The Effect of Hydrogen Overvoltage on the Electrolytic Deposition of Zinc

In the deposition of metallic zinc by electro­lysis from neutral or acid solution, little difficulty is experienced provided certain impurities are absent from the electrolyte. The use of the process has long been considered as a potential source, patents on the process having been issued as early as 1880. However, the early experimenters failed to realize the importance of impurities in the electrolyte, and for this reason, the process suffered several severe setbacks when commercial plants were built.

Effect of Impurities upon Current Efficiency in the Electrolysis of Zinc Sulphate Solution

There are many elements which are detrimental to the current efficiency in the electrolysis of zinc sulphate solution. Fortunately the majority of these elements are easily removed in the purification process and cause no further trouble. The elements that are likely to cause trouble in ordinary plant operations are antimony, arsenic, cobalt, nickel, manganese and germanium. The following tests were made to determine the mutual effect on the current efficiency when several of the impurities were present in the electrolyte.

A Study of the Composition of Zinc Complex Cyanide Solutions by the Conductometric Method

As the method or analysis used up to the present time has failed to give quantitative results in determining the composition of zinc cyanide baths, conductometric methods were adopted in this study. Supplementary tests were also carried out in this investigation.

The Equilibrium Relations of Nickel Sulfide with Copper and Sodium Sulfides

The equilibrium relations of many of the metallic sulfides have long been a source of scientific and commer­cial interest, of particular interest, are the sulfides of nickel and copper, since the economic recovery of both of these useful metals, from their ores, involves the formation of a sulfide at some stage of the operations.

Effect of Manganese and Arsenic upon Current Efficiency in the Deposition of Zinc from Zinc Sulphate Solution

Throughout the entire experiment the electrolysis were conducted in an eight-hundred cubic centimeter beaker. An excellent circulation of the solution was assured by means of an electric stirrer, vigorous gas evolution from the anodes, and by means of a regulated feed-discharge system. By means of this balance, solution of the same impurity concentration as that of the electrolyte was fed in the cell just as fast as the discharge was syphoned out.

Ammoniacal Sulphate Leach of Ananconda Zinc Calcine Recovery of the Zinc by Electrolysis.

Zinc is produced from ores by two general methods, distillation and electrolysis. The general principles involved in the electrolytic zinc process of today were known as far back as 1880. Difficulties encountered in purifying the solution for electrolysis and lack of suitable mechanical apparatus were the main reasons that such a long time elapsed before the process was used to produce zinc in commercial quantities.

The Effect of Impurities on the Electrodeposition of Zinc from Zinc Sulfate Solution Containing Antimony.

It has been proven by research and years of experience, that before electrolytic zinc is possible, the electrolyte, as zinc sulfate solution must be prepared as pure as is economical. In other words, the ideal electrolyte must only be a solution of one metal - zinc. Every other metal and carbon must be excluded if good recovery and a firm deposit is to be obtained.

Electrolytic Recovery of Copper and Zinc from Brasses

Reclaimed metals, or secondary metals, are becoming of great im­portance in the metal industries of the world. Secondary metals are an important factor in production. The increase in the secondary production of copper is due to many factors. One of these may be its permenance, that is, the metal does not corrode very readily. Another reason for increase in production is the high price paid for it.

The Effects of Zinc Sulphate, Manganese Sulphate, and Iron Sulphate on the Lead Storage Cell.

The lead storage battery as it is used today is made up of the pasted type plates of lead dioxide, the anode, and sponge lead, the cathode, and wooden or hard rubber separators, which serve to insulate these from one another. In manufacturing these, it is desirable to keep them free from impurities.

The Control of the Grain Size of ZInc.

The use of zinc as a structural metal has been militated against by two of its properties, namely, its low tensile strength and its susceptibility to grain growth. The importance of these factors can be appreciated when it is realized that the tensile strength of coarsely crystalline cast zinc is 4,000 pounds per square inch, while finely crystalline cast zinc has a tensile strength of 12,000 pounds per square inch.

Electrolytic Recovery of Copper and Zinc from Brass

The purpose of this research was to continue the work of Thomas Parker, who worked on the recovery of copper and zinc from brass during the school year l934 - 1935. Since there is such a wide variety of brasses made with usually a third alloying constituent, remelt­ed scrap is suitable only for castings of wide tolerance in specifications.

A Rapid Determination of Small Amounts of Lead in Zinc

This investigation, carried on in the metallur­gical laboratories at the Montana School of Mines, was undertaken with the desire to work out a rapid method for the estimation, or the determination, of the amount of lead in zinc.

Electrolytic Recovery of Copper and Zinc from Brass.

The reclamation of metals from scrap is becoming increasingly important in the metallurgical industry. Copper, because it does not corrode readily and is electronegative to most common metals, is peculiarly adapted to reclamation.

Investigation of a Method for Extraction of Indium from Zinc Flue Dust.

In metallurgical practice today some of the relatively rare metal Indium is recovered as a by-product from the ores of other metals. Indium is a soft, silvery—white metal belonging to the third group of the periodic classification. It is situated just above tin in the electrochemical series.

A Study of the Concentration of a Copper-Zinc Ore.

The ore under investigation in this thesis is a copper-zinc ore which came from the state of New Mexico. The exact location is unobtainable. The purpose of the investigation was to determine the most effective means of concentration of the valuable min­erals present in the ore.