A record production from an integrated farming system utilising sewage enriched water

The results of experiments conducted on a pond dyke (655m²) in the Wastewater Aquaculture Division of the Central Institute of Freshwater Aquaculture, Rahara, during 1992-93 for maximising production through optimum utilisation of resources are communicated. Round the year intensive cultivation of okra (Abelmoschus esculentus), amaranth (Amaranthus gangeticus and A. viridus), water-bind weed (Ipomea aquatica), Indian spinach (Basella rubra), radish (Raphanus sativum), amaranth (Amaranthus viridis), cauliflower (Brassica oleracia var. votrytis), cabbage (Brassica oleracia var. capitota) and papaya (Carica papaya) was undertaken using the treated sewage water from fish ponds for irrigation. The pond dyke yielded 5,626.5 kg vegetable which worked out to 85.9 tons per ha per year. Multiple cropping with these vegetables excluding papaya on a 460 m² dyke recorded a production of 4,926.5 kg at the rate of 107.1t per ha/yr. An improved yearly net return of about 35% over investment could be achieved through the selection of highly productive and pest resistant vegetable crops of longer duration for integration into the system. Introduction of this type of integrated farming would enhance the overall productivity and returns from farming.

Rearing of Labeo bata in sewage-fed fish culture pond

Labeo bata is a highly priced fish which commanding good consumer preference, even if the size is very small (15 to 20 g each), especially in West Bengal. With a view to evaluating the culture potential of this fish, repeated experiments were conducted at the Wastewater Aquaculture Division of the Central Institute of Freshwater Aquaculture, Rahara, West Bengal, during 1991-93 in ponds fed with treated domestic sewage effluent. An average production of 1270.63 kg per ha was obtained within 6 to 10 months for a uniform stocking density of 50,000 seed per ha. The average size attained by the fish in the different sets of experiments varied from 23.3 to 37.9 g as against the initial weight of 0.096 to 0.193 g. Details of management, growth, survival, quantity of sewage used and pond nutrient status and productivity are dealt with in this communication.

Arsenic level in the surface wastewaters of Kolkata and its implication on sewage-fed fisheries

Arsenic pollution is a major threat in eastern India and Bangladesh. In Kolkata, sewage-fed fishery is a very popular culture. Wastewater of Kolkata city is diluted with freshwater and used in sewage-fed fish ponds. In the present study the arsenic concentration in the surface wastewater from forty-four different places of southern, eastern, western and norther parts of Kolkata was estimated. In fifteen places, the arsenic level was higher than the allowed limit (0.20 mg/l). But the arsenic level in the waters, sediment of fish culture ponds and in fish flesh of sewage-fed fisheries of Kolkata was below the maximum limit. So, till date there is no threat from arsenic pollution to the sewage-fed fisheries of Kolkata.

Tailored sustainability assessment for urban masterplanning

Tailored sustainability assessment represents one approach to addressing sustainability issues on large-scale urban projects with varying geographical, social and political constraints and diverse incentives among stakeholders. This paper examines the value and limitations of this approach. Three case studies of tailored systems developed by the authors for three unique masterplanning projects are discussed in terms of: contextual sustainability drivers; nature and evolution of systems developed; outcomes of implementation; and overall value delivered. Analysis Leads to conclusions on the key features of effective tailored assessment, the value of tailored sustainability assessment from various perspectives (including client, designer, end-users and the environment), and the limitations of tailored assessment as a tool for comparative analysis between projects. Although systems considered here are specific to individual projects and developed commercially, the challenges and lessons learned are relevant to a range of sustainability assessment approaches developed under different conditions.

Microbiological evaluation and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed

Livestock sewage has been utilized for fish culture. There is lack of information on microbiological evaluation and keeping quality of these fishes. This paper reveals the incidence, types of micro-organisms and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed. These fishes revealed microbial incidence and keeping quality comparable to other fishes. Initial mesophilic and psychrophilic counts varied from 3.38 to 5.56 and 2.47 to 4.74. On an average, the counts reduced by about 40% after evisceration and washing. Whole as well as washed fishes had refrigerated (8 ± 1°C) life of not more than 4 days. The average psychrophilic and mesophilic counts of ice (0 to 1°C) stored whole fishes up to 10th day varied from 3.66 to 4.81, 4.61 to 5.24 and in eviscerated and washed fishes 2.17 to 3.69 and 2.78 to 4.41. Both remained acceptable till the 10th day. Qualitative study of surface slime and gills revealed presence of Aerobacter (Enterobacter), Aeromonas, Alcaligenes, Bacillus, Clostridia, E. coli, Klebsiella, Micrococci, Proteus and Pseudomonas.

Interactions between building integrated photovoltaics and microclimate in urban environments

BIPV (building integrated photovoltaics) has progressed in the past years and become an element to be considered in city planning. BIPV has significant influence on microclimate in urban environments and the performance of BIPV is also affected by urban climate. The thermal model and electrical performance model of ventilated BIPV are combined to predict PV temperature and PV power output in Tianjin, China. Then, by using dynamic building energy model, the building cooling load for installing BIPV is calculated. A multi-layer model AUSSSM of urban canopy layer is used to assess the effect of BIPV on the Urban Heat Island (UHI). The simulation results show that in comparison with the conventional roof, the total building cooling load with ventilation PV roof may be decreased by 10%. The UHI effect after using BIPV relies on the surface absorptivity of original building. In this case, the daily total PV electricity output in urban areas may be reduced by 13% compared with the suburban areas due to UHI and solar radiation attenuation because of urban air pollution. The calculation results reveal that it is necessary to pay attention to and further analyze interactions between BIPV and microdimate in urban environments to decrease urban pollution, improve BIPV performance and reduce cooling load. Copyright © 2006 by ASME.

Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature. © 2006.

Effect of urban climate on building integrated photovoltaics performance

It is generally recognized that BIPV (building integrated photovoltaics) has the potential to become a major source of renewable energy in the urban environment. The actual output of a PV module in the field is a function of orientation, total irradiance, spectral irradiance, wind speed, air temperature, soiling and various system-related losses. In urban areas, the attenuation of solar radiation due to air pollution is obvious, and the solar spectral content subsequently changes. The urban air temperature is higher than that in the surrounding countryside, and the wind speed in urban areas is usually less than that in rural areas. Three different models of PV power are used to investigate the effect of urban climate on PV performance. The results show that the dimming of solar radiation in the urban environment is the main reason for the decrease of PV module output using the climatic data of urban and rural sites in Mexico City for year 2003. The urban PV conversion efficiency is higher than that of the rural PV system because the PV module temperature in the urban areas is slightly lower than that in the rural areas in the case. The DC power output of PV seems to be underestimated if the spectral response of PV in the urban environment is not taken into account based on the urban hourly meteorological data of Sao Paulo for year 2004. © 2006 Elsevier Ltd. All rights reserved.

Interactions between Building Integrated Photovoltaics and microclimate in urban environments

BIPV(Building Integrated Photovoltaics) has progressed in the past years and become an element to be considered in city planning. BIPV has influence on microclimate in urban environments and the performance of BIPV is also affected by urban climate. The effect of BIPV on urban microclimate can be summarized under the following four aspects. The change of absorptivity and emissivity from original building surface to PV will change urban radiation balance. After installation of PV, building cooling load will be reduced because of PV shading effect, so urban anthropogenic heat also decreases to some extent. Because PV can reduce carbon dioxide emissions which is one of the reasons for urban heat island, BIPV is useful to mitigate this phenomena. The anthropogenic heat will alter after using BIPV, because partial replacement of fossil fuel means to change sensible heat from fossil fuel to solar energy. Different urban microclimate may have various effects on BIPV performance that can be analyzed from two perspectives. Firstly, BIPV performance may decline with the increase of air temperature in densely built areas because many factors in urban areas cause higher temperature than that of the surrounding countryside. Secondly, the change of solar irradiance at the ground level under urban air pollution will lead to the variation of BIPV performance because total solar irradiance usually is reduced and each solar cell has a different spectral response characteristic. The thermal model and performance model of ventilated BIPV according to actual meteorologic data in Tianjin(China) are combined to predict PV temperature and power output in the city of Tianjin. Then, using dynamic building energy model, cooling load is calculated after BIPV installation. The calculation made based in Tianjin shows that it is necessary to pay attention to and further analyze interaction between them to decrease urban pollution, improve BIPV Performance and reduce colling load. Copyright © 2005 by ASME.

Specifying a hydraulic regenerative braking system for an articulated urban delivery vehicle

Previous research has shown that hydraulic systems offer potentially the lightest and smallest regenerative braking technology for heavy goods vehicles. This paper takes the most practical embodiment of a hydraulic system for an articulated urban delivery vehicle and investigates the best specification for the various components, based on a simulated stop-start cycle. The potential energy saving is quantified. © 2011 IEEE.

Energy use of buildings at urban scale: A case study of london school buildings

The diversity of non-domestic buildings at urban scale poses a number of difficulties to develop building stock models. This research proposes an engineering-based bottom-up stock model in a probabilistic manner to address these issues. School buildings are used for illustrating the application of this probabilistic method. Two sampling-based global sensitivity methods are used to identify key factors affecting building energy performance. The sensitivity analysis methods can also create statistical regression models for inverse analysis, which are used to estimate input information for building stock energy models. The effects of different energy saving measures are analysed by changing these building stock input distributions.