Estudo retrospectivo (2007-2011) da casuística de cães com mastocitomas cutâneos atendidos em um hospital-escola

Neoplasms of mast cell origin are uncommon in most animal species. Although cases of cutaneous mastocitoma (CM) are rare in humans, it is the second most diagnosed cancer in dogs, accounting for approximately 20% of cutaneous tumors in this species. The age group most frequently affected is between eight and nine years, but it may occur in animals up to three weeks old. This study aimed to describe the epidemiological, hematological and histopathological characteristics of 73 dogs with cutaneous mast cell tumors attended between 2007 and 2011 by the Oncology Service of a teaching hospital in the state of São Paulo. Data collected included race, age, sex, weight, skin region affected, blood tests results at the first consultation and histopathological grading of dogs diagnosed with this neoplasia.

Consumo de combustível de um trator agrícola em função do tipo de soloe da pressão de inflação nos pneus utilizando o equipamento canteirador

Agricultural mechanization improved the efficiency of field operations by providing an increase in crop production. The intensified mechanization, however, has led to higher energy use mainly in the area of fuel consumption. The objective of this study was to compare the fuel consumption of tractors using two different tire pressures for two different types of soil during tillage with irrigated cotton in semi-arid regions. These tests were performed at the Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona with a Case 4x2 TDA 88kW equipped with an autopilot system. The results showed lower fuel consumption using a tire pressure of 124 kPa on sandy clay loan soil.

Consumo de combustível de um trator agrícola no preparo do solo para a cultura do algodão irrigado em função da pressão de inflação nos pneus

Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.

Determinação do rendimento na barra de tração de tratores agrícolas com tração dianteira auxiliar (4X2 TDA)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do desgaste das garras dos pneus e das condições superficiais do solo nas operações de campo de um trator agrícola

The objective of this work was to compare the performance of a tractor equipped with used and new bias-ply tires (63.4% and 41.2%, front and rear tire waste, respectively), in three surface conditions: tillage soil, vegetal covered soil and firm soil. Field data were collected to calculate: forward speed, front and rear slippage tires, drawbar pull, available power at drawbar bar and fuel consumption. Results showed that both, tires and soil conditions, changed tractor capacity on developing drawbar traction. The worst performance was observed on tillage soil. The best performance of the tractor was observed at firm soil track. On the track with tilled soil, results showed that the forward speed was the lowest among the three soil conditions due to the front and rear slippage tires which was higher than vegetal covered and firm soil tracks. Fuel consumption results showed higher values on tilled tracks when compared with firm and vegetal covered tracks. The fuel consumption levels evaluated on bias-ply tires lead to significant changes on tractor’s performance at tilled soil, indicating that, at this condition, it’s necessary to replace the used tires by new tires. For vegetal covered soil operations, and also on firm soil conditions, used tires, at studied levels, indicated that these tires might still be used without tractor performance changing.

Capacidade de suporte de carga e densidade do solo em áreas de plantio direto com e sem escarificação

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

O impacto social dos serviços de convivência e fortalecimento de vínculos para pessoas idosas: um estudo sob a ótica dos trabalhadores do SUAS

Pós-graduação em Serviço Social - FCHS

Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin

Interview with Anna Heriot Dixon

Anna Dixon, in her July 1974 interview with Ann Yarborough, described the lifestyle and traditions she experienced during her years as a student at what is now Winthrop University (then Winthrop Normal and Industrial College). Dixon graduated in 1917 and covered topics such as being campused, the train station, education for women, uniforms, curriculum, and the training school. She also touched on what might get a girl expelled and how the students were graded. This interview was conducted for inclusion into the Louise Pettus Archives and Special Collections Oral History Program.

RB32-270 A Seven Year Study of a Milk Supply

The amount of butter produced by the grain-belt states is evidence that a great many cows are milked by the midwestern farmer. Most of this milk is separated on the farm, the cream is sold, and the skimmilk is fed to hogs and other livestock. As the market for fluid milk has developed, many farmers near the cities have turned to the sale of milk, because it affords a better return for the butterfat sold. Much of the milk produced for sale as fluid milk is produced under practically the same conditions as milk which is produced primarily for the same of cream. The Department of Dairy Husbandry of the University of Nebraska, in conducting its instructional and investigational work, comes in contact with the milk producer. An effort has been made, therefore, to study the relation of milk quality to farm conditions as found among the milk producers or patrons who have delivered milk to the department. The study was carried on in an effort to find possible ways of bettering the conditions without upsetting the economic balance existing between the production of cream and fluid milk.

EC34-48 Farm Sheep Facts

The farm flock and the fattening of western feeder lambs are the only methods of sheep production of importance in Nebraska. The farm flock is not a major enterprise on Nebraska farms. It serves as a side line on farms having a well-drained place which sheep may call their own. This 1934 extension circular contains information on: Nebraska Sheep-industry facts; market, ewe, ram, and lamb facts; shearing and wool facts; two parasites and one pest; grading and marketing wool; and scouring and carding wool for home use.

Oral Presentation: Exploring Oral Presentations of Homework Problems as a Means of Assessing Homework

In this action research study of my freshmen Algebra I class, I investigated a method of assessing homework based on completion and presentations. When I changed the method of grading from checking answers to looking for completion and presentation of selected problems, I found that the majority of the students enjoyed the method because it allowed them to explore other methods of solving and helped them gain an understanding of the problems. This resulted in less stress on obtaining “the” answer. I also realized that I viewed homework differently and had a better understanding of the students’ thought processes, which caused me to check tests differently. These results led to a better relationship between the students and myself. As a result of this research, I plan to change my methods of assessing homework from the traditional right or wrong to a rubric assessment based on presentations and completion of the assignment.

Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin