Pré-concentração de cádmio com Saccharomyces cerevisiae e determinação em águas fluviais usando espectrometria de emissão óptica com plasma indutivamente acoplado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalence of pigs infected by Salmonella typhimurium at slaughter after an enterocolitis outbreak

A cross-sectional study was performed to estimate the prevalence of slaughter pigs infected by Salmonella typhimurium after an enterocolitis outbreak in a commercial pig farm, which was characterised by diarrhoea during the growing phase. Anatomopathological and histopathological findings were suggestive of salmonellosis, which was further confirmed by isolation of S. typhimurium from organs and faeces samples from diseased animals. Ileocolic lymph nodes were aseptically collected from 43 pigs during slaughter procedures. The estimated prevalence of Salmonella-infected pigs was 53.48% [confidence interval (CI): 42.94:64.02%]. This finding demonstrates that the carriage of S. typhimurium at slaughter might be high if pigs originate from a batch previously affected by Salmonella-enterocolitis outbreak at the pre-harvest pork production chain. (c) 2005 Elsevier B.V. All rights reserved.

Biodigestão anaeróbia dos dejetos de cabritos Saanen alimentados com dietas com diferentes proporções volumoso e concentrado

Avaliaram-se os efeitos da idade do animal e da proporção de volumoso nas dietas sobre a biodigestão anaeróbia dos dejetos de cabritos Saanen. Foram utilizadas as fezes produzidas por cabritos Saanen aos 90, 120 e 150 dias de idade e alimentados com dietas de três relações volumoso:concentrado (80:20, 60:40 e 40:60), representando as dietas 1, 2 e 3, respectivamente. Utilizaram-se biodigestores tipo batelada de bancada com capacidade para 12 litros de substrato em fermentação e 8% de sólidos totais iniciais para determinação das produções e dos potenciais de produção de biogás e metano, da redução de sólidos voláteis e quantificação dos teores de minerais no afluente e efluente. As maiores reduções de sólidos voláteis foram observadas nos substratos preparados com as fezes de cabritos aos 150 dias alimentados com a dieta com relação volumoso:concentrado de 40:60. Os melhores rendimentos de substrato ou fezes foram obtidos com os dejetos dos cabritos de 120 e 150 dias de idade alimentados com a dieta com relação volumoso:concentrado 40:60. As maiores concentrações de minerais nos biodigestores foram observadas para as fezes de cabritos de 150 dias de idade alimentados com a dieta com relação volumoso:concentrado 40:60. A biodigestão anaeróbia é eficiente na remoção de coliformes nos dejetos de caprinos, proporcionando efluentes com no máximo 4,3 × 10² coliformes totais termotolerantes por grama de material.

Biodigestão anaeróbia de dejetos de caprinos obtidos nas diferentes estações do ano

Foram utilizados dejetos produzidos por caprinos, em diferentes estádios fisiológicos e submetidos ao mesmo regime alimentar, nas quatro estações do ano. O objetivo foi avaliar o efeito das estações do ano sobre a digestão anaeróbia de resíduos de caprinos em biodigestores modelo batelada com volume útil de 60 L de substrato em fermentação e mantidos sob temperatura ambiente. Foram avaliadas as produções de biogás, as reduções de sólidos voláteis (SV), os potenciais de produção (m³ de biogás/kg de substrato, de estrume, de sólidos totais (ST) ou sólidos voláteis), os números mais prováveis de coliformes totais e fecais, e a composição do biogás. As reduções de SV foram de 38; 34; 33 e 39% para o verão, outono, inverno e primavera, respectivamente. Os totais de biogás produzidos foram de 1,06 m³ no verão, 0,88 m³ no outono, 0,88 m³ no inverno e 0,99 m³ na primavera, e os potenciais de produção médios foram de 0,02 m³ de biogás/kg de substrato e 0,2 m³ de biogás/kg de estrume para todas as estações. As reduções médias de coliformes totais e fecais foram de 99,99% em todas as estações, e os teores máximos de CH4 no biogás foram 88,3; 84,6; 80,6 e 79,2%, para o verão, outono, inverno e primavera, respectivamente.

Parâmetros de dimensionamento para biodigestores batelada operados com dejetos de vacas leiteiras com e sem uso de inóculo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of sequence of insemination after simultaneous thawing of multiple semen straws on conception rate to timed AI in suckled multiparous Nelore cows

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estabilidade do antígeno de célula total de Brucella abortus para uso no diagnóstico sorológico da brucelose bovina pela reação de fixação de complemento

A reação de fixação de complemento é um dos testes usados no diagnóstico confirmatório da brucelose bovina, e para sua realização emprega-se o mesmo antígeno usado na prova de soroaglutinação lenta, porém não foi possível encontrar na literatura estudos sobre a estabilidade desse antígeno para uso na prova de fixação de complemento, de modo a estabelecer um prazo de validade para o mesmo. Por isso, esta investigação teve por objetivo avaliar a estabilidade do antígeno de célula total de Brucella conservado sob refrigeração, para uso na reação de fixação de complemento. Analisaram-se 14 partidas de antígeno, preparado com Brucella abortus amostra 1119/3 e padronizado para uso na prova de soroaglutinação lenta, com tempo de fabricação variando de 9 meses a 23 anos e 11 meses. Testaram-se 167 soros bovinos com títulos variáveis de anticorpos contra Brucella, adotando-se a técnica com incubação a 37ºC nas duas fases da reação e 5 unidades hemolíticas 50% de complemento. Considerou-se como positivo o soro com pelo menos 25% de fixação de complemento na diluição 1:4. Compararam-se os resultados obtidos com as 13 partidas de antígeno com aqueles obtidos com a partida com 9 meses de fabricação, usando o teste de chi2 de McNemar e o coeficiente kappa. A grande maioria dos soros apresentou resultados muito próximos quando testados com as diversas partidas de antígeno, e não se observou relação entre tempo de fabricação do antígeno e diferenças nos resultados obtidos.

Assessment of field fertility and several in vitro sperm characteristics following the use of different Angus sires in a timed-AI program with suckled Nelore cows

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Electrical conductivity test in the evaluation of physiological quality in seeds of Zeyheria tuberculosa

The electrical conductivity test is still an excellent tool to evaluate the effect of seeds of various forest and agricultural species and recent studies have been conducted aiming at verifying its application in forest seeds. The objective of this study was to establish a specific methodology to test the electrical conductivity of forest seeds of Zeyheria tuberculosis. Four lots of seeds were used, which were submitted to the germination test, evaluating the percentage of germination, germination speed index and dry mass of seedlings. For the electrical conductivity test, five replicates of 20 seeds installed in three volumes of deionized water (75, 100 and 125 mL) were used and eight periods for seed imbibitions (2, 4, 6, 12, 18, 24, 48 and 72 hour) at 25 degrees C were allowed. The statistical design used was completely random; the comparison of means was performed by Tukey test at 5 % probability. Lot II showed higher germination percentage and speed. The electrical conductivity test allows discrimination of the same batch by the germination test under laboratory conditions. It was possible to separate the seed lot presenting better physiological quality (lot II) from among the other lots. It was recommended the use of 75 or 125 mL of deionized water at a temperature of 25 degrees C to perform the electrical conductivity test.

Armazenamento refrigerado de abacates 'Hass'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Environmental effect on the occurrence of anti-Neospora caninum antibodies in pampas-deer (Ozotoceros bezoarticus)

Sera obtained from pampas-deer (Ozotoceros bezoarticus) captured in two different Brazilian environments were analyzed for the presence of anti-Neospora caninum antibodies by the indirect fluorescent antibody test (IFAT). Samples were collected from 23 animals from a savanna area in the National Park of Emas, in the state of Goias, Brazil. This area is surrounded by cultivated lands and allows very little contact between wild and domestic animals. Another batch of samples was collected from 16 animals from the Pantanal region, in the state of Mato Grosso, Brazil. This area is a flood plain where domestic animals have intensive contact with cervids. The 39 samples were analyzed (IFAT >= 1:50), and the values for the occurrences found in the animals from each region were compared by the test for comparison of two proportions. of the 39 cervids examined, 38.46% (15) had anti-N. caninum antibodies. Three (13%) of the 23 samples from the National Park of Emas. and 12 (75%) of the 16 samples from the Pantanal were positive, with significant differences between regions (p < 0.001). These results suggested that the presence of domestic animals, mainly dogs and cattle, may be responsible for the greater occurrence of N. caninum in the Pantanal cervids.Thus, as a recommendation of the Conservation Units that care for the pampas-deer, attention should be taken to carefully monitor the flow of diseases between the domestic animals and this species. (c) 2005 Elsevier B.V. All rights reserved.

Estratégias baseadas em aprendizado para coordenação de uma frota de robôs em tarefas cooperativas

In multi-robot systems, both control architecture and work strategy represent a challenge for researchers. It is important to have a robust architecture that can be easily adapted to requirement changes. It is also important that work strategy allows robots to complete tasks efficiently, considering that robots interact directly in environments with humans. In this context, this work explores two approaches for robot soccer team coordination for cooperative tasks development. Both approaches are based on a combination of imitation learning and reinforcement learning. Thus, in the first approach was developed a control architecture, a fuzzy inference engine for recognizing situations in robot soccer games, a software for narration of robot soccer games based on the inference engine and the implementation of learning by imitation from observation and analysis of others robotic teams. Moreover, state abstraction was efficiently implemented in reinforcement learning applied to the robot soccer standard problem. Finally, reinforcement learning was implemented in a form where actions are explored only in some states (for example, states where an specialist robot system used them) differently to the traditional form, where actions have to be tested in all states. In the second approach reinforcement learning was implemented with function approximation, for which an algorithm called RBF-Sarsa($lambda$) was created. In both approaches batch reinforcement learning algorithms were implemented and imitation learning was used as a seed for reinforcement learning. Moreover, learning from robotic teams controlled by humans was explored. The proposal in this work had revealed efficient in the robot soccer standard problem and, when implemented in other robotics systems, they will allow that these robotics systems can efficiently and effectively develop assigned tasks. These approaches will give high adaptation capabilities to requirements and environment changes.

Desgaste corrosivo-cavitativo-erosivo de um aço-carbono em meio aquoso com frações de sal (NaCl), CO2 e particulados sólidos (SiO2)

A batch of eighty-four coupons of low carbon steel were investigated at laboratory conditions under a corrosive, cavitative-corrosive (CO2) and corrosive-erosive (SiO2 + CO2) in an aqueous salt solution and two levels of temperature. The following measurements were made on Vickers (HV0,05, HV0,10, HV0,20) Microhardness tests at three levels of subsurface layer. A turbulent flow collided on the cylindrical sample, with and without mechanical stirring and gas bubbling, with and without fluid contamination by solid particles of SiO2, at two temperatures. Surface Roughness and Waviness, under two conditions "as received, after machining" and "after worn out", as well as gravimetric and electrochemical parameter were measured on the two opposite generatrices of each cylindrical sample, on the flow upstream (0°) and downstream (180°) by Profilometry, Mass Variation and Linear Polarization Resistance (LPR). The results of the Microhardness and Surface Texture of all coupons were subjected to statistical comparison, using the software Statgraphics® Centurion XVI, 95% statistical certainty, and significant differences were observed in some arrays of measurements. The corrosive wear rate measured by LPR and mass variation shown to be sensitive to the presence of bubbles and hydrodynamic fluctuations inside the cell, considering the temperature and contamination of corrosive fluid by solid particles. The main results of visual inspection relative to some topologies of the surface damages involving different mechanisms that were seen to give explanation for some fluctuations in wear rates of the steel experimentally investigated

Desenvolvimento e teste de um protótipo de reator de plasma com gaiola catódica rotatória para nitretação em lote de pequenas peças

The technique of ion nitriding, despite being fully consolidated in the industry, has great limitations when applied to the treatment of small parts. This is because effects that occur due to non-uniformity of the electric field, generate localized heating in parts, damaging the uniformity of nitrided layer. In addition, because the samples are treated static parts thereof are untreated. To expand the use of plasma nitriding, this work presents the development, assembly and testing of a prototype plasma reactor with rotatory cathodic cage [patent pending], able to meet these needs, giving the material a uniform treatment and opening doors to industrial scale production. The samples tested with hexagonal nuts are 6.0 mm in diameter, made of stainless steel AISI 304 nitrided at a pressure of 1 mbar in an atmosphere of 20% H2 + 80% N2 for 1 h. After treatment, testing visual inspection, optical microscopy and microhardness were carried out to check the effectiveness of the process for uniformity and hardness of the parts. All samples exhibited uniform color, and matte brownish, unlike the untreated samples, silver color and gloss. The hardness of the surface (top and sides) was 65% and even higher than the original hardness. The nitrided layer showed great uniformity in microstructure and thickness. It is concluded, therefore, that the unit was effective constructed for the purposes for which it was designed

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system