A supply network configuration perspective on international supply chain development

Purpose - The purpose of this paper is to explore the impact of configuration on supply network capability. It was believed that a configuration perspective might provide new insights on the capability and performance of supply networks, a gap in the literature, and provide a basis for the development of tools to aid their analysis and design. Design/methodology/ approach - The methodology involved the development of a configuration definition and mapping approach extending established strategic and firm level constructs to the network operational level. The resulting tools were tested and refined in a series of case studies across a range of sectors and value chain models. Supply network capability assessments, from the perspective of the focal firm, were then compared with their configuration profiles. Findings - The configuration mapping tools were found to give new insights into the structure of supply networks and allow comparisons to be made across sectors and business models through the use of consistent and quantitative methods and common presentation. They provide the foundations for linking configuration to capability and performance, and contribute to supply network design and development by highlighting the intrinsic capabilities associated with different configurations. Research limitations/implications - Although multiple case networks have been investigated, the configuration exemplars remain suggestive models. The research suggests that a re-evaluation of operational process excellence models is needed, where the link between process maturity and performance may require a configuration context. Practical implications - Advantages of particular configurations have been identified with implications for supply network development and industrial policy. Originality/value - The paper seeks to develop established strategic management configuration concepts to the analysis and design of supply networks by providing a robust operational definition of supply network configuration and novel tools for their mapping and assessment. © Emerald Group Publishing Limited.

Effects of gamma radiation on nutritional and microbial quality of Pampus chinensis (Euphrasen 1788)

To evaluate the efficiency of gamma radiation in combination with low temperature Chinese pomfret, Pampus chinensis were preserved by the treatment of different doses of gamma radiation (3, 5 and 8 KGy) at freezing temperature (-20°C) during 90 days of storage period. Quality assessments for fish were carried out at an interval of 15 days during the storage period. Quality assessments were done by organoleptic, chemical (Total Volatile Nitrogen, TVN and Trimethylamine, TMA) and microbiological (Total Bacterial Count, TBC and Total Mould Count, TMC) evaluation. From the analysis of all parameters, maximum shelf-life was observed for irradiated (8 KGy) sample. It remained acceptable up to 75 days and that was the highest duration among 4 types of samples.

Quality assessment of traditional, rotary and solar tunnel dried small indigenous fish species products

Studies on the quality assessments of three traditional, rotary and solar tunnel dried SIS products were conducted. Organoleptic quality of traditional dried SIS products available in the markets was poor compared to those produced in rotary and solar tunnel dryer. Reconstitution of samples were in the range of 54.26% to 75.24%, 69.37% to 83.73% and 55.08% to 80.24% when soaked at 80°C for traditional, rotary and solar tunnel dried products, respectively. The percentage of reconstitution increased with the increase of soaking time and the uptake of water was maximum after 60 min of soaking. The moisture contents of traditional, rotary and solar tunnel dried products were in the range of 26.02% to 27.33%, 16.23% to 22.84% and 13.71% to 19.30%, respectively. The protein contents were in the range of 60.78% to 72.59%, 62.17% to 76.27% and 61.11% to 76.00%, respectively; lipid contents were in the range of 12.26% to 22.60%, 14.00% to 24.71% and 13.92% to 22.39%, respectively and ash contents in the range of 15.11% to 16.59%, 8.32% to 13.51% and 8.71% to 16.45%, respectively on dry matter basis. The TVB-N content of rotary and solar tunnel dried products was low compared to traditional one ranging from 10.64 to 17.52 mg/100g and 14.34 to 15.68 mg/100g, respectively whereas the TVB-N content of traditional samples was in the range of 15.46 to 20.36 mg/100g. The bacterial load of traditional, rotary and solar tunnel dried products were in the range of 1.43x10 super(8) CFU/g to 2.89 x10 super(80 CFU/g, 1.91x10 super(8) CFU/g to 2.84x10 super(8) CFU/g and 1.95x10 super(8) CFU/g to 2.59x10 super(8) CFU/g, respectively. The results of the study indicated that dried fish products from rotary dryer and solar tunnel dryer were found to be of better quality in nutritional and food quality aspects than those of traditional dried products.

Report of the BOBLME Fisheries Assessment Working Group meetings, Bangkok, Thailand, 13-14 September, 2010 & Chennai, India 25 November, 2010

Review of available data and assessments for Hilsa (Tenulaosa ilisha) and Indian Mackerel (Rastrelliger kanagurta). Identification of future assessment approaches and data needs and stock status advice.

Microbiological quality study of Macrobrachium rosenbergii (de Man 1879) during storage at -20°C temperature

The shelf life of fresh water prawn Macrobrachium rosenbergii by applying low temperature was investigated. M. rosenbergii preserved at -20°C was subjected for quality assessment before storage and at 15, 30, 45, and 90 days of storage period. The quality assessments as done microbiological viz. total bacterial count (TBC), total mould count (TMC), total yeast count (TYC), total coliform count (TCC) and salmonella count. All the samples were acceptable during 90 days because the upper limit of all spoilage indicator was not exceeding within the experimental time period.

Monitoring and evaluation of management effectiveness for adaptive management of MPAs in Indonesia's BOBLME area

Subcomponent 3.2 Marine Protected Areas in the conservation of regional fish stocks "Provision of Services Relating to the Assessment and Planning of Effective Management of two MPAs in Sumatra Coast, Indonesia". Assessments of management effectiveness of two Marine Protected Areas (MPAs) in Pulau Pieh National Park and Sabang District, Sumatra, were conducted through two separate workshops. Recommendations were made and future needs identified.

Determination of bioaccumulation and microscopic survey of LAS pollutant effect on the liver, kidney and gill tissues of Rutilus frisii kutum in Caspian sea

Linear alkylbenzene sulfonate (LAS) are widely used in detergent industry. Due to contaminants entering the water, and the effects of their accumulation in fish, LAS, has a great importance in environmental pollution. In the present study, accumulation of LAS and its histological effects on gill tissue, liver and kidney of Caspian kutum (Rutilus frisii kutum) were studied. Caspian kutum is the most important and most valuable teleosts of the Caspian Sea. Due to releasing Caspian Kutum in rivers and Anzali Lagoon and unlimited entry of wastewater to the aquatic ecosystem, research on the impact of LAS on Caspian kutum is important. In the present study, fish exposed to sublethal concentrations of LAS (0.58, 1.16 and 2.32 mg/l) for 192 hours. Control treatments with three replicates at 0, 24, 48, 72, 96 and 192 hours were done. For assessments of the histological effects of LAS, tissue sections prepared and by using Hematoxylin - Eosin were stained, then the prepared sections, examined by light microscopy. For determination of the bio accumulation of LAS, the soxhlet extraction and solid phase extraction was performed to determine the amount of LAS using HPLC with fluorescence detector. According to results average of bioconcentration factor and LAS concentrations in fish had reached stable levels after approximately 72 h and thus represented steady state BCF values in this species. The value of steady-state bio-concentration factor of total LAS was 33.96 L.Kg- 1 and for each of the homologous C10-n-LAS, C11-n-LAS, C12-n-LAS and C13-n- LAS were 3.84, 6.15, 8.58 and 15.57 L.Kg-1 respectively. According to the results obtained in gills exposed to LAS, histopathological alteration include hypertrophy, lifting of lamella epithelium, edema, clubbing of lamellae hyperplasia, lamellar fusion and aneurysm were seen. In liver tissue exposed to three concentrations of LAS, congestion and dilation of sinusoids, irregular-shaped nuclei and degeneration in the hepatocyte, vacuolar degeneration and necrosis were observed. In kidney exposed to three concentrations of LAS, reduction of the interstitial haematopoietic tissue, degeneration in the epithelial cells of renal tubule, tubular degeneration, necrosis, shrinkage and luminal occlusion were observed. According to the results the most alteration due to exposure to LAS was seen in the gill tissue. None of the control samples showed histological effects of LAS.

Report of the Training Workshop on MPA Management Effectiveness Assessment Tool, Dhaka, Bangladesh, 27 and 29 April, 2015

Objectives of the workshop included; introduction to various Marine Protected Area (MPA) tools with a focus on Management Effectiveness Assessment Tool (MEAT); report on selected MPAs in Bangladesh; undertake initial assessments using MEAT; and develop workplans for other MPAs

Aquatic ecology monitoring: water quality, fish, fish catch, sanitation and disease vectors: monitoring no.12, 25th-30th April 2013

Bujagali hydropower dam construction is now completed and a reservoir behind the dam has been created, extending all the way up to Kalange-Makwanzi, an upstream transects. During the 10th monitoring survey-April 2012, a third transect was established in the mid of the reservoir where it runs up to 30 m deep and sampled similarly as at the two original sampling transects, Kalange-Makwanzi and Buyala-Kikubamutwe for comparative purposes. This monitoring survey No. 12 undertaken between 25th and 30th April 2013 is the third one to be conducted after completion of construction of Bujagali Hydropower Dam. Two pre-construction baseline surveys in April 2000 and April 2006 were conducted and during construction phase, eight monitoring surveys (September 2007, April 2008, April 2009, October 2009, April 2010, September 2010, April 2011, September 2011) were conducted. Since 2009 biannual monitoring surveys have been conducted at an upstream and a downstream transect of the BHPP with emphasis on the following aspects: water quality determinants, biology and ecology of fishes and food webs, fish stock and fish catch including economic aspects of catch and sanitation/vector studies (bilharzias and river blindness). In the post-construction monitoring surveys, the assessments of algae, zooplankton and benthic macro-invertebrates which had been restrained since April 2008 were also included.

The commercial fishery of Lake George, Uganda (East Africa)

A shallow, highly productive, tropical lake is descrihed with a brief history of its commercial fishery. Three separate assessments of the present (1967-1970) yield are compared, with an apparent confirmation of the values derived from Fishery Department statistics over a period of 20 years. The seasonal change in the catch is noted with, an apparent anomaly shown by ohservations of canoe landings. Long-term trends during the period 1950-1969 are considered with a brief discussion of possible future trends in the fishery.

The Bayesian view of extreme events

The Bayesian perspective of designing for the consequences of hazard is discussed. Structural engineers should be educated in Bayesian theory and its underlying philosophy, and about the centrality to the prediction problem of the predictive distribution. The primary contribution that Bayesianism can make to the debate about extreme possibilities is its clarification of the language of and thinking about risk. Frequentist methodologies are the wrong approach to the decisions that engineers need to make, decisions that involve assessments of abstract future possibilities based on incomplete and abstract information.

Disentangling the Complexity of Early-Stage Technology Acquisitions

While tools have been developed to assist firms' decision making for bringing known products and components into the supply chain, fewer tools are available to guide the acquisition of earlier-stage technologies, which is a riskier proposition due to higher technological and market uncertainties. Through synthesis of literature in technology sourcing, open innovation, alliances, mergers and acquisitions, outsourcing, and technology and knowledge transfer and consultation with industry, this paper identifies critical issues that decision makers should consider before making an early-stage technology acquisition. Sixteen questions emerge to guide decision making, comprising internal, technology, and partner assessments. These questions allow a firm to disentangle the complexity of early-stage technology acquisitions and select the most appropriate targets.

Detecting air pockets for architectural concrete quality assessment using visual sensing

Air pockets, one kind of concrete surface defects, are often created on formed concrete surfaces during concrete construction. Their existence undermines the desired appearance and visual uniformity of architectural concrete. Therefore, measuring the impact of air pockets on the concrete surface in the form of air pockets is vital in assessing the quality of architectural concrete. Traditionally, such measurements are mainly based on in-situ manual inspections, the results of which are subjective and heavily dependent on the inspectors’ own criteria and experience. Often, inspectors may make different assessments even when inspecting the same concrete surface. In addition, the need for experienced inspectors costs owners or general contractors more in inspection fees. To alleviate these problems, this paper presents a methodology that can measure air pockets quantitatively and automatically. In order to achieve this goal, a high contrast, scaled image of a concrete surface is acquired from a fixed distance range and then a spot filter is used to accurately detect air pockets with the help of an image pyramid. The properties of air pockets (the number, the size, and the occupation area of air pockets) are subsequently calculated. These properties are used to quantify the impact of air pockets on the architectural concrete surface. The methodology is implemented in a C++ based prototype and tested on a database of concrete surface images. Comparisons with manual tests validated its measuring accuracy. As a result, the methodology presented in this paper can increase the reliability of concrete surface quality assessment

Machine Vision Enhanced Post-Earthquake Inspection and Rapid Loss Estimation

Manual inspection is required to determine the condition of damaged buildings after an earthquake. The lack of available inspectors, when combined with the large volume of inspection work, makes such inspection subjective and time-consuming. Completing the required inspection takes weeks to complete, which has adverse economic and societal impacts on the affected population. This paper proposes an automated framework for rapid post-earthquake building evaluation. Under the framework, the visible damage (cracks and buckling) inflicted on concrete columns is first detected. The damage properties are then measured in relation to the column's dimensions and orientation, so that the column's load bearing capacity can be approximated as a damage index. The column damage index supplemented with other building information (e.g. structural type and columns arrangement) is then used to query fragility curves of similar buildings, constructed from the analyses of existing and on-going experimental data. The query estimates the probability of the building being in different damage states. The framework is expected to automate the collection of building damage data, to provide a quantitative assessment of the building damage state, and to estimate the vulnerability of the building to collapse in the event of an aftershock. Videos and manual assessments of structures after the 2009 earthquake in Haiti are used to test the parts of the framework.

The flow of steel into the construction sector

Half of the world's annual production of steel is used in constructing buildings and infrastructure. Producing this steel causes significant amounts of carbon dioxide to be released into the atmosphere. Climate change experts recommend this amount be halved by 2050; however steel demand is predicted to have doubled by this date. As process efficiency improvements will not reach the required 75% reduction in emissions per unit steel output, new methods must be examined to deliver service using less steel production. To apply such methods successfully to construction, it must first be known where steel is used currently within the industry. This information is not available so a methodology is proposed to estimate it from known data. Results are presented for steel flows by product for ten construction sectors for both the UK and the world in 2006. An estimate for steel use within a 'typical' building is also published for the first time. Industrial buildings and utility infrastructure are identified as the largest end-uses of steel, while superstructure is confirmed as the main use of steel in a building. The results highlight discrepancies in previous steel estimates and life-cycle assessments, and will inform future research on lowering demand for steel, hence reducing carbon emissions. © 2012 Elsevier B.V. All rights reserved.