Organic and total mercury determination in sediments by cold vapor atomic absorption spectrometry: methodology validation and uncertainty measurements

The purpose of the present study was to validate a method for organic Hg determination in sediment. The procedure for organic Hg was adapted from literature, where the organomercurial compounds were extracted with dichloromethane in acid medium and subsequent destruction of organic compounds by bromine chloride. Total Hg was performed according to 3051A USEPA methodology. Mercury quantification for both methodologies was then performed by CVAAS. Methodology validation was verified by analyzing certified reference materials for total Hg and methylmercury. The uncertainties for both methodologies were calculated. The quantification limit of 3.3 µg kg-1 was found for organic Hg by CVAAS.

Determinação de glicerol livre e total em amostras de biodiesel por método enzimático com detecção colorimétrica

A method based on enzymatic activities was developed using three enzymes (glycerokinase, glycerol-3-phosphate oxidase and peroxidase) and colorimetric detection for the determination of glycerol in biodiesel. The enzymatic conversion of glycerol produces H2O2 that is eliminated by the action of peroxidase, an oxygen acceptor and 4- aminoantipirine, producing water and a colored compound, which was analyzed. This method showed good linear correlation coefficient (r = 0.9937) in the concentration range of 4.95 x 10-5 to 3.96 x 10-4% (w/w) and had experimental limits of detection and quantitation of 7.10 x 10-6 and 2.10 x 10-5% (w/w), respectively.

Development of a UV/Vis spectrophotometric method for analysis of total polyphenols from Caesalpinia peltophoroides Benth

Caesalpinia peltophoroides is a domesticated tree found in Brazil. It was necessary to develop an analytical method to determine the content of total polyphenols (TP) in this herbal drug. The pre-analytical method was standardized for analysis time, wavelength, and the best standard to use. The optimum conditions were: pyrogallol, 760 nm, and 30 min respectively. Under these conditions, validation by UV/Vis spectrophotometry proved to be reliable for TP of the crude extract and semipurified fractions from C. peltophoroides. Standardization is required for every herbal drug, and this method proved to be linear, precise, accurate, reproducible, robust, and easy to perform.

Determinação de Cu, Fe, Mn, Zn e do teor de proteína total em amostras de trigo e soja após procedimento de extração sequencial

A sequential extraction procedure was applied to wheat and soybean seed samples. The total protein content (determined by two distinct methods: Bradford and bicinchoninic acid-BCA) and distribution of Cu, Fe, Mn and Zn in each fraction was determined. The sequential extraction employed four different solutions: water, 0.5 mol L-1 NaCl, ethanol/water (70:30 v v-1) and 0.5 mol L-1 NaOH. For both samples, the highest concentration of metals was observed in those extracts associated with globulin-type proteins using NaCl solution. Regarding protein content, higher levels were obtained using the BCA method.

Treated domestic sewage: kinetics of Escherichia coli and total coliform inactivation by oxidation with hydrogen peroxide

Hydrogen peroxide has been used for decades in developed countries as an oxidizing agent in the treatment of water, domestic sewage and industrial effluents. This study evaluated the influence of the concentration of H2O2 and pH on the inactivation of Escherichia coli cells and the disinfection of sewage treated. The results showed that the inactivation rate increased with pH and H2O2. The presence of other contaminants dissolved in the effluent is probably the cause of these differences, because E. coli inactivation in synthetic wastewater was found to be much faster than in the real treated domestic sewage.

Estudo comparativo entre as metodologias eschka, infravermelho, condutividade térmica (TCD) e ultravioleta para a determinação de enxofre total em combustíveis sólidos

The oxidation of sulphur compounds upon burning emits large quantities of SOx into the atmosphere. Therefore, there is growing interest in fast and accurate methods for analyzing sulphur content in fuels. The objective of this work was to compare four different methods of total sulphur determination in solid fuels. The methods used in this work were Eschka, Infrared, Thermal Conductivity Detection (TCD) and Ultraviolet Fluorescence Detection (UV). The preliminary results showed that TCD and UV methods (nonstandard methods for solid fuels) have similar precision to the infrared method (standard method) for high-sulphur coal samples.

Optimization of solvent mixtures for extraction from bark of Schinus terebinthifolius by a statistical mixture-design technique and development of a UV-Vis spectrophotometric method for analysis of total polyphenols in the extract

A statistical mixture-design technique was used to study the effects of different solvents and their mixtures on the yield, total polyphenol content, and antioxidant capacity of the crude extracts from the bark of Schinus terebinthifolius Raddi (Anacardiaceae). The experimental results and their response-surface models showed that ternary mixtures with equal portions of all the three solvents (water, ethanol and acetone) were better than the binary mixtures in generating crude extracts with the highest yield (22.04 ± 0.48%), total polyphenol content (29.39 ± 0.39%), and antioxidant capacity (6.38 ± 0.21). An analytical method was developed and validated for the determination of total polyphenols in the extracts. Optimal conditions for the various parameters in this analytical method, namely, the time for the chromophoric reaction to stabilize, wavelength of the absorption maxima to be monitored, the reference standard and the concentration of sodium carbonate were determined to be 5 min, 780 nm, pyrogallol, and 14.06% w v-1, respectively. UV-Vis spectrophotometric monitoring of the reaction under these conditions proved the method to be linear, specific, precise, accurate, reproducible, robust, and easy to perform.

Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy and chemometric techniques for the determination of adulteration in petrodiesel/biodiesel blends

We propose an analytical method based on fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy to detect the adulteration of petrodiesel and petrodiesel/palm biodiesel blends with African crude palm oil. The infrared spectral fingerprints from the sample analysis were used to perform principal components analysis (PCA) and to construct a prediction model using partial least squares (PLS) regression. The PCA results separated the samples into three groups, allowing identification of those subjected to adulteration with palm oil. The obtained model shows a good predictive capacity for determining the concentration of palm oil in petrodiesel/biodiesel blends. Advantages of the proposed method include cost-effectiveness and speed; it is also environmentally friendly.

Análise exploratória aplicada a espectros de reflexão total atenuada no infravermelho com transformada de Fourier (ATR-FTIR) de blendas de biodiesel/diesel

In this study, hierarchical cluster analysis (HCA) and principal component analysis (PCA) were used to classify blends produced from diesel S500 and different kinds of biodiesel produced by the TDSP methodology. The different kinds of biodiesel studied in this work were produced from three raw materials: soybean oil, waste cooking oil and hydrogenated vegetable oil. Methylic and ethylic routes were employed for the production of biodiesel. HCA and PCA were performed on the data from attenuated total reflectance Fourier transform infrared spectroscopy, showing the separation of the blends into groups according to biodiesel content present in the blends and to the kind of biodiesel used to form the mixtures.

SÍNTESE DE ÁCIDOS CUMARINO-3-CARBOXÍLICOS E SUA APLICAÇÃO NA SÍNTESE TOTAL DA AIAPINA, CUMARINA E UMBELIFERONA

The synthesis of 3-coumarin-carboxylic acids and their application to the total synthesis of the natural products ayapin, coumarin, and umbeliferone in undergraduate organic chemistry experiments is described herein. The synthetic approach consists of a one-pot cyclization between salyciladehydes and Meldrum's acid in water to produce the above mentioned acids, followed by decarboxylation under basic or radical conditions.

Sobrevivência de Rotylenchulus reniformis em solo naturalmente infestado submetido a diferentes períodos de armazenamento

O nematóide reniforme (Rotylenchulus spp.) sobrevive à dissecação melhor que a maioria das espécies de fitonematóides, havendo relato de sobrevivência de R. reniformis após 29 meses na ausência da hospedeira. O presente estudo teve como objetivo investigar a sobrevivência de R. reniformis na ausência de hospedeira em solo naturalmente infestado, submetendo-o a diferentes períodos de armazenamento em laboratório. Aos 45, 90, 135 e 180 dias após o armazenamento, cinco amostras foram acondicionadas em vasos, onde foram plantados meloeiros (Cucumis melo) cv. Amarelo Ouro que foram mantidos em casa de vegetação por 80 dias. Foram avaliados os números totais de juvenis, machos e fêmeas imaturas no solo, fêmeas adultas na raiz e total de nematóides (solo+raiz) por unidade experimental. Testaram-se, em seguida, modelos lineares, logarítmicos e quadráticos para descrever o comportamento de cada variável em função do tempo de armazenamento. Os modelos quadráticos descreveram melhor a variação ocorrida, exceto para o número de fêmeas na raiz. As populações tenderam a decrescer após 90 dias de armazenamento, no entanto, após 180 dias de armazenamento e subseqüente cultivo do meloeiro no solo armazenado, a população no momento da colheita era equivalente a 83,41% da população de nematóides presentes no solo quando da coleta no campo.

Total Cost of Ownership - Elinkaarilaskennan sovellus

Ostotapahtumassa kiinnitetään usein huomiota hintaan, mutta hankintapäätökseen vaikuttavat myös muutkin kustannukset. Ongelman asiassa aiheuttaa kokonaiskustannusvaikutuksien arvioinnin ja mittauksen haasteellisuus, sekä kunnollisen raportointijärjestelmän puuttuminen. Hankinnan kokonaiskustannusten selvittäminen pitkällä aikavälillä on kuitenkin tärkeää, koska hankintojen osuus yritysten liikevaihdoista on jatkuvassa kasvussa. Työn tarkoituksena oli tarkastella Total cost of ownershipia, eli TCO:ta, elinkaarilaskennan sovellusta. Tarkastelun aluksi työlle luotiin teoreettinen pohja käyttäen hyväksi kirjallisuutta, artikkeleita sekä www-dokumentteja. Teoriaosuus rakentui kustannuslaskennan osalta kustannusten tunnistamisesta, jakamisesta ja kohdistamisesta. TCO:sta luotiin mahdollisimman laaja-alainen teoreettinen kuvaus. Seuraavaksi työssä käsiteltiin TCO:n soveltamista sen perinteisimpiin käyttökohteisiin: taloudellisesti merkittäviin hankintoihin, ulkoistamispäätöksiin, hinnoitteluun sekä toimittajien suorituskyvyn seurantaan ja analysointiin. TCO:n soveltamista käsittelevä osuus päätettiin kotimaisilla esimerkeillä TCO:n soveltamisesta IT-hankintojen apuvälineenä. Työ päätettiin käymällä läpi työtä tehdessä kypsyneet ajatukset sekä johtopäätökset.

Use of a Ca-selective electrode in the determination of total Ca in the production of crude sugar. Preliminary studies

The determination of the total calcium in juice, syrups, and other products of the sugar industry is investigated. Total calcium and free calcium is determinated by AAS and employing Ca-selective electrode respectively. A coefficient is obtained for the relation of total calcium with respect to free calcium. The coefficient is employed to determine the content of total calcium in accordance with the following equation.

Extração de amônio de filtros de amostragem, coleta e determinação pelo método da gota suspensa

A amostragem de amônia no ar é feita usualmente com filtro impregnado com ácido. O ácido ascórbico, quando usado como impregnante, é facilmente oxidado em meio básico e aquoso, gerando uma solução fortemente colorida que inviabiliza a determinação por colorimetria. Este trabalho apresenta um novo procedimento para extração do íon amônio dos filtros de amostragem, transferindo o íon amônio para uma gota de solução contendo ácido sulfúrico 0,1 mol L-1. A amostra do filtro é inicialmente solubilizada com água. A solução é colocada dentro de uma câmara com posterior adição de solução de NaOH 1,5 mol L-1. Com a ajuda de com borbulhamento de nitrogênio, a amônia formada passa para a fase gasosa, sendo finalmente recolhida para uma gota de ácido sulfúrico. A esta gota é adicionado um reagente e o produto determinado colorimetricamente pela reação do indofenol. Além da eliminação de interferentes, o procedimento apresenta a vantagem de fazer uma nova pré-concentração da amônia, possibilitando melhorar o limite de detecção do método de determinação.