Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation

Using molecular dynamics (MD) simulation, this paper investigates anisotropic cutting behaviour of single crystal silicon in vacuum under a wide range of substrate temperatures (300 K, 500 K, 750 K, 850 K, 1173 K and 1500 K). Specific cutting energy, force ratio, stress in the cutting zone and cutting temperature were the indicators used to quantify the differences in the cutting behaviour of silicon. A key observation was that the specific cutting energy required to cut the (111) surface of silicon and the von Mises stress to yield the silicon reduces by 25% and 32%, respectively, at 1173 K compared to what is required at 300 K. The room temperature cutting anisotropy in the von Mises stress and the room temperature cutting anisotropy in the specific cutting energy (work done by the tool in removing unit volume of material) were obtained as 12% and 16% respectively. It was observed that this changes to 20% and 40%, respectively, when cutting was performed at 1500 K, signifying a very strong correlation between the anisotropy observed during cutting and the machining temperature. Furthermore, using the atomic strain criterion, the width of primary shear zone was found to vary with the orientation of workpiece surface and temperature i.e. it remains narrower while cutting the (111) surface of silicon or at higher machining temperatures. A major anecdote of the study based on the potential function employed in the study is that, irrespective of the cutting plane or the cutting temperature, the state of the cutting edge of the diamond tool did not show direct diamond to graphitic phase transformation.

Fluid balance, intradialytic hypotension, and outcomes in critically ill patients undergoing renal replacement therapy: a cohort study

Introduction: In this cohort study, we explored the relationship between fluid balance, intradialytic hypotension and outcomes in critically ill patients with acute kidney injury (AKI) who received renal replacement therapy (RRT).

Methods: We analysed prospectively collected registry data on patients older than 16 years who received RRT for at least two days in an intensive care unit at two university-affiliated hospitals. We used multivariable logistic regression to determine the relationship between mean daily fluid balance and intradialytic hypotension, both over seven days following RRT initiation, and the outcomes of hospital mortality and RRT dependence in survivors.

Results: In total, 492 patients were included (299 male (60.8%), mean (standard deviation (SD)) age 62.9 (16.3) years); 251 (51.0%) died in hospital. Independent risk factors for mortality were mean daily fluid balance (odds ratio (OR) 1.36 per 1000 mL positive (95% confidence interval (CI) 1.18 to 1.57), intradialytic hypotension (OR 1.14 per 10% increase in days with intradialytic hypotension (95% CI 1.06 to 1.23)), age (OR 1.15 per five-year increase (95% CI 1.07 to 1.25)), maximum sequential organ failure assessment score on days 1 to 7 (OR 1.21 (95% CI 1.13 to 1.29)), and Charlson comorbidity index (OR 1.28 (95% CI 1.14 to 1.44)); higher baseline creatinine (OR 0.98 per 10 mu mol/L (95% CI 0.97 to 0.996)) was associated with lower risk of death. Of 241 hospital survivors, 61 (25.3%) were RRT dependent at discharge. The only independent risk factor for RRT dependence was pre-existing heart failure (OR 3.13 (95% CI 1.46 to 6.74)). Neither mean daily fluid balance nor intradialytic hypotension was associated with RRT dependence in survivors. Associations between these exposures and mortality were similar in sensitivity analyses accounting for immortal time bias and dichotomising mean daily fluid balance as positive or negative. In the subgroup of patients with data on pre-RRT fluid balance, fluid overload at RRT initiation did not modify the association of mean daily fluid balance with mortality.

Conclusions: In this cohort of patients with AKI requiring RRT, a more positive mean daily fluid balance and intradialytic hypotension were associated with hospital mortality but not with RRT dependence at hospital discharge in survivors.

Investigation of chip formation and fracture toughness in orthogonal cutting of UD-CFRP

Features of chip formation can inform the mechanism of a machining process. In this paper, a series of orthogonal cutting experiments were carried out on unidirectional carbon fiber reinforced polymer (UD-CFRP) under cutting speed of 0.5 m/min. The specially designed orthogonal cutting tools and high-speed camera were used in this paper. Two main factors are found to influence the chip morphology, namely the depth of cut (DOC) and the fiber orientation (angle 휃), and the latter of which plays a more dominant role. Based on the investigation of chip formation, a new approach is proposed for predicting fracture toughness of the newly machined surface and the total energy consumption during CFRP orthogonal cutting is introduced as a function of the surface energy of machined surface, the energy consumed to overcome friction, and the energy for chip fracture. The results show that the proportion of energy spent on tool-chip friction is the greatest, and the proportions of energy spent on creating new surface decrease with the increasing of fiber angle.

Evaluation of La1−xSrxMnO3 (0 ≤ x < 0.4) synthesised via a modified sol–gel method as mediators for magnetic fluid hyperthermia

A range of lanthanum strontium manganates (La1−xSrxMnO3–LSMO) where 0 ≤ x < 0.4 were prepared using a modified peroxide sol–gel synthesis method. The magnetic nanoparticle (MNP) clusters obtained for each of the materials were characterised using scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and infra-red (IR) spectroscopy in order to confirm the crystalline phases, crystallite size and cluster morphology. The magnetic properties of the materials were assessed using the Superconducting quantum interference device (SQUID) to evaluate the magnetic susceptibility, Curie temperature (Tc) and static hysteretic losses. Induction heating experiments also provided an insight into the magnetocaloric effect for each material. The specific absorption rate (SAR) of the materials was evaluated experimentally and via numerical simulations. The magnetic properties and heating data were linked with the crystalline structure to make predictions with respect to the best LSMO composition for mild hyperthermia (41 °C ≤ T ≤ 46 °C). La0.65Sr0.35MnO3, with crystallite diameter of 82.4 nm, (agglomerate size of ∼10 μm), Tc of 89 °C and SAR of 56 W gMn−1 at a concentration 10 mg mL−1 gave the optimal induction heating results (Tmax of 46.7 °C) and was therefore deemed as most suitable for the purposes of mild hyperthermia, vide infra.

Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting

Molecular dynamics (MD) simulation was carried out to acquire an in-depth understanding of the flow behaviour of single crystal silicon during nanometric cutting on three principal crystallographic planes and at different cutting temperatures. The key findings were that (i) the substrate material underneath the cutting tool was observed for the first time to experience a rotational flow akin to fluids at all the tested temperatures up to 1200 K. (ii) The degree of flow in terms of vorticity was found higher on the (1 1 1) crystal plane signifying better machinability on this orientation in accord with the current pool of knowledge (iii) an increase in the machining temperature reduces the springback effect and thereby the elastic recovery and (iv) the cutting orientation and the cutting temperature showed significant dependence on the location of the stagnation region in the cutting zone of the substrate.

Time-lapse monitoring of fluid induced geophysical property variations within an unstable earthwork using P-wave refraction

A significant portion of the UK’s transportation system relies on a network of geotechnical earthworks (cuttings and embankments) that were constructed more than 100 years ago, whose stability is affected by the change in precipitation patterns experienced over the past few decades. The vulnerability of these structures requires a reliable, cost- and time-effective monitoring of their geomechanical condition. We have assessed the potential application of P-wave refraction for tracking the seasonal variations of seismic properties within an aged clay-filled railway embankment, located in southwest England. Seismic data were acquired repeatedly along the crest of the earthwork at regular time intervals, for a total period of 16 months. P-wave first-break times were picked from all available recorded traces, to obtain a set of hodocrones referenced to the same spatial locations, for various dates along the surveyed period of time. Traveltimes extracted from each acquisition were then compared to track the pattern of their temporal variability. The relevance of such variations over time was compared with the data experimental uncertainty. The multiple set of hodocrones was subsequently inverted using a tomographic approach, to retrieve a time-lapse model of VPVP for the embankment structure. To directly compare the reconstructed VPVP sections, identical initial models and spatial regularization were used for the inversion of all available data sets. A consistent temporal trend for P-wave traveltimes, and consequently for the reconstructed VPVP models, was identified. This pattern could be related to the seasonal distribution of precipitation and soil-water content measured on site.

Caseinolytic activity in gingival crevicular fluid from periodontitis patients

Introduction: Protease activity is essential for the progression of periodontal disease and several studies have shown that gingival crevicular fluid (GCF) proteases are associated with the attachment loss and bone destruction associated with periodontial disease. In addition to measuring protease levels using ELISA, it is also important to consider enzyme activity which can be measured using appropriate substrates. Aim: The aim of this work was to measure the proteolyitc activity in gingival crevicular fluid (GCF) from periodontitis patients using zymography and a fluorogenic protease substrate. Materials and Methods: Twenty four GCF samples were collected from patients with established periodontitis who had not received any periodontal treatment in the previous six months. A strip of perio-paper was inserted into the gingival crevice until light resistance was felt. After 30 seconds the perio-paper was removed and placed into 500 ul ice cold 0.01M sodium phosphate buffer, pH 7.2, containing 0.15M sodium chloride, vortex mixed for 30 seconds and stored at -80°C until required. GCF samples (10 ul) were electrophoresed on 4-16% Blue casein zymogram gels at 125V constant voltage for 90 min. Following electrophoresis the gel was washed in renaturation buffer for 30 min and then placed in developing buffer overnight. Areas of protease activity appeared as clear bands against a blue background. The total caseinolytic activity of each GCF sample was measured using a fluorescent assay with resorufin-labelled casein as the substrate. Results: The results showed that both casein zymography and fluorogenic assay methods were suitable for analysing caseinolytic activity in GCF samples from periodontitis patients. Caseinolytic activity was variable in the periodontitis samples studied and may reflect the episodic nature of the disease. Conclusion: Casein zymography and fluorogenic assay methods may be useful in future attempts to measure active episodes of periodontal disease.

LL-37 quantification in gingival crevicular fluid (GCF) from periodontitis patients

Background: LL-37, an anti-microbial peptide belonging to the cathelicidin family, derives its name from two N-terminal leucine residues and the 37 amino acids comprising the peptide. LL-37 is the only known cathelicidin to exist in humans. It exhibits both anti-bacterial and immunomodulatory properties. Objectives: In the current study, LL-37 was quantified in GCF from periodontitis patients. Previous studies have relied on qualitative results from Western blotting to detect LL-37 in GCF. This study aims to quantitatively determine LL-37 levels in GCF. Methods: GCF and bacterial plaque samples, pre- and post non-surgical periodontal treatment, were collected from 4 sites in 12 patients presenting with advanced periodontitis. Plaque samples were analysed by QPCR for the presence or absence of the periodontopathic bacterium Porphyromonas gingivalis (P. gingivalis). The concentrations of LL-37 in patient samples pre- and post-treatment were deduced by indirect enzyme linked immunosorbent assay (ELISA). Results: Concentrations of LL-37 in samples varied between a minimum and maximum of 1 and 40 ng/ml. LL-37 levels were shown, pre-treatment, to be higher in deep pockets (6-9 mm) compared with shallower pockets (3-5 mm) and highest in those sites which were positive for P. gingivalis. Non-surgical therapy resulted in a significant improvement in clinical indices while expression levels of P. gingivalis were reduced. Following treatment, LL-37 levels in GCF decreased from an average of 6.5 ± 1 - 5.8 ± 1.2 ng/ml. The most interesting observation however was the reduction in LL-37 levels, from an average of 7 ± 1.3 – 2.5 ± 1.1 ng/ml in those sites where P. gingivalis infection was eradicated post-treatment. Conclusions: LL-37 levels are increased at sites showing advanced periodontal disease, reduce following treatment and appear to be linked to the presence of P. gingivalis. This study will further our knowledge of host defence in chronic diseases such as periodontitis.

Multiple Markers of Inflammation in Crevicular Fluid During Experimental Gingivitis

Objective: To evaluate temporal changes in GCF levels of substance P, cathepsin G, interleukin 1 beta (IL-1&beta), neutrophil elastase and alpha1-antitrypsin (&alpha1AT) during development of and recovery from experimental gingivitis. Methods: Healthy human volunteers participated in a split-mouth study: experimental gingivitis was induced using a soft vinyl splint to cover test teeth during brushing over 21 days, after which normal brushing was resumed. Modified gingival index (MGI), gingival bleeding index (BI) and modified Quigley and Hein plaque index (PI) were assessed and 30-second GCF samples taken from 4 paired test and contra-lateral control sites in each subject at days 0, 7, 14, 21, 28 and 42. GCF volume was measured and site-specific quantification of one analyte per GCF sample was performed using radioimmunoassay (substance P), enzyme assay (cathepsin G) or ELISA (IL-1&beta, elastase, &alpha1AT). Site-specific data were analysed using analysis of repeated measurements and paired sample tests. Results: 56 subjects completed the study. All measurements at baseline (day 0) and at control sites throughout the study were low. Clinical indices and GCF volumes at the test sites increased from day 0, peaking at day 21 (difference between test and control for PI, BI, MGI and GCF all p<0.0001) and decreased again to control levels by day 28. Levels of four inflammatory markers showed a similar pattern, with significant differences between test and control apparent at 7 days (substance P p=0.0015; cathepsin G p=0.029; IL-1&beta p=0.026; elastase p=0.0129) and peaking at day 21 (substance P p=0.0023; cathepsin G, IL-1&beta and elastase all p<0.0001). Levels of &alpha1AT showed no apparent pattern over the course of the study. Conclusion: GCF levels of substance P, cathepsin G, IL-1&beta and neutrophil elastase have the potential to act as early markers of experimentally-induced gingival inflammation.

The impact of hydrogeology on the instability of a road cutting through a drumlin in the North of Ireland

This paper describes the hydrogeological processes which caused unexpected instability and quick conditions during the excavation of a 25m deep cutting through a drumlin in County Down, Northern Ireland. A conceptual hydrogeological model of the cutting, based on pore pressures monitored during and after the excavation demonstrates how quick conditions at the toe of the cutting caused liquefaction of the till. Stability of the cutting was re-established by draining the highly permeable, weathered Greywacke which underlies the drumlin, through the use of a deep toe drain. In spite of this drainage, the cutting was only marginally stable due to the presence of a low permeability zone in the till above the bedrock which limits the reduction of elevated pore pressures within the upper to mid-depths of the drumlin. The factor of safety has been further improved by the addition of vertical relief drains at the crest and berm of the cutting to relieve the pore-pressures within the upper till by intercepting the weathered bedrock. The paper also highlights the importance of carrying out an adequate site investigation compliant with Eurocode 7 and additional monitoring in excavations in stiff, low permeability till.

Fluid strategies and outcomes in patients with acute respiratory distress syndrome, systemic inflammatory response syndrome and sepsis: a protocol for a systematic review and meta-analysis

Background
Fluid administration to critically ill patients remains the subject of considerable controversy. While intravenous fluid given for resuscitation may be life-saving, a positive fluid balance over time is associated with worse outcomes in critical illness. The aim of this systematic review is to summarise the existing evidence regarding the relationship between fluid administration or balance and clinically important patient outcomes in critical illness.

Methods
We will search Medline, EMBASE, the Cochrane Central Register of Controlled Trials from 1980 to the present and key conference proceedings from 2009 to the present. We will include studies of critically ill adults and children with acute respiratory distress syndrome (ARDS), sepsis and systemic inflammatory response syndrome (SIRS). We will include randomised controlled trials comparing two or more fluid regimens of different volumes of fluid and observational studies reporting the relationship between volume of fluid administered or fluid balance and outcomes including mortality, lengths of intensive care unit and hospital stay and organ dysfunction. Two independent reviewers will assess articles for eligibility, data extraction and quality appraisal. We will conduct a narrative and/or meta-analysis as appropriate.

Discussion
While fluid management has been extensively studied and discussed in the critical care literature, no systematic review has attempted to summarise the evidence for post-resuscitation fluid strategies in critical illness. Results of the proposed systematic review will inform practice and the design of future clinical trials.

Systematic review registration
PROSPERO CRD42013005608. (http://​www.​crd.​york.​ac.​uk/​PROSPERO/​)