Constructing Ethical Patterns in Times of Globalization : Hans Küng's Global Ethic Project and Beyond

The purpose of this study is to evaluate contemporary philosophical models for global ethics in light of the Catholic theologian Hans Küng s Global Ethic Project (Projekt Weltethos). Küng s project starts with the motto, No survival without world ethos. No global peace without peace between religions. I will use the philosophically multidimensional potential of Projekt Weltethos in terms of its possible philosophical interpretations to evaluate the general discussion of global ethics within political philosophy today. This is important in its own right, but also because through it, opportunities will emerge to articulate Küng s relatively general argument in a way that leaves less room for mutually contradictory concretizations of what global ethics ultimately should be like. The most important question in this study is the problem of religious and ideological exclusivism and its relation to the ethically consistent articulation of global ethics. I will first explore the question of the role of religion as the basis for ethics in general and what Küng may mean by his claim that only the unconditional can oblige unconditionally. I will reconstruct two different overall philosophical interpretations of the relationship between religious faith and human rationality, each having two different sub-divisions: a liberal interpretation amounts to either a Kantian-Scheiermacherian or a Jaspersian view, whereas what I call postliberal interpretation amounts to either an Aristotelian-Thomistic or an Augustinian view. Thereafter, I will further clarify how Küng views the nature of ethics beyond the question of its principal foundation in religious faith: Küng searches for a middle way between consequentialist and non-consequentialist ethics, a way in which the latter dimension has the final stake. I will then set out to concretize further this more or less general notion of the theoretical potential of Projekt Weltethos in terms of certain precise philosophico-political models. I categorize these models according to their liberal or postliberal orientation. The liberal concretization leads me to consider a wide spectrum of post-Kantian and post-Hegelian models from Rawls to Derrida, while the alternative concretization opens up my ultimate argument in favor of a postliberal type of modus vivendi. I will suggest that the only theoretically and practically plausible way to promote global ethics, in itself a major imperative today, is the recognition of a fundamental and necessary contest between mutually exclusive ideologies in the public sphere. On this basis I will proceed to my postliberal proposal, namely, that a constructive and peaceful encountering of exclusive difference as an ethical vantage point for an intercultural and inter-religious peace dialogue is the most acute challenge for global ethics today.

Christian-Muslim Dialogue : Perspectives of Four Lebanese Thinkers

This study describes and analyses two Lebanese Muslims and two Lebanese Christians ideas about Christian-Muslim dialogue, its nature, aims, and methods and its different dimensions, which include doctrinal, ethical, and social dimensions. On the basis of the analysis, the four thinkers contributions for promoting constructive dialogue are evaluated. The persons studied are two religious authorities, the Shiite Great Ayatollah Muhammad Husayn Fadlallah (b. 1935) and the Eastern Orthodox Metropolitan of Mount Lebanon, Georges Khodr (b. 1923), and two academic scholars, Doctor Mahmoud Ayoub (b. 1935) and Doctor, Father Mouchir Aoun (b. 1964), from the Shiite and Greek Catholic communities, respectively. The method of the study is systematic analysis. The sources consist of the four thinkers writings on Christian-Muslim relations, the most of which have been published in Lebanon in the 1990s and 2000s in the Arabic language. In their general guidelines for Christian-Muslim dialogue, the four authors do not offer any novel or unusual insights. However, their dialogue visions are multi-faceted, motivating interreligious encounter both on religious and practical grounds and clarifying the theological grounds and socio-political conditions of this endeavour. The major challenge appears to be the tension between loyalty to one s own convictions and taking into account the particular self-understanding of the other. While this tension may be ultimately unsolvable, it is obvious that linking dialogue tightly to missionary motivations or certain theological agenda imposed on the others is not conducive for better mutual understanding. As for how diverse theologies of religions affect interreligious dialogue, narrow exclusivism hardly promotes mutual knowledge and appreciation, but also inclusive and pluralistic positions have their particular dilemmas. In the end, dialogue is possible from diverse positions on theology of religions. All the authors discuss the theological themes of divine revelation, concept of God, and human condition and ultimate destiny. The two religions particular views on these issues cannot be reconciled, but the authors offer diverse means to facilitate mutual understanding on them, such as increasing mutual knowledge, questioning certain traditional condemnations, showing theological parallels between the two religions, and transcending doctrinal disagreements by stressing common religious experience or ethical concerns. Among the theological themes, especially the concept of God seems to offer possibilities for better understanding than has traditionally been the case. Significantly, all the four authors maintain that Christians and Muslims share the faith in the one God, irrespective of their disagreements about the nature of his oneness. Basic ethical principles are not discussed as widely by the four authors as might be expected, which may reflect the shared cultural background and common ethical values of the Lebanese Muslims and Christians. On this level, Christians alienation from the Islamic law appears as the most significant challenge to mutual understanding, while neighbourly love and the golden rule of ethics offer a fruitful basis for further dialogue. As for the issue of political power-sharing in Lebanon, it is clear that the proposal of an Islamic state is problematic in a country with a sizable Christian minority and a heterogeneous Muslim population. Some form of democracy seems more viable for a multireligious country, but the question remains how to retain religion as a vital force in society, which is felt to be important by all the four Lebanese authors.

Wrought aluminum-nickel alloys for high strength-high conductivity applications

Aluminum-Nickel alloys ranging from 0.06 pct to 6.1 pct (by wt) Ni have been developed for high strength-high conductivity applications. These alloys were produced by solidification in a permanent mold followed by homogenization, hot extrusion or hot rolling and cold drawing to wire form. This sequence of fabrication a) led to the production of fine fibrous dispersoids of NiAl3 as part of the Al-NiAl3 eutectic during the initial casting operation, b) permitted the retention of fine fibrous dispersiods of NiAl3 produced during casting without any significant coarsening during processing and c) led to uniform dispersion and general alignment of these fibrous dispersoids along a given direction in the product without any measurable fiber-matrix separation, extensive fiber-fragmentation or crack production in the matrix. These alloys can be processed to wire form as easily as aluminum and when processed by the above sequence, possess very attractive combination of high strength-high electrical conductivity. Tensile strengths range from 173 N/mm2 (at 0.6 pct Ni) to 241 N/mm2 (at 6.1 pct Ni) in combination with corresponding conductivity values between 62 pct IACS and 55.5 pct IACS. The wires also possess attractive yield strength; for instance, the 0.2 pct off-set strength of Al-6.1 pct Ni wire is 213 N/mm2. Using simple composite rules, the estimated strength and the conductivity of NiAl3 fibers were found to be 1380 N/mm2 and 18 pct IACS respectively, in these wires.

Essays on corporate governance, stakeholders, and restructuring

This dissertation consists of an introductory section and three theoretical essays analyzing the interaction of corporate governance and restructuring. The essays adopt an incomplete contracts approach and analyze the role of different institutional designs to facilitate the alignment of the objectives of shareholders and management (or employees) over the magnitude of corporate restructuring. The first essay analyzes how a firm's choice of production technology affects the employees' human capital investment. In the essay, the owners of the firm can choose between a specific and a general technology that both require a costly human capital investment by the employees. The specific technology is initially superior in using the human capital of employees but, in contrast to the general technology, it is not compatible with future innovations. As a result, anticipated changes in the specific technology diminish the ex ante incentives of the employees to invest in human capital unless the shareholders grant the employees specific governance mechanisms (a right of veto, severance pay) so as to protect their investments. The results of the first essay indicate that the level of protection that the shareholders are willing to offer falls short of the socially desirable one. Furthermore, when restructuring opportunities become more abundant, it becomes more attractive both socially and from the viewpoint of the shareholders to initially adopt the general technology. The second essay analyzes how the allocation of authority within the firm interacts with the owners' choice of business strategy when the ability of the owners to monitor the project proposals of the management is biased in favor of the status quo strategy. The essay shows that a bias in the monitoring ability will affect not only the allocation of authority within the firm but also the choice of business strategy. Especially, when delegation has positive managerial incentive effects, delegation turns out to be more attractive under the new business strategy because the improved managerial incentives are a way for the owners to compensate their own reduced information gathering ability. This effect, however, simultaneously makes the owners hesitant to switch the strategy since it would involve a more frequent loss of control over the project choice. Consequently, the owners' lack of knowledge of the new business strategy may lead to a suboptimal choice of strategy. The third essay analyzes the implications of CEO succession process for the ideal board structure. In this essay, the presence of the departing CEO on the board facilitates the ability of the board to find a matching successor and to counsel him. However, the ex-CEO's presence may simultaneously also weaken the ability of the board to restructure since the predecessor may use the opportunity to distort the successor's project choice. The results of the essay suggest that the extent of restructuring gains, the firm's ability to hire good outside directors and the importance of board's advisory role affect at which point and for how long the shareholders may want to nominate the predecessor to the board.

State Agent, Identity and the "New World Order" : Reconstructing Polish Defence Identity after the Cold War Era

National identity signifies and makes state s defence- and foreign policy behaviour meaningful. National consciousness is narrated into existence by narratives upon one s own exceptionalism and Otherness of the other nations. While national identity may be understood merely as a self-image of a nation, defence identity refers to the borders of Otherness and issues that have been considered as worth defending for. As national identities and all the world order models are human constructions, they may be changed by the human efforts as well; states and nations may deliberately promote communitarian or even cosmopolitan equality and tolerance without borders of Otherness. The main research question of the thesis is: How does Poland constitute herself as a nation and a state agent in the current world order and to what extent have contextual foreign and defence policy interactions changed the Polish defence identity during the post-Cold War era? The main empirical argument of the thesis is: Poland is a narrated idea of a Christian Catholic nation-state, which the Polish State, the Catholic Church of Poland, the Armed Forces of Poland as well as a majority of the Polish nation share. Polish defence identity has been almost impenetrable to contextual foreign and defence policy interactions during the post-Cold War era. While Christian religious ontology binds corporate Poland together, allowing her to survive any number of military and political catastrophes, it simultaneously brings her closer to the USA, raises tensions in the infidel EU-context, and restrains corporate Poland s pursuit of communitarian, or even cosmopolitan, global equality and tolerance. It is not the case that corporate Poland s foreign and defence policy orientation is instinctively Atlanticist by nature, as has been argued. Rather, it has been the State s rational project to overcome a habituated and reified fear of becoming geopolitically sandwiched between Russian and German Others by leaning on the USA; among the Polish nation, support for the USA has been declining since 2004. It is not corporate Poland either that has turned into a constructive European , as has been argued, but rather the Polish nation that has, at least partly, managed to emancipate itself from its habituation to a betrayal by Europe narrative, since it favours the EU as much as it favours NATO. It seems that in the Polish case a truly common European CFSP vis-à-vis Russia may offer a solution that will emancipate the Polish State from its habituated EU-sceptic role identity and corporate Poland from its narrated borders of Otherness towards Russia and Germany, but even then one cannot be sure whether any other perspective than the Polish one on a common stand towards Russia would satisfy the Poles themselves.

Automatic Path Planning and Control Design for Autonomous Landing of UAVs using Dynamic Inversion

In this paper a nonlinear control has been designed using the dynamic inversion approach for automatic landing of unmanned aerial vehicles (UAVs), along with associated path planning. This is a difficult problem because of light weight of UAVs and strong coupling between longitudinal and lateral modes. The landing maneuver of the UAV is divided into approach, glideslope and flare. In the approach UAV aligns with the centerline of the runway by heading angle correction. In glideslope and flare the UAV follows straight line and exponential curves respectively in the pitch plane with no lateral deviations. The glideslope and flare path are scheduled as a function of approach distance from runway. The trajectory parameters are calculated such that the sink rate at touchdown remains within specified bounds. It is also ensured that the transition from the glideslope to flare path is smooth by ensuring C-1 continuity at the transition. In the outer loop, the roll rate command is generated by assuring a coordinated turn in the alignment segment and by assuring zero bank angle in the glideslope and flare segments. The pitch rate command is generated from the error in altitude to control the deviations from the landing trajectory. The yaw rate command is generated from the required heading correction. In the inner loop, the aileron, elevator and rudder deflections are computed together to track the required body rate commands. Moreover, it is also ensured that the forward velocity of the UAV at the touch down remains close to a desired value by manipulating the thrust of the vehicle. A nonlinear six-DOF model, which has been developed from extensive wind-tunnel testing, is used both for control design as well as to validate it.

Orientational ordering in sheared inelastic dumbbells

Using even driven simulations, we show that homogeneously sheared inelastic dumbbells in two dimensions are randomly orientated in the limit of low density. As the packing fraction is increased, particles first tend to orient along the extensional axis, and then as the packing fraction is further increased, the alignment shifts closer to the flow axis. The orientational order parameter displays a continuous increase with packing fraction and does not appear to exhibit a universal scaling with elongation. Except at the highest packing fractions, the orientational distribution function can be reconstructed with only the first coefficient of the Fourier expansion.

Primary structure of a Thomsen-Friedenreich-antigen-specific lectin, jacalin [Artocarpus integrifolia (jack fruit) agglutinin]. Evidence for the presence of an internal repeat

Jacalin [Artocarpus integrifolia (jack fruit) agglutinin] is made up of two types of chains, heavy and light, with M(r) values of 16,200 +/- 1200 and 2090 +/- 300 respectively (on the basis of gel-permeation chromatography under denaturing conditions). Its complete amino acid sequence was determined by manual degradation using a 4-dimethylaminoazobenzene 4'-isothiocyanate double-coupling method. Peptide fragments for sequence analysis were obtained by chemical cleavages of the heavy chain with CNBr, hydroxylamine hydrochloride and iodosobenzoic acid and enzymic cleavage with Staphylococcus aureus proteinase. The peptides were purified by a combination gel-permeation and reverse-phase chromatography. The light chains, being only 20 residues long, could be sequenced without fragmentation. Amino acid analyses and carboxypeptidase-Y-digestion C-terminal analyses of the subunits provided supportive evidence for their sequence. Computer-assisted alignment of the jacalin heavy-chain sequence failed to show sequence similarity to that of any lectin for which the complete sequence is known. Analyses of the sequence showed the presence of an internal repeat spanning residues 7-64 and 76-130. The internal repeat was found to be statistically significant.

An assessment of m-health in developing countries using task technology fit model

Health challenges present arguably the most significant barrier to sustainable global development. The introduction of ICT in healthcare, especially the application of mobile communications, has created the potential to transform healthcare delivery by making it more accessible, affordable and effective across the developing world. However, current research into the assessment of mHealth from the perspective of developing countries particularly with community Health workers (CHWs) as primary users continues to be limited. The aim of this study is to analyze the contribution of mHealth in enhancing the performance of the health workers and its alignment with existing workflows to guide its utilization. The proposed research takes into account this consideration and aims to examine the task-technology alignment of mHealth for CHWs drawing upon the task technology fit as the theoretical foundation.

A brilliant breakthrough in OI type V

Interferon-induced transmembrane protein 5 or bone-restricted i ifitm-like gene (Bril) was first identified as a bone gene in 2008, although no in vivo role was identified at that time. A role in human bone has now been demonstrated with a number of recent studies identifying a single point mutation in Bril as the causative mutation in osteogenesis imperfecta type V (OI type V). Such a discovery suggests a key role for Bril in skeletal regulation, and the completely novel nature of the gene raises the possibility of a new regulatory pathway in bone. Furthermore, the phenotype of OI type V has unique and quite divergent features compared with other forms of OI involving defects in collagen biology. Currently it appears that the underlying genetic defect in OI type V may be unrelated to collagen regulation, which also raises interesting questions about the classification of this form of OI. This review will discuss current knowledge of OI type V, the function of Bril, and the implications of this recent discovery.

Garden of Shrinking Violets

Description of the work Garden of Shrinking Violets is a collection of six half scale garments and three illustrations, continuing the practice-led research project into design for disassembly, developed in the work Shrinking Violets (2015). All garments are constructed in laser cut modules that enable the items to be reassembled in new combinations. The project extended the materials used to include ahimsa (peace) silk, silk organza and silk twill. The pattern pieces have internal laser cut grids of 5mm circles, allowing the textiles to be layered, threaded and knotted to achieve rich embellished surfaces that play with the transparencies and colour overlays of the sheer and opaque silks. Research Background Conceptually grounded in design for sustainability, the aim of the work is to develop approaches to garment construction that could allow users to engage with the garments by adding, removing and reconfiguring elements. This approach to design considers the use and end-of-life phases of the transient fashion garment through considering how the garments can be later disassembled. Research Contribution This construction process is unique in being not only a patterning device but also integral to the garment’s construction. This work sits at the intersection of technical design and craft: the laser cutting and technical approach to developing new forms of garment construction is coupled with the artisanal approach of hand-knotting, a reference to traditional quilting techniques, as a method to layer and pattern the textiles. The technique developed in Shrinking Violets was extended to experiment with different grid structures, knotting devices, and decorative fringing. The result is a proposed construction system in which the laser cut grid and knotting form a decorative patterning device, but are also integral to the garments’ construction. Research Significance Garden of Shrinking Violets was exhibited at artisan gallery’s Ivory Street window, Brisbane, January 18 – February 28 2016. The work was selected by artisan gallery exhibition curators. As part of artisan gallery’s public programming, the author participated in a panel discussion: ‘Constructive conversations: deconstruction and reconstruction in contemporary craft and design’ with jeweller Elizabeth Shaw and visual arts lecturer Courtney Pedersen, 20 February 2016. Photography used in illustrations by Jonathan Rae

Aircraft trajectory clustering techniques using circular statistics

This paper presents a statistical aircraft trajectory clustering approach aimed at discriminating between typical manned and expected unmanned traffic patterns. First, a resampled version of each trajectory is modelled using a mixture of Von Mises distributions (circular statistics). Second, the remodelled trajectories are globally aligned using tools from bioinformatics. Third, the alignment scores are used to cluster the trajectories using an iterative k-medoids approach and an appropriate distance function. The approach is then evaluated using synthetically generated unmanned aircraft flights combined with real air traffic position reports taken over a sector of Northern Queensland, Australia. Results suggest that the technique is useful in distinguishing between expected unmanned and manned aircraft traffic behaviour, as well as identifying some common conventional air traffic patterns.

A Search for Energy Minimized Sequences of Proteins

In this paper, we present numerical evidence that supports the notion of minimization in the sequence space of proteins for a target conformation. We use the conformations of the real proteins in the Protein Data Bank (PDB) and present computationally efficient methods to identify the sequences with minimum energy. We use edge-weighted connectivity graph for ranking the residue sites with reduced amino acid alphabet and then use continuous optimization to obtain the energy-minimizing sequences. Our methods enable the computation of a lower bound as well as a tight upper bound for the energy of a given conformation. We validate our results by using three different inter-residue energy matrices for five proteins from protein data bank (PDB), and by comparing our energy-minimizing sequences with 80 million diverse sequences that are generated based on different considerations in each case. When we submitted some of our chosen energy-minimizing sequences to Basic Local Alignment Search Tool (BLAST), we obtained some sequences from non-redundant protein sequence database that are similar to ours with an E-value of the order of 10(-7). In summary, we conclude that proteins show a trend towards minimizing energy in the sequence space but do not seem to adopt the global energy-minimizing sequence. The reason for this could be either that the existing energy matrices are not able to accurately represent the inter-residue interactions in the context of the protein environment or that Nature does not push the optimization in the sequence space, once it is able to perform the function.

Mutational analysis of active-site residues in the Mycobacterium leprae RecA intein, a LAGLIDADG homing endonuclease: Asp(122) and Asp(193) are crucial to the double-stranded DNA cleavage activity whereas Asp(218) is not

Mycobacterium leprae recA harbors an in-frame insertion sequence that encodes an intein homing endonuclease (PI-MleI). Most inteins (intein endonucleases) possess two conserved LAGLIDADG (DOD) motifs at their ctive center. A common feature of LAGLIDADG-type homing endonucleases is that they recognize and cleave the same or very similar DNA sequences. However, PI-MleI is distinctive from other members of the family of LAGLIDADG-type HEases for its modular structure with functionally separable domains for DNA-binding and cleavage, each with distinct sequence preferences. Sequence alignment analyses of PI-MleI revealed three putative LAGLIDADG motifs; however, there is conflicting bioinformatics data in regard to their identity and specific location within the intein polypeptide. To resolve this conflict and to determine the active-site residues essential for DNA target site recognition and double-stranded DNA cleavage, we performed site-directed mutagenesis of presumptive catalytic residues in the LAGLIDADG motifs. Analysis of target DNA recognition and kinetic parameters of the wild-type PI-MleI and its variants disclosed that the two amino acid residues, Asp(122) (in Block C) and Asp(193) (in functional Block E), are crucial to the double-stranded DNA endonuclease activity, whereas Asp(218) (in pseudo-Block E) is not. However, despite the reduced catalytic activity, the PI-MleI variants, like the wild-type PI-MleI, generated a footprint of the same length around the insertion site. The D122T variant showed significantly reduced catalytic activity, and D122A and D193A mutations although failed to affect their DNA-binding affinities, but abolished the double-stranded DNA cleavage activity. On the other hand, D122C variant showed approximately twofold higher double-stranded DNA cleavage activity, compared with the wild-type PI-MleI. These results provide compelling evidence that Asp(122) and Asp(193) in DOD motif I and II, respectively, are bona fide active-site residues essential for DNA cleavage activity. The implications of these results are discussed in this report.

Use of structure-directed DNA ligands to probe the binding of recA protein to narrow and wide grooves of DNA and on its ability to promote homologous pairing

We have used circular dichroism and structure-directed drugs to identify the role of structural features, wide and narrow grooves in particular, required for the cooperative polymerization, recognition of homologous sequences, and the formation of joint molecules promoted by recA protein. The path of cooperative polymerization of recA protein was deduced by its ability to cause quantitative displacement of distamycin from the narrow groove of duplex DNA. By contrast, methyl green bound to the wide groove was retained by the nucleoprotein filaments comprised of recA protein-DNA. Further, the mode of binding of these ligands and recA protein to DNA was confirmed by DNaseI digestion. More importantly, the formation of joint molecules was prevented by distamycin in the narrow groove while methyl green in the wide groove had no adverse effect. Intriguingly, distamycin interfered with the production of coaggregates between nucleoprotein filaments of recA protein-M13 ssDNA and naked linear M13 duplex DNA, but not with linear phi X174 duplex DNA. Thus, these data, in conjunction with molecular modeling, suggest that the narrow grooves of duplex DNA provide the fundamental framework required for the cooperative polymerization of recA protein and alignment of homologous sequences. These findings and their significance are discussed in relation to models of homologous pairing between two intertwined DNA molecules.