The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

Objective: the aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials. Method and Materials: One hundred eighty stainless-steel master dies were prepared simulating full crown preparations: 60 in chamfer (CH), 60 in 135-degree shoulder (OB), and 60 in rounded shoulder (OR). The finish lines were machined at approximate dimensions of a molar tooth preparation (height: 5.5 mm; cervical diameter: 8 mm; occlusal diameter: 6.4 mm; taper degree: 6; and cervical finish line width: 0.8 mm). One hundred eighty corresponding copings with the same finish lines were fabricated. A 30-mu m internal relief was machined 0.5 mm above the cervical finish line in 90 of these copings. The fit of the die and the coping was measured from all specimens (L0) prior to cementation using an optical microscope. After manipulation of the 3 types of cements (zinc phosphate, glass-ionomer, and resin cement), the coping was luted on the corresponding standard master die under 5-kgf loading for 4 minutes. Vertical discrepancy was again measured (L1), and the difference between L1 and L0 indicated the cervical adaptation. Results: Significant influence of the finish line, cement type, and internal relief was observed on the cervical adaptation (P < .001). The CH type of cervical finish line resulted in the best cervical adaptation of the metal crowns regardless of the cement type either with or without internal relief (36.6 +/- 3 to 100.8 +/- 4 mu m) (3-way analysis of variance and Tukey's test, alpha = .05). The use of glass-ionomer cement resulted in the least cervical discrepancy (36.6 +/- 3 to 115 +/- 4 mu m) than those of other cements (45.2 +/- 4 to 130.3 +/- 2 mu m) in all conditions. Conclusion: the best cervical adaptation was achieved with the chamfer type of finish line. The internal relief improved the marginal adaptation significantly, and the glass-ionomer cement led to the best cervical adaptation, followed by zinc phosphate and resin cement.

Effect of grazing system on fetal development in Nellore cattle

Intensive grazing systems for beef females, based on abundant availability of high quality forages and supplementary concentrates, may affect fetal development. The objective of this study was to determine the effect of grazing system on length of gestation, fetal development, and characteristics of the calf at birth. Twenty-four pregnant (bred to Nellore bulls) Nellore females were allocated into two groups. The control group (G1) grazed Brachiaria decumbens (signal grass) in a traditional (extensive) grazing system and the second group (G2) were managed on Panicum maximumcv. Tanzania 1 (Tanzania grass) in an intensive grazing system. Fetal development was evaluated by ultrasonography on days 31, 45, 59, 94, 122, 220, and 255 of gestation. The diameter of the amniotic and allantoic cavities, crown-rump length, circumference, and diameter of the head and ocular orbit were determined. At birth, calves were weighed and height, length, thoracic circumference, and ocular orbit and bi-parietal diameters were measured. There were no differences (P > 0.05) in fetal development. The G1 cows had a longer gestation period (4.5 days; P < 0.05) and their calves had greater (P < 0.05) weight, height, length, and thoracic circumference at birth. In conclusion, Nellore females raised under intensive pasture management conditions, had significantly shorter gestation and smaller calves at birth than those raised under extensive pasture management conditions. Therefore, adoption of new management practices (e.g. intensive pasture management), should take into consideration animal behavior and productivity. (C) 2003 Elsevier B.V. All rights reserved.

The effectiveness of alumina powder on carious dentin removal

This study determined the size of aluminum oxide particles used in an air abrasion system that is able to remove carious dentin tissue with maximum preservation of sound structure. Thirty extracted and carious-free third molars were used in this study. The dentin sample was obtained by sectioning the middle of the crown longitudinal to the long axis of the tooth in a mesio-distal direction. One half of the crown corresponded to the sound dentin group (SD), while the other half was used to develop artificial caries, constituting the, carious dentin group (CD). The specimens were air abraded for 15 seconds. The SD and CD groups were each randomly divided into three subgroups (N=10) according to the particle diameter employed (27, 50 and 125 pm). The prepared cavity was perpendicularly cut in half, and the profiles of all hemi-fragments were observed using SEM microscopy. The cavity measurements were made using a modified cephalometric analysis. The 27, 50 and 125 pun aluminum oxide particles did not present selectivity in the removal of carious dentin. However, when using the air abrasive technique for carious dentin treatment, the use of 27 and 50 pun aluminum oxide particles is recommended, due to their capacity to remove less sound tissue than the 125 pun particles.

Efficient plasmonic coupling between Er3+:(Ag/Au) in tellurite glasses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Glutathione transferase pi (GSTpi) expression in breast cancer: An immunohistochemical and molecular study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modification of surface properties of Ti-16Si-4B powder alloy by plasma immersion ion implantation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resposta do abacaxizeiro 'Vitória' a doses de nitrogênio em solos de tabuleiros costeiros da Paraíba

Informations about fertilization and mineral nutrition of the new fusariosis-resistant pineapple cultivars are still scarce, despite the importance of this crop. The purpose of this study was to evaluate the effect of increasing doses of N on fruit yield and quality of the pineapple cultivar 'Vitoria' grown on a 'Humiluvico Espodossolo' in the region of Tabuleiros Costeiros, in the state of Paraiba. The experiment was arranged in a randomized block design, using five N doses (100, 200, 300, 500 and 600 kg ha(-1)N, as urea) applied 60, 180 and 270 days after planting (dap) with three replications. The following variables were evaluated: length and fresh matter of the 'D' leaf; contents of N, P and K in the portions with and without chlorophyll, 300 and 420 dap; average weight, yield, physical properties (fruit weight, length and medium diameter; crown weight and length) and chemical properties (pH, soluble solids -SS, titrable acidity - AT, and the SS/AT ratio) of the fruits at harvest. Increasing N doses linearly increased length and fresh matter of the 'D' leaf and N content and decrease both P and K contents of the chlorophyll portion 300 dap, but did not affect nutrient contents 420 dap; in the chlorophyll-free portion. Increasing N doses, also, led to an increase in K contents 320 dap, but to reductions 420 dap. Individual fruit weight and total yield increased with increasing N doses, as maximum values of 1.0 kg and 37.9 t ha(-1) were estimated at doses of 409.0 and 439.0 kg ha(-1) N, respectively. The N doses did not affect the fruit quality properties, which were compatible with the characteristics described for this cultivar.

Tannery sludge compost amendment rates on soil microbial biomass of two different soils

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impedance spectroscopy study of dehydrated chitosan and chitosan containing LiClO4

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Early loading of single crowns supported by 6-mm-long implants with a moderately rough surface: a prospective 2-year follow-up cohort study

AimTo evaluate prospectively the clinical and radiographic outcomes after 2 years of loading of 6 mm long moderately rough implants supporting single crowns in the posterior regions.Material and methodsForty SLActive Straumann (R) short (6 mm) implants were placed in 35 consecutively treated patients. Nineteen implants, 4.1 mm in diameter, and 21 implants, 4.8 mm in diameter, were installed. Implants were loaded after 6 weeks of healing. Implant survival rate, marginal bone loss and resonance frequency analysis (RFA) were evaluated at different intervals. The clinical crown/implant ratio was also calculated.ResultsTwo out of 40 implants were lost before loading. Hence, the survival rate before loading was 95%. No further technical or biological complications were encountered during the 2-year follow-up. The mean marginal bone loss before loading was 0.34 +/- 0.38 mm. After loading, the mean marginal bone loss was 0.23 +/- 0.33 and 0.21 +/- 0.39 mm at the 1- and 2-year follow-ups. The RFA values increased between insertion (70.2 +/- 9) and the 6-week evaluation (74.8 +/- 6.1). The clinical crown/implant ratio increased with time from 1.5 at the delivery of the prosthesis to 1.8 after 2 years of loading.ConclusionShort implants (6 mm) with a moderately rough surface loaded early (after 6 weeks) during healing yielded high implant survival rates and moderate loss of bone after 2 years of loading. Longer observation periods are needed to draw more definite conclusions on the reliability of short implants supporting single crowns.To cite this article:Rossi F, Ricci E, Marchetti C, Lang NP, Botticelli D. Early loading of single crowns supported by 6-mm-long implants with a moderately rough surface: a prospective 2-year follow-up cohort study.Clin. Oral Impl. Res. 21, 2010; 937-943.doi: 10.1111/j.1600-0501.2010.01942.x.

Influence of lateral pressure to the implant bed on osseointegration: an experimental study in dogs

AimTo study osseointegration and bone-level changes at implants installed using either a standard or a reduced diameter bur for implant bed preparation.Material and methodsIn six Labrador dogs, the first and second premolars were extracted bilaterally. Subsequently, mesial roots of the first molars were endodontically treated and distal roots, including the corresponding part of the crown, were extracted. After 3 months of healing, flaps were elevated and recipient sites were prepared in all experimental sites. The control site was prepared using a standard procedure, while the test site was prepared using a drill with a 0.2 mm reduced diameter than the standard one used in the contra-lateral side. After 4 months of healing, the animals were euthanized and biopsies were obtained for histological processing and evaluation.ResultsWith the exception of one implant that was lost, all implants were integrated in mineralized bone. The alveolar crest underwent resorption at control as well as at test sites (buccal aspect similar to 1 mm). The most coronal contact of bone-to-implant was located between 1.2 and 1.6 mm at the test and between 1.3 and 1.7 mm at the control sites. Bone-to-implant contact percentage was between 49% and 67%. No statistically significant differences were found for any of the outcome variables.ConclusionsAfter 4 months of healing, lateral pressure to the implant bed as reflected by higher insertion torques (36 vs. 15 N cm in the premolar and 19 vs. 7 N cm in the molar regions) did not affect the bone-to-implant contact.To cite this article:Pantani F, Botticelli D, Garcia IR Jr., Salata LA, Borges GJ, Lang NP. Influence of lateral pressure to the implant bed on osseointegration: an experimental study in dogs.Clin. Oral Impl. Res. 21, 2010; 1264-1270.doi: 10.1111/j.1600-0501.2009.01941.x.

Enamel Defects in Maxillary Central Incisors of Infants With Unilateral Cleft Lip

Objective: To evaluate the presence of enamel alterations in deciduous maxillary central incisors of infants with unilateral cleft lip and alveolar ridge, with or without cleft palate, and to compare the occurrence and location of these alterations between the central incisor adjacent to the cleft and the contralateral incisor.Design: Intraoral clinical examination was performed after tooth cleaning and drying by a single examiner with the aid of a dental mirror, dental probe, and artificial light, with the child positioned on a dental chair. The defects were recorded in a standardized manner according to the criteria of the Modified Developmental Defects of Enamel Index.Setting: Hospital for Rehabilitation of Craniofacial Anomalies (HRAC) at Bauru, São Paulo, Brazil.Patients: One hundred one infants were evaluated. All were white, of both genders, aged 12 to 36 months and had at least two thirds of the crowns of maxillary incisors erupted.Results: Demarcated opacity was the most common defect at both cleft and noncleft sides, followed by diffuse opacity. The occurrence of hypoplasia at the cleft side was 11.8%. Most defects affected less than one third of the crown.Conclusion: The occurrence of enamel defects in deciduous maxillary central incisors of patients with unilateral cleft lip was 42.6%, mainly affecting the cleft side as to both number and severity.

Effect of different tannery sludge compost amendment rates on growth, biomass accumulation and yield responses of Capsicum plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Amino Acids on Mango Yield and Fruit Quality at Submedio Sao Francisco Region, Brazil

Farmers of the Submedio Sao Francisco Region (Brazil) have been spraying amino acids on mango trees with the objective of increasing panicle length and improving fruit retention and quality. This study, done in two experiments, tested the effect of amino acids sprayings at concentrations of 0.0%; 0.02%; 0.04% and 0.06%, on mango plants, 'Tommy Atkins', on the budding phase (panicles with 5 cm), fruit set and fruit growth (5 cm diameter). They were carried out from June to October in 2003, that is the natural period for harvest in the region, and from January to May, in 2004. There were no statistical differences in the first experiment among treatments regarding panicle length and fruit production, probably due to an appropriate management of nutrition, water and plant growth regulators, besides climatic conditions, mainly temperature and solar radiation. In the second experiment, significant increments in the panicle length of 13.37%, 11.70% and 21.4% were observed with amino acids concentrations, compared to the control. Increasing amino acids doses also enhanced the number of fruits per plant, thirty days before the harvest, in 16.17%, 45.32% and 37.38%, respectively, compared to the control, but there were no significant statistical differences. Characteristics of fruit quality during storage, as weight loss, total soluble solids, total titratable acidity and pulp firmness were not significantly affected by amino acids spraying. Changes on those variables were registered as a consequence of fruit ripening. Amino acids sprays lightly delayed the evolution of skin luminosity and Hue of pulp, but the differences could not be visually identified. The concentrations of amino acids were not efficient for improving the natural concentrations of these substances in the leaves, which could be the reason for the non significant effects on the variables analyzed.

The valuable role of renucleation rate in ultrananocrystalline diamond growth

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)