La religión micénica en las tablillas de Tebas

Esta tesis doctoral examina las tablillas en Lineal B de Tebas y su contexto arqueológico con el fin de reconstruir el sistema de creencias y las prácticas religiosas llevadas a cabo en la ciudad de Tebas en época micénica. Desde 1964 han ido apareciendo tablillas micénicas en el sitio tebano y urgía hacer un estudio exhaustivo de las evidencias textuales y arqueológicas. Por otro lado, el descubrimiento de las tablillas Pelopidou entre 1993 y 1995 abrió nuevas posibilidades para el estudio de la religión micénica. La editio princeps del corpus de tablillas Pelopidou, publicada en 2001, enalteció el debate e hizo correr ríos de tinta al respecto. La controversia surgida entre los especialistas en lenguas egeas se debió fundamentalmente a la interpretación religiosa defendida por los editores: Vassilis Aravantinos, Louis Godart y Anna Sacconi (AGS). Esta interpretación propició que los estudiosos se posicionaran rápidamente a favor o en contra de la teoría de AGS y que propusieran posibles explicaciones alternativas. La variedad de opiniones esgrimidas en los últimos años, lejos de ayudar a conseguir una interpretación aceptada por la mayoría, ha confrontado a los expertos y causado, al contrario, el fracaso en el logro de una solución satisfactoria. Así que, a día de hoy tenemos que lamentar que no existe un consenso sobre el significado y función de las tablillas tebanas. Esta tesis sigue un enfoque interdisciplinario y presenta, en primer lugar, los datos arqueológicos con especial atención al contexto de las fuentes escritas. A continuación, se exponen las características epigráficas de las series que contienen datos relativos a la religión. Se presta especial atención a ciertos datos como el significado de los logogramas o las abreviaturas y se señalan paralelos con series de otros archivos micénicos...

Vida universitaria: testimonio del animado movimiento en la máxima casa de estudios

Con 60 años de historia, en las páginas de Vida Universitaria está impreso con tinta indeleble el esfuerzo de todos aquellos que lo han hecho posible, desde los antiguos oficios, hoy desaparecidos, como el de formadores y linotipistas, hasta el de reporteros, fotógrafos y prensistas. Memoria Universitaria trata de recapitular en esta breve reseña el origen de la gran tradición en la que esta fincada su vida universitaria.

Comparação de métodos analíticos na quantificação do teor de Gapapentina em diversas cápsulas de diversos laboratórios

Dissertação de mestrado, Ciências Farmacêuticas, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Electrical characterization of electronic circuits produced by inkjet printing

Dissertação de Mestrado, Engenharia Electrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Fotodegradação de pesticidas: caso do fenarimol

Tese dout. em Química, Unidade de Ciências Exactas e Humanas, Univ. do Algarve, 1997

Biological and chemical strategies for the recovery of precious and rare metals as nanoparticles

Tese de Doutoramento, Ciências do Mar da Terra e do Ambiente, Ramo: Ciências e Tecnologias do Ambiente, Especialidade em Biotecnologia, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

A RBES for Generating Automatically Personalized Menus

Food bought at supermarkets in, for instance, North America or the European Union, give comprehensive information about ingredients and allergens. Meanwhile, the menus of restaurants are usually incomplete and cannot be normally completed by the waiter. This is specially important when traveling to countries with a di erent culture. A curious example is "calamares en su tinta" (squid in its own ink), a common dish in Spain. Its brief description would be "squid with boiled rice in its own (black) ink", but an ingredient of its sauce is flour, a fact very important for celiacs. There are constraints based on religious believes, due to food allergies or to illnesses, while others just derive from personal preferences. Another complicated situation arise in hospitals, where the doctors' nutritional recommendations have to be added to the patient's usual constraints. We have therefore designed and developed a Rule Based Expert System (RBES) that can address these problems. The rules derive directly from the recipes of the di fferent dishes and contain the information about the required ingredients and ways of cooking. In fact, we distinguish: ingredients and ways of cooking, intermediate products (like sauces, that aren't always made explicit) and final products (the dishes listed in the menu of the restaurant). For a certain restaurant, customer and instant, the input to the RBES are: actualized stock of ingredients and personal characteristics of that customer. The RBES then prepares a "personalized menu" using set operations and knowledge extraction (thanks to an algebraic inference engine [1]). The RBES has been implemented in the computer algebra system MapleTM2015. A rst version of this work was presented at "Applications of Computer Algebra 2015" (ACA'2015) conference. The corresponding abstract is available at [2].

Adição de poliuretana em pastas de cimento para poços de petróleo como agente de correção do filtrado

Chemical admixtures, when properly selected and quantified, play an important role in obtaining adequate slurry systems for quality primary cementing operations. They assure the proper operation of a well and reduce costs attributed to corrective cementing jobs. Controlling the amount lost by filtering through the slurry to permeable areas is one of the most important requirements in an operation, commonly controlled by chemical admixtures, such as carboxymethylcellulose (CMC). However, problems related to temperature, salttolerance and the secundary retarding effect are commonly reported in the literature. According to the scenario described above, the use of an aqueous dispersion of non-ionic poliurethane was proposed to control the filter loss, given its low ionic interaction with the free ions present in the slurries in humid state. Therefore, this study aims at assessing the efficiency of poliurethane to reduce filter loss in different temperature and pressure conditions as well as the synergistic effect with other admixtures. The temperatures and pressures used in laboratory tests simulate the same conditions of oil wells with depths of 500 to 1200 m. The poliurethane showed resistance to thermal degradation and stability in the presence of salts. With the increase in the concentration of the polymer there was a considerable decrease in the volume lost by filtration, and this has been effective even with the increase in temperature

Estudo de reatores eletroquímicos para remoção de Cu2+ , Zn2+, Fenol e BTEX em água produzida

The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Desenvolvimento de uma nanoformulação autoemulsificante contendo o alcaloide epiisopiloturina para melhorar sua biodisponibilidade plasmática após administração via oral

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Programa de Pós-Graduação em Nanociência e Nanobiotecnologia, 2016.

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Arte meditativo y contemplativo en la pintura budista china: el camino del silencio sagrado

En el budismo existen dos tipos de meditación: analítica y de concentración. Teniendo en cuenta que la mente es la causa de todas las creaciones artísticas, y que la pintura es considerada por el budismo una práctica más de meditación, se analizarán los procesos que llevan a la realización de una pintura, pudiendo hacerse una división en dos grandes grupos y denominarlas “pinturas meditativas” de concentración, que siguen la escuela Chan, y “pinturas meditativas” analíticas, que siguen el resto de las escuelas Chinas. . Las pinturas de meditación de concentración suelen ser completadas en una sola sesión y con una sola tinta. De composiciones muy sencillas, libres y espontáneas son realizadas en la intimidad e igualmente contempladas en soledad. Analizaremos sus características, el proceso y la motivación con que fueron realizadas estas pinturas defendiendo la hipótesis de que eran para los monjes budistas, un ejercicio de meditación individual de atención plena cuyo medio y resultado es una creación artística. Las pinturas de meditación analítica son imágenes más complejas, que se realizan en varias sesiones y con la incorporación de más elementos y colores. Las hemos clasificado en: figurativas, ilustrativas y devocionales. Las figurativas se centran solo en la representación de las imágenes de manera individual y se realizan en su gran mayoría, sobre papel o seda. Las ilustrativas sirven para mostrar todo el universo budista, y se representan en diferentes soportes, incluidas las pinturas murales de templos, santuarios y monasterios. Y las devocionales, realizadas para infundir devoción a los fieles y utilizadas para ceremonias y rituales o realizadas por encargo de devotos que se hacen retratar junto a las deidades; también como muestra de respeto y devoción a los Maestros del Dharma. Básicamente, la diferencia entre las pinturas meditativas de concentración y las analíticas es el propósito de la práctica, el tiempo de realización y la técnica utilizada; y para demostrar esta hipótesis, se ha realizado un estudio comparativo de obras pictóricas que se han seleccionado cuidadosamente para este efecto. Desde el punto de vista budista, la contemplación puede ser introvertida (la mente que se contempla a sí misma) o extrovertida (la mente contempla el mundo exterior que nos rodea). Analizando las imágenes seleccionadas, podemos apreciar que la finalidad de las pinturas budistas es dar a conocer estos procesos que muestran los dos aspectos de la contemplación. Hablaremos de la percepción visual desde el punto de vista budista, que trata de analizar la naturaleza de la mente y los factores mentales que crean el universo pictórico; primero observando la realidad externa a través de las ventanas de los sentidos, luego interiorizando las formas que percibimos para finalmente pintarlas, utilizando las diferentes técnicas de representación. Presentamos una visión histórica de cómo el budismo se fue adaptando y sincretizando con las diferentes culturas que encuentra a su paso a través de la Ruta de la Seda hasta llegar a China. Se comentará el largo proceso de la traducción de los textos y de la creación de las escuelas budistas de origen Indio y Chino. Y se abordarán los periodos de auge, consolidación y declive del budismo a lo largo de la historia. En los últimos capítulos de la tesis detallaremos algunos de los santuarios budistas más importantes de la Ruta de la Seda, y finalmente hablaremos de los pintores chinos, entre los que encontramos monjes budistas o artistas profesionales .

¿Y la memoria para qué? participación política de mujeres víctimas del conflicto armado. Estudio de caso: ruta pacífica de las mujeres (2005-2014)

El interés de este Estudio de Caso es identificar y explicar los alcances de la construcción de memoria en la sociedad colombiana, no sólo como elemento de no olvido sino también como herramienta de resistencia y de acción de aquellos que la construyen y reconstruyen. Por ello, la investigación pretende determinar el vínculo existente entre memoria y participación política, analizando y explicando la manera como mujeres pertenecientes a Ruta Pacífica de las Mujeres han construido memoria respecto a los procesos de violencia que enfrentan y la forma como ello ha hecho posible la consolidación de una identidad colectiva por medio de la cual resisten a la violencia y a los códigos culturales que la perpetúan. En consecuencia, se efectúa un análisis a los documentos elaborados por Ruta Pacífica respecto a construcción de memoria y junto con ello, un examen a los procesos participativos que han adelantado las mujeres pertenecientes a Ruta Pacífica.