The impacts and management of foxes Vulpes vulpes in Australia

1. The successful introduction of the red fox Vulpes vulpes into Australia in the 1870s has had dramatic and deleterious impacts on both native fauna and agricultural production. Historical accounts detail how the arrival of foxes in many areas coincided with the local demise of native fauna. Recent analyses suggest that native fauna can be successfully reintroduced to their former ranges only if foxes have been controlled, and several replicated removal experiments have confirmed that foxes are the major agents of extirpation of native fauna. Predation is the primary cause of losses, but competition and transmission of disease may be important for some species. 2. In agricultural landscapes, fox predation on lambs can cause losses of 1–30%; variation is due to flock size, health and management, as well as differences in the timing and duration of lambing and the density of foxes. 3. Fox control measures include trapping, shooting, den fumigation and exclusion fencing; baiting using the toxin 1080 is the most commonly employed method. Depending on the baiting strategy, habitat and area covered, baiting can reduce fox activity by 50–97%. We review patterns of baiting in a large sheep-grazing region in central New South Wales, and propose guidelines to increase landholder awareness of baiting strategies, to concentrate and coordinate bait use, and to maximize the cost-effectiveness of baiting programs. 4. The variable reduction in fox density within the baited area, together with the ability of the fox to recolonize rapidly, suggest that current baiting practices in eastern Australia are often ineffective, and that reforms are required. These might include increasing landholder awareness and involvement in group control programs, and the use of more efficient broadscale techniques, such as aerial baiting.

Efficacy of herbicides on weedy Sporobolus grasses in the glasshouse in Australia

Twenty three herbicides including the current registered herbicides were screened for activity on pre-emergent, juvenile and mature plants of the weedy Sporobolus grass species Sporobolus pyramidalis P.Beauv. and Sporobolus fertilis (Steud.) Clayton. No new herbicides trialled effectively controlled mature plants. Propaquizafop, fluazifop-P-hutyI, flupropanate, haloxyfop-R-methyl ester, glyphosate-ipa and clethodim + haloxyfop-R-methyl ester mix showed good activity on juvenile plants while atrazine, flupropanate, dithiopyr and imazapyr where effective as pre-emergent herbicides. Further work needs to be done to define the recommended application rates for juvenile and pre-emergent plant stages and to determine the selectivity of these herbicides on native and exotic pasture grasses.

Sapindaceae production and research in Australia.

Australia has an abundance of native Sapindaceae, with a few species that are considered to have an edible aril. A number of these have minor 'bush food' status but have limited commercial potential. Longan, lychee and rambutan were introduced into Australia from the mid 1800s. Serious commercialization of these crops began from the 1970s when farmers in sub-tropical and tropical regions of Australia were seeking new commercial horticultural opportunities. Currently the value of these industries is in the vicinity of $35 M with lychee the predominate crop followed by longan and rambutan respectively. Despite Australia being a minor producer on the world scale it has contributed significantly to the scientific and production developments through the combined efforts of researchers and innovative growers. This paper details the development and status of the commercial Sapindaceae in Australia and highlights production and research activities.

Characterization of commercial cultivars and naturalized genotypes of Stenotaphrum secundatum (Walter) Kuntze in Australia

Stenotaphrum secundatum (Walter) Kuntze, known as "St Augustinegrass" in the USA and "buffalo grass" in Australia, is a widely used turfgrass species in subtropical and warm temperate regions of the world. Throughout its range, S. secundatum encompasses a great deal of genetic diversity, which can be exploited in future breeding programs. To understand better the range of genetic variation in Australia, morphological-agronomic classification and DNA profiling were used to characterize and group 17 commercial cultivars and 18 naturalized genotypes collected from across Australia. Historically, there have been two main sources of S. secundatum in Austalia: one a reputedly sterile triploid race (the so-called Cape deme) from South Africa now represented by the Australian Common group naturalized in all Australian states; and the other a "normal" fertile diploid race naturalized north from Sydney along the NSW coast, which is referred to here as the Australian Commercial group because it has been the source of most of the new cultivars recently developed in Australia. Over the past 30 years, some US cultivars have also been introduced and commercialized; these are again "normal" fertile diploids, but from a group distinclty different from the Australian Commercial genotypes as shown by both DNA analysis and grouping based on 28 morphological-agronomic characteristics. The implications for future breeding within S. secundatum in Australia are discussed.

Introduction and establishment of Carvalhotingis visenda (Hemiptera: Tingidae) as a biological control agent for cat's claw creeper Macfadyena unguis-cati (Bignoniaceae) in Australia

Carvalhotingis visenda (Hemiptera: Tingidae) is the first biological control agent approved for release against cat’s claw creeper Macfadyena unguis-cati (Bignoniaceae) in Australia. The mass-rearing and field releases of C. visenda commenced in May 2007 and since then more than half a million individuals have been released at 72 sites in Queensland and New South Wales. In addition, community groups have released over 11,000 tingid-infested potted cat’s claw creeper plants at 63 sites in Queensland. Establishment of C. visenda was evident at 80% of the release sites after three years. The tingid established on the two morphologically distinct ‘long-pod’ and ‘short-pod’ cat’s claw creeper varieties present in Australia. Establishment was more at sites that received three or more field releases (83%) than at sites that received two or less releases (73%); and also at sites that received more than 5000 individuals (82%) than at sites that received less than 5000 individuals (68%). In the field, the tingid spread slowly (5.4 m per year), and the maximum distance of C. visenda incidence away from the initial release points ranged from 6 m to approximately 1 km.

Preference and performance of Aconophora compressa Walker (Hemiptera: Membracidae) on different lantana phenotypes in Australia

The plant phenotypic preference and performance of Aconophora compressa, a biocontrol agent for Lantana camara in Australia, were assessed. Overall, there were no significant trends of A. compressa favouring any one particular phenotype. However, there was a gradual decrease in performance through subsequent generations, with populations of A. compressa dying out on two phenotypes. Females did not show preference for any particular lantana phenotype, ovipositing similarly on all five phenotypes presented in choice trials and all 16 phenotypes in no-choice trials. Nymphs developed on all 16 phenotypes tested. Percent development and time to complete development were not significant in the first generation but were significant in the second generation. There was a general decrease in performance with generation. However, this was probably due to rising temperatures with season rather than an effect of phenotype. These results suggest that A. compressa should establish on all phenotypes within its geographic range.

Quambalaria species: increasing threat to eucalypt plantations in Australia

Spotted gum (Corymbia citriodora subsp. variegata and C. maculata) is a valuable source of commercial timber and suitable for a wide range of different soil types in eastern Australia. The main biological constraint to further expansion of spotted gum plantations is Quambalaria shoot blight caused by the fungus Quambalaria pitereka. Surveys conducted to evaluate the impact of Quambalaria shoot blight have shown that the disease is present in all spotted gum plantations and on a range of Corymbia species and hybrids in subtropical and tropical regions surveyed in eastern Australia. More recently, Q. eucalypti has also been identified from a range of Eucalyptus species in these regions. Both pathogens have also been found associated with foliage blight and die-back of amenity trees and Q. pitereka in native stands of Corymbia species, which is the probable initial infection source for plantations. Infection by Q. pitereka commonly results in the repeated destruction of the growing tips and the subsequent formation of a bushy crown or death of trees in severe cases. In comparison, Q. eucalypti causes small, limited lesions and has in some cases been associated with insect feeding. It has not been recorded as causing severe shoot and stem blight. A better understanding of factors influencing disease development and host-pathogen interactions is essential in the development of a disease management strategy for these poorly understood but important pathogens in the rapidly expanding eucalypt (Corymbia and Eucalyptus spp.) plantation industry in subtropical and tropical eastern Australia.

MOE and MOR assessment technologies for improving graded recovery of exotic pines in Australia.

This project was designed to provide the structural softwood processing industry with the basis for improved green and dry grading to allow maximise MGP grade yields, consistent product performance and reduced processing costs. To achieve this, advanced statistical techniques were used in conjunction with state-of-the-art property measurement systems. Specifically, the project aimed to make two significant steps forward for the Australian structural softwood industry: • assessment of technologies, both existing and novel, that may lead to selection of a consistent, reliable and accurate device for the log yard and green mill. The purpose is to more accurately identify and reject material that will not make a minimum grade of MGP10 downstream; • improved correlation of grading MOE and MOR parameters in the dry mill using new analytical methods and a combination of devices. The three populations tested were stiffness-limited radiata pine, strength-limited radiata pine and Caribbean pine. Resonance tests were conducted on logs prior to sawmilling, and on boards. Raw data from existing in-line systems were captured for the green and dry boards. The dataset was analysed using classical and advanced statistical tools to provide correlations between data sets and to develop efficient strength and stiffness prediction equations. Stiffness and strength prediction algorithms were developed from raw and combined parameters. Parameters were analysed for comparison of prediction capabilities using in-line parameters, off-line parameters and a combination of in-line and off-line parameters. The results show that acoustic resonance techniques have potential for log assessment, to sort for low stiffness and/or low strength, depending on the resource. From the log measurements, a strong correlation was found between the average static MOE of the dried boards within a log and the predicted value. These results have application in segregating logs into structural and non-structural uses. Some commercial technologies are already available for this application such as Hitman LG640. For green boards it was found that in-line and laboratory acoustic devices can provide a good prediction of dry static MOE and moderate prediction for MOR.There is high potential for segregating boards at this stage of processing. Grading after the log breakdown can improve significantly the effectiveness of the mill. Subsequently, reductions in non-structural volumes can be achieved. Depending on the resource it can be expected that a 5 to 8 % reduction in non structural boards won’t be dried with an associated saving of $70 to 85/m3. For dry boards, vibration and a standard Metriguard CLT/HCLT provided a similar level of prediction on stiffness limited resource. However, Metriguard provides a better strength prediction in strength limited resources (due to this equipment’s ability to measure local characteristics). The combination of grading equipment specifically for stiffness related predictors (Metriguard or vibration) with defect detection systems (optical or X-ray scanner) provides a higher level of prediction, especially for MOR. Several commercial technologies are already available for acoustic grading on board such those from Microtec, Luxscan, Falcon engineering or Dynalyse AB for example. Differing combinations of equipment, and their strategic location within the processing chain, can dramatically improve the efficiency of the mill, the level of which will vary depending of the resource. For example, an initial acoustic sorting on green boards combined with an optical scanner associated with an acoustic system for grading dry board can result in a large reduction of the proportion of low value low non-structural produced. The application of classical MLR on several predictors proved to be effective, in particular for MOR predictions. However, the usage of a modern statistics approach(chemometrics tools) such as PLS proved to be more efficient for improving the level of prediction. Compared to existing technologies, the results of the project indicate a good improvement potential for grading in the green mill, ahead of kiln drying and subsequent cost-adding processes. The next stage is the development and refinement of systems for this purpose.

Two novel mastreviruses from chickpea (Cicer arietinum) in Australia

Two novel mastreviruses (genus Mastrevirus; family Geminiviridae), with proposed names chickpea chlorosis virus (CpCV) and chickpea redleaf virus, are described from chickpea (Cicer arietinum) from eastern Australia. The viruses have genomes of 2,582 and 2,605 nucleotides, respectively, and share similar features and organisation with typical dicot-infecting mastreviruses. Two distinct strains of CpCV were suggested by phylogenetic analysis. Additionally, a partial mastrevirus Rep sequence from turnip weed (Rapistrum rugosum) indicated the presence of a distinct strain of Tobacco yellow dwarf virus (TYDV). In phylogenetic analyses, isolates of Bean yellow dwarf virus, Chickpea chlorotic dwarf Pakistan virus and Chickpea chlorotic dwarf Sudan virus from southern and northern Africa and south-central and western Asia clustered separately from these three viruses from Australia. An Australian, eastern Asian, or south-eastern Asian origin for the novel mastreviruses and TYDV is discussed.

Principles to guide sustainable implementation of extended-scope-of-practice physiotherapy workforce redesign initiatives in Australia: Stakeholder perspectives, barriers, supports, and incentives

Sustainable implementation of new workforce redesign initiatives requires strategies that minimize barriers and optimize supports. Such strategies could be provided by a set of guiding principles. A broad understanding of the concerns of all the key stakeholder groups is required before effective strategies and initiatives are developed. Many new workforce redesign initiatives are not underpinned by prior planning, and this threatens their uptake and sustainability. This study reports on a cross-sectional qualitative study that sought the perspectives of representatives of key stakeholders in a new workforce redesign initiative (extended-scope-of-practice physiotherapy) in one Australian tertiary hospital. The key stakeholder groups were those that had been involved in some way in the development, management, training, funding, and/or delivery of the initiative. Data were collected using semistructured questions, answered individually by interview or in writing. Responses were themed collaboratively, using descriptive analysis. Key identified themes comprised: the importance of service marketing; proactively addressing barriers; using readily understood nomenclature; demonstrating service quality and safety, monitoring adverse events, measuring health and cost outcomes; legislative issues; registration; promoting viable career pathways; developing, accrediting, and delivering a curriculum supporting physiotherapists to work outside of the usual scope; and progression from "a good idea" to established service. Health care facilities planning to implement new workforce initiatives that extend scope of usual practice should consider these issues before instigating workforce/model of care changes. © 2014 Morris et al.

Attributes of clinical role models as described by senior veterinary students in Australia

Role models incite admiration and provide inspiration, contributing to learning as students aspire to emulate their example. The attributes of physician role models for medical trainees are well documented, but they remain largely unexplored in the context of veterinary medical training. The aim of the current study was to describe the attributes that final-year veterinary students (N=213) at the University of Queensland identified when reflecting on their clinical role models. Clinical role model descriptions provided by students were analyzed using concept-mapping software (Leximancer v. 2.25). The most frequent and highly connected concepts used by students when describing their role model(s) included clients, vet, and animal. Role models were described as good communicators who were skilled at managing relationships with clients, patients, and staff. They had exemplary knowledge, skills, and abilities, and they were methodical and conducted well-structured consultations. They were well respected and, in turn, demonstrated respect for clients, colleagues, staff, and students alike. They were also good teachers and able to tailor explanations to suit both clients and students. Findings from this study may serve to assist with faculty development and as a basis for further research in this area.

Non-medical prescribing in Australia

The announcement in the 2009 federal budget to allow nurse practitioners and midwives access to the Pharmaceutical Benefits Scheme (PBS) and the Medicare Benefits Scheme,1and the subsequent announcement of a November 2010 start date,2has brought non-medical prescribing into the public arena. Non-medical prescribing is not a new concept in Australia as nurse practitioners, podiatrists and optometrists have been authorised to prescribe under various state legislations for some time. However, state legislation is not uniform in relation to authorisation or formulary. Midwives are currently seeking prescribing rights,3and other groups such as physiotherapists and pharmacists are likely to seek them in the future.

The bioeconomic potential for agroforestry in Australia's northern grazing systems.

Although agriculture generates 16% of Australia's greenhouse gas emissions, it also has the potential to sequester large quantities of emissions through land use management options such as agroforestry. Whilst there is an extensive amount of agroforestry literature, little has been written on the economic consequences of adopting silvopastoral systems in northern Australia. This paper reports the financial viability of adopting complementary agroforestry systems in the low rainfall region of northern Australia. The analysis incorporates the dynamic tradeoffs between tree and pasture growth, likely forest product yields, carbon sequestration and livestock methane emissions in a bioeconomic model. The results suggest there are financial benefits for landholders who integrate complementary agroforestry activities into existing grazing operations at even modest carbon prices.

First record of stubby-root nematode (Paratrichodorus porosus) associated with barley in Australia

High populations (5000 to 20 000/kg soil) of the stubby-root nematode Paratrichodorus porosus were identified morphologically from soil samples taken under patches of poorly growing barley in a field between Yuleba and Surat in western Queensland, Australia. Lower populations (<4000/kg soil) were recovered from soil samples taken from asymptomatic barley. This is the first record of this nematode species on barley in Australia.

Detection of Polymyxa graminis in a barley crop in Australia.

Polymyxa graminis was detected in the roots of barley plants from a field near Wondai, Queensland, in 2009. P. graminis was identified by characteristic sporosori in roots stained with trypan blue. The presence of P. graminis f. sp. tepida (which is hosted by wheat and oats as well as barley) in the roots was confirmed by specific PCR tests based on nuclear ribosomal DNA. P. graminis is the vector of several damaging soil-borne virus diseases of cereals in the genera Furovirus, Bymovirus and Pecluvirus. No virus particles were detected in sap extracts from leaves of stunted barley plants with leaf chlorosis and increased tillering. Further work is required to determine the distribution of P. graminis in Australian grain crops and the potential for establishment and spread of the exotic soil-borne viruses that it vectors.