Genetic potential of a maize population from Southern Brazil for the modified convergent-divergent selection scheme

Maize (Zea mays L.) is a very important cereal to world-wide economy which is also true for Brazil, particularly in the South region. Grain yield and plant height have been chosen as important criteria by breeders and farmers from Santa Catarina State (SC), Brazil. The objective of this work was to estimate genetic-statistic parameters associated with genetic gain for grain yield and plant height, in the first cycle of convergent-divergent half-sib selection in a maize population (MPA1) cultivated by farmers within the municipality of Anchieta (SC). Three experiments were carried out in different small farms at Anchieta using low external agronomic inputs; each experiment represented independent samples of half-sib families, which were evaluated in randomized complete blocks with three replications per location. Significant differences among half-sib families were observed for both variables in all experiments. The expected responses to truncated selection of the 25% better families in each experiment were 5.1, 5.8 and 5.2% for reducing plant height and 3.9, 5.7 and 5.0% for increasing grain yield, respectively. The magnitudes of genetic-statistic parameters estimated evidenced that the composite population MPA1 exhibits enough genetic variability to be used in cyclical process of recurrent selection. There were evidences that the genetic structure of the base population MPA1, as indicated by its genetic variability, may lead to expressive changes in the traits under selection, even under low selection pressure.

Major Issues in Business Process Management: An Expert Perspective

The results presented in this report form a part of a larger global study on the major issues in BPM. Only one part of the larger study is reported here, viz. interviews with BPM experts. Interviews of BPM tool vendors together with focus groups involving user organizations, are continuing in parallel and will set the groundwork for the identification of BPM issues on a global scale via a survey (including a Delphi study). Through this multi-method approach, we identify four distinct sets of outcomes. First, as is the focus of this report, we identify the BPM issues as perceived by BPM experts. Second, the research design allows us to gain insight into the opinions of organisations deploying BPM solutions. Third, an understanding of organizations’ misconceptions of BPM technologies, as confronted by BPM tool vendors is obtained. Last, we seek to gain an understanding of BPM issues on a global scale, together with knowledge of matters of concern. This final outcome is aimed to produce an industry driven research agenda which will inform practitioners and in particular, the research community world-wide on issues and challenges that are prevalent or emerging in BPM and related areas.

Examination into the accuracy of exchangeable cation measurement in saline soils

Despite the increasing prevalence of salinity world-wide, the measurement of exchangeable cation concentrations in saline soils remains problematic. Two soil types (Mollisol and Vertisol) were equilibrated with a range of sodium adsorption ratio (SAR) solutions at various ionic strengths. The concentrations of exchangeable cations were then determined using several different types of methods, and the measured exchangeable cation concentrations compared to reference values. At low ionic strength (low salinity), the concentration of exchangeable cations can be accurately estimated from the total soil extractable cations. In saline soils, however, the presence of soluble salts in the soil solution precludes the use of this method. Leaching of the soil with a pre-wash solution (such as alcohol) was found to effectively remove the soluble salts from the soil, thus allowing the accurate measurement of the effective cation exchange capacity (ECEC). However, the dilution associated with this pre-washing increased the exchangeable Ca concentrations while simultaneously decreasing exchangeable Na. In contrast, when calculated as the difference between the total extractable cations and the soil solution cations, good correlations were found between the calculated exchangeable cation concentrations and the reference values for both Na (Mollisol: y=0.873x and Vertisol: y=0.960x) and Ca (Mollisol: y=0.901x and Vertisol: y=1.05x). Therefore, for soils with a soil solution ionic strength greater than 50 mM (electrical conductivity of 4 dS/m) (in which exchangeable cation concentrations are overestimated by the assumption they can be estimated as the total extractable cations), concentrations can be calculated as the difference between total extractable cations and soluble cations.

Report of the equine herpesvirus-1 Havermeyer Workshop, San Gimignano, Tuscany, June 2004

Amongst the infectious diseases that threaten equine health, herpesviral infections remain a world wide cause of serious morbidity and mortality. Equine herpesvirus-1 infection is the most important pathogen, causing an array of disorders including epidemic respiratory disease abortion, neonatal foal death, myeloencephalopathy and chorioretinopathy. Despite intense scientific investigation, extensive use of vaccination, and established codes of practice for control of disease outbreaks, infection and disease remain common. While equine herpesvirus-1 infection remains a daunting challenge for immunoprophylaxis, many critical advances in equine immunology have resulted in studies of this virus, particularly related to MHC-restricted cytotoxicity in the horse. A workshop was convened in San Gimignano, Tuscany, Italy in June 2004, to bring together clinical and basic researchers in the field of equine herpesvirus-1 study to discuss the latest advances and future prospects for improving our under-standing of these diseases, and equine immunity to herpesviral infection. This report highlights the new information that was the focus of this workshop, and is intended to summarize this material and identify the critical questions in the field. (c) 2006 Elsevier B.V. All rights reserved.

Application of biotechnology in breeding lentil for resistance to biotic and abiotic stress

Lentil is a self-pollinating diploid (2n = 14 chromosomes) annual cool season legume crop that is produced throughout the world and is highly valued as a high protein food. Several abiotic stresses are important to lentil yields world wide and include drought, heat, salt susceptibility and iron deficiency. The biotic stresses are numerous and include: susceptibility to Ascochyta blight, caused by Ascochyta lentis; Anthracnose, caused by Colletotrichum truncatum; Fusarium wilt, caused by Fusarium oxysporum; Sclerotinia white mold, caused by Sclerotinia sclerotiorum; rust, caused by Uromyces fabae; and numerous aphid transmitted viruses. Lentil is also highly susceptible to several species of Orabanche prevalent in the Mediterranean region, for which there does not appear to be much resistance in the germplasm. Plant breeders and geneticists have addressed these stresses by identifying resistant/tolerant germplasm, determining the genetics involved and the genetic map positions of the resistant genes. To this end progress has been made in mapping the lentil genome and several genetic maps are available that eventually will lead to the development of a consensus map for lentil. Marker density has been limited in the published genetic maps and there is a distinct lack of co-dominant markers that would facilitate comparisons of the available genetic maps and efficient identification of markers closely linked to genes of interest. Molecular breeding of lentil for disease resistance genes using marker assisted selection, particularly for resistance to Ascochyta blight and Anthracnose, is underway in Australia and Canada and promising results have been obtained. Comparative genomics and synteny analyses with closely related legumes promises to further advance the knowledge of the lentil genome and provide lentil breeders with additional genes and selectable markers for use in marker assisted selection. Genomic tools such as macro and micro arrays, reverse genetics and genetic transformation are emerging technologies that may eventually be available for use in lentil crop improvement.

Foucault and Feminism

Online encyclopedia providing detailed, scholarly information on key topics and philosophers in all areas of philosophy. The IEP is free of charge, is available to all internet users world wide, and is continually revised and updated.

Gambling in Brazil Lifetime prevalences and socio-demographic correlates

Gambling has experienced world-wide growth The current study is the first national survey into household gambling conducted in a developing country The sample was a three-stage probabilistic one designed to cover individuals 14 years old or older of both genders and from all regions of the national territory 325 census sectors were visited including rural areas DSM-IV-based instruments were used to assess problem and pathological gambling individuals were asked to estimate their monthly gambling expenditure The lifetime prevalences were pathological gambling 1 0% and problem gambling 1 3% Maximum gambling expenditure corresponded to 5 4% of the household income for social gamblers 16 9% for problem gamblers and 20 0% for pathological gamblers The male female ratio among adults for pathological gambling was 3 2 1 The data suggest the existence of two subgroups of pathological gamblers one younger (33 9 +/- 4 19) and severe (7 or more DSM-IV criteria) another older (47 8 +/- 6 01) and less severe (5-6 criteria) In a multinomial logistic regression problematic gambling was associated with gender age education employment region of origin and living in metropolitan areas The data suggest that feeling active and socially inserted protects against problematic gambling Individuals who are young male unemployed or not currently pursuing further education may be at special risk for severe pathological gambling (C) 2010 Elsevier Ireland Ltd All rights reserved

Increasing profits and reducing risks in crop production using participatory systems simulation approaches

The development of cropping systems simulation capabilities world-wide combined with easy access to powerful computing has resulted in a plethora of agricultural models and consequently, model applications. Nonetheless, the scientific credibility of such applications and their relevance to farming practice is still being questioned. Our objective in this paper is to highlight some of the model applications from which benefits for farmers were or could be obtained via changed agricultural practice or policy. Changed on-farm practice due to the direct contribution of modelling, while keenly sought after, may in some cases be less achievable than a contribution via agricultural policies. This paper is intended to give some guidance for future model applications. It is not a comprehensive review of model applications, nor is it intended to discuss modelling in the context of social science or extension policy. Rather, we take snapshots around the globe to 'take stock' and to demonstrate that well-defined financial and environmental benefits can be obtained on-farm from the use of models. We highlight the importance of 'relevance' and hence the importance of true partnerships between all stakeholders (farmer, scientists, advisers) for the successful development and adoption of simulation approaches. Specifically, we address some key points that are essential for successful model applications such as: (1) issues to be addressed must be neither trivial nor obvious; (2) a modelling approach must reduce complexity rather than proliferate choices in order to aid the decision-making process (3) the cropping systems must be sufficiently flexible to allow management interventions based on insights gained from models. The pro and cons of normative approaches (e.g. decision support software that can reach a wide audience quickly but are often poorly contextualized for any individual client) versus model applications within the context of an individual client's situation will also be discussed. We suggest that a tandem approach is necessary whereby the latter is used in the early stages of model application for confidence building amongst client groups. This paper focuses on five specific regions that differ fundamentally in terms of environment and socio-economic structure and hence in their requirements for successful model applications. Specifically, we will give examples from Australia and South America (high climatic variability, large areas, low input, technologically advanced); Africa (high climatic variability, small areas, low input, subsistence agriculture); India (high climatic variability, small areas, medium level inputs, technologically progressing; and Europe (relatively low climatic variability, small areas, high input, technologically advanced). The contrast between Australia and Europe will further demonstrate how successful model applications are strongly influenced by the policy framework within which producers operate. We suggest that this might eventually lead to better adoption of fully integrated systems approaches and result in the development of resilient farming systems that are in tune with current climatic conditions and are adaptable to biophysical and socioeconomic variability and change. (C) 2001 Elsevier Science Ltd. All rights reserved.

Beneficial effects of air inclusions on the performance of ethylene vinyl acetate (EVA) mouthguard material

Objective: To investigate the impact characteristics of an ethylene vinyl acetate (EVA) mouthguard material with regulated air inclusions, which included various air cell volumes and wall thickness between air cells. In particular, the aim was to identify the magnitude and direction of forces within the impacts. Method: EVA mouthguard material, A mm thick and with and without air inclusions, was impacted with a constant force impact pendulum with an energy of 4.4 J and a velocity of 3 m/s. Transmitted forces through the EVA material were measured using an accelerometer, which also allowed the determination of force direction and magnitude within the impacts. Results: Statistically significant reductions in the transmitted forces were observed with all the air inclusion materials when compared with EVA without air inclusions. Maximum transmitted force through one air inclusion material was reduced by 32%. Force rebound was eliminated in one material, and reduced second force impulses were observed in all the air inclusion materials. Conclusion: The regulated air inclusions improved the impact characteristics of the EVA mouthguard material, the material most commonly used in mouthguards world wide.

Extensive multiple test centre evaluation of the VecTest malaria antigen panel assay

To determine which species and populations of Anopheles transmit malaria in any given situation, immunological assays for malaria sporozoite antigen can replace traditional microscopical examination of freshly dissected Anopheles. We developed a wicking assay for use with mosquitoes that identifies the presence or absence of specific peptide epitopes of circumsporozoite (CS) protein of Plasmodium falciparum and two strains of Plasmodium vivax (variants 210 and 247). The resulting assay (VecTest(TM) Malaria) is a rapid, one-step procedure using a 'dipstick' test strip capable of detecting and distinguishing between P. falciparum and P. vivax infections in mosquitoes. The objective of the present study was to test the efficacy, sensitivity, stability and field-user acceptability of this wicking dipstick assay. In collaboration with 16 test centres world-wide, we evaluated more than 40 000 units of this assay, comparing it to the standard CS ELISA. The 'VecTest(TM) Malaria' was found to show 92% sensitivity and 98.1% specificity, with 97.8% accuracy overall. In accelerated storage tests, the dipsticks remained stable for >15 weeks in dry conditions up to 45degreesC and in humid conditions up to 37degreesC. Evidently, this quick and easy dipstick test performs at an acceptable level of reliability and offers practical advantages for field workers needing to make rapid surveys of malaria vectors.

Estudo das tensões interlaminares e rotura de elementos curvos em materiais compósitos

Este trabalho aborda o comportamento mecânico de elementos curvos em materiais compósitos aquando sujeitos a forças e momentos nas extremidades. Os modos de falha mais comuns são estudados em detalhe: falha transversal na matriz devido a tensões de flexão (tensões circunferenciais), ou falha por delaminagem devido as tensões interlaminares de tracção verificadas ao longo da espessura na região curva (tensões radiais). Inicialmente, faz-se uma abordagem sobre a influência de Z-Pins na resistência interlaminar, uma abordagem sobre os efeitos de bordo, e sobre tensões interlaminares com base em teorias Layerwise de ordem superior. Salienta-se, ainda, a importância do estudo feito com o World-Wide Failure Exercise (WWFE) (Hinton et al. 2004) na comunidade científica relacionada com o tema dos materiais compósitos. O presente trabalho, é essencialmente dividido em duas partes: modelos analíticos e modelos numéricos. São estudados provetes curvos, em forma de C (semicircular), geometria analisada por Ko e Jackson (1989); e em forma de L (cantoneira de abas iguais), analisados por Sun e Kelly (1988). Começa-se por fazer uma análise teórica, através da Teoria Multicamada, ao trabalho Ko e Jackson, autores da mesma. Analisou-se também, através desta teoria, a parte em quarto de círculo da viga estudada por Sun e Kelly. Após ter a solução analítica bem compreendida, essa teoria é aplicada ao principal estudo deste trabalho, um provete semicircular, usando os empilhamentos de Sun e Kelly. É ainda estudado, e aplicado a este último, o critério de falha em três dimensões (3D) proposto por Hashin (1980). Na segunda parte, é feita uma validação numérica dos três casos anteriores, com recurso ao software comercial de elementos finitos (EF), ANSYS. Estes estudos de EF têm a diferença, relativamente aos originais, de serem em 3D, podendo assim ser retiradas todas as tensões necessárias para se aplicar o critério de falha. No final, é feita uma comparação geral entre os resultados analíticos e numéricos.

Wells turbine: fiberglass flanges

A introdução desta tese começa por realizar um enquadramento do projecto em mão, apresentando a central de energia das ondas em que se encontram os componentes em fibra de vidro a projectar. Esta central usa o princípio de variação de coluna de água, e encontra-se localizada na ilha do Pico, Açores. São de seguida apresentados os objectivos deste trabalho, que consistem na selecção de materiais de fabrico dos componentes, desenvolvimento de uma metodologia para projectar juntas aparafusadas em materiais compósitos, dimensionamento e comparação de duas juntas concorrentes em materiais compósitos: junta solicitada à tracção e junta solicitada ao corte, validação da análise e estudo das causas dos vários tipos de falha destas juntas. A parte I deste trabalho é o resultado da pesquisa bibliográfica efectuada para levar a cabo os objectivos definidos. Assim, começa por se fazer uma descrição dos materiais e processos de fabrico que mais se adequam ao presente projecto, nomeadamente fibra de vidro, resinas, tecidos, impregnação manual, RTM e infusão por vácuo. Daqui resultou que os materiais mais adequados para esta aplicação são fibra de vidro do tipo E e resina polyester devido ao seu baixo custo e larga utilização em aplicações estruturais marinhas. O processo de fabrico mais eficiente é a infusão por vácuo devido á sua vocação para pequenas séries de produção, a poupança que permite em termos de mão-de-obra, a complacência com normas de emissão de voláteis e as boas propriedades das partes produzidas. No capítulo II da parte I são discutidos os tópicos relacionados com juntas em materiais compósitos. Da pesquisa levada a cabo conclui-se que as grandes vantagens das juntas aparafusadas são a sua facilidade de montagem e desmontagem, facilidade de inspecção e capacidade de ligar quaisquer tipos de materiais. Quanto à furação de compósitos é importante referir a necessidade de utilizar ferramentas resistentes e parâmetros de maquinação que minimizem o dano infligido aos laminados. Isto é possível através da selecção de ferramentas com passos baixos que reduzam igualmente a dimensão do seu centro estático responsável pela força axial exercida sobre o laminado - principal factor causador de dano. Devem-se igualmente utilizar baixas velocidades de avanço e elevadas velocidades de rotação. É importante salientar a importância da realização de pré-furação, de utilização de um prato de suporte na superfície de saída do laminado e a existência de ferramentas especialmente concebidas para a furação de compósitos. Para detectar e quantificar o dano existente num furo destacam-se os métodos de inspecção ultrasónica e a radiografia. Quanto aos parâmetros que influenciaram o comportamento de juntas aparafusadas destacam-se os rácios largura/diâmetro, distância ao bordo/diâmetro, espessura/diâmetro, pré-tensão, fricção, sequência de empilhamento e respectivas proporções, dimensão das anilhas e folga entre o parafuso e o furo. A pesquisa efectuada visando metodologias de projecto fiáveis ditou a necessidade de utilizar métodos que permitiram determinar o parafuso mais carregado de uma junta, efectuar o cálculo de tensões no mesmo, e ainda métodos que permitam determinar a primeira falha que ocorre no laminado bem como a falha final no mesmo. O capítulo III da primeira parte descreve os métodos de análise de tensões necessários para as metodologias de projecto utilizadas. Aqui é apresentada a teoria clássica da laminação, um método para determinação do parafuso mais carregado, um método analítico baseado na teoria da elasticidade anisotrópica de um corpo e o método dos elementos finitos. O método para determinar o parafuso mais carregado - análise global - consiste num modelo bidimensional de elementos finitos em que 2 laminados coincidentes são modelados com elementos lineares de casca com 4 nós, sendo a extremidade de um laminado restringida em todos os graus de liberdade e a extremidade oposta do segundo laminado carregada com a carga pretendida. Os laminados são ligados através de elementos mola que simulam os parafusos, sendo a sua constante de rigidez previamente calculada para este fim. O método analítico modela o contacto assumindo uma distribuição de pressão cosinoidal ao longo de metade do furo, e é válido para laminados simétricos e quasi-isotrópicos. O método dos elementos finitos é o que mais factores permite ter em conta, sendo os modelos tridimensionais com um elemento por camada os que melhor modelam o estado de tensões experienciado por uma junta aparafusada em materiais compósitos. O tópico de análise de falha é abordado no capítulo 4 da primeira parte. Aqui são apresentados os resultados do world wide failure exercice que compara vários critérios de falha existentes até 2004, fazendo-se referência a desenvolvimentos recentes que têm ocorrido nesta área. O critério de Puck surge como aquele que permite previsões de falha mais exactas. O critério de falha de Hashin 3D foi o escolhido para o presente trabalho, devido à sua facilidade de implementação num modelo de elementos finitos, à sua capacidade para detectar modos de falha subcríticos e à sua utilização em trabalhos anteriores que apresentaram previsões de falha muito próximas dos dados experimentais. Também neste capítulo se apresentaram os vários tipos de falha de uma junta aparafusada em materiais compósitos, apresentando as causas de cada uma. Por fim, na última secção, apresenta-se o método de dano progressivo que se desenvolveu para prever a primeira falha final do laminado. Este é muito interessante tendo permitido previsões de falha muito próximas dos resultados experimentais em trabalhos anteriores. Este método é iterativo e encontra-se dividido em 3 passos: Análise de tensões, análise de falha utilizando o critério de Hashin 3D e degradação de propriedades, de acordo com o tipo de falha detectada. Para além dos passos referidos, existe ainda um quarto responsável pelo fim da análise que consiste na aferição da existência ou não de falha final e respectivo tipo de falha (por pressão de contacto, por tensão ou por esforços de corte). No capítulo V da primeira parte é apresentado o resultado de uma pesquisa das normas de teste necessárias para obter as propriedades dos materiais requeridas para a aplicação dos métodos descritos neste trabalho. A parte II deste trabalho consiste na aplicação dos métodos apresentados na parte I ao caso concreto em estudo. Os softwares Microsoft Excel, Matlab e ANSYS foram utilizados para este fim. A junta começa por ser dimensionada estimando a espessura necessária do componente e o número e características dos parafusos. De seguida foi feita uma análise global à flange em estudo determinando a força suportada pelo parafuso mais carregado. Após esta análise desenvolveu-se um modelo tridimensional de elementos finitos da zona em que se encontra o parafuso mais carregado, utilizando elementos sólidos lineares e isoparamétricos de 8 nós e uma malha gerada pelo método directo. Aplicou-se a este modelo o algoritmo de dano progressivo descrito na primeira parte. Começou por se incluir explicitamente o parafuso, anilhas, pré-tensão e a modelação dos vários contactos com fricção posteriormente simplificado o modelo restringindo radialmente os nós da porção carregada do furo, excluindo os factores mencionados inicialmente. Procurou-se validar o modelo utilizando o método de cálculo de tensões descrito na primeira parte, desenvolvendo um programa em Matlab para o efeito. Tal não foi possível tendo-se incluído a tentativa realizada em anexo. Para efeitos de dimensionamento, desenvolveu-se um modelo de elementos finitos de duas dimensões da junta em causa, utilizando elementos de casca lineares de quatro nós isoparamétricos com uma espessura unitária. Através da análise de tensões efectuada com este modelo, e utilizando um método combinado programado em linguagem paramétrica, foi possível dimensionar as duas juntas concorrentes pretendidas. Este método combinado consistiu no cálculo de tensões em pontos localizados sobre uma curva característica e utilização de um critério de falha quadrático para cálculo da espessura necessária para a junta. O dimensionamento ditou que a junta solicitada à tensão necessita de pelo menos 127% das camadas e do custo de uma junta solicitada ao corte equivalente.

Renewable-based generation integration in electricity markets with virtual power producers

The development of renewable energy sources and Distributed Generation (DG) of electricity is of main importance in the way towards a sustainable development. However, the management, in large scale, of these technologies is complicated because of the intermittency of primary resources (wind, sunshine, etc.) and small scale of some plants. The aggregation of DG plants gives place to a new concept: the Virtual Power Producer (VPP). VPPs can reinforce the importance of these generation technologies making them valuable in electricity markets. VPPs can ensure a secure, environmentally friendly generation and optimal management of heat, electricity and cold as well as optimal operation and maintenance of electrical equipment, including the sale of electricity in the energy market. For attaining these goals, there are important issues to deal with, such as reserve management strategies, strategies for bids formulation, the producers’ remuneration, and the producers’ characterization for coalition formation. This chapter presents the most important concepts related with renewable-based generation integration in electricity markets, using VPP paradigm. The presented case studies make use of two main computer applications:ViProd and MASCEM. ViProd simulates VPP operation, including the management of plants in operation. MASCEM is a multi-agent based electricity market simulator that supports the inclusion of VPPs in the players set.

Projecto suspensão formula student

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Concepção de uma aplicação móvel no âmbito da ecologia e sustentabilidade ambiental

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Audiovisual e Multimédia.