Levantamento de diferentes técnicas de controle de cupins subterrâneos (Isoptera, Rhinotermitidae) em áreas urbanas e rurais

Os cupins são conhecidos também como térmitas ou térmites, formam um grupo extenso e diverso e, atualmente, há mais de 2.800 espécies descritas que se distribuem em sete famílias. Pertencentes à ordem Isoptera, os térmitas são insetos eussociais que apresentam uma organização social altamente desenvolvida e vivem em ninhos denominados de cupinzeiros, geralmente, construídos no solo. Os cupinzeiros podem ser bem resistentes e estruturalmente complexos, e neles são encontrados indivíduos morfologicamente distintos adaptados a determinadas funções que constituem as diferentes castas (reprodutores, operários e soldados), além de indivíduos imaturos (“ninfas” e “larvas”) e ovos. A presença dos cupins nos ecossistemas é de extrema importância em diversos e diferentes processos. Em linhas gerais, os cupins são bastante importantes como decompositores de matéria orgânica fragmentando os detritos orgânicos, são mediadores da humificação, participam da ligação e formação de agregados e complexos minerais argilosos, e também atuam na fixação do nitrogênio, pois seus simbiontes têm a capacidade de fixar o gás nitrogênio da atmosfera, contribuindo, dessa forma, com a fertilidade do solo. Contudo, os cupins são bem conhecidos porque causam prejuízos enormes, ou seja, pelo potencial como pragas, danificando diversos tipos de materiais celulósicos e não celulósicos, além de edificações, monumentos, plantações, etc. Os cupins subterrâneos são os que causam maiores problemas, pois possuem grande capacidade de dispersão e são animais, que devido aos hábitos crípticos, têm o estudo e o controle dificultado. Além disso, estão entre os insetos mais abundantes, sendo a maioria pertencente à família Rhinotermitidae. O controle de cupins subterrâneos é um controle diferenciado, já que possuem o ninho sob o solo e com um grande número de indivíduos. A eliminação de uma parte da colônia muitas...

Estimativa da Radiação Solar em Presidente Prudente – SP nos anos de 1999-2007

The wide territorial extension of Brazil derails the installation and maintenance of instruments for measuring solar radiation, which makes necessary the development and application of models that are able to estimate reliable and sufficient data for many different activities that use such data. And these, in most cases, are estimated from the Ångström equation. Based on this model, this project aimed to estimate the global solar radiation at Presidente Prudente-SP, Brazil, using daily data from 1999 to 2007. The solar radiation data have been extracted from the paper tapes of actinograph bi-metallic (Robitsch) daily records at the meteorological station in the Faculty of Science and Technology, UNESP. These tapes were scanned, resulting in digital images with x and y coordinates pairs (x = time; y = solar radiation, cal/min.cm²). The daily global solar radiation is the area under the curve of the image. This value has been calculated by computer algorithms. After the acquisition and calculation of the values needed to develop the Ångström equation have been determined the constants a and b, using linear regression between the values of Rg/R0 (solar radiation/solar radiation on a horizontal surface at the top of atmosphere), as ordered, and n/N (number of hours of sunshine/day length in hours) as abscissa. The slope of the line will be the constant b and the linear coefficient, the constant a. The estimated results were compared to the observed using the Kolmogorov-Smirnov test, realizing that the models can be accepted. So, the equation to aim the solar global radiation is: Rg = R0 (0,2662+0,3592 n/N)

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Viabilidade de turbinas eólicas de pequeno porte no Brasil

Facing a global scenario where oil is scarce and the emission of CO2 in the atmosphere is a world concern, the search for new methods of energy production becomes the focus of all countries. Based on these assumptions, the wind power gains highlight and happen to be the most exploited around the world, since this does not produce toxic waste, since it uses the wind, no raw material shortage and its cost and efficiency are increasingly attractive. Taking advantage of the geographical features of Brazil, coastal and territorial extension, this study aims to analyze the feasibility of using wind turbines widely used in Germany, one of the countries with the highest production of energy through wind, in Brazil. In order to increase the energy production without causing more environmental impacts, geographical analyses will be made, and to determine the features and costs of production of this type of energy generation, and at the end of this dissertation, will finish for one of the turbines, Montana, is it feasible to install, however due to the Government's little incentive return is not very expressive. With respect to the turbine Passaat, this is infeasible to install under current conditions

Avaliação das taxas de erosão química da bacia hidrográfica do Ribeirão Monjolo Grande, Ipeúna (SP)

The development of human societies and their activities generate many impacts on the environment and natural resources. The consequence of these problems is a disturbance of the systemic dynamics of Planet Earth. Study these impacts are a way to understand the workings of this system and undertake efforts to prevent minimize and anticipate scenarios caused by environmental impacts. In this sense, from a systemic approach seeks to understand the way how is the interaction of the components of the ecosystems, adopting for this task the hydrographic basin as a natural unit of planning and management in view of the fact all landscape elements (atmosphere, hydrosphere, biosphere and geosphere) interact so that the reflections of human activities can be represented in this unit. Thus, this study aims to quantify chemical erosion rates in the hydrographic basin of Ribeirao Monjolo Grande, Ipeúna (SP), which is relevant to analyze the geomorphological characteristics of the area, which may serve to better exploitation of natural resources

Desenvolvimento de vasos digestores de amostra para microondas doméstico

The application of microwave radiation on the sample preparation has been expanding increasingly in areas involving decomposition by wet and dry roads, fusion, extraction, acceleration of chemical reactions, for example. Currently, the use of microwave ovens for analytical purposes are recognized for having excellent performance for organic and inorganic samples. In the international market there are several kinds of microwaves oven which adapt the varied purposes, however yet with elevated prices which incapacitate your use as routine equipment in laboratory. Thus, many researchers have been choosing for developing own projects of microwaves oven production or to use domestic oven for the laboratory, with or without adaptations. For the evaluation of the proposed method was used in the Kjeldahl methodology for determining total nitrogen in samples of crude protein, using a domestic microwave oven and a digester pot made up in TeflonTM and distillation by steam. Were made to adapt and characterization of a domestic microwave oven, the confeccion vessel digester and the metal support for the vessel. The accuracy of the proposed method was confirmed by comparison of two methods, the standard method for conventional heating and by the proposed method, with heating by microwave radiation through the calculated values of relative standard deviation analysis

Avaliação da toxicidade do dióxido de carbono no sistema nervoso de Apis mellifera (Hymenoptera, Apidae)

A concentração de dióxido de carbono (CO2) global eleva-se a cada ano, isso deve-se a um desequilíbrio entre as taxas de emissão deste gás por atividades antropogênicas e fontes naturais e a taxa que a biosfera e oceanos o removem da atmosfera. O CO2 é um importante constituinte químico do ambiente, pois este é um gás que aprisiona radiação infravermelha emitida pela superfície da Terra, contribuindo, assim, para a manutenção da temperatura global necessária a vida. As alterações na concentração de CO2 na atmosfera afetam inúmeros animais que dependem que estas estejam altamente controladas para poderem sobreviver. Em abelhas Apis mellifera valores elevados de temperatura ou níveis de CO2 dentro da colméia podem ter efeitos deletérios. Estes insetos são considerados bioindicadores naturais, pois apresentam diferenças fisiológicas conforme as condições do ambiente, sendo utilizadas na avaliação de efeitos a várias substâncias presentes no meio. Atualmente uma das técnicas utilizadas para a avaliação do efeito de estímulos externos é a utilização da marcação da proteína c-Fos através da expressão do gene c-fos, que indicam tanto a existência de atividade celular como também possibilita a identificação de áreas cerebrais determinadas. Esta proteína foi utilizada com o intuído de verificar se concentrações elevadas de gás carbônico são capazes de alterar as funções cerebrais da abelha Apis mellifera, comprometendo sua atividade de orientação e, conseqüentemente seu forrageamento. Marcações positivas à proteína Fos foram observadas nas regiões dos lobos ópticos e ocelos tanto do grupo controle quanto dos grupos Resumo Jacob, C. R. O. 9 expostos ao gás dióxido de carbono para todas as idades coletadas, estes resultados estão relacionados com a...(Resumo completo, clicar acesso eletrônico abaixo)

Auditoria energética em caldeira de monóxido de carbono

Within the concepts of sustainability, energy audit magnified its importance in managing systems in industrial plants. Can reduce waste and save energy representative, the improvement and development of thermal and electrical systems can be very attractive to business. With the focus on a boiler generating steam, the energy audit aimed to increase efficiency and eliminate energy losses of the heat engine. The boiler in question is commonly called CO boiler because most of the calorific power provided comes from this. Using a fuel gas from the catalyst regeneration process, it has featured in the boiler power generation system of the refinery. Burning a mixture of gaseous components from discarded into the atmosphere, the heat engine can generate tons of steam just as the other boilers installed. The challenge was to work with this gas mixture and obtain maximum efficiency, reduce moisture and enjoy the warmth of the heat exchange have been studied and recommended. Every project, from evaluation of the variables in the composition of fuel gas, to the using of heat exchangers and refrigeration system are suitable for evaluation and improvements

Atenção farmacêutica: adesão ao tratamento

O trabalho se baseia em uma revisão bibliográfica de trabalhos da literatura que abordam o tema adesão ao tratamento medicamentoso. Segundo a Organização Mundial da Saúde, a efetividade do tratamento é caracterizada pela relação estabelecida em uma atmosfera na qual as alternativas terapêuticas são exploradas, o regime terapêutico é negociado, a adesão é discutida e o acompanhamento planejado. Para a manutenção da adesão ao tratamento, o paciente precisa ser esclarecido e auxiliado quanto suas próprias decisões. Além disso, é imprescindível entender as características do indivíduo, do processo de atendimento à saúde e de aspectos referentes aos elementos envolvidos. Portanto, faz-se necessário o conhecimento do farmacêutico sobre a importância da realização de intervenções personalizadas e com divisões de responsabilidades, que juntamente com a mudança de comportamento do profissional de saúde e com a existência de um sistema de saúde que garanta o acesso aos recursos terapêuticos irão contribuir para o aumento da adesão. Neste trabalho, a adesão ao tratamento em doenças crônicas tais como diabetes, epilepsia, hipertensão, tuberculose, e HIV/AIDS é avaliada, assim como as possíveis intervenções que visam o aumento da adesão e, consequentemente, proporcionam uma melhor qualidade de vida para o paciente.

Estudo e seleção de um aparelho de ar condicionado para ônibus

The study and selection of an equipment of air conditioner for any type of environment, should be made without overestimate or undersizing the project. The undersizing does not provide an adequate comfort temperature if the environment is too hot because the air conditioner does not remove all the heat necessary in the environment. But if the project is oversized, energy consumption is higher and there is an unnecessary cost. To prevent these failures is necessary to make a calculation of the thermal load on the environment and choose the equipment that has a higher cooling capacity than the calculated heat load and closer to the calculated heat load. In this graduate work will be chosen an air-conditioned equipment for bus, showing the calculations made for the thermal load for various types of heat gain in this type of vehicle. The thermal load on vehicles is more complicated to calculate than in areas because there are several factors that vary with the movement of the vehicle. It will also explain the compression refrigeration cycle, which is the cooling system used in vehicles because it is weightless, compact and lower cost. From the calculated heat load, it will be chosen an air conditioner that best suits the project and, finally, a brief presentation of the selected equipment will be made

Análise de ocorrências dos impactos pluviais na área urbana de Rio Claro (SP)

The Urbanization is a notable process in our society, being part of it since around 3500 BC in Mesopotamia, currently Iraq area. Since the Industrial Revolution, cities had a significant increase in their growth and began to concentrate increasingly labor and capital. Brazil, despite having had a late industrialization, also had a high population growth in cities, especially in the XVIII century, which were not provided with any kind of planning that targets the ordering and implementation of the urban essential apparatus. Therefore, Brazilian cities started to exhibit countless structural and environmental problems. Associated with inadequate infrastructure, the modifications in the urban atmosphere, like increased heat, air pollution and increased rainfall and storm frequency, cause different types of impacts in cities. Among the most worrisome are those from the intense rain, which cause human and material damage. The city of Rio Claro (SP) can be considered an example of this reality. Thereby, the objective of this study was to analyze the impacts on the population originated from rainfall in the urban area during the period 2005-2010, by the mapping of events and analysis of the active atmospheric systems. The information of the events were collected in the Fire Department and the Press and the synoptic maps were obtained in the library of INPE, in Cachoeira Paulista (SP) and in the site of the Navy of Brazil. The data showed that among 247 occurrences, during the six years, 233 occurred in the spring-summer period. Moreover, after finalizing the maps, it was found the locations considered critical regarding the frequency of occurrences, as: Visconde do Rio Claro Avenue and central area of the city, both with a total of 23 occurrences; Jardim Inocoop, with 20; Tancredo Neves Avenue, with 12 and Vila Paulista, with 10 occurrences. Through the graphs, it was found that the most recurrent atmospheric system, during the studied period, is...

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Extração de isosuperfícies a partir de dados meteorológicos

This work aims viewing weather information, by building isosurfaces enabling enjoy the advantages of three-dimensional geometric models, to communicate the meaning of the data used in a clear and efficient way. The evolving technology of data processing makes possible the interpretation of masses of data increasing, through robust algorithms. In meteorology, in particular, we can benefit from this fact, due to the large amount of data required for analysis and statistics. The manipulation of data, by users from other areas, is facilitated by the choice of algorithm and the tools involved in this work. The project was further developed into distinct modules, increasing their flexibility and reusability for future studies

Redução de consumo de energia eletrica a partir de reaproveitamento de energia termica com uso de ciclo rankine orgânico

This paper is proposed the usage of an Organic Rankine Cycle (ORC) along with waste heat recovery from an inconstant heat source. This method of waste heat recovery with intermittent heat source is part of a technical viability study. This paper also brings up the usage of thermal energy storage as heat source for the ORC. This paper is based on a heat treatment company study in which a natural gas furnace is explored. Data such as mass flow, temperature and specific waste gas heat from this furnace are used through calculations. Calculations are made also based on furnace cycles. This viability study considers a series of working fluids such as ammonia, benzene, R113 and R134a. Results point out that ORC with out thermal storage and using refrigerant fluid ammonia is the best alternative