High-anthocyanin strawberries through cultivar selection

BACKGROUND: Diets high in fruit and vegetables are known to have significant health benefits. This is in part due to the presence of phytochemicals, which possess potential protective health benefits. This study focuses on the ability of strawberries to be bred for higher anthocyanin content. This is a major contributor to the characteristic colour and nutritional value of ripe strawberries, together with phenolic acids, ascorbic acid and total antioxidant capacity. RESULTS: Anthocyanins in five commercial strawberry cultivars and three breeding lines were assessed. This led to the discovery of one breeding line (BL 2006-221) as an exceptional source of anthocyanins (approximate to 1 g kg1 fresh weight), with approximately double the levels of current commercial cultivars. Temperature was shown to influence anthocyanin extraction, with 40 degrees C being the best extraction temperature using the accelerated solvent extraction (ASE) method. Hue angle and anthocyanin concentration showed a good correlation (r2 = 0.69). CONCLUSION: The new breeding line BL 2006-221 has the potential to be used in the development of phytochemically rich strawberry cultivars. Using hue angle as a screening tool for total anthocyanin concentration and extraction of anthocyanins from strawberries by ASE at 40 degrees C would support such cultivar development. (c) 2012 Commonwealth of Australia

Organized Nanostructures of Thermoresponsive Poly(N-isopropylacrylamide) Block Copolymers Obtained Through Controlled RAFT Polymerization

Kontrolloidut radikaalipolymerointimenetelmät, kuten RAFT-polymerointi, ovat moderni tapa valmistaa polymeerejä säädellysti. RAFT-polymeroinnilla polymeerien ketjunpituutta, moolimassajakaumaa, mikrorakennetta (taktisuus, järjestys), koostumusta ja funktionaalisuutta kyetään hallitsemaan. Siten menetelmällä voidaan valmistaa uudenlaisia polymeeriarkkitektuureja, kuten blokki- ja tähtipolymeerejä, sekä hybridimateriaaleja ja biokonjugaatteja. Polymeeristen rakennuspalikoiden itsejärjestyminen, missä huolellisesti syntetisoidut polymeerit järjestyvät halutulla tavalla nanoskaalassa, on suosittu tutkimuskohde materiaalitieteessä. On huomattava, että blokkipolymeerien itsejärjestyminen on vielä suhteellisen nuori tutkimusaihe. Tämän hetkiset polymeeriset nanomateriaalit ovat suhteellisen yksinkertaisia luonnon luomuksiin verrattuina, tarjoten jatkuvasti uusia mahdollisuuksia seuraavan sukupolven polymeereille. Tässä työssä RAFT-polymeroinnilla syntetisoitiin amfifiilisiä di- ja triblokkikopolymeerejä sekä tutkittiin niiden järjestymistä nanorakenteiksi. Kaikissa blokkikopolymeereissä käytettiin lämpöherkkää poly(N-isopropyyliakryyliamidia). Siten polymeerit ja tutkitut materiaalit reagoivat lämpötilanmuutokseen ympäristössä eli ovat ns. ympäristöherkkiä. Työssä tutkittiin taktisuuden kontrollointia N-isopropyyliakryyliamidin RAFT-polymeroinnissa. Polymeerin taktisuutta sekä ketjunpituutta ja blokkijärjestystä säätämällä voitiin hallita polymeerin itsejärjestymistä vesiliuoksessa. Amfifiiliset polymeerit järjestyivät laimeissa vesiliuoksissa erilaisiksi misellirakenteiksi, muodostaen ns. mikrosäiliöitä. Tällaisilla polymeereillä odotetaan olevan sovelluksia esim. lääkeainevapautuksessa. Amfifiilejä käytetään myös esimerkiksi apuaineina pinnoitteissa ja kosmetiikassa. Kiinteässä tilassa tutkitut triblokkikopolymeerit muodostivat teoreettisesti ennustettuja morfologioita. Lämpöherkän materiaalin hydrogeelit toimivat suodatinmembraanina nanokokoluokassa. RAFT-polymeroinnilla syntetisoituja polymeereja voidaan sellaisenaan käyttää kultananopartikkeleiden päällystämiseen. Kultananopartikkelit ovat erittäin kiinostavia mm. niiden stabiilisuuden ja ainutlaatuisten pintaominaisuuksien vuoksi. Kun amfifiilisiä polymeerejä kiinnitettiin kultapartikkelin pinnalle, sen liuos- ja optisia ominaisuuksia voitiin säädellä pH:n ja lämpötilan avulla. Tällaisilla kultananopartikkeleilla on sovelluksia mm. diagnostiikassa, sensoreina ja solukuvauksessa.

Analysis of two degrees of freedom systems through weighted mean square linearization approach

In this paper a study of the free, forced and self-excited vibrations of non-linear, two degrees of freedom systems is reported. The responses are obtained by linearizing the nonlinear equations using the weighted mean square linearization approach. The scope of this approach, in terms of the type of non-linearities the method can tackle, is also discussed.

Remembering the Peel Island Lazaret through re-imagining the Teerk Roo Ra forest

This paper discusses my current research which aims to re-member the site of the Peel Island Lazaret through re-imagining the Teerk Roo Ra forest as a series of animated artworks. Teerk Roo Ra National Park (formally known as Peel Island) is a small island in Moreton Bay, Queensland and is visible on the ferry journey from Cleveland to Stradbroke Island. The island has an intriguing history, and is the site of a former Lazaret and quarantine station. The Lazaret treated patients diagnosed with Hansen’s disease (or Leprosy), and operated between 1907 and 1959. In this paper I will discuss conceptions of the non-indigenous historical context of the Peel Island Lazaret and the notion of the liminal state (Turner,1967). Through this discussion conceptions of place from Australian cultural theorist Ross Gibson are also examined. The concept of two overlapping realms is then explored through the clues and shared stories about the people who inhabited the site. There is then an explanation of my own approach to re-member this place through re-imagining the forest that witnessed the events of the Lazaret. I then draw on theories of the uncanny from German Psychiatrist Ernst Jentsch, Austrian Neurologist Sigmund Freud and South African animation theorist Meg Rickards to argue that my experience of the forest of Teerk Roo Ra was an uncanny experience where two worlds or states of mind existed simultaneously and overlapped, causing a viscerally unsettling uncanny experience. Through an analysis of Czech Surrealist Animator Jan Švankmajer’s cinematic narrative Down to the cellar (1982), my creative work Structure #24(2011), and Australian Artist Patricia Piccinini’s cinematic artwork The Gathering (2007), I discuss the situation of the inanimate and the animate co-existing simultaneously. Using this approach I propose an understanding of the uncanny as an intellectual uncertainty as outlined by Jentsch (1906). I also develop the notion of the familiar being concealed and becoming unfamiliar through mimicry (Freud, 1919). These discussions form an introduction to my creative work Nocturne #5(2014) which re-members the forests of Teerk Roo Ra as an uncanny place primarily expressed through animation.

Reducing falls in hospital through education to change patient and staff behaviour: A stepped wedge cluster randomised controlled effectiveness trial

Background: Falls remain the most frequent adverse event reported in hospitals, particularly geriatric rehabilitation wards. Randomised trials reducing fall injuries in hospitals have been elusive. Our previous randomised trial (n = 1206) demonstrated that multimedia education with physiotherapist falls educator support reduced falls among patients with higher cognition levels, but this benefit was offset by a potential increase in falls rates among patients with poor cognition. In the previous trial, hospital staff were blinded to the allocation of individual patients, and only delivered usual care.

On a finite element model for the analysis of through cracks in laminated anisotropic cylindrical shells

A finite element model for the analysis of laminated composite cylindrical shells with through cracks is presented. The analysis takes into account anisotropic elastic behaviour, bending-extensional coupling and transverse shear deformation effects. The proposed finite element model is based on the approach of dividing a cracked configuration into triangular shaped singular elements around the crack tip with adjoining quadrilateral shaped regular elements. The parabolic isoparametric cylindrical shell elements (both singular and regular) used in this model employ independent displacement and rotation interpolation in the shell middle surface. The numerical comparisons show the evidence to the conclusion that the proposed model will yield accurate stress intensity factors from a relatively coarse mesh. Through the analysis of a pressurised fibre composite cylindrical shell with an axial crack, the effect of material orthotropy on the crack tip stress intensity factors is shown to be quite significant.

Mapping the carriage of flaA-restriction fragment length polymorphism Campylobacter genotypes on poultry carcasses through the processing chain and comparison to clinical isolates

Poultry are considered a major source for campylobacteriosis in humans. A total of 1866 Campylobacter spp. isolates collected through the poultry processing chain were typed using flaA-restriction fragment length polymorphism to measure the impact of processing on the genotypes present. Temporally related human clinical isolates (n = 497) were also typed. Isolates were obtained from whole chicken carcass rinses of chickens collected before scalding, after scalding, before immersion chilling, after immersion chilling and after packaging as well as from individual caecal samples. A total of 32 genotypes comprising at least four isolates each were recognised. Simpson's Index of Diversity (D) was calculated for each sampling site within each flock, for each flock as a whole and for the clinical isolates. From caecal collection to after packaging samples the D value did not change in two flocks, decreased in one flock and increased in the fourth flock. Dominant genotypes occurred in each flock but their constitutive percentages changed through processing. There were 23 overlapping genotypes between clinical and chicken isolates. The diversity of Campylobacter is flock dependant and may alter through processing. This study confirms that poultry are a source of campylobacteriosis in the Australian population although other sources may contribute.

Enterprise education: Learning through personal experience

This paper outlines the development of a reflective process through which student feelings are brought to the surface to advance their learning outcomes. A key notion in relation to the capacity of student development is the ability of students to alter their collective habits of thought and in turn the nature of the learning environment. The paper examines student reflection in the context of students' heightened awareness of self and their potential influence on their environment. The notion of 'surfacing feelings' is used to describe the outcome of individual and group reflection through which several parties become aware of the active reflections of individual students, thereby increasing the potential depth of overall reflection. Finally, the author considers the transferability of the ideas discussed to other educational contexts.

Reconfiguring agriculture through the relocation of production systems for water, environment and food security under climate change

The prospect of climate change has revived both fears of food insecurity and its corollary, market opportunities for agricultural production. In Australia, with its long history of state-sponsored agricultural development, there is renewed interest in the agricultural development of tropical and sub-tropical northern regions. Climate projections suggest that there will be less water available to the main irrigation systems of the eastern central and southern regions of Australia, while net rainfall could be sustained or even increase in the northern areas. Hence, there could be more intensive use of northern agricultural areas, with the relocation of some production of economically important commodities such as vegetables, rice and cotton. The problem is that the expansion of cropping in northern Australia has been constrained by agronomic and economic considerations. The present paper examines the economics, at both farm and regional level, of relocating some cotton production from the east-central irrigation areas to the north where there is an existing irrigation scheme together with some industry and individual interest in such relocation. Integrated modelling and expert knowledge are used to examine this example of prospective climate change adaptation. Farm-level simulations show that without adaptation, overall gross margins will decrease under a combination of climate change and reduction in water availability. A dynamic regional Computable General Equilibrium model is used to explore two scenarios of relocating cotton production from south east Queensland, to sugar-dominated areas in northern Queensland. Overall, an increase in real economic output and real income was realized when some cotton production was relocated to sugar cane fallow land/new land. There were, however, large negative effects on regional economies where cotton production displaced sugar cane. It is concluded that even excluding the agronomic uncertainties, which are not examined here, there is unlikely to be significant market-driven relocation of cotton production.

Creating employability skills in SMEs: Modification through interaction

This paper is concerned with the degree to which the graduate skills required by industry are developed in Australian universities. Despite acknowledgement of the need to increase the graduate skills of students, it would seem that the stated intentions of Australian universities in this respect do not yet meet the expectations of industry. The development of an enterprise program at the University of Tasmania provides by way of example, support that the development of industry-desired skills is possible alongside the desirable knowledge outcomes of a university. It is argued that lecturers and students must give and accept more responsibility for learning to enable the development of desirable graduate skills.

Topological stability through tame retractions

A smooth map is said to be stable if small perturbations of the map only differ from the original one by a smooth change of coordinates. Smoothly stable maps are generic among the proper maps between given source and target manifolds when the source and target dimensions belong to the so-called nice dimensions, but outside this range of dimensions, smooth maps cannot generally be approximated by stable maps. This leads to the definition of topologically stable maps, where the smooth coordinate changes are replaced with homeomorphisms. The topologically stable maps are generic among proper maps for any dimensions of source and target. The purpose of this thesis is to investigate methods for proving topological stability by constructing extremely tame (E-tame) retractions onto the map in question from one of its smoothly stable unfoldings. In particular, we investigate how to use E-tame retractions from stable unfoldings to find topologically ministable unfoldings for certain weighted homogeneous maps or germs. Our first results are concerned with the construction of E-tame retractions and their relation to topological stability. We study how to construct the E-tame retractions from partial or local information, and these results form our toolbox for the main constructions. In the next chapter we study the group of right-left equivalences leaving a given multigerm f invariant, and show that when the multigerm is finitely determined, the group has a maximal compact subgroup and that the corresponding quotient is contractible. This means, essentially, that the group can be replaced with a compact Lie group of symmetries without much loss of information. We also show how to split the group into a product whose components only depend on the monogerm components of f. In the final chapter we investigate representatives of the E- and Z-series of singularities, discuss their instability and use our tools to construct E-tame retractions for some of them. The construction is based on describing the geometry of the set of points where the map is not smoothly stable, discovering that by using induction and our constructional tools, we already know how to construct local E-tame retractions along the set. The local solutions can then be glued together using our knowledge about the symmetry group of the local germs. We also discuss how to generalize our method to the whole E- and Z- series.

Improving Profitability to Industry Through the Identification and Management of 'tough' Fish Syndrome in Tropical Saddletail Snapper (Lutjanus Malabaricus)

OBJECTIVES: 1. To determine whether incomplete rigor mortis resolution and 'cold shock' play a role in development of tough fish syndrome (TFS) in tropical Saddletail snapper. 2. To identify links between TFS and specific physiological factors in tropical Saddletail snapper. 3. Communicate findings and recommendations to stakeholders and assist with implementation of any changes to fishing or handling practices required.

In response: UV–vis light transmittance through tinted contact lenses and the effect of color on values

In the study, we used the Agilent 8453 spectrophotometer (which is equipped with a limiting aperture that restricts the light beam to the central 5 mm of the contact lens), to measure the transmittance of various coloured contact lenses including the one Day Acuvue define manufactured by Johnson and Johnson which the authors represent. We measured the instrument baseline before the transmittance spectra of lenses were tested. The values of lens transmittances were thus the difference between baseline and lens measurement at each time. The transmittance measurements were obtained at 0.5 nm intervals, from 200 to 700 nm after a soak in saline to remove the influence of any surface active agents within the packaging products. The technique used in our study was not very different from how other research studies [2], [3], [4], [5] and [6] have measured the spectra transmittances of contact lenses...