H－Y单克隆抗体的制备方法

用Ｂａｌｂ／ｃ雄小鼠的脾细胞和皮肤组织对同系雌小鼠脾脏作一次直接免疫和５次腹腔加强免疫，雌小鼠产生良好的免疫应答。其抗血清用未经免疫的雌小鼠脾细胞吸收后，经细胞毒性法检测，Ｈ－Ｙ抗血清的效价可达１：１０２４；选择免疫应答最好的２只雌小鼠，取其脾细胞与ＮＳ－１骨髓瘤细胞进行融合，融合率１００％，经３次有限稀释克隆后，取４只阳性最强的杂交瘤细胞制备腹水。取其中一株的腹水采用胚胎细胞毒法进行特异性鉴定，结果其对２０个正常胚胎中的７个有杀伤溶解现象。４株细胞系分泌的抗体（腹水）以精子细胞毒法测定其效价分别为１：５１２、１：５１２、１：２５６和１：１２８。

微囊藻毒素对滇池水华束丝藻的溶藻效应研究

用不同浓度的微囊藻毒素(MC-RR)处理自滇池分离的水华束丝藻,研究了MC-RR对水华束丝藻的生理特性和超微结构的影响.结果显示:10μg/L的MC-RR可轻微促进水华束丝藻的生长,而100μg/L和1 000μg/L的MC-RR对水华束丝藻表现为急性致死效应.藻的生理机能完全破坏,可溶性碳水化合物和蛋白质含量上升,光合系统PSⅡ活性迅速降为零.藻丝在48 h后开始断裂、解体,并逐渐溶解.其超微结构显示细胞膜受损,藻细胞内含物几乎完全渗漏.以上结果说明,微囊藻毒素对水华束丝藻有显著的溶藻效应,微囊藻毒素在

Learning based automatic face annotation for arbitrary poses and expressions from frontal images only

Statistical approaches for building non-rigid deformable models, such as the Active Appearance Model (AAM), have enjoyed great popularity in recent years, but typically require tedious manual annotation of training images. In this paper, a learning based approach for the automatic annotation of visually deformable objects from a single annotated frontal image is presented and demonstrated on the example of automatically annotating face images that can be used for building AAMs for fitting and tracking. This approach employs the idea of initially learning the correspondences between landmarks in a frontal image and a set of training images with a face in arbitrary poses. Using this learner, virtual images of unseen faces at any arbitrary pose for which the learner was trained can be reconstructed by predicting the new landmark locations and warping the texture from the frontal image. View-based AAMs are then built from the virtual images and used for automatically annotating unseen images, including images of different facial expressions, at any random pose within the maximum range spanned by the virtually reconstructed images. The approach is experimentally validated by automatically annotating face images from three different databases. © 2009 IEEE.

PCB-integrated optical waveguide sensors: An ammonia gas sensor

This paper presents a novel platform for the formation of cost-effective PCB-integrated optical waveguide sensors. The sensor design relies on the use of multimode polymer waveguides that can be formed directly on standard PCBs and commercially-available chemical dyes, enabling the integration of all essential sensor components (electronic, photonic, chemical) on low-cost substrates. Moreover, it enables the detection of multiple analytes from a single device by employing waveguide arrays functionalised with different chemical dyes. The devices can be manufactured with conventional methods of the PCB industry, such as solder-reflow processes and pick-and-place assembly techniques. As a proof of principle, a PCB-integrated ammonia gas sensor is fabricated on a FR4 substrate. The sensor operation relies on the change of the optical transmission characteristics of chemically functionalised optical waveguides in the presence of ammonia molecules. The fabrication and assembly of the sensor unit, as well as fundamental simulation and characterisation studies, are presented. The device achieves a sensitivity of approximately 30 ppm and a linear response up to 600 ppm at room temperature. Finally, the potential to detect multiple analytes from a single device is demonstrated using principal-component analysis. © 1983-2012 IEEE.

A survey of alternative once-through fast reactor core designs

Reprocessing of Light Water Reactor (LWR) spent fuel to recover plutonium or transuranics for use in Sodium cooled Fast Reactors (SFRs) is a distant prospect in the U.S.A. This has motivated our evaluation of potentially cost-effective operation of uranium startup fast reactors (USFRs) in a once-through mode. This review goes beyond findings reported earlier based on a UC fueled MgO reflected SFR to describe a broader parametric study of options. Cores were evaluated for a variety of fuel/coolant/reflector combinations: UC/UZr/UO 2/UN;Na/Pb; MgO/SS/Zr. The challenge is achieving high burnup while minimizing enrichment and respecting both cladding fluence/dpa and reactivity lifetime limits. These parametric studies show that while UC fuel is still the leading contender, UO 2 fuel and ZrH 1.7 moderated metallic fuel are also attractive if UC proves to be otherwise inadequate. Overall, these findings support the conclusion that a competitive fuel cycle cost and uranium utilization compared to LWRs is possible for SFRs operated on a once-through uranium fueled fuel cycle. In addition, eventual transition to TRU recycle mode is studied, as is a small test reactor to demonstrate key features.

KHAWIA SAUROGOBII N. SP (CESTODA: CARYOPHYLLIDEA) FROM FRESHWATER FISH SAUROGOBIO SPP. (CYPRINIDAE) IN CHINA

Khawia saurogobii n. sp. is described from the intestine of the cyprinid fishes Saurogobio dabryi and Saurogobio dumerili in China. The new species belongs to the Lytocestidae and is placed in Khawia because of its afossate scolex, vitelline follicles in the cortical parenchyma, uterus not looping anterior to the cirrus sac, gonopores separate but close together in distinct genital atrium, external seminal vesicle absent, and postovarian follicles present. The new species differs from other congeneric species by the shape of the body markedly tapering posteriorly from the end of the anterior third, the shape of the scolex that is very short and markedly wider than the neck, spatulate without incisions, but shallow superficial grooves, vitelline follicles and testes starting immediately posterior to the scolex, and an ovary with long, posterior arms bent medially, thus giving the shape of an inverted A.

Lossless electroabsorption modulator monolithically rntegrated with a semiconductor optical amplifier and dual-wavegulde spot-size converters

Semiconductor optical amplifier and electroabsorption modulator monolithically integrated with dual-waveguide spot-size converters at the input and output ports is demonstrated by means of selective area growth, quantum-well intermixing, and asymmetric twin waveguide technologies. At the wavelength range of 1550 similar to 1600 nm, lossless operation with extinction ratios of 25-dB dc and 11.8-dB radio frequency and more than 10-GHz 3-dB modulation bandwidth is successfully achieved. The output beam divergence angles of the device in the horizontal and vertical directions are as small as 7.3 degrees x 10.6 degrees, respectively, resulting in 3.0-dB coupling loss with cleaved single-mode optical fiber.

Stabilized and tunable single-frequency erbium-doped fiber ring laser employing external injection locking

A stabilized and tunable single-longitudinal-mode erbium-doped fiber ring laser has been proposed and experimentally demonstrated. The laser is structured by combining the compound cavity with a fiber Fabry-Perot tunable filter. An injection-locking technique has been used to stabilize the wavelength and output power of the laser. One of the longitudinal modes is stimulated by the injected continuous wave so that this mode is able to win the competition to stabilize the system. A minimum output power of 0.6 dBm and a signal-to-noise ratio of over 43 dB within the tuning range of 1527-1562 nm can be achieved with the proposed technique. A wavelength variation of less than 0.01 nm, a power fluctuation of less than 0.02 dB, and a short-term linewidth of about 1.4 kHz have also been obtained.

RBAC与MAC在多级关系数据库中的综合模型

多级安全数据库的安全策略需要各种模型来表达,访问控制模型是其中之一.强制访问控制(MAC)模型保证多级数据库中的信息流动符合系统的安全策略.利用基于角色的访问控制(RBAC)来实现MAC能方便多级安全数据库的权限管理.提出了一种MAC与RBAC的综合模型,定义了多级角色与内部角色的概念,并给出了综合模型中经过修改后的操作,使得系统能自动地完成符合强制访问控制策略的用户权限的管理.该模型方便了管理员的权限管理,适合用户较多,安全层次比较复杂的多级关系数据库系统.最后给出了模型的部分实现机制.

基于本体的发布/订阅系统的数据模型和匹配算法

现有的发布／订阅系统不能根据事件的语义来进行事件与订阅的匹配，且不能支持具有复杂结构（如图状结构）的事件．将语义Web技术引入发布／订阅系统中，提出一种基于本体的发布／订阅系统．该系统采用本体来表示事件的概念模型，采用RDF图来表示事件，采用图模式来表示订阅条件．它能较好地解决现有的发布／订阅系统的上述问题．实验结果表明，该系统具有较高的订阅匹配效率．

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO2 sol-gels with various Ag/TiO2 molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO2 thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO2 nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO2 sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO2 sol-gel, four types of the TiO2 thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO,), TA (bottom layer was pure TiO,, surface layer was Ag modified), TT (pure TiO, thin film) and AA (TiO, thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I-ph). LSV confirmed the existence of Ago state in the TiO, thin film. SEM and XRD experiments indicated that the sizes of the TiO,, nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO2 thin film.