Impacts of uplift of northern Tibetan Plateau and formation of Asian inland deserts on regional climate and environment

Based on the geological evidence that the northern Tibetan Plateau (NTP) had an uplift of a finite magnitude since the Miocene and the major Asian inland deserts formed in the early Pliocene, a regional climate model (RegCM4.1) with a horizontal resolution of 50 km was used to explore the effects of the NTP uplift and the related aridification of inland Asia on regional climate. We designed three numerical experiments including the control experiment representing the present-day condition, the high-mountain experiment representing the early Pliocene condition with uplifted NTP but absence of the Asian inland deserts, and the low-mountain experiment representing the mid-Miocene condition with reduced topography in the NTP (by as much as 2400 m) and also absence of the deserts. Our simulation results indicated that the NTP uplift caused significant reductions in annual precipitation in a broad region of inland Asia north of the Tibetan Plateau (TP) mainly due to the enhanced rain shadow effect of the mountains and changes in the regional circulations. However, four mountainous regions located in the uplift showed significant increases in precipitation, stretching from the Pamir Plateau in the west to the Qilian Mountains in the east. These mountainous areas also experienced different changes in the rainfall seasonality with the greatest increases occurring during the respective rainy seasons, predominantly resulted from the enhanced orographically forced upwind ascents. The appearance of the major deserts in the inland Asia further reduced precipitation in the region and led to increased dust emission and deposition fluxes, while the spatial patterns of dust deposition were also changed, not only in the regions of uplift-impacted topography, but also in the downwind regions. One major contribution from this study is the comparison of the simulation results with 11 existing geological records representing the moisture conditions from Miocene to Pliocene. The comparisons revealed good matches between the simulation results and the published geological records. Therefore, we conclude that the NTP uplift and the related formation of the major deserts played a controlling role in the evolution of regional climatic conditions in a broad region in inland Asia since the Miocene.

Anna In-Between: Caribbean and not Caribbean: attachment, loss and strange Longing: a conversation with Elizabeth Nunez

Presents an interview with Elizabeth Nunez, author and professor. Nunez discusses the issues on migration, family, and intimacy which are the topics of her novel "Anna In-Between." She explains the demands of the publishing industry that cast a shadow in the world of the novel and the real world of Caribbean writers. This interview was translated by Maria Lusia Ruiz.

Collective financing among Chinese entrepreneurs and department store retailing in China

Chinese entrepreneurship in department store retailing differed from that seen in other emerging economies before 1940. Rather than the leading examples of the format being owned by advanced economy firms, in China a small group of Cantonese entrepreneurs established what became known as the ‘Big Four’ department stores in Shanghai. By 1940 the ‘Big Four’ department stores were among the most famous stores in China, and among the biggest businesses in China. None of these Chinese entrepreneurs had any prior experience in department store retailing. Rather this article explains how their success in department store retailing was dependent on a business model that enabled these Chinese entrepreneurs to act as informal investment bankers (or ‘shadow’ banks) for the thousands of overseas Chinese wanting to invest surplus savings in mainland China, so creating large indigenous business groups.

Workshop: sensory objects

The Sensory Objects project was represented by co-researchers Judith Appiah and Tim Elson supported by Beverley Agard from the Tower Project, who co-presented with Nic and Kate at ENGAGE 2014 conference in Bristol.

On the detection and attribution of gravity waves generated by the 20 March 2015 solar eclipse

Internal gravity waves are generated as adjustment radiation whenever a sudden change in forcing causes the atmosphere to depart from its large-scale balanced state. Such a forcing anomaly occurs during a solar eclipse, when the Moon’s shadow cools part of the Earth’s surface. The resulting atmospheric gravity waves are associated with pressure and temperature perturbations, which in principle are detectable both at the surface and aloft. In this study, surface pressure and temperature data from two UK sites at Reading and Lerwick are analysed for eclipse-driven gravity-wave perturbations during the 20 March 2015 solar eclipse over north-west Europe. Radiosonde wind data from the same two sites are also analysed using a moving parcel analysis method, to determine the periodicities of the waves aloft. On this occasion, the perturbations both at the surface and aloft are found not to be confidently attributable to eclipse-driven gravity waves. We conclude that the complex synoptic weather conditions over the UK at the time of this particular eclipse helped to mask any eclipse-driven gravity waves.

Aerosol properties, in-canopy gradients, turbulent fluxes and VOC concentrations at a pristine forest site in Amazonia

Aerosol physical and chemical properties were measured in a forest site in central Amazonia (Cuieiras reservation, 2.61S; 60.21W) during the dry season of 2004 (Aug-Oct). Aerosol light scattering and absorption, mass concentration, elemental composition and size distributions were measured at three tower levels (Ground: 2 m; Canopy: 28 m, and Top: 40 m). For the first time, simultaneous eddy covariance fluxes of fine mode particles and volatile organic compounds (VOC) were measured above the Amazonian forest canopy. Aerosol fluxes were measured by eddy covariance using a Condensation Particle Counter (CPC) and a sonic anemometer. VOC fluxes were measured by disjunct eddy covariance using a Proton Transfer Reaction Mass Spectrometer (PTR-MS). At nighttime, a strong vertical gradient of phosphorus and potassium in the aerosol coarse mode was observed, with higher concentrations at Ground level. This suggests a source of primary biogenic particles below the canopy. Equivalent black carbon measurements indicate the presence of light-absorbing aerosols from biogenic origin. Aerosol number size distributions typically consisted of superimposed Aitken (76 nm) and accumulation modes (144 nm), without clear events of new particle formation. Isoprene and monoterpene fluxes reached respectively 7.4 and 0.82 mg m(-2) s(-1) around noon. An average fine particle flux of 0.05 +/- 0.10 10(6) m(-2) s(-1) was calculated, denoting an equilibrium between emission and deposition fluxes of fine mode particles at daytime. No significant correlations were found between VOC and fine mode aerosol concentrations or fluxes. (C) 2009 Elsevier Ltd. All rights reserved.

Patterns of water and heat flux across a biome gradient from tropical forest to savanna in Brazil

We investigated the seasonal patterns of water vapor and sensible heat flux along a tropical biome gradient from forest to savanna. We analyzed data from a network of flux towers in Brazil that were operated within the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA). These tower sites included tropical humid and semideciduous forest, transitional forest, floodplain (with physiognomies of cerrado), and cerrado sensu stricto. The mean annual sensible heat flux at all sites ranged from 20 to 38 Wm(-2), and was generally reduced in the wet season and increased in the late dry season, coincident with seasonal variations of net radiation and soil moisture. The sites were easily divisible into two functional groups based on the seasonality of evaporation: tropical forest and savanna. At sites with an annual precipitation above 1900 mm and a dry season length less than 4 months (Manaus, Santarem and Rondonia), evaporation rates increased in the dry season, coincident with increased radiation. Evaporation rates were as high as 4.0 mm d(-1) in these evergreen or semidecidous forests. In contrast, ecosystems with precipitation less than 1700 mm and a longer dry season (Mato Grosso, Tocantins and Sao Paulo) showed clear evidence of reduced evaporation in the dry season. Evaporation rates were as low as 2.5 mm d(-1) in the transitional forests and 1 mm d(-1) in the cerrado. The controls on evapotranspiration seasonality changed along the biome gradient, with evaporative demand (especially net radiation) playing a more important role in the wetter forests, and soil moisture playing a more important role in the drier savannah sites.

Observation in the MINOS far detector of the shadowing of cosmic rays by the sun and moon

The shadowing of cosmic ray primaries by the moon and sun was observed by the MINOS far detector at a depth of 2070 mwe using 83.54 million cosmic ray muons accumulated over 1857.91 live-days. The shadow of the moon was detected at the 5.6 sigma level and the shadow of the sun at the 3.8 sigma level using a log-likelihood search in celestial coordinates. The moon shadow was used to quantify the absolute astrophysical pointing of the detector to be 0.17 +/- 0.12 degrees. Hints of interplanetary magnetic field effects were observed in both the sun and moon shadow. Published by Elsevier B.V.

Keratinocyte growth factor: a new mesothelial targeted therapy to reduce postoperative pericardial adhesions

Background: Several methods have been utilized to prevent pericardial and retrosternal adhesions, but none of them evaluated the mesothelial regenerative hypothesis. There are evidences that the mesothelial trauma reduces pericardial fibrinolytic capability and induces an adhesion process. Keratinocyte growth factor (KGF) has proven to improve mesothelial cells proliferation. This study investigated the influence of keratinocyte growth factor in reducing post-surgical adhesions. Methods: Twelve pigs were operated and an adhesion protocol was employed. Following a stratified randomization, the animals received a topical application of KGF or saline. At 8 weeks, intrapericardial adhesions were evaluated and a severity score was established. The time spent to dissect the adhesions and the amount of sharp dissection used, were recorded. Histological sections were stained with sirius red and morphometric analyses were assessed with a computer-assisted image analysis system. Results: The severity score was lower in the KGF group than in the control group (11.5 vs 17, p = 0.005). The dissection time was lower in the KGF group (9.2 +/- 1.4 min vs 33.9 +/- 9.2 min, p = 0.004) and presented a significant correlation with the severity score (r = 0.83, p = 0.001). A significantly less sharp dissection was also required in the KGF group. Also, adhesion area and adhesion collagen were significantly tower in the KGF group than in the control group. Conclusion: The simulation of pericardial cells with KGF reduced the intensity of postoperative adhesions and facilitated the re-operation. This study suggests that the mesothelial regeneration is the new horizon in anti-adhesion therapies. (C) 2008 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

Motion Detection for Video Surveillance

This thesis is related to the broad subject of automatic motion detection and analysis in videosurveillance image sequence. Besides, proposing the new unique solution, some of the previousalgorithms are evaluated, where some of the approaches are noticeably complementary sometimes.In real time surveillance, detecting and tracking multiple objects and monitoring their activities inboth outdoor and indoor environment are challenging task for the video surveillance system. Inpresence of a good number of real time problems limits scope for this work since the beginning. Theproblems are namely, illumination changes, moving background and shadow detection.An improved background subtraction method has been followed by foreground segmentation, dataevaluation, shadow detection in the scene and finally the motion detection method. The algorithm isapplied on to a number of practical problems to observe whether it leads us to the expected solution.Several experiments are done under different challenging problem environment. Test result showsthat under most of the problematic environment, the proposed algorithm shows the better qualityresult.

Evaluation of Red Colour Segmentation Algorithms in Traffic Signs Detection

Colour segmentation is the most commonly used method in road signs detection. Road sign contains several basic colours such as red, yellow, blue and white which depends on countries.The objective of this thesis is to do an evaluation of the four colour segmentation algorithms. Dynamic Threshold Algorithm, A Modification of de la Escalera’s Algorithm, the Fuzzy Colour Segmentation Algorithm and Shadow and Highlight Invariant Algorithm. The processing time and segmentation success rate as criteria are used to compare the performance of the four algorithms. And red colour is selected as the target colour to complete the comparison. All the testing images are selected from the Traffic Signs Database of Dalarna University [1] randomly according to the category. These road sign images are taken from a digital camera mounted in a moving car in Sweden.Experiments show that the Fuzzy Colour Segmentation Algorithm and Shadow and Highlight Invariant Algorithm are more accurate and stable to detect red colour of road signs. And the method could also be used in other colours analysis research. The yellow colour which is chosen to evaluate the performance of the four algorithms can reference Master Thesis of Yumei Liu.

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Trätorn : Kan det vara något för svensk vindkraft i skogsmiljö?

Inom ramen för projektet Energi- och miljökompetenscentrum vid Högskolan Dalarna haren kortare förstudie kring tekniken som används av Timber Tower GmbH för högavindkrafttorn i trä gjorts. Huvudsyftet med studien har varit att titta närmare på teknikenoch dess potential för svensk landbaserad vindkraft samt utreda vad detta kan innebära förregionen.Trenden för landbaserad vindkraft i skogsmiljö går mot allt högre torn. Skogsmiljön gör attden marknära turbulensen och vindgradienten blir större än över t.ex. hav vilket gör detmer föredelaktigt att använda högre torn.Tekniken som Timber Tower GmbH använder är att bygga tornet på plats med en koniskhålstomme av plana paneler av korslimmat limträ (som annars främst används vidbyggnation av höga hus med massivträstomme). Tekniken är skyddad av ett flertalpatentansökningar varav minst en är beviljad.Vid en jämförelse mellan trätorn och svetsade ståltorn (som är den dominerandetorntekniken idag) kan det konstateras att trätornstekniken är ekonomiskt intressant.Framförallt blir trätornen mer intressanta i jämförelse med ståltornen vi ökande höjder (>100 m) pga. dess transportfördelar. Vidare bör det nämnas att de torntekniker somanvänds idag vid höjder runt 140 m och högre främst är fackverkstorn i stål ochhybridtorn med en hög bas av förspänd betong och övre delen i stål.Då ett typgodkännande av ett vindkraftverk gäller torn och turbin är det i praktiken alltidturbintillverkaren som prissätter och levererar ett komplett vindkraftverk. Medutgångspunkt i regeringens planeringsram för svensk vindkraftutbyggnad (20 TWh/årlandbaserad vindkraft 2020) kan dock marknadsvärdet för torn uppskattas till 2-3 miljarderkr/år fram till 2020. För trätorn motsvarar detta en årlig potentiell volym på ca 190 000 m3.Slutsatsen i denna korta studie är att det är tekniskt möjligt att designa ett trätorn i rimligadimensioner för en 2-3 MW turbin med navhöjd ca 140 m och att detta sannolikt även ärekonomiskt intressant. Då ett trätorn blir något lättare än motsvarande ståltorn går det åtmindre energi för att göra ett trätorn. Hur mycket mindre är dock osäkert pga. den storaspridningen i siffror för energiåtgång för stålproduktion och i praktiken blir skillnadenäven leverantörsberoende. Eftersom andelen förnyelsebar energi är betydligt större vidtillverkningen av materialet för trätornen kommer trätornet att ge en betydande sänkningpå utsläppt CO2e/kWhel jämfört med motsvarande verk med ståltorn. Ett annat argumentför trätorn är förenklade transporter jämfört med t.ex. svetsade ståltorn eller hybridtornmed prefabricerade betongelement.Om tekniken etableras kan det i förlängningen leda till en regional påverkan i form av ökatlokalt innehåll i vindkraftprojekten t.ex. genom ökade råvaruleveranser (eg. sågat ochtorkat virke), lokal produktion av korslimmat limträ eller exempelvis bildande avspecialiserade montagefirmor. Det största hindret för tekniken just nu är dessmarknadsintroduktion och acceptans samt typgodkännande tillsammans med en för svenskmarknad intressant turbinleverantör. För att få acceptans för tekniken krävs byggande ochutvärdering av minst ett verk med trätorn. En intressant storlek för marknaden är en 2-3MW turbin med navhöjd ca 140 m. Ett sådant verk skulle i så fall få det högstavindkrafttornet i Sverige och sannolikt det högsta vindkrafttornet i trä i världen. Byggandetav ett första verk med trätorn skulle sannolikt även kräva ett behov av stödfinansiering föratt täcka en projektörs ökade risk. Då flera vindkraftetableringar i regionen uppvisar godaproduktionsresultat (med Tavelberget som gott exempel) visar det att regionen ärintressant för introduktion och utvärdering av ny teknologi.

Techno-economic Appraisal of Concentrating Solar Power Systems (CSP)

The diffusion of Concentrating Solar Power Systems (CSP) systems is currently taking place at a much slower pace than photovoltaic (PV) power systems. This is mainly because of the higher present cost of the solar thermal power plants, but also for the time that is needed in order to build them. Though economic attractiveness of different Concentrating technologies varies, still PV power dominates the market. The price of CSP is expected to drop significantly in the near future and wide spread installation of them will follow. The main aim of this project is the creation of different relevant case studies on solar thermal power generation and a comparison betwwen them. The purpose of this detailed comparison is the techno-economic appraisal of a number of CSP systems and the understanding of their behaviour under various boundary conditions. The CSP technologies which will be examined are the Parabolic Trough, the Molten Salt Power Tower, the Linear Fresnel Mirrors and the Dish Stirling. These systems will be appropriatly sized and simulated. All of the simulations aim in the optimization of the particular system. This includes two main issues. The first is the achievement of the lowest possible levelized cost of electricity and the second is the maximization of the annual energy output (kWh). The project also aims in the specification of these factors which affect more the results and more specifically, in what they contribute to the cost reduction or the power generation. Also, photovoltaic systems will be simulated under same boundary conditions to facolitate a comparison between the PV and the CSP systems. Last but not leats, there will be a determination of the system which performs better in each case study.

I skuggan av kulturella stereotypier : perspektiv på forskning om genus, jämställdhet och etniska relationer i Sverige

In the shadow of ethno-cultural stereotypes: gender, equity and ethnic relations in Sweden Scientific debates about cultural differences between ”Swedes” and migrants/ethnic minorities in Sweden have fuelled stereotypical categorizations and a socio-cultural demarcation between ”us” and ”them”. The authors argue that this development has underpinned constructions of foreignness. In the light of a critical review of the current debate on honour related violence, the authors discuss – inspired by Georg Simmel’s and Erving Goffman’s classic texts on the stranger, the stigma and the construction of foreignness – alternative understandings of culture and politics of belonging with a focus on gender, agency and identity formation. Formation of cultural and ethnic identity should be related, the authors conclude, to a dynamic interplay between the past and the present. Moreover, the social dimension should be highlighted, in order to avoid a stigmatizing culturalism.