On the maximum throughput of two-hop wireless network coding

Network coding has shown the promise of significant throughput improvement. In this paper, we study the throughput of two-hop wireless network coding and explore how the maximum throughput can be achieved under a random medium access scheme. Unlike previous studies, we consider a more practical network where the structure of overhearing status between the intended receivers and the transmitters is arbitrary. We make a formal analysis on the network throughput using network coding upon the concept of network coding cliques (NCCs). The analysis shows that the maximum normalized throughput, subject to fairness requirement, is n/n+m, where n is the number of transmitters and m is the number of NCCs in a 2-hop wireless network. We have also found that this maximum throughput can be achieved under a random medium access scheme when the medium access priority of the relay node is equal to the number of NCCs in the network. Our theoretical findings have been validated by simulation as well.

Implementing recovery in low-resource stationary wireless sensor networks

Implementation of certain types of protocols on wireless sensor networks (WSNs) can be difficult due to the architecture of the motes. Identification of these issues and recommendations for workarounds can be very useful for the WSN research community testing hardware. In recent work, the authors developed and implemented clustering, reprogramming and authentication protocols involved in recovering WSNs with low resources. In attempting to integrate these protocols, several issues arose in the implementation phase connected to pre-set configurations of the motes used. In this paper, we describe the issues arising in integrating our protocols using Zigbee with IEEE 802.15.4 and the reprogramming module Deluge, and compare our challenges and solutions with those faced by other researchers in this area. Finally, we provide recommendations for consideration by researchers who may in future consider integrating several protocols on these platforms.

Trust mechanisms in wireless sensor networks : attack analysis and countermeasures

As the trust issue in wireless sensor networks is emerging as one important factor in security schemes, it is necessary to analyze how to resist attacks with a trust scheme. In this paper we categorize various types of attacks and countermeasures related to trust schemes in WSNs. Furthermore, we provide the development of trust mechanisms, give a short summarization of classical trust methodologies and emphasize the challenges of trust scheme in WSNs. An extensive literature survey is presented by summarizing state-of-the-art trust mechanisms in two categories: secure routing and secure data. Based on the analysis of attacks and the existing research, an open field and future direction with trust mechanisms in WSNs is provided.

Resource-aware speculative prefetching in wireless networks

Mobile users connected to wireless networks expect performance comparable to those on wired networks for interactive multimedia applications. Satisfying Quality of Service (QoS) requirements for such applications in wireless networks is a challenging problem due to limitations of low bandwidth, high error rate and frequent disconnections of wireless channels. In addition, wireless networks suffer from varying bandwidth. In this paper we investigate object prefetching during times of connectedness and bandwidth availability to enhance user perceived connectedness. This paper presents an access model that is suitable for multimedia access in wireless networks. Access modelling for the purpose of predicting future accesses in the context of speculative prefetching has received much attention in the literature. The model recognizes that a web page, instead of just a single file, is typically a compound of several files. When it comes to making prefetch decisions, most previous studies in speculative prefetching resort to simple heuristics, such as prefetching an item with access probabilities larger than a manually tuned threshold. This paper takes a different approach. Specifically, it models the performance of the prefetcher, taking into account access predictions and resource parameters, and develops a prefetch policy based on a theoretical analysis of the model. Since the analysis considers cache as one of the resource parameters, the resulting policy integrates prefetch and cache replacement decisions. The paper investigates the effect of prefetching on network load. In order to make effective use of available resources and maximize access improvement, it is beneficial to prefetch all items with access probabilities exceeding certain threshold.

Wi-Fi security : wireless with confidence

Since the IEEE ratification of the 802.11 standard in 1999, continuous exploits have been discovered compromising the confidentiality, integrity and availability of 802.11 networks. This paper describes the justification for a project to assess the security status of wireless network usage in society. It reviews the status of both commercial and residential approaches to wireless network security in three major Victorian cities, Melbourne, Geelong and Mornington, in Australia. By War Driving these suburbs, actual data was gathered to indicate the security status of wireless networks and give a representation of modern attitudes towards wireless security for the sample population. Preliminary results are presented to demonstrate the extent to which commercial or residential suburbs address wireless security. At this stage in the research further work is required to completely analyse the results. It is anticipated that the results will be useful for providing input into a defence and attack methodology for improving the security of both residential and commercial use of wireless networks.

Indoor location prediction using multiple wireless received signal strengths

This paper presents a framework for indoor location prediction system using multiple wireless signals available freely in public or office spaces. We first propose an abstract architectural design for the system, outlining its key components and their functionalities. Different from existing works, such as robot indoor localization which requires as precise localization as possible, our work focuses on a higher grain: location prediction. Such a problem has a great implication in context-aware systems such as indoor navigation or smart self-managed mobile devices (e.g., battery management). Central to these systems is an effective method to perform location prediction under different constraints such as dealing with multiple wireless sources, effects of human body heats or mobility of the users. To this end, the second part of this pa- per presents a comparative and comprehensive study on different choices for modeling signals strengths and prediction methods under different condition settings. The results show that with simple, but effective modeling method, almost perfect prediction accuracy can be achieved in the static environment, and up to 85% in the presence of human movements. Finally, adopting the proposed framework we outline a fully developed system, named Marauder, that support user interface interaction and real-time voice-enabled location prediction.

Multicast lifetime maximization using network coding in lossy wireless ad-hoc networks

In traditional stop-and-wait strategy for reliable communications, such as ARQ, retransmission for the packet loss problem would incur a great number of packet transmissions in lossy wireless ad-hoc networks. We study the reliable multicast lifetime maximization problem by alternatively exploring the random linear network coding in this paper. We formulate such problem as a min-max problem and propose a heuristic algorithm, called maximum lifetime tree (MLT), to build a multicast tree that maximizes the network lifetime. Simulation results show that the proposed algorithms can significantly increase the network lifetime when compared with the traditional algorithms under various distributions of error probability on lossy wireless links.

A cache-based mobility-aware scheme for real-time continuous media delivery in wireless networks

Providing real-time or continuous media (CM) application services in wireless networks poses a significant challenge, as it requires timely delivery of data in a best-effort network. In this paper, we propose a cache-based scheme for mobility-aware, CM applications. The proposed scheme exploits a previously proposed caching strategy to complement Mobile-IP by placing services closer to migrated mobile nodes. The central idea of this work is based on the migration of sessions in order to facilitate uninterrupted delivery of CM in mobile environments. The performance of the proposed scheme is investigated by simulation studies. In particular, the effect of the proposed scheme on several QoS parameters under varying conditions of mobility and CM data is measured.

A policy-based web service redundancy detection in wireless sensor networks

Wireless sensor networks (WSNs) are attractive for monitoring and gathering physical information (e.g. temperature) via lots of deployed sensors. For the applications in WSNs, Web service is one of the recommended frameworks to publish, invoke, and manage services. However, the standard Web service description language (WSDL), defines only the service input and output while ignoring the corresponding input-to-output mapping relationships. This presents a serious challenge in distinguishing services with similar input and output interface. In this paper, we address this challenge by embedding the service policy into the traditional WSDL2.0 schema to describe the input-to-output mapping relationships. The service policy is then transformed into a policy binary tree so that the similarity between different Web services can be quantitatively evaluated. Furthermore, a new service redundancy detection approach is proposed based on this similarity. Finally, the case study and experimental analysis illustrate the applicability and capability of the proposed service redundancy detection approach.

Comonitoring of adenosine and dopamine using the wireless instantaneous neurotransmitter concentration system : proof of principle : laboratory investigation

Object

The authors of previous studies have demonstrated that local adenosine efflux may contribute to the therapeutic mechanism of action of thalamic deep brain stimulation (DBS) for essential tremor. Real-time monitoring of the neurochemical output of DBS-targeted regions may thus advance functional neurosurgical procedures by identifying candidate neurotransmitters and neuromodulators involved in the physiological effects of DBS. This would in turn permit the development of a method of chemically guided placement of DBS electrodes in vivo. Designed in compliance with FDA-recognized standards for medical electrical device safety, the authors report on the utility of the Wireless Instantaneous Neurotransmitter Concentration System (WINCS) for real-time comonitoring of electrical stimulation–evoked adenosine and dopamine efflux in vivo, utilizing fast-scan cyclic voltammetry (FSCV) at a polyacrylonitrile-based (T-650) carbon fiber microelectrode (CFM).
Methods

The WINCS was used for FSCV, which consisted of a triangle wave scanned between −0.4 and +1.5 V at a rate of 400 V/second and applied at 10 Hz. All voltages applied to the CFM were with respect to an Ag/AgCl reference electrode. The CFM was constructed by aspirating a single T-650 carbon fiber (r = 2.5 μm) into a glass capillary and pulling to a microscopic tip using a pipette puller. The exposed carbon fiber (the sensing region) extended beyond the glass insulation by ~ 50 μm. Proof of principle tests included in vitro measurements of adenosine and dopamine, as well as in vivo measurements in urethane-anesthetized rats by monitoring adenosine and dopamine efflux in the dorsomedial caudate putamen evoked by high-frequency electrical stimulation of the ventral tegmental area and substantia nigra.
Results

The WINCS provided reliable, high-fidelity measurements of adenosine efflux. Peak oxidative currents appeared at +1.5 V and at +1.0 V for adenosine, separate from the peak oxidative current at +0.6 V for dopamine. The WINCS detected subsecond adenosine and dopamine efflux in the caudate putamen at an implanted CFM during high-frequency stimulation of the ventral tegmental area and substantia nigra. Both in vitro and in vivo testing demonstrated that WINCS can detect adenosine in the presence of other easily oxidizable neurochemicals such as dopamine comparable to the detection abilities of a conventional hardwired electrochemical system for FSCV.
Conclusions

Altogether, these results demonstrate that WINCS is well suited for wireless monitoring of high-frequency stimulation-evoked changes in brain extracellular concentrations of adenosine. Clinical applications of selective adenosine measurements may prove important to the future development of DBS technology.

Wireless instantaneous neurotransmitter concentration system-based amperometric detection of dopamine, adenosine, and glutamate for intraoperative neurochemical monitoring - laboratory investigation

Object  In a companion study, the authors describe the development of a new instrument named the Wireless Instantaneous Neurotransmitter Concentration System (WINCS), which couples digital telemetry with fast-scan cyclic voltammetry (FSCV) to measure extracellular concentrations of dopamine. In the present study, the authors describe the extended capability of the WINCS to use fixed potential amperometry (FPA) to measure extracellular concentrations of dopamine, as well as glutamate and adenosine. Compared with other electrochemical techniques such as FSCV or high-speed chronoamperometry, FPA offers superior temporal resolution and, in combination with enzyme-linked biosensors, the potential to monitor nonelectroactive analytes in real time.

Methods  The WINCS design incorporated a transimpedance amplifier with associated analog circuitry for FPA; a microprocessor; a Bluetooth transceiver; and a single, battery-powered, multilayer, printed circuit board. The WINCS was tested with 3 distinct recording electrodes: 1) a carbon-fiber microelectrode (CFM) to measure dopamine; 2) a glutamate oxidase enzyme–linked electrode to measure glutamate; and 3) a multiple enzyme–linked electrode (adenosine deaminase, nucleoside phosphorylase, and xanthine oxidase) to measure adenosine. Proof-of-principle analyses included noise assessments and in vitro and in vivo measurements that were compared with similar analyses by using a commercial hardwired electrochemical system (EA161 Picostat, eDAQ; Pty Ltd). In urethane-anesthetized rats, dopamine release was monitored in the striatum following deep brain stimulation (DBS) of ascending dopaminergic fibers in the medial forebrain bundle (MFB). In separate rat experiments, DBS-evoked adenosine release was monitored in the ventrolateral thalamus. To test the WINCS in an operating room setting resembling human neurosurgery, cortical glutamate release in response to motor cortex stimulation (MCS) was monitored using a large-mammal animal model, the pig.

Results   The WINCS, which is designed in compliance with FDA-recognized consensus standards for medical electrical device safety, successfully measured dopamine, glutamate, and adenosine, both in vitro and in vivo. The WINCS detected striatal dopamine release at the implanted CFM during DBS of the MFB. The DBS-evoked adenosine release in the rat thalamus and MCS-evoked glutamate release in the pig cortex were also successfully measured. Overall, in vitro and in vivo testing demonstrated signals comparable to a commercial hardwired electrochemical system for FPA.

Conclusions  By incorporating FPA, the chemical repertoire of WINCS-measurable neurotransmitters is expanded to include glutamate and other nonelectroactive species for which the evolving field of enzyme-linked biosensors exists. Because many neurotransmitters are not electrochemically active, FPA in combination with enzyme-linked microelectrodes represents a powerful intraoperative tool for rapid and selective neurochemical sampling in important anatomical targets during functional neurosurgery.