an exponential increase in chipping rate between 12 and 36 months it can be argued that, among others, the fatigue-mechanism could be advocated as the main factor for the failure of glass-ceramic veneered zirconia especially after 24 months.
Resumo:
Référence bibliographique : Weigert, 423
Resumo:
Référence bibliographique : Weigert, 424
Resumo:
Référence bibliographique : Weigert, 428
Resumo:
Bibliografia internacional anotada sobre as principais fontes de informação lançadas a partir de 2000, relacionadas à biblioteca digital. Os tópicos cobertos são as bibliografias mais recentes, os livros e manuais, os periódicos especializados, os eventos específicos, as listas de discussão, os grupos e centros de pesquisa, os cursos e treinamentos e as principais organizações.
Resumo:
Référence bibliographique : Weigert, 429
Resumo:
The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.
Resumo:
Référence bibliographique : Weigert, 478
Resumo:
Référence bibliographique : Weigert, 505
Resumo:
Paspalum vaginatum Schwartz plants were grown under greenhouse conditions in a continuous-flow hydroponic culture, containing NO3- or NH4+or NH4NO3 as nitrogen source. After 30 days, the size of aerial biomass and root system decreased significantly when plants were supplied with NH4+as exclusive nitrogen source. Compared to NO3- treatment, reducing and non-reducing sugars were decreasing together with a significant increase in amino acids content. NH4+-nutrition caused tillers to grow toward an orthogravitropic position (average angle of 68° with respect to the horizontal), and with NO3--nutrition, tillers tended to become diagravitropic (average angle of 23°). With NH4NO3 all the parameters measured had values in between those of the other two sources. Thus, the morphologic differences among plants growing in NO3- or NH4+ nutrition confirm the hypothesis that nitrogen source determines the growth habit of tillers in P. vaginatum by modulating the endogenous levels of reducing-non-reducing sugars.