M Dwarf Flare Continuum Variations on One-second Timescales: Calibrating and Modeling of ULTRACAM Flare Color Indices

We present a large data set of high-cadence dMe flare light curves obtained with custom continuum filters on the triple-beam, high-speed camera system ULTRACAM. The measurements provide constraints for models of the near-ultraviolet (NUV) and optical continuum spectral evolution on timescales of ≈1 s. We provide a robust interpretation of the flare emission in the ULTRACAM filters using simultaneously obtained low-resolution spectra during two moderate-sized flares in the dM4.5e star YZ CMi. By avoiding the spectral complexity within the broadband Johnson filters, the ULTRACAM filters are shown to characterize bona fide continuum emission in the NUV, blue, and red wavelength regimes. The NUV/blue flux ratio in flares is equivalent to a Balmer jump ratio, and the blue/red flux ratio provides an estimate for the color temperature of the optical continuum emission. We present a new “color-color” relationship for these continuum flux ratios at the peaks of the flares. Using the RADYN and RH codes, we interpret the ULTRACAM filter emission using the dominant emission processes from a radiative-hydrodynamic flare model with a high nonthermal electron beam flux, which explains a hot, T ≈ 104 K, color temperature at blue-to-red optical wavelengths and a small Balmer jump ratio as observed in moderate-sized and large flares alike. We also discuss the high time resolution, high signal-to-noise continuum color variations observed in YZ CMi during a giant flare, which increased the NUV flux from this star by over a factor of 100. Based on observations obtained with the Apache Point Observatory 3.5 m telescope, which is owned and operated by the Astrophysical Research Consortium, based on observations made with the William Herschel Telescope operated on the island of La Palma by the Isaac Newton Group in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofsica de Canarias, and observations, and based on observations made with the ESO Telescopes at the La Silla Paranal Observatory under programme ID 085.D-0501(A).

O papel do técnico oficial de contas na elaboração dos relatórios de sustentabilidade:um estudo aplicado às maiores empresas portuguesas

Dissertação, Mestrado, Contabilidade e Finanças, Instituto Politécnico de Santarém, Escola Superior de Gestão e Tecnologia, 2014

Bicontactual hypermaps

Esta tese dedica-se ao estudo de hipermapas regulares bicontactuais, hipermapas com a propriedade que cada hiperface contacta só com outras duas hiperfaces. Nos anos 70, S. Wilson classificou os mapas bicontactuais e, em 2003, Wilson e Breda d’Azevedo classificaram os hipermapas bicontactuais no caso não-orientável. Quando esta propriedade é transferida para hipermapas origina três tipos de bicontactualidade, atendendo ao modo como as duas hiperfaces aparecem à volta de uma hiperface fixa: edge-twin, vertextwin and alternate (dois deles são o dual um do outro). Um hipermapa topológico é um mergulho celular de um grafo conexo trivalente numa superfície compacta e conexa tal que as células são 3-coloridas. Ou de maneira mais simples, um hipermapa pode ser visto como um mapa bipartido. Um hipermapa orientado regular é um triplo ordenado consistindo num conjunto finito e dois geradores, que são permutações (involuções) do conjunto tal que o grupo gerado por eles, chamado o grupo de monodromia, actua regularmente no conjunto. Nesta tese, damos uma classificação de todos os hipermapas orientados regulares bicontactuais e, para completar, reclassificamos, usando o nosso método algébrico, os hipermapas não-orientáveis bicontactuais.

Petrologic and geochemical characterization of São Jorge island volcanism, Azores

The island of São Jorge (38º 45’ 24’’ N - 28º 20’ 44’’W and 38º 33’ 00’’ N - 27º 44’ 32’’ W) is one of the nine islands of the Azores Archipelago that is rooted in the Azores Plateau, a wide and complex region which encompasses the triple junction between the American, Eurasia and Nubia plates. São Jorge Island has grown by fissural volcanic activity along fractures with the regional WNW-ESE trend, unveiling the importance of the regional tectonics during volcanic activity. The combination of the volcanostratigraphy (Forjaz & Fernandes, 1975; and Madeira, 1998) with geochronological data evidences that the island developed during two main volcanic phases. The first subaerial phase that occurred between 1.32 and 1.21 Ma ago (Hildenbrand et al. 2008) is recorded on the lava sequence forming the cliff at Fajã de São João, while the second phase started at 757 ka ago, is still active, and edified the rest of the island. This second phase edified the east side of the island that corresponds to Topo Volcanic Complex, in the period between 757 and 543 ka ago, while the west side named Rosais Volcanic Complex, started at 368 ka ago (Hildenbrand et al. 2008) and was still active at 117 ka ago. After the onset of Rosais, volcanic activity migrates to the center of São Jorge edifying Manadas Volcanic Complex. The volcanism on São Jorge is dominantly alkaline, with a narrow lithological composition ranging between the basanites/tefrites through the basaltic trachyandesites, in spite of this the two volcanic phases show distinct mineralogical, petrographic and geochemical characteristics that should be related with different petrogenetic conditions and growth rates of the island. Abstract viii During the first volcanic phase, growth rates are faster (≈3.4 m/ka), the lavas are slightly less alkaline and plagioclase-richer, pointing to the existence of a relative shallow and dynamic magma chamber where fractional crystallization associated with gravitational segregation and accumulation processes, produced the lavas of Fajã de São João sequence. The average growth rates during the second volcanic phase are lower (≈1.9 m/ka) and the lavas are mainly alkaline sodic, with a mineralogy composed by olivine, pyroxene, plagioclase and oxide phenocrysts, in a crystalline groundmass. The lavas are characterized by enrichment in incompatible trace element and light REE, but show differences for close-spaced lavas that unveil, in some cases, slight different degrees of fertilization of the mantle source along the island. These differences might also result from higher degrees of partial melting, as observed in the early stages of Topo and Rosais volcanic complexes, of a mantle source with residual garnet and amphibole, and/or from changing melting conditions of the mantle source as pressure. The subtle geochemical differences of the lavas contrast with the isotopic signatures, obtained from Sr-Nd-Pb-Hf isotopes, that São Jorge Island volcanism exhibit along its volcanic complexes. The lavas from Topo Volcanic Complex and from the submarine flank, i.e. the lavas located east of Ribeira Seca Fault, sample a mantle source with similar isotopic signature that, in terms of lead, overlaps Terceira Island. The lavas from Rosais and Manadas volcanic complexes, the western lavas, sample a mantle source that becomes progressively more distinct towards the west end of the island and that, in terms of lead isotopes, trends towards the isotopic composition of Faial Island. The two isotopic signatures of São Jorge, observed from the combination of lead isotopes with the other three systems, seem to result from the mixing of three distinct end-members. These end-members are (1) the common component related with the Azores Plateau and the MAR, (2) the eastern component with a FOZO signature and possibly related with the Azores plume located beneath Terceira, and (3) the western component, similar to Faial, where the lithosphere could have been entrained by an ancient magmatic liquid, isolated for a period longer than 2Ga. The two trends observed in the island reinforce the idea of small-scale mantle heterogeneities beneath the Azores region, as it has been proposed to explain the isotopic diversity observed in the Archipelago.

Hole-type gaseous detectors for medical imaging and HEP experiments

This work presents the results on the development of a high pressure Xe gaseous detector envisaging medical imaging. The detector uses two VUV photosensors operating face-to-face, based on the CsI-MHSP with position discrimination capability. The known effect of the charge gain decrease with the gas pressure is compensated with a light gain using the electroluminescence process. Studies of signal amplitude, energy and position resolution are presented. On the second part, gaseous detectors based on THGEM where studied in order to fulfill the requirements of present and future high energy physics experiments. The work is focused on the application of THGEM in RICH detectors elements: a triple THGEM detector using CsI photocathodes in Ne mixtures was suggested. The ion backflow to the photocathode remains a concern and a limitation; to minimize it, the application of a new hole-structure, THCOBRA, was suggested. Preliminary results foresee good perspectives for the successful application of THCOBRA in ion back-flow suppression. This work contains several methods and measurements of the CsI photocathodes behaviour in radiation gaseous detectors. A long discussion on its issues and possible solutions are presented.

Smart design of scaffolds obtained by biofabrication for tissue engineering applications

A engenharia de tecidos é um domínio tecnológico emergente em rápido desenvolvimento que se destina a produzir substitutos viáveis para a restauração, manutenção ou melhoria da função dos tecidos ou órgãos humanos. Uma das estratégias mais predominantes em engenharia de tecidos envolve crescimento celular sobre matrizes de suporte (scaffolds), biocompatíveis e biodegradáveis. Estas matrizes devem possuir não só elevadas propriedades mecânicas e vasculares, mas também uma elevada porosidade. Devido à incompatibilidade destes dois parâmetros, é necessário desenvolver estratégias de simulação de forma a obter estruturas optimizadas. A previsão real das propriedades mecânicas, vasculares e topológicas das matrizes de suporte, produzidas por técnicas de biofabricação, é muito importante para as diversas aplicações em engenharia de tecidos. A presente dissertação apresenta o estado da arte da engenharia de tecidos, bem como as técnicas de biofabricação envolvidas na produção de matrizes de suporte. Para o design optimizado de matrizes de suporte foi adoptada uma metodologia de design baseada tanto em métodos de elementos finitos para o cálculo do comportamento mecânico, vascular e as optimizações topológicas, como em métodos analíticos para a validação das simulações estruturais utilizando dados experimentais. Considerando que as matrizes de suporte são estruturas elementares do tipo LEGO, dois tipos de famílias foram consideradas, superfícies não periódicas e as superfícies triplas periódicas que descrevem superfícies naturais. Os objectivos principais desta dissertação são: i) avaliar as técnicas existentes de engenharia de tecidos; ii) avaliar as técnicas existentes de biofabricação para a produção de matrizes de suporte; iii) avaliar o desempenho e comportamento das matrizes de suporte; iv) implementar uma metodologia de design de matrizes de suporte em variáveis tais como a porosidade, geometria e comportamento mecânico e vascular por forma a auxiliar o processo de design; e por fim, v) validar experimentalmente a metodologia adoptada.

Extension of electrochemically active sites in SOFCs and SOECs

Solid oxide fuel (SOFCs) and electrolyzer (SOECs) cells have been promoted as promising technologies for the stabilization of fuel supply and usage in future green energy systems. SOFCs are devices that produce electricity by the oxidation of hydrogen or hydrocarbon fuels with high efficiency. Conversely, SOECs can offer the reverse reaction, where synthetic fuels can be generated by the input of renewable electricity. Due to this similar but inverse nature of SOFCs and SOECs, these devices have traditionally been constructed from comparable materials. Nonetheless, several limitations have hindered the entry of SOFCs and SOECs into the marketplace. One of the most debilitating is associated with chemical interreactions between cell components that can lead to poor longevities at high working temperatures and/or depleted electrochemcial performance. Normally such interreactions are countered by the introduction of thin, purely ionic conducting, buffer layers between the electrode and electrolyte interface. The objective of this thesis is to assess if possible improvements in electrode kinetics can also be obtained by modifying the transport properties of these buffer layers by the introduction of multivalent cations. The introduction of minor electronic conductivity in the surface of the electrolyte material has previously been shown to radically enhance the electrochemically active area for oxygen exchange, reducing polarization resistance losses. Hence, the current thesis aims to extend this knowledge to tailor a bi-functional buffer layer that can prevent chemical interreaction while also enhancing electrode kinetics.The thesis selects a typical scenario of an yttria stabilized zirconia electrolyte combined with a lanthanide containing oxygen electrode. Gadolinium, terbium and praseodymium doped cerium oxide materials have been investigated as potential buffer layers. The mixed ionic electronic conducting (MIEC) properties of the doped-cerium materials have been analyzed and collated. A detailed analysis is further presented of the impact of the buffer layers on the kinetics of the oxygen electrode in SOFC and SOEC devices. Special focus is made to assess for potential links between the transport properties of the buffer layer and subsequent electrode performance. The work also evaluates the electrochemical performance of different K2NiF4 structure cathodes deposited onto a peak performing Pr doped-cerium buffer layer, the influence of buffer layer thickness and the Pr content of the ceria buffer layer. It is shown that dramatic increases in electrode performance can be obtained by the introduction of MIEC buffer layers, where the best performances are shown to be offered by buffer layers of highest ambipolar conductivity. These buffer layers are also shown to continue to offer the bifunctional role to protect from unwanted chemical interactions at the electrode/electrolyte interface.

Interrelation entre déficits métaboliques et neuropathologie associée à la maladie d’Alzheimer chez la souris 3xTg-AD

La maladie d’Alzheimer (MA) est la maladie neurodégénérative qui cause le plus important nombre de cas de démence. On estime que près de 15% des canadiens âgés de plus de 65 ans sont atteints de la MA. Avec le vieillissement de la population, le nombre de cas augmentera de manière substantielle dans les prochaines années. À l’heure actuelle, aucun traitement ne permet de ralentir la progression de la maladie. Pour plus de 99% des cas, ses causes exactes demeurent indéterminées. Toutefois, de nombreux facteurs de risque ont été identifiés. Parmi eux, on retrouve plusieurs facteurs liés au métabolisme énergétique dont l’obésité et le diabète de type 2 (DT2). De manière intéressante, des modifications du métabolisme, telles qu’une résistance à l’insuline centrale et périphérique, sont également observées chez les patients Alzheimer. Afin de mieux comprendre l’interaction entre le DT2 et la MA, nous avons d’abord étudié les altérations métaboliques chez la souris triple transgénique (3xTg-AD), un modèle murin de la MA. Nous avons, en premier lieu, observé une intolérance au glucose qui progresse avec l’âge, qui est plus importante chez les femelles et qui semble liée à l’accumulation du peptide beta-amyloïde (Aβ) humain dans le pancréas. Ensuite, nous avons nourri cette souris avec une diète riche en gras pour vérifier l’impact d’une aggravation des déficits métaboliques sur la pathologie Alzheimer. L’aggravation de l’intolérance au glucose chez les souris 3xTg-AD semblait liée à l’atrophie des îlots de Langerhans et, en conséquence, à une réduction de la production d’insuline en réponse à l’injection de glucose. En plus de l’aggravation des déficits métaboliques, la diète riche en gras a augmenté de manière drastique l’accumulation de la forme soluble du peptide Aβ dans le cortex et a déterioré la mémoire des souris 3xTg-AD. De manière intéressante, l’élévation du peptide Aβ et les troubles de la mémoire ont été rétablis par l’administration d’une seule dose d’insuline. Aussi, nous avons observé une augmentation du peptide Aβ dans le plasma 30 minutes à la suite de l’injection d’insuline, suggérant qu’il est possible que la baisse rapide du peptide soit en partie causée par une élévation de la clairance du peptide au cerveau. Ces résultats renforcent les évidences supportant le potentiel thérapeutique de l’insuline dans le traitement de la MA. Toutefois, les résultats chez les patients mettent en lumière l’inefficacité de l’administration intranasale d’insuline chez les porteurs de l’allèle 4 du gène de l’apolipoprotéine E (APOE4). Afin de comprendre les raisons qui expliquent cette différence de réponse à l’insuline chez les porteurs de l’APOE4, nous avons injecté des souris exprimant l’APOE3 et l’APOE4 humain avec de l’insuline dans le but de vérifier l’effet central et périphérique de l’insuline chez ces animaux. Les souris APOE4 montrent une plus importante élévation de la signalisation de l’insuline au cerveau comparativement aux souris APOE3. Cette plus haute réponse est aussi associée à une élévation plus importante de la phosphorylation de la protéine tau, un marqueur neuropathologique de la MA. En somme, ces résultats suggèrent qu’il existe un cercle vicieux entre la MA et le DT2. L’administration d’insuline a un potentiel thérapeutique intéressant pour la MA, malgré des effets limités chez les patients APOE4 en raison de son impact probable sur la phosphorylation de la protéine tau.

Chicanas em busca de território : a herança de Glória Anzaldúa

Tese de doutoramento, Estudos de Literatura e de Cultura (Estudos Americanos), Universidade de Lisboa, Faculdade de Letras, 2015

Control of endosomal Toll-like receptor (TLR) signaling by nanoparticles and applications in cancer therapy

Thesis (Ph.D.)--University of Washington, 2014

Identification of Streptococcus gallolyticus subsp. macedonicus as the etiological agent in a case of culture-negative multivalve infective endocarditis by 16S rDNA PCR analysis of resected valvular tissue

Today, PCR using broad-range primers is being used increasingly to detect pathogens from resected heart valves. Herein is described the first case of multivalve infective endocarditis where 16S rDNA PCR was used to detect a single pathogen from two affected valves in a 61-year-old man. Triple heart valve replacement was required despite six weeks of appropriate antimicrobial therapy. The organism was confirmed as Streptococcus gallolyticus subsp. macedonicus, a member of the 'S. equinus/S. bovis' complex. To date, only one report has been made of human infection due to this organism. This may be due to the limited resolution of the routine diagnostic methods used and/or as a consequence of the complex nomenclature associated with this group of organisms.

MASH structures for bandpass sigma-delta modulators

The paper presents simulation results from investigating the behaviour of multistage (MASH) oversampled bandpass sigma-delta (Σ-Δ) modulators for use in analogue to digital converters for high frequency narrowband applications such as the signals out of the intermediate frequency (IF) section of a superheterodyne radio receiver. The bandpass configurations under consideration have in their loop filter a cascade of second-order resonator structures in order to achieve acceptable noise shaping. The quantisation noise in each stage is suppressed by feeding the error of each section into the input of the following stages. It is demonstrated that the triple effective-first-order bandpass MASH structure has significantly better performance compared with the effective-second-order effective-first-order bandpass MASH structure.

Telaprevir or boceprevir based therapy for chronic hepatitis C infection: Development of resistance-associated variants in treatment failure

The use of triple-therapy, pegylated-interferon, ribavirin and either of the first generation hepatitis C virus (HCV) protease inhibitors telaprevir or boceprevir, is the new standard of care for treating genotype 1 chronic HCV. Clinical trials have shown response rates of around 70–80%, but there is limited data from the use of this combination outside this setting. Through an expanded access programme, we treated 59 patients, treatment naïve and experienced, with triple therapy. Baseline factors predicting treatment response or failure during triple therapy phase were identified in 58 patients. Thirty seven (63.8%) of 58 patients had undetectable HCV RNA 12 weeks after the end of treatment. Genotype 1a (p = 0.053), null-response to previous treatment (p = 0.034), the rate of viral load decline after 12 weeks of previous interferon-based treatment (p = 0.033) were all associated with triple-therapy failure. The most common cause of on-treatment failure for telaprevir-based regimens was the development of resistance-associated variants (RAVs) at amino acids 36 and/or 155 of HCV protease (p = 0.027) whereas in boceprevir-based regimens mutations at amino acid 54 were significant (p = 0.015). SVR12 rates approaching 64% were achieved using triple therapy outside the clinical trial setting, in a patient cohort that included cirrhotics.

Alienation and Digital Labour – a Depth-Hermeneutic Inquiry into Online Commodification and the Unconscious

At the core of this paper is a psychosocial inquiry into the Marxist concept of alienation and its applications to the field of digital labour. Following a brief review of different theoretical works on alienation, it looks into its recent conceptualisations and applications to the study of online social networking sites. Finally, the authors offer suggestions on how to extend and render more complex these recent approaches through in-depth analyses of Facebook posts that exemplify how alienation is experienced, articulated, and expressed online. For this perspective, the article draws on Rahel Jaeggi’s (2005) reassessment of alienation, as well as the depth-hermeneutic method of “scenic understanding” developed by Alfred Lorenzer (e.g. 1970; 1986).