Molecular Genetic Basis of Opposite Gene by Environment Interactions in Reading Disability and Attention Deficit/Hyperactivity Disorder

The goal of this study is to better understand the genetic basis of Reading Disability (RD) and Attention Deficit Hyperactivity Disorder (ADHD) by examining molecular G x E interactions with parental education for each disorder. Research indicates that despite sharing genetic risk factors, RD and ADHD are influenced by different types of G x E interactions with parental education - a diathesis stress interaction in the case of ADHD and a bioecological interaction in RD. In order to resolve this apparent paradox, we conducted a preliminary study using behavioral genetic methods to test for G x E interactions in RD and the inattentive subtype of ADHD (ADHD-I) in the same sample of monozygotic and dizygotic Colorado Learning Disabilities Research Center same-sex twin pairs (DeFries et al., 1997), and our findings were consistent with the literature. We posited a genetic hypothesis for this opposite pattern of interactions, which suggests that only genes specific to each disorder enter into these opposite interactions, not the shared genes underlying their comorbidity. This study sought to further investigate this paradox using molecular genetics methods. We examined multiple candidate genes identified for RD or related language phenotypes and those identified for ADHD for G x E interactions with parental education. The specific aims of this study were as follows: 1) partition known risk alleles for RD and/or related language phenotypes and ADHD-I into those which are pleiotropic and non-pleiotropic by testing each risk allele for association with both RD and ADHD-I, 2) explore the main effects of parental education on both RD and ADHD-I, 3) address G-E correlations, and 4) conduct exploratory G x E interaction analyses in order to test the genetic hypothesis. Analyses suggested a number of pleiotropic genes that influence both RD and ADHD; however, results did not remain after correcting for multiple comparisons. Although exploratory G x E interaction findings were not significant after multiple comparison correction, results suggested a G x E interaction in the bioecological direction with KIAA0319, parental education, and ADHD-I. Given the limited power in the current study, replication of these findings with larger samples is necessary.

Propriedades mecânicas e térmicas de nanocompósito híbrido de polipropileno com adição de argila e celulose proveniente de papel descartado.

Este trabalho aborda o estudo do comportamento mecânico e térmico do nanocompósito híbrido de polipropileno com uma argila brasileira bentonítica do Estado da Paraíba (PB), conhecida como \"chocolate\" com concentração de 1, 2 e 5 % em massa com a adição de 1 e 2 % em massa de celulose proveniente de papel descartado. Foi utilizado nesse nanocompósito o agente compatibilizante polipropileno graftizado com anidrido maleico PP-g-AM com 3 % de concentração em massa, através da técnica de intercalação do fundido utilizando uma extrusora de dupla-rosca e, em seguida, os corpos de prova foram confeccionados em uma injetora. O comportamento mecânico foi avaliado pelos ensaios de tração, flexão e impacto. O comportamento térmico foi avaliado pelas técnicas de calorimetria exploratória diferencial (DSC) e termogravimetria (TGA). A morfologia dos nanocompósitos foi estudada pela técnica de microscopia eletrônica de varredura (MEV). A argila, a celulose e os nanocompósitos híbridos foram caracterizados por difração de raios X (DRX), fluorescência de raios X (FRX) e espectroscopia no infravermelho (FTIR). Nos ensaios mecânicos de tração houve um aumento de 11 % na tensão máxima em tração e 15 % no módulo de Young, para o nanocompósito com argila, PPA 5 %. No ensaio de impacto Izod, o nanocompósito com argila, PPA 2 % obteve um aumento de 63 % na resistência ao impacto. Para o nanocompósito híbrido PPAC 1 % houve aumento de 8 % na tensão máxima em tração e para o nanocompósito híbrido PPAC 2 % houve aumento de 14 % na resistência ao impacto.

Transferência transplacentária de anticorpos em gestações gemelares

Há poucos dados na literatura sobre o transporte transplacentário de imunoglobulinas em gestações múltiplas. O objetivo deste estudo foi observar fatores que influenciam a concentração de imunoglobulina G (IgG) no cordão umbilical dos neonatos e a transferência transplacentária de IgG total e de IgG contra o Streptococcus grupo B (EGB), e lipopolissacarídeos (LPS) de Klebsiella spp. e Pseudomonas spp.. Métodos: estudo prospectivo realizado no Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo no período de 2012 a 2013. Foram coletadas amostras de sangue materno e de cordão umbilical no momento do parto. Os critérios de inclusão foram gestações gemelares com ausência de sinais de infecção por HIV, citomegalovírus, Hepatites B e C, toxoplasmose e rubéola e ausência de doenças autoimunes, malformação fetal e síndromes genéticas. A análise multivariada foi realizada para avaliar a associação entre os níveis de IgG em cordão umbilical e as taxas de transferência de anticorpos com a concentração materna de IgG, a corionicidade da gestação, a presença de insuficiência placentária, a restrição de crescimento intrauterino, a idade gestacional de nascimento, o peso de nascimento, o tabagismo, a doença materna e a via de parto. Resultados: a concentração de IgG total em cordão umbilical apresentou correlação positiva com os níveis maternos séricos de IgG total e a idade gestacional do parto. Os níveis de IgG total em cordão umbilical foram significativamente menores em gestações monocoriônicas quando comparadas às dicoriônicas. A taxa de transferência de IgG total apresentou correlação positiva com a idade gestacional do parto, mas negativa com as concentrações maternas de IgG total. As concentrações de IgG contra EGB e LPS de Klebsiella spp. e Pseudomonas spp. apresentaram associação com os níveis maternos de IgG específicos contra esses antígenos e com o diabetes. Os níveis de IgG contra LPS de Klebsiella spp. também foram associados com o peso de nascimento e com hipertensão materna. As taxas de transferência de IgG contra EGB e LPS de Pseudomonas spp. apresentaram correlação com os níveis maternos de IgG específicos contra os antígenos referidos. A taxa de transferência de IgG contra EGB também esteve associada com a idade gestacional do parto, enquanto a taxa de transferência de IgG contra LPS de Pseudomonas spp. apresentou correlação com diabetes. Não houve correlação entre a taxa de transferência de IgG contra a LPS de Klebsiella spp. com nenhum fator analisado. Conclusão: em gestações gemelares, a concentração total de IgG em cordão umbilical foi influenciada pela concentração materna de IgG total, pela idade gestacional do parto e pela corionicidade placentária. As concentrações de IgG total foram significativamente menores em gestações monocoriônicas que em dicoriônicas. As concentrações séricas de IgG contra EGB e LPS de Klebsiella spp. e Pseudomonas spp. em cordão umbilical apresentaram associação com os níveis maternos de IgG específicos contra esses antígenos e com a presença de diabetes. Todos os outros parâmetros estudados apresentaram diferentes associações com as concentrações de IgG e com as taxas de transferências de IgG específicas contra cada antígeno investigado

Correlação entre microestrutura e comportamento de corrosão em duas ligas do sistema Al-Fe-Si produzidas pelos processos industriais de lingotamento contínuo e semi-contínuo.

As chapas de ligas de alumínio trabalháveis são produzidas atualmente por dois processos, o método de vazamento contínuo conhecido TRC (Twin Roll Continous Casting) ou pelo método tradicional de vazamento de placas DC (Direct Chill). A fabricação de ligas de alumínio pelos dois processos confere características microestruturais diferentes quando comparadas entre si, o que se reflete em suas propriedades. Além disto, ocorrem variações microestruturais ao longo da espessura, especialmente nas chapas produzidas pelo processo TRC. Neste sentido, é importante estudar a evolução microestrutural que ocorre durante o seu processamento e sua influência com relação à resistência à corrosão. Dessa forma foi realizado neste trabalho um estudo comparativo do comportamento de corrosão, bem como das microestruturas do alumínio de alta pureza AA1199 (99,995% Al) e das ligas de alumínio AA1050 (Fe+Si0,5%) e AA4006 (Fe+Si1,8%) produzidas pelos processos industriais de lingotamento contínuo e semi-contínuo. Os resultados obtidos evidenciaram que as microestruturas das ligas AA4006 DC e AA4006 TRC são distintas, sendo observada maior fração volumétrica dos precipitados na liga fabricada pelo processo TRC comparativamente ao DC. Para caracterizar o comportamento de corrosão foram realizados ensaios de Espectroscopia de Impedância Eletroquímica e Polarização Potenciodinâmica, que mostraram a maior resistência à corrosão localizada para a liga fabricada pelo processo TRC em comparação ao processo DC. Além disso, foi verificada, em ordem decrescente, uma maior resistência à corrosão do alumínio AA1050, seguida pela superfície da liga AA4006 e por fim, pelo centro da chapa desta última. Os resultados obtidos por espectroscopia de impedância eletroquímica para as ligas AA4006 fabricadas pelo processo TRC apresentaram melhor desempenho que o processo DC, principalmente em intervalos de 2 a 12 horas de imersão na solução de sulfato de sódio contaminada com íons cloreto. Para tempos de imersão acima de 4 horas foi observado comportamento indutivo em baixas frequências para os dois tipos de processamento investigados, o que foi associado à adsorção de espécies químicas, principalmente íons sulfato e oxigênio, na interface metal/óxido. As curvas de polarização anódica mostraram maior resistência à corrosão localizada para a liga fabricada pelo processo viii TRC em comparação ao processo DC. Este comportamento foi associado às diferentes características microestruturais, observadas para liga AA4006 obtida pelos dois processos.

Comparison of Reading Development Across Socioeconomic Status in the United States

It is well known that higher parental socioeconomic status (SES) predicts better child reading outcomes, but little work has been done to unpack this finding. The main overall question addressed by this project was whether cognitive models of the two main reading outcomes, single word reading (SWR) and reading comprehension (RC), performed similarly across levels of parental SES. The current study predicted a differential relation between parental SES and both predictors and outcomes because of the known large relation between parental SES and child oral language development. Three questions examined the mediating effects of cognitive predictors on the relation between parental SES and reading outcomes, the moderating effects of SES on the developmental trajectories of reading outcomes, and the strength of the relationship between SES and the two reading outcomes. Participants were part of two large and comprehensive datasets: the cross-sectional Colorado Learning Disability Research Center (CLDRC; n=1554) sample, and the International Longitudinal Twin Study (ILTS; n=463 twin pairs) sample. In terms of cognitive predictors, the relation between SES and SWR was disproportionately mediated by two language skills, vocabulary (VOC) and phonological awareness (PA). For the RC models, both SWR and oral listening comprehension (OLC) did not disproportionally mediate the relation between RC and SES; however, full mediation was not exhibited. With regard to the trajectory of reading outcomes, SES moderated the starting values of SWR and RC, and the slopes of SWR development. When performance on the control measures of early reading skills (e.g., print knowledge, vocabulary, and decoding skills) was included the models, the moderating effects of SES were completely accounted for by these measures. In terms of outcomes, SES had a stronger relation to RC than to SWR, especially at later ages. These findings have implications for interventions aimed at improving reading outcomes in children from lower SES families.

On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems.

The present thesis is focused on the development of a thorough mathematical modelling and computational solution framework aimed at the numerical simulation of journal and sliding bearing systems operating under a wide range of lubrication regimes (mixed, elastohydrodynamic and full film lubrication regimes) and working conditions (static, quasi-static and transient conditions). The fluid flow effects have been considered in terms of the Isothermal Generalized Equation of the Mechanics of the Viscous Thin Films (Reynolds equation), along with the massconserving p-Ø Elrod-Adams cavitation model that accordingly ensures the so-called JFO complementary boundary conditions for fluid film rupture. The variation of the lubricant rheological properties due to the viscous-pressure (Barus and Roelands equations), viscous-shear-thinning (Eyring and Carreau-Yasuda equations) and density-pressure (Dowson-Higginson equation) relationships have also been taken into account in the overall modelling. Generic models have been derived for the aforementioned bearing components in order to enable their applications in general multibody dynamic systems (MDS), and by including the effects of angular misalignments, superficial geometric defects (form/waviness deviations, EHL deformations, etc.) and axial motion. The bearing exibility (conformal EHL) has been incorporated by means of FEM model reduction (or condensation) techniques. The macroscopic in fluence of the mixedlubrication phenomena have been included into the modelling by the stochastic Patir and Cheng average ow model and the Greenwood-Williamson/Greenwood-Tripp formulations for rough contacts. Furthermore, a deterministic mixed-lubrication model with inter-asperity cavitation has also been proposed for full-scale simulations in the microscopic (roughness) level. According to the extensive mathematical modelling background established, three significant contributions have been accomplished. Firstly, a general numerical solution for the Reynolds lubrication equation with the mass-conserving p - Ø cavitation model has been developed based on the hybridtype Element-Based Finite Volume Method (EbFVM). This new solution scheme allows solving lubrication problems with complex geometries to be discretized by unstructured grids. The numerical method was validated in agreement with several example cases from the literature, and further used in numerical experiments to explore its exibility in coping with irregular meshes for reducing the number of nodes required in the solution of textured sliding bearings. Secondly, novel robust partitioned techniques, namely: Fixed Point Gauss-Seidel Method (PGMF), Point Gauss-Seidel Method with Aitken Acceleration (PGMA) and Interface Quasi-Newton Method with Inverse Jacobian from Least-Squares approximation (IQN-ILS), commonly adopted for solving uid-structure interaction problems have been introduced in the context of tribological simulations, particularly for the coupled calculation of dynamic conformal EHL contacts. The performance of such partitioned methods was evaluated according to simulations of dynamically loaded connecting-rod big-end bearings of both heavy-duty and high-speed engines. Finally, the proposed deterministic mixed-lubrication modelling was applied to investigate the in fluence of the cylinder liner wear after a 100h dynamometer engine test on the hydrodynamic pressure generation and friction of Twin-Land Oil Control Rings.

Estudo da blenda PBAT/PLA com cargas.

Neste trabalho compósitos foram obtidos a partir da blenda comercial 100% biodegradável Ecovio® C2224 da BASF, uma blenda formada por 55% em massa de um copoliéster biodegradável, o Ecoflex® (poli[(adipato de butileno)-co-(tereftalato de butileno)]) e 45% em massa de PLA poli(ácido láctico). Como carga, utilizaram-se dois tipos de argilas comerciais do grupo das esmectitas, ambas predominantemente montmorilonitas: Cloisite Sódica® e Cloisite 30B®. Também foi utilizado como carga a sílica coloidal comercial Aerosil 200®, com área superficial de 200 m2/g e diâmetro médio de partícula 12nm. Os compósitos estudados, ambos contendo 5% e 10% em massa de cargas, foram preparados em uma extrusora de rosca dupla, acoplada a um reômetro de torque. O estudo foi dividido em três etapas: 1ª) etapa: Obtenção e caracterização dos compósitos de Ecovio®/ argila e Ecovio® / sílica; 2ª) etapa: Avaliação da fotodegradação do Ecovio® puro e dos compósitos obtidos; 3ª) etapa: Avaliação da biodegradabilidade do Ecovio® puro e dos compósitos após exposição em câmara de UV. As propriedades mecânicas dos compósitos antes e depois de serem submetidos à exposição em câmara de UV foram avaliadas por ensaios de resistência à tração e resistência ao impacto Izod. Os resultados obtidos na 1ª etapa deste trabalho indicaram aumento nos valores de módulo de elasticidade de todos os compósitos, em relação à blenda pura. Destacam-se as composições com 5% e 10% em massa de sílica coloidal, que apresentaram aumentos de até 115% nos valores de módulo de elasticidade, sem perdas significativas em resistência à tração, alongamento e resistência ao impacto, quando comparadas à fase matriz. Na 2ª etapa, a partir de 20 dias de exposição, todas as composições (blendas e compósitos) apresentam redução nas propriedades mecânicas em função do aumento do tempo de exposição à radiação UV. Na 3ª etapa, independente do tipo ou teor de carga presente na blenda, todas as composições apresentaram índices de biodegradabilidade, depois de 120 dias, de 40 a 60%, devido à prévia exposição à radiação UV.

Sustainable Development and its Discontents

Sustainable development (or sustainability) is a decision-making framework for maintaining and achieving human well-being, both in the present and into the future. The framework requires both consideration and achievement of environmental protection, social justice and economic development. In that framework, environmental protection must be integrated into decisions about social and economic development, and social justice and economic viability must be integrated into decisions about environmental quality. First endorsed by the world’s nations in 1992, this framework is intended to provide an effective response to the twin global challenges of growing environmental degradation and widespread extreme poverty. Sustainability provides a framework for humans to live in harmony with nature, rather than at nature’s expense. It may therefore be one of the most important ideas to come out of the 20th century. In the last two decades, the framework has become a touchstone in nearly every economic sector and at every level of government, unleashing an extraordinary range of creativity in all of those realms. Sustainable development is having a significant effect on the practice of law and on the way in which laws are written and implemented. Understanding the framework is increasingly important for law makers and lawyers. As sustainable development (or sustainability) has grown in prominence, its critics have become more numerous and more vocal. Three major lines of criticism are that the term is “too boring” to command public attention, “too vague” to provide guidance, and “too late” to address the world’s problems. Critics suggest goals such as abundance, environmental integrity, and resilience. Beginning with the international agreements that shaped the concept of sustainable development, this Article provides a functional and historical analysis of the meaning of sustainable development. It then analyzes and responds to each of these criticisms in turn. While the critics, understood constructively, suggest ways of strengthening this framework, they do not provide a compelling alternative. The challenge for lawyers, law makers, and others is to use and improve this framework to make better decisions.

A massive association around the obscured open cluster RSGC3

Context. Four clusters of red supergiants have been discovered in a region of the Milky Way close to base of the Scutum-Crux Arm and the tip of the Long Bar. Population synthesis models indicate that they must be very massive to harbour so many supergiants. If the clusters are physically connected, this Scutum Complex would be the largest and most massive star-forming region ever identified in the Milky Way. Aims. The spatial extent of one of these clusters, RSGC3, has not been investigated. In this paper we explore the possibility that a population of red supergiants could be located in its vicinity. Methods. We utilised 2MASS JHKS photometry to identify candidate obscured luminous red stars in the vicinity of RSGC3. We observed a sample of candidates with the TWIN spectrograph on the 3.5-m telescope at Calar Alto, obtaining intermediate-resolution spectroscopy in the 8000−9000 Å range. We re-evaluated a number of classification criteria proposed in the literature for this spectral range and found that we could use our spectra to derive spectral types and luminosity classes. Results. We measured the radial velocity of five members of RSGC3, finding velocities similar to the average for members of Stephenson 2. Among the candidates observed outside the cluster, our spectra revealed eight M-type supergiants at distances <18′ from the centre of RSGC3, distributed in two clumps. The southern clump is most likely another cluster of red supergiants, with reddening and age identical to RSGC3. From 2MASS photometry, we identified four likely supergiant members of the cluster in addition to the five spectroscopically observed. The northern clump may be a small cluster with similar parameters. Photometric analysis of the area around RSGC3 suggests the presence of a large (>30) population of red supergiants with similar colours. Conclusions. Our data suggest that the massive cluster RSGC3 is surrounded by an extended association, which may be very massive ( ≳ 105 M⊙). We also show that supergiants in the Scutum Complex may be characterised via a combination of 2MASS photometry and intermediate-to-high-resolution spectroscopy in the Z band.

IRAS 18357-0604 – an analogue of the galactic yellow hypergiant IRC +10420?

Context. Yellow hypergiants represent a short-lived evolutionary episode experienced by massive stars as they transit to and from a red supergiant phase. As such, their properties provide a critical test of stellar evolutionary theory, while recent observations unexpectedly suggest that a subset may explode as Type II supernovae. Aims. The galactic yellow hypergiant IRC +10420 is a cornerstone system for understanding this phase since it is the strongest post-RSG candidate known, has demonstrated real-time evolution across the Hertzsprung-Russell diagram and been subject to extensive mass loss. In this paper we report on the discovery of a twin of IRC +10420 - IRAS 18357-0604. Methods. Optical and near-IR spectroscopy are used to investigate the physical properties of IRAS 18357-0604 and also provide an estimate of its systemic velocity, while near- to mid-IR photometry probes the nature of its circumstellar environment. Results. These observations reveal pronounced spectral similarities between IRAS 18357-0604 and IRC +10420, suggesting comparable temperatures and wind geometries. IR photometric data reveals a similarly dusty circumstellar environment, although historical mass loss appears to have been heavier in IRC +10420. The systemic velocity implies a distance compatible with the red supergiant-dominated complex at the base of the Scutum Crux arm; the resultant luminosity determination is consistent with a physical association but suggests a lower initial mass than inferred for IRC +10420 (≲20 M⊙ versus ~40 M⊙). Evolutionary predictions for the physical properties of supernova progenitors derived from ~18–20 M⊙ stars – or ~12–15 M⊙ stars that have experienced enhanced mass loss as red supergiants – compare favourably with those of IRAS 18357-0604, which in turn appears to be similar to the the progenitor of SN2011dh; it may therefore provide an important insight into the nature of the apparently H-depleted yellow hypergiant progenitors of some Type IIb SNe.

Coagent Modified Polypropylene Prepared by Reactive Extrusion: A New Look Into the Structure-Property Relations of Injection Molded Parts

Peroxide-mediated reactive extrusion of linear isotactic polypropylene (L-PP) was conducted in the presence of trimethylolpropane trimethacrylate (TMPTMA) and triallyl trimesate (TAM) coagents, using a twin screw extruder. The resulting coagent-modified polypropylenes (CM-PP) had higher viscosities and elasticities, as well as increased crystallization temperature compared to PP reacted only with peroxide (DCP-PP). Additionally, deviations from terminal flow, and strain hardening were observed in PP modified with TAM, signifying the presence of long chain branching (LCB). The CM-PP formulations retained the modulus and tensile strength of the parent L-PP, in spite of their lower molar mass and viscosities, whereas their elongation at break and the impact strength were better. This was attributed to the finer spherulitic structure of these materials, and to the disappearance of the skin-core layer in the injection molded specimens.

Soluções globais para sistemas industriais-teste de software

Relatório de estágio apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Sistemas de Informação Organizacionais